标准号 |
中文名称 |
英文名称 |
| BS 5871-1-2001 |
燃气炉、对流式加热器、回火锅炉和有装饰性燃料效果燃气器具规格.用1类、2类、3类家用燃气的燃气炉、对流式 |
(Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances - Gas fires, convector heaters, fire/back boilers and heating stoves (1st, 2) |
| BS 5871-2-2001 |
燃气炉、对流式加热器、回火锅炉和装饰性燃料效应燃气器具安装规范.第2部分:输入热量不超过15kW的插入式燃 |
(Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances - Inset live fuel effect gas fires of heat input not exceeding 15 kW, and fi) |
| BS 5871-3-2001 |
燃气炉、对流式加热器、回火锅炉和装饰性燃料效应燃气器具安装规范. 第3部分:输入热量不超过20kW的装饰性燃 |
(Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances - Decorative fuel effect gas appliances of heat input not exceeding 20 kW (2) |
| BS 5873-1-1980 |
教学家具.第1部分:教育机构用的桌椅的标志和完成及功能规格 |
(Educational furniture - Specification for functional dimensions, identification and finish of chairs and tables for educational institutions) |
| BS 5873-2-1991 |
教学家具.第2部分:教育机构用的椅子强度及稳定性规范 |
(Educational furniture - Specification for strength and stability of chairs for educational institutions) |
| BS 5873-3-1985 |
教学家具.第3部分:教育机构用的桌子的强度及稳定性规范 |
(Educational furniture - Specification for strength and stability of tables for educational institutions) |
| BS 5873-4-1998 |
教学家具.教育机构用的储存家具的强度及稳定性规范 |
(Educational furniture - Specification for strength and stability of storage furniture for educational institutions) |
| BS 5873-5-1998 |
教育设施.教育机构固定保护存储设施的安全性规范. |
(Educational furniture - Specification for security of fixed secure storage furniture for educational institutions) |
| BS 5876-1980 |
电视接收机主观观察试验指南 |
(Guide for subjective viewing tests for television receivers) |
| BS 5877-1980 |
无线电收音机主观收听试验指南 |
(Guide for subjective listening tests for sound radio receivers) |
| BS 5879-1980 |
纸浸水后尺寸变化的测量方法 |
(Method for measurement of dimensional change of paper after immersion in water) |
| BS 5880-1990 |
纸和纸板浸水后吸水量的测定方法 |
(Method for determination of water absorption of paper and board after immersion in water) |
| BS 5881-1980 |
整块纤维板单层重量(克数)的测定方法 |
(Method for determination of grammage of single layers of solid fibreboard) |
| BS 5882-1996 |
核设施全面质量保证方案规范 |
(Specification for a total quality assurance programme for nuclear installations) |
| BS 5883-1996 |
水面游泳护目眼镜规范 |
(Specification for surface swimming goggles) |
| BS 5884-1999 |
磁性材料.弱磁性材料的相对磁导率的测定方法 |
(Magnetic materials - Methods for the determination of the relative magnetic permeability of feebly magnetic materials) |
| BS 5886-1980 |
石棉水泥管路的现场压力试验方法 |
(Methods for field pressure testing of asbestos-cement pipelines) |
| BS 5889-1989 |
单一组分枪喷式硅酮基密封剂 |
(Specification for one-part gun grade silicone-based sealants) |
| BS 5890-1980 |
电容器和电阻器标志用颜色的选择指南 |
(Guide for choice of colours to be used for the marking of capacitors and resistors) |
| BS 5891-1980 |
农用挂车及牵引机具的环形连结器规范 |
(Specification for ring-type hitches on agricultural trailers and towed implements) |
| BS 5892-2-1992 |
铁路车辆材料.第2部分:锻造和轧制的轮体规范 |
(Railway rolling stock materials - Specification for forged and rolled wheel centres) |
| BS 5892-3-1992 |
铁路车辆材料.第3部分:牵引车辆及其以外的客货车辆单个车轮规范 |
(Railway rolling stock materials - Specification for monobloc wheels for traction and trailing stock) |
| BS 5892-4-1992 |
铁路车辆材料.第4部分:煅造和轧制轮箍规范 |
(Railway rolling stock materials - Specification for forged and rolled tyres) |
| BS 5892-5-1987 |
铁路车辆材料(米制).第5部分:轮箍式车轮扣环用条钢规范 |
(Railway rolling stock materials - Specification for steel bars for retaining rings for tyred wheels) |
| BS 5892-6-1992 |
铁路车辆材料.第6部分:牵引车辆及其以外的客货车辆轮组规范 |
(Railway rolling stock materials - Specification for wheelsets for traction and trailing stock) |
| BS 5895-1980 |
实验室装置用硼硅酸盐玻璃管规范 |
(Specification for borosilicate glass tubing for laboratory apparatus) |
| BS 5896-1980 |
预应力混凝土用高抗拉钢丝绞合线规范 |
(Specification for high tensile steel wire and strand for the prestressing of concrete) |
| BS 5898-1980 |
实验室用容量玻璃器皿的设计及制作原理规范 |
(Specification for principles of design and construction of volumetric glassware for laboratory use) |
| BS 5900-1999 |
带部分封闭车箱、无升降机井空间的住宅用电梯规范 |
(Specification for powered domestic lifts with partially enclosed cars and no lift-well enclosures) |
| BS 5904-1980 |
计算机程序设计语言RTL/2规范 |
(Specification for computer programming language RTL/2) |
| BS 5905-1980 |
计算机程序设计语言CORAL66规范 |
(Specification for computer programming language CORAL 66) |
| BS 5906-1980 |
建筑物内固体废弃物的存放及就地处理实用规程 |
(Code of practice for storage and on-site treatment of solid waste from buildings) |
| BS 5908-1990 |
化学及化学工业防火实用规程 |
(Code of practice for fire precautions in the chemical and allied industries) |
| BS 5909-1980 |
无氧铜的硬壳密着力试验方法 |
(Method for scale adhesion test for oxygen-free copper) |
| BS 5911-1-2002 |
预制混凝土管、管配件和辅助制品.具有软接头的非加筋、加筋混凝土管(包括套管)和管配件规范 |
(Precast concrete pipes, fittings and ancillary products - Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS) |
| BS 5911-103-1994 |
预制混凝土管和混凝土附件产品.带柔性接头的预应非压力管和配件的规范 |
(Precast concrete pipes, fittings and ancillary products - Specification for prestressed non-pressure pipes and fittings with flexible joints) |
| BS 5911-110-1992 |
下水道和污水工程用预制混凝土管道和配件.S型管道和配件(包括多孔管)规范 |
(Precast concrete pipes, fittings and ancillary products - Specification for ogee pipes and fittings (including perforated)) |
| BS 5911-114-1992 |
下水道和污水工程用预制混凝土管道和配件.第114部分:多孔管道规范 |
(Precast concrete pipes, fittings and ancillary products - Specification for porous pipes) |
| BS 5911-230-1994 |
预制混凝土管道、配件及辅助混凝土产品.第230部分:道路集水沟及集水沟封盖物厚板材的规范 |
(Precast concrete pipes, fittings and ancillary products - Specification for road gullies and gully cover slabs) |
| BS 5911-3-2002 |
预制混凝土管、管配件和辅助制品.未加筋和加筋混凝土人孔及渗水坑规范 |
(Precast concrete pipes, fittings and ancillary products - Specification for unreinforced and reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002)) |
| BS 5911-4-2002 |
预制混凝土管、管配件和辅助制品.未加筋和加筋混凝土观察孔规范 |
(Precast concrete pipes, fittings and ancillary products - Specification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002)) |
| BS 5911-5-2004 |
预制混凝土管、配件和辅助制品.带软接头的预应力非压力管道和配件的规范 |
|
| BS 5911-6-2004 |
预制混凝土管、配件和辅助制品.道路集水沟和集水沟封盖厚板材的规范 |
|
| BS 5911-6-2004 |
混凝土管和辅助混凝土制品.道路集水沟和集水沟封盖厚板材的规范 |
|
| BS 5912-1980 |
直柄钻头及机铰刀用转动榫及套筒的尺寸规范 |
(Specification for dimensions of driving tenons and sockets for parallel shank drills and machine reamers) |
| BS 5915-1980 |
矿井口容器中放射性矿石检定和分选规范 |
(Specification for equipment for minehead assay and sorting radioactive ores in containers) |
| BS 5918-1989 |
家用热水太阳能加热系统的实用规程 |
(Code of practice for solar heating systems for domestic hot water) |
| BS 5920-1980 |
铺地织物试样尺寸的测定方法 |
(Method for determination of dimensions of textile floor covering test specimens) |
| BS 5922-1980 |
实验室用玻璃冷凝器规范 |
(Specification for glass condensers for laboratory use) |
| BS 5923-2-1980 |
橡胶的化学分析方法.第2部分:橡胶制品锌含量测定用EDTA滴定法 |
(Methods for chemical analysis of rubber - EDTA titrimetric method for determination of zinc content of rubber products) |
| BS 5924-1989 |
电阻焊及其类似加工设备的结构和装置的安全要求规范 |
(Specification for safety requirements for the construction and the installation of equipment for resistance welding and allied processes) |
| BS 5925-1991 |
自然通风的通风原理和设计实施规程 |
(Code of practice for ventilation principles and designing for natural ventilation) |
| BS 5927-1980 |
石棉水泥管道敷设指南 |
(Guide for laying of asbestos-cement pipelines) |
| BS 5929-1-1986 |
食品感官分析方法.第1部分:方法论通用指南 |
(Methods for sensory analysis of food - General guide to methodology) |
| BS 5929-10-1999 |
食品的感官分析法.食品颜色评估的一般指南和试验方法 |
(Methods for sensory analysis of food - General guidance and test method for assessment of the colour of foods) |
| BS 5929-2-1982 |
食品感官分析方法.第2部分:配对对照试验 |
(Methods for sensory analysis of food - Paired comparison test) |
| BS 5929-3-1984 |
食品感官分析方法.第3部分:三角形试验 |
(Methods for sensory analysis of food - Triangular test) |
| BS 5929-4-1986 |
食品感官分析方法.第4部分:香味型法 |
(Methods for sensory analysis of food - Flavour profile methods) |
| BS 5929-5-1988 |
食品感官分析方法.第5部分:“Ａ”和“非Ａ”试验 |
(Methods for sensory analysis of food - ’A’-’not A’ test) |
| BS 5929-6-1989 |
食品的感官分析法.第6部分:等级法 |
(Methods for sensory analysis of food - Ranking) |
| BS 5929-7-1992 |
食品感官分析方法.第7部分:味觉灵敏度的测定 |
(Methods for sensory analysis of food - Investigating sensitivity of taste) |
| BS 5929-8-1992 |
食品感官分析方法.双三试验法 |
(Methods for sensory analysis of food - Duo-trio test) |
| BS 5929-9-1992 |
食品的感官分析法.第9部分:对鉴定人员进行气味检测和辨别的培训和传授 |
(Methods for sensory analysis of food - Initiation and training of assessors in the detection and recognition of odours) |
| BS 593-1990 |
实验室温度计规范 |
(Specification for laboratory thermometers) |
| BS 5930-1999 |
厂址调查实施规范 |
(Code of practice for site investigations) |
| BS 5931-1980 |
铺砌区用的现场边缘部分机械铺设实用规程 |
(Code of practice for machine laid in situ edge details for paved areas) |
| BS 5934-1980 |
连续机械装卸设备空载时带式输送机的操纵动力和拉力的计算方法 |
(Method for calculation of operating power and tensile forces in belt conveyors with carrying idlers on continuous mechanical handling equipment) |
| BS 5935-1980 |
软磁性材料制环形带绕铁芯规范 |
(Specification for toroidal strip-wound cores made of magnetically soft material) |
| BS 5938-1-1984 |
电信用感应器及变压器铁芯.第1部分:测量方法 |
(Cores for inductors and transformers for telecommunications - Methods of measurement) |
| BS 5938-2-1980 |
电信用感应器及变压器铁芯.第2部分:性能规范制订指南 |
(Cores for inductors and transformers for telecommunications - Guide to the drafting of performance specifications) |
| BS 5939-1995 |
谷物及谷物制品的术语词汇 |
(Glossary of terms for cereals and cereal products) |
| BS 594 Pt.2-1992 |
道路和其他铺砌区用热压地沥青.第2部分:碾压地沥青的运输、敷设和压实规范 |
(Hot rolled asphalt for roads and other paved areas. Specification for the transport, laying and compaction of rolled asphalt) |
| BS 594-1-2003 |
道路和其他铺砌区用热压制沥青.组分材料与地沥青混合物规范 |
(Hot rolled asphalt for roads and other paved areas - Specification for constituent materials and asphalt mixtures) |
| BS 594-2-2003 |
道路和其他铺砌区用热压制沥青.热压制沥青的运输、铺设和压实规范 |
(Hot rolled asphalt for roads and other paved areas - Specification for transport, laying and compaction of hot rolled asphalt) |
| BS 5941-1980 |
1英寸标准电容式传声器在自由场和压力灵敏度之间的差值规范 |
(Specification for values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones) |
| BS 5942-1-1980 |
高保真度音频设备及系统.最低性能要求.第1部分:一般要求规范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for general requirements) |
| BS 5942-11-1989 |
高保真度音响设备及系统.最低性能要求.车辆(例如汽车)用高保真度系统的规范.一般要求 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for high fidelity systems for use in vehicles (for example, motor cars); general requirements) |
| BS 5942-12-1989 |
高保真度音响设备及系统.最低性能要求.第12部分:电视调谐器音频输出规范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for the sound output of television tuners) |
| BS 5942-13-1989 |
高保真度音响设备及系统.最低性能要求.车辆(如:汽车)用高保真系统规范.调频无线电调谐装置 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for high fidelity systems for use in vehicles (for example, motor cars); FM radio tuner units) |
| BS 5942-2-1987 |
高保真度音频设备及系统.最低性能要求.第2部分:调频无线电调谐器规范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for FM radio tuners) |
| BS 5942-3-1980 |
高保真度音频设备及系统.最低性能要求.第3部分:电唱设备和盒式磁带规范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for record playing equipment and cartridges) |
| BS 5942-4-1980 |
高保真度音频设备及系统.最低性能要求.第4部分:磁性录音和放音设备规范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for magnetic recording and reproducing equipment) |
| BS 5942-5-1983 |
高保真度音频设备及系统.最低性能要求.第5部分:传声器规范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for microphones) |
| BS 5942-7-1987 |
高保真度音频设备及系统.最低性能要求 第7部分:扬声器规范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for loudspeakers) |
| BS 5942-8-1987 |
高保真度音频设备及系统.最低性能要求.第8部分:组合设备规范 |
(High fidelity audio equipment and systems; minimum performance requirements - Specification for combination equipment) |
| BS 5943-1980 |
矫形鞋靴的测量及记录方法 |
(Methods for measurement and recording for orthopaedic footwear) |
| BS 5944-1-1992 |
液压动力系统和部件所产生的空气噪声的测量.第1部分:泵的试验方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps) |
| BS 5944-2-1992 |
液压动力系统和部件所产生的空气噪声的测量.第2部分:电动机的试验方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for motors) |
| BS 5944-4-1984 |
液压动力系统和部件所产生的空气噪音的测量.第4部分:流量和压力控制阀声功率级的测定方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure) |
| BS 5944-5-1985 |
液压动力系统和部件所产生的空气噪音的测量.第5部分:使用消声室测定泵的声功率级的简易方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber) |
| BS 5944-6-1992 |
液压动力系统和部件所产生的空气噪音的测量.第6部分:利用平行六面体传声器陈列的泵的试验方法 |
(Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps using a parallelepiped microphone array) |
| BS 5946-1980 |
测定苯酚-甲醛泡沫塑料燃烧特性的试验方法 |
(Method of test for determination of the punking behaviour of phenol-formaldehyde foam) |
| BS 5947-1992 |
包括验收条件的农用轮式拖拉机保护座舱及机架的静负荷试验方法 |
(Method of test for static loading of protective cabs and frames for agricultural wheeled tractors, including acceptance conditions) |
| BS 5950-1-2001 |
建筑中使用的钢制结构.设计的实施规范.轧制和焊接型材 |
(Structural use of steelwork in building - Code of practice for design - Rolled and welded sections) |
| BS 5950-2-2001 |
建筑物中使用的钢制件.材料、制造和装配规范.轧制及焊接型材 |
(Structural use of steelwork in building - Specification for materials, fabrication and erection - Rolled and welded sections) |
| BS 5950-3.1-1990 |
建筑中使用的钢制结构.第3部分:复合结构的设计.第1节:单一或连续复合梁设计的实用规程 |
(Structural use of steelwork in building - Design in composite construction - Code of practice for design of simple and continuous composite beams) |
| BS 5950-4-1994 |
建筑中使用的钢制结构.用成型钢制作复合厚板材的设计实用规程 |
(Structural use of steelwork in building - Code of practice for design of composite slabs with profiled steel sheeting) |
| BS 5950-5-1998 |
建筑物构架结构应用.冷变形薄量规部分设计规程. |
(Structural use of steelwork in building - Code of practice for design of cold formed thin gauge sections) |
| BS 5950-6-1995 |
建筑物中使用的结构钢制件.第6部分:薄壁钢板设计实施规程 |
(Structural use of steelwork in building - Code of practice for design of light gauge profiled steel sheeting) |
| BS 5950-7-1992 |
建筑物中使用的钢制件.第7部分:材料和工艺规范:冷加工型材 |
(Structural use of steelwork in building - Specification for materials and workmanship: cold formed sections) |
| BS 5950-8-2003 |
建筑中使用的钢制结构.耐火性设计实施规程 |
(Structural use of steelwork in building - Code of practice for fire resistant design) |
| BS 5950-9-1994 |
建筑用钢制件.应力外壳设计实施法规 |
(Structural use of steelwork in building - Code of practice for stressed skin design) |
| BS 5952-1980 |
电子设备用的白云母件规范 |
(Specification for muscovite mica components for electronic equipment) |
| BS 5954-2-1985 |
482.6mm(19in)系列的机械结构尺寸.第2部分:框架结构的机壳和高跨比规范 |
(Dimensions of mechanical structures of the 482.6 mm (19 in) series - Specification for cabinets and pitches of rack structures) |
| BS 5954-3-1985 |
482.6mm(19in)系列的机械结构尺寸.第3部分:小框架与其插件规范 |
(Dimensions of mechanical structures of the 482.6 mm (19 in) series - Specification for subracks and associated plug-in units) |
| BS 5955-6-1980 |
塑料管道工程(热塑性塑料).第6部分:自重排水和下水道用未增塑聚氯乙烯管道工程安装实用规程 |
(Plastics pipework (thermoplastics materials) - Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers) |
| BS 5955-8-2001 |
塑料管道工程(热塑性塑料).家用冷、热水设施和建筑物中加热系统用的热塑性塑料管道工程及其配件的安装规范 |
(Plastics pipework (thermoplastics materials) - Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildi) |
| BS 5958-1-1992 |
有害静电控制用实用规程.总设想 |
(Code of practice for control of undesirable static electricity - General considerations) |
| BS 5958-2-1992 |
控制静电干扰实用规程.特殊工业环境用推荐规程 |
(Code of practice for control of undesirable static electricity - Recommendations for particular industrial situations) |
| BS 5960-1980 |
复印机技术规格页最低限度信息规范 |
(Specification for minimum information to be included in specification sheets of duplicators) |
| BS 5961-1980 |
电绝缘用塑料薄膜及薄片摩擦系数的测定方法 |
(Method for determination of coefficients of friction of plastic film and sheeting for use as electrical insulation) |
| BS 5962-1980 |
萘规范(包括试验方法) |
(Specifications for naphthalene (including test methods)) |
| BS 5964-1-1990 |
建筑放样和测量.第1部分:测量、计划和组织方法与验收准则 |
(Building setting out and measurement - Methods of measuring, planning and organization and acceptance criteria) |
| BS 5964-2-1996 |
房屋的测量方法.定线和测量.第2部分:测量点和测量目标 |
(Building setting out and measurement - Measuring stations and targets) |
| BS 5964-3-1996 |
房屋的放样和测量方法.第3部分:调查及测量设备采购用清单 |
(Building setting out and measurement - Check-lists for the procurement of surveys and measurement services) |
| BS 5965-1980 |
手动平衡式载人住宅电梯规范 |
(Specification for manually driven balanced personal homelifts) |
| BS 5970-2001 |
温度范围从-100℃至+870℃的管道工程及设备隔热的实施规程 |
(Code of practice for thermal insulation of pipework and equipment in the temperature range of -100 鳦 to +870 鳦) |
| BS 5972-1980 |
道路照明用光电控制装置规范 |
(Specification for photoelectric control units for road lighting) |
| BS 5973-1993 |
钢制通道和工作脚手架和专用脚手架结构实用规程 |
(Code of practice for access and working scaffolds and special scaffold structures in steel) |
| BS 5974-1990 |
临时安装的悬挂的脚手架和入口设备实用规程 |
(Code of practice for temporarily installed suspended scaffolds and access equipment) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com