标准号 |
中文名称 |
英文名称 |
| BS EN 4187-2001 |
航空航天系列.钛合金管连接件8°30’.90°弯头长闷头 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Elbows 90° bulkhead, long) |
| BS EN 4188-2001 |
航空航天系列.钛合金管连接件8°30’.90°弯头长闷头焊接端头 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Elbows 90°bulkhead, long, welded end) |
| BS EN 4189-2001 |
航空航天系列.钛合金8°30’管连接件.带有长闷头套管的三通管 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Tees, bulkhead branch long) |
| BS EN 419-1-2000 |
非家用燃气高架发光辐射加热器.安全 |
(Non-domestic gas-fired overhead luminous radiant heaters - Safety) |
| BS EN 4190-2001 |
航空航天系列.钛合金管连接件8°30’.在使用的带止推金属丝的缩径三通管 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Tees, reduced with thrust wire nut on run) |
| BS EN 4191-2001 |
航空航天系列.钛合金管连接件8°30’.缩径三通管长闷头分支 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Tees, reduced, bulkhead branch, long) |
| BS EN 4192-2001 |
航空航天系列.钛合金8°30’管连接件.带有缩短闷头套管的三通管 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Tees, reduced bulkhead branch) |
| BS EN 4193-2001 |
航空航天系列.钛合金8°30’管连接件.带有异径延长闷头的三通管 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Tees, reduced bulkhead on run long) |
| BS EN 4194-2001 |
航空航天系列.钛合金8°30’管连接件.带有异径闷头三通管 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Tees, reduced, bulkhead) |
| BS EN 420-2003 |
防护手套.一般要求和试验方法 |
(Protective gloves - General requirements and test methods) |
| BS EN 421-1994 |
预防电离辐射和放射性污染的防护手套 |
(Protective gloves against ionizing radiation and radioactive contamination) |
| BS EN 4211-2005 |
航空航天系列.铝合金AL-P2024-T42.覆层板材.6 mm≤a≤25 mm |
|
| BS EN 4212-2005 |
航空航天系列.铝合金AL-P5086-H111.板材.6 mm≤a≤80 mm |
|
| BS EN 4213-2005 |
航空航天系列.铝合金AL-P6061-T651.板材.6 mm≤a≤80 mm |
|
| BS EN 4214-2005 |
航空航天系列.铝合金AL-P7010-T651.板材.6 mm≤a≤20 mm |
|
| BS EN 4215-2005 |
航空航天系列.铝合金AL-P7175-T651.板材.6 mm≤a≤80 mm |
|
| BS EN 422-1996 |
橡胶和塑料.机械.安全.生产塑料空心制品的吹模机械.设计制造的技术要求 |
(Rubber and plastics - Machines - Safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction) |
| BS EN 423-2002 |
弹性地板覆盖物.耐污斑性的测定 |
(Resilient floor coverings - Determination of resistance to staining) |
| BS EN 4233-2001 |
航空航天系列.钛合金管连接件8°30’.带螺纹的焊接活接头 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, welded, threaded) |
| BS EN 424-2002 |
弹性地板覆盖物.家具腿模拟移动效果的测定 |
(Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg) |
| BS EN 4247-2005 |
航空航天系列.铝合金AL-P2024-T42.板材.6 mm≤a≤140 mm |
|
| BS EN 425-2002 |
弹性地板和叠层地板覆盖物.椅子脚轮效应试验 |
(Resilient and laminate floor coverings - Castor chair test) |
| BS EN 4250-2001 |
航空航天系列.镍基合金NI-B41001(NiCr19Si7B).硬钎焊填充金属 |
(Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil) |
| BS EN 4258-1998 |
金属材料.标准化的一般组织.欧洲标准的类型和其使用之间的链接 |
(Metallic materials - General organization of standardization - Links between types of EN standards and their use) |
| BS EN 426-1993 |
弹性地板覆盖物.片材宽度、长度和平面度的测定 |
(Resilient floor coverings - Determination of width, length, straightness and flatness of sheet material) |
| BS EN 4267-2001 |
航空航天系列.钛和钛合金制成的圆形棒.直径6mm 160mm.尺寸 |
(Aerospace series - Round bar in titanium and titanium alloys - Diameter 6 mm) |
| BS EN 427-1994 |
弹性地板覆盖物.地面砖边长、垂度和直度的测定 |
(Resilient floor coverings - Determination of the side length, squareness and straightness of tiles) |
| BS EN 428-1993 |
弹性地板覆盖物.总厚度测定 |
(Resilient floor coverings - Determination of overall thickness) |
| BS EN 4286-2005 |
航空航天系列.铝合金AL-P8090-T89.模锻件.a≤125 mm |
|
| BS EN 429-1993 |
弹性地板覆盖物.叠层厚度测定 |
(Resilient floor coverings - Determination of the thickness of layers) |
| BS EN 4291-2005 |
航空航天系列.铝合金AL-P8090.锻造坯料 |
|
| BS EN 4292-2005 |
航空航天系列.铝合金AL-R39002.锻造坯料 |
|
| BS EN 430-1994 |
弹性地板覆盖物.单位面积重量的测定 |
(Resilient floor coverings - Determination of mass per unit area) |
| BS EN 431-1994 |
弹性地板覆盖物.耐剥离性的测定 |
(Resilient floor coverings - Determination of peel resistance) |
| BS EN 4313-2005 |
航空航天系列.铝合金AL-P6013-T6.薄板和带材.0.5 mm≤a≤6 mm |
|
| BS EN 432-1994 |
弹性地板覆盖物.剪切力测定 |
(Resilient floor coverings - Determination of shear force) |
| BS EN 4321-2003 |
航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金 718)的细螺栓体的、长螺纹的、带安全锁线孔、镀银的十二角 |
(Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at) |
| BS EN 4322-2003 |
航空航天系列.细杆、长螺纹、带安全锁线孔的双六角头、阳极氧化镀MoS2的钛合金TI-P64001螺栓.强度等级:1100 |
(Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoSDOWN2 coated - Strength class: 1100 MPa (at ambient temperatur) |
| BS EN 4323-2003 |
航空航天系列.六瓣凹槽、头部加螺纹的阳极氧化镀MoS2、钛合金TI-P64001制100 沉头螺钉.等级:900MPa(室温)/ |
(Aerospace series - Screws, 100 ?countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoSDOWN2 coated - Classification: 900 MPa (at ambient temperature)/350 鳦) |
| BS EN 4324-2002 |
航空航天系列.铝合金AL-W42201.焊接用填充金属.焊条 |
(Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod) |
| BS EN 4325-2001 |
航空航天系列.耐热合金NI-WH1302(NiCr20Co13Mo4Ti3Ai).焊接填充金属.线或棒 |
(Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) - Filler metal for welding - Wire and rod) |
| BS EN 4326-2001 |
航空航天系列.耐热合金CO-WH4102(CoCr28W20Ni5V1).硬钎焊用填充金属.金属丝和焊条 |
(Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod) |
| BS EN 4327-2001 |
航空航天系列.耐热合金CO-WH1401(CoCr26Ni11W8).硬钎焊用填充金属.金属丝和焊条 |
(Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod) |
| BS EN 4328-2002 |
航空航天系列.钢FE-WM1601 (X18CrWNi13-3-2).焊接用填充金属.焊丝和焊条 |
(Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod) |
| BS EN 4329-2001 |
航空航天系列.耐热合金NI-WH0001(NiCr20).焊接填充金属.线和棒 |
(Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod) |
| BS EN 433-1994 |
弹性地板覆盖物.静荷载后残留压痕的测定 |
(Resilient floor coverings - Determination of residual indentation after static loading) |
| BS EN 4330-2002 |
航空航天系列.钢FE-WA4802(X8CrNiMn27-22-2).焊接用填充金属.焊丝和焊条 |
(Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod) |
| BS EN 4331-2002 |
航空航天系列.钢FE-WL1804 (25CrMnMo4-2-2).焊接用填充金属.焊丝和焊条 |
(Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod) |
| BS EN 4332-2002 |
航空航天系列.钢FE-WL1805 (8CrMnMo12-4-9). 焊接用填充金属.焊丝和焊条 |
(Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod) |
| BS EN 4333-2002 |
航空航天系列.钢FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2). 焊接用填充金属.焊丝和焊条 |
(Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod) |
| BS EN 4334-2002 |
航空航天系列.钢FE-WL1806 (15CrMnMoV5-4-9-3). 焊接用填充金属.焊丝和焊条 |
(Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod) |
| BS EN 4335-2002 |
航空航天系列.钢FE-WA2602 (X4NiCrTiMoV26-15). 焊接用填充金属.焊丝和焊条 |
(Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod) |
| BS EN 4336-2002 |
航空航天系列.钢FE-WA3801 (X4CrNiMn20-10-2). 焊接用填充金属.焊丝和焊条 |
(Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod) |
| BS EN 4337-2001 |
航空航天系列.耐热合金NI-WH8901(NiCr16Ti3Mn2).硬钎焊用填充金属.金属丝和焊条 |
(Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding - Wire and rod) |
| BS EN 4338-2001 |
航空航天系列.耐热合金NI-WH3902(NiCr25Mo10C).硬钎焊用填充金属.金属丝和焊条 |
(Aerospace series - Heat resisting alloy - NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod) |
| BS EN 4339-2001 |
航空航天系列.耐热合金CO-WH4001(CoCr29W9).硬钎焊用填充金属.金属丝和焊条 |
(Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod) |
| BS EN 434-1994 |
弹性地板覆层.尺寸稳定性和受热卷曲的测定 |
(Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat) |
| BS EN 4340-2002 |
航空航天系列.镁合金钢MG-W68001. 焊接用填充金属.焊丝和焊条 |
(Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod) |
| BS EN 4341-2001 |
航空航天系列.铝合金AL-W46431.焊接填充金属.线和棒 |
(Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod) |
| BS EN 4342-2001 |
航空航天系列.钛Ti-W99001.焊接填充金属.线和棒 |
(Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod) |
| BS EN 4343-2002 |
航空航天系列.钢FE-WM1001 (X13Cr12). 焊接用填充金属.焊丝和焊条 |
(Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod) |
| BS EN 4344-2001 |
航空航天系列.钢FE-WM1002(X13Cr13).硬钎焊用填充金属.金属丝和焊条 |
(Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod) |
| BS EN 435-1994 |
弹性地板覆盖物.挠性测定 |
(Resilient floor coverings - Determination of flexibility) |
| BS EN 4352-2003 |
航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金 718)的细螺栓体的、长螺纹的、带安全锁线孔、镀MoS2 的十 |
(Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH 2601 (Inconel 718), MoS2 coated - Classification: 1550 MPa (at) |
| BS EN 436-1994 |
弹性地板覆层.单位体积质量的测定 |
(Resilient floor coverings - Determination of density) |
| BS EN 437-2003 |
试验气体.试验压力.器具分类 |
(Test gases - Test pressures - Appliance categories) |
| BS EN 438-1-1991 |
以热固树脂为基质的装饰用高压层压装饰板(HPL).规范 |
(Decorative high-pressure laminates (HPL) sheets based on thermosetting resins - Specifications) |
| BS EN 438-1-2005 |
装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).说明和一般信息 |
|
| BS EN 438-2-1991 |
以热固树脂为基质的装饰用高压层压装饰板(HPL).特性测定 |
(Decorative high-pressure laminates (HPL) sheets based on thermosetting resins - Determination of properties) |
| BS EN 438-2-2005 |
装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).性能测定 |
|
| BS EN 438-5-2005 |
装饰用高压层压板材(HPL).基于热固性树脂的薄板材(通常称为层压板材).用于粘结支撑基质的厚度不足2毫米的楼板级层压板材的分类和规范 |
|
| BS EN 438-6-2005 |
基于热固性树脂的装饰用高压层压(HPL)薄板材.大于和等于2mm厚的外部用压实层压板材的分类和规范 |
|
| BS EN 438-7-2005 |
装饰用高压层压板材(HPL).基于热固性树脂的薄板材(通常称为层压板材).内墙、外墙和天花板终饰用压实层压板材和HPL复合板材 |
|
| BS EN 439-1994 |
焊接消耗品.气体保护电弧焊和切割用气体 |
(Welding consumables - Shielding gases for arc welding and cutting) |
| BS EN 440-1995 |
焊接消耗品.非合金与细粒钢的气体保护金属电弧焊用丝状电极和沉积物.分类 |
(Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification) |
| BS EN 441-1-1995 |
冷动式陈列柜.术语和定义 |
(Refrigerated display cabinets - Terms and definitions) |
| BS EN 441-10-1995 |
冷动式陈列柜.有无气味的测试 |
(Refrigerated display cabinets - Test for absence of odour and taste) |
| BS EN 441-11-1995 |
冷动式陈列柜.装配、维修和用户指南 |
(Refrigerated display cabinets - Installation, maintenance and user’s guide) |
| BS EN 441-12-1997 |
装饰冰柜.第12部分:与冷凝器分开安装的冰柜的制冷量的测量 |
(Refrigerated display cabinets - Measurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet) |
| BS EN 441-2-1995 |
冷动式陈列柜.机械和物理的一般要求 |
(Refrigerated display cabinets - General mechanical and physical requirements) |
| BS EN 441-3-1995 |
冷动式陈列柜.线性尺寸、面积和容积 |
(Refrigerated display cabinets - Linear dimensions, areas and volumes) |
| BS EN 441-4-1995 |
冷动式陈列柜.一般性能试验条件 |
(Refrigerated display cabinets - General test conditions) |
| BS EN 441-5-1996 |
冷动式陈列柜.温度试验 |
(Refrigerated display cabinets - Temperature test) |
| BS EN 441-6-1995 |
冷动式陈列柜.根据温度进行分类 |
(Refrigerated display cabinets - Classification according to temperature) |
| BS EN 441-7-1995 |
冷动式陈列柜.除霜试验 |
(Refrigerated display cabinets - Defrosting test) |
| BS EN 441-8-1995 |
冷动式陈列柜.水蒸气冷凝试验 |
(Refrigerated display cabinets - Water vapour condensation test) |
| BS EN 441-9-1995 |
冷动式陈列柜.电能源消耗试验 |
(Refrigerated display cabinets - Electrical energy consumption test) |
| BS EN 442-1-1996 |
散热器和对流式暖房规范.第1部分:技术规范和要求 |
(Specification for radiators and convectors - Technical specifications and requirements) |
| BS EN 442-2-1997 |
散热器和对流式暖房器规范.试验方法和级别 |
(Specification for radiators and convectors - Test methods and rating) |
| BS EN 442-3-2003 |
散热器和对流器规范.合格评价 |
(Specification for radiators and convectors - Evaluation of conformity) |
| BS EN 4420-2003 |
航空航天系列.合金钢FE-PA3903制弹簧夹 |
(Aerospace series - Clips, spring tension, in alloy steel FE-PA3903) |
| BS EN 443-1997 |
消防人员用的头盔 |
(Helmets for firefighters) |
| BS EN 444-1994 |
无损检验.用X和γ射线进行金属材料射线检查的一般原则 |
(Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays) |
| BS EN 445-1997 |
预应力钢筋束用灌浆.试验方法 |
(Grout for prestressing tendons - Test methods) |
| BS EN 4450-2005 |
航空航天系列.铝合金AL-P7050-T762.薄板.0.8 mm≤a≤6 mm |
|
| BS EN 446-1997 |
预应力钢筋束灌浆.灌浆过程 |
(Grout for prestressing tendons - Grouting procedures) |
| BS EN 447-1997 |
预应力钢筋束灌浆.普通灌浆规范 |
(Grout for prestressing tendons - Specification for common grout) |
| BS EN 448-2003 |
区域供暖管道.直埋式热水供应网用预先绝热连接的管道系统.聚氨酯热绝缘和聚乙烯外覆层钢管用成套配件 |
(District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyet) |
| BS EN 449-2002 |
专用液化石油气装置规范.无排气口的居室暖器(包括扩散催化燃烧的加热器) |
(Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters)) |
| BS EN 450-1995 |
混凝土飞灰的定义、要求和质量管理 |
(Fly ash for concrete - Definitions, requirements and quality control) |
| BS EN 45003-1995 |
实验室认可系统的检定和测试.操作和认可总要求 |
(Calibration and testing laboratory accreditation systems - General requirements for operation and recognition) |
| BS EN 45004-1995 |
检验机构工作的通用准则 |
(General criteria for the operation of various types of bodies performing inspection) |
| BS EN 45010-1998 |
认证体系的评估和鉴定的一般要求 |
(General requirements for assessment and accreditation of certification systems) |
| BS EN 45011-1998 |
产品认证体系机构的一般要求 |
(General requirements for bodies operating product certification systems) |
| BS EN 45012-1998 |
质量体系的评估和认证/注册机构的一般要求 |
(General requirements for bodies operating assessment and certification/registration of quality systems) |
| BS EN 45014-1998 |
供货方货物合格申报的通用准则 |
(General criteria for supplier’s declaration of conformity) |
| BS EN 45020-1998 |
标准化及相关工作.通用词汇 |
(Standardization and related activities - General vocabulary) |
| BS EN 451-1-1995 |
飞灰的试验方法.测定游离氧化钙的含量 |
(Method of testing fly ash - Determination of free calcium oxide content) |
| BS EN 451-1-2004 |
飞灰的试验方法.测定游离氧化钙的含量 |
|
| BS EN 451-1-2004 |
飞灰的试验方法.测定游离氧化钙的含量 |
|
| BS EN 451-2-1995 |
飞灰的试验方法.用湿筛法测定细度 |
(Method of testing fly ash - Determination of fineness by wet sieving) |
| BS EN 452-1996 |
交换体.A级交换体.尺寸和一般要求 |
(Swap bodies - Swap bodies of Class A. Dimensions and general requirements) |
| BS EN 453-2000 |
食品加工机械.和面机.安全和卫生要求 |
(Food processing machinery - Dough mixers - Safety and hygiene requirements) |
| BS EN 454-2000 |
食品加工机械.转动和面机.安全和卫生要求 |
(Food processing machinery - Planetary mixers - Safety and hygiene requirements) |
| BS EN 4549-2003 |
航空航天系列.耐热钢或耐热镍合金管连接件.焊接连接端.设计构型.英制 |
(Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series) |
| BS EN 455-1-2000 |
医疗专用手套.防洞要求和试验 |
(Medical gloves for single use - Requirements and testing for freedom from holes) |
| BS EN 455-2-2000 |
医疗专用手套.物理性能要求和试验 |
(Medical gloves for single use - Requirements and testing for physical properties) |
| BS EN 455-3-2000 |
医疗专用手套.生物评价的要求和试验 |
(Medical gloves for single use - Requirements and testing for biological evaluation) |
| BS EN 4550-1-2003 |
航空航天系列.管连接件37度.设计构型.英制.凸形密封球端 |
(Aerospace series - Pipe coupling 37 ? Design configuration - Inch series - Male sealing ends, spherical) |
| BS EN 4550-2-2003 |
航空航天系列.管连接件37度.设计构型.英制.管端 |
(Aerospace series - Pipe coupling 37 ? Design configuration - Inch series - Port ends) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com