标准号 |
中文名称 |
英文名称 |
BS EN ISO 8320-1-2003 |
接触镜和接触镜保护产品.词汇.接触镜 |
(Contact lenses and contact lens care products - Vocabulary - Contact lenses) |
BS EN ISO 8320-2-2001 |
接触镜片和接触镜片保护产品.词汇.接触镜片保护产品 |
(Contact lenses and contact lens care products - Vocabulary - Contact lens care products) |
BS EN ISO 8321-1-2002 |
光学和光学仪器.接触镜.硬质角膜和巩膜接触镜 |
(Optics and optical instruments - Contact lenses - Rigid corneal and scleral contact lenses) |
BS EN ISO 8321-2-2000 |
光学和光学仪器.接触镜片.单焦水凝胶接触镜片 |
(Optics and optical instruments - Contact lenses - Single-vision hydrogel contact lenses) |
BS EN ISO 8325-2004 |
牙科.旋转器械试验方法 |
|
BS EN ISO 8330-2000 |
橡胶和塑料软管和软管配件.词汇 |
(Rubber and plastics hoses and hose assemblies - Vocabulary) |
BS EN ISO 8351-1-1995 |
包装.袋包装规格方法.纸袋 |
(Packaging - Method of specification for sacks - Paper sacks) |
BS EN ISO 8351-2-1995 |
包装.袋包装规格方法.热塑软薄膜制成的包装袋 |
(Packaging - Method of specification for sacks - Sacks made from thermoplastic flexible film) |
BS EN ISO 8359-1997 |
医疗电气设备.医用氧气浓缩器的安全要求 |
(Medical electrical equipment - Oxygen concentrators for medical use - Safety requirements) |
BS EN ISO 8362-1-2004 |
注射容器及附件.玻璃管制注射管 |
|
BS EN ISO 8362-3-2003 |
注射液容器及附件.注射小瓶用的铝盖 |
(Injection containers and accessories - Aluminium caps for injection vials) |
BS EN ISO 8362-4-2004 |
注射容器及附件.模制玻璃注射管 |
|
BS EN ISO 8367-1-1995 |
包装.一般用途包装袋的尺寸公差.纸袋 |
(Packaging - Dimensional tolerances for general purpose sacks - Paper sacks) |
BS EN ISO 8367-2-1995 |
包装.一般用途包装袋的尺寸公差.热塑性软薄膜制包装袋 |
(Packaging - Dimensional tolerances for general purpose sacks - Sacks made from thermoplastic flexible film) |
BS EN ISO 8373-1996 |
操作工业机器人的词汇 |
(Manipulating industrial robots - Vocabulary) |
BS EN ISO 8381-2000 |
以奶为基料的婴儿食品.脂肪含量的测定.重量分析法(参比法) |
(Milk based infant foods - Determination of fat content - Gravimetric method (Reference method)) |
BS EN ISO 8384-2001 |
船舶技术.挖泥船.词汇 |
(Ships and marine technology - Dredgers - Vocabulary) |
BS EN ISO 8385-1999 |
船舶和航海技术.挖泥船.分类 |
(Ships and marine technology - Dredgers - Classification) |
BS EN ISO 8388-1998 |
针织物.类型.词汇 |
(Knitted fabrics - Types - Vocabulary) |
BS EN ISO 8401-1988 |
金属镀层.延展性的测量方法述评 |
(Metallic coatings - Review of methods of measurement of ductility) |
BS EN ISO 8420-2002 |
动植物脂肪和油.极性化合物含量测定 |
(Animal and vegetable fats and oils - Determination of content of polar compounds) |
BS EN ISO 8429-1987 |
光学和光学仪器.眼科学.分度盘刻度 |
(Optics and optical instruments - Ophthalmology - Graduated dial scale) |
BS EN ISO 8434-1-1995 |
液压传动和一般用金属导管的连接.24度压合接头 |
(Metallic tube connections for fluid power and general use - 24 ?compression fittings) |
BS EN ISO 8442-1-1998 |
与食品有关的材料和物品.餐具和桌上凹型器皿.食品准备餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for cutlery for the preparation of food) |
BS EN ISO 8442-2-1998 |
与食品有关的材料和物品.餐具和桌上凹型器皿.不锈钢和镀银餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for stainless steel and silver-plated cutlery) |
BS EN ISO 8442-3-1998 |
与食品有关的材料和物品.餐具和桌上凹型器皿.镀银餐具和装饰凹盘的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for silver-plated table and decorative holloware) |
BS EN ISO 8442-4-1998 |
与食品有关的材料和物品.餐具和桌上凹型器皿.镀金餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for gold-plated cutlery) |
BS EN ISO 8442-5-2005 |
与食品接触的材料和制品.刀具和凹形餐具.刀具的锋利性和刃口保持的试验规范 |
|
BS EN ISO 8442-5-2005 |
与食品接触的材料和制品.刀具和凹形餐具.刀具的锋利性和刃口保持的试验规范 |
|
BS EN ISO 8442-6-2001 |
与食品接触的材料和物品.刀叉餐具和餐桌凹型餐具.薄镀银的由清漆保护的餐桌凹形餐具 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Lightly silver plated table holloware protected by laquer) |
BS EN ISO 8442-7-2001 |
与食品接触的材料和物品.刀叉餐具和餐桌凹型餐具.由银、其他贵金属及其合金制成的刀叉餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for table cutlery made of silver, other precious metals and their alloys) |
BS EN ISO 8442-8-2001 |
与食品接触的材料和物品.刀叉餐具和餐桌凹型餐具.银制餐具和装饰性凹形餐具的要求 |
(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for silver table and decorative holloware) |
BS EN ISO 845-1995 |
泡沫橡胶和塑料.表观密度的测定 |
(Cellular plastics and rubbers - Determination of apparent (bulk) density) |
BS EN ISO 846-1997 |
塑料.真菌或细菌作用下的性状测定.对用视力检查或质量变化的测定或物理性质的测定的评估 |
(Plastics - Evaluation of the action of microorganisms) |
BS EN ISO 8467-1995 |
水质.高锰酸盐指数的测定 |
(Water quality - Determination of permanganate index) |
BS EN ISO 8468-1995 |
船桥设计和相关设备.要求和指南 |
(Ship’s bridge layout and associated equipment - Requirements and guidelines) |
BS EN ISO 8469-1995 |
小型飞机.不耐火的燃料软管 |
(Small craft - Non-fire-resistant fuel hoses) |
BS EN ISO 8491-2004 |
金属材料.管材(全截面).弯曲试验 |
|
BS EN ISO 8492-2004 |
金属材料.管材.压扁试验 |
|
BS EN ISO 8493-2004 |
金属材料.管材.扩口试验 |
|
BS EN ISO 8493-2004 |
金属材料.管材.扩口试验 |
|
BS EN ISO 8494-2004 |
金属材料.管材.卷边试验 |
|
BS EN ISO 8495-2004 |
金属材料.管材.环形扩口试验 |
|
BS EN ISO 8496-2004 |
金属材料.管材.环形拉伸试验 |
|
BS EN ISO 8497-1997 |
热绝缘.测定圆管绝热的稳态热传输性能 |
(Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes) |
BS EN ISO 8501-1 Supplement-19 |
涂装油漆和有关产品前钢材预处理.表面清洁度的目视评定.不同磨料喷射清理所致钢材表观改变的典型样板照片 |
(Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Representative photographic examples of the change of appearance imparted) |
BS EN ISO 8501-1-1989 |
涂装油漆和有关产品前钢材预处理.表面清洁度的目视评定.未涂装的钢材和全面清除原有涂层后钢材的锈蚀等级和 |
() |
BS EN ISO 8501-2-1996 |
涂装油漆和有关产品前钢材预处理.表面清洁度的目视评定.局部去除原有涂层后钢材的除锈等级 |
(Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized) |
BS EN ISO 8502-5-2005 |
涂装油漆和有关产品前钢材的预处理.表面清洁度的评定试验.涂装前钢材表面上氯化物的测定(离子探测管法) |
|
BS EN ISO 8502-5-2005 |
涂装油漆和有关产品前钢材的预处理.表面清洁度的评定试验.涂装前钢材表面上氯化物的测定(离子探测管法) |
|
BS EN ISO 8503-1-1989 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第1部分:喷砂处理表面的 ISO评定比较样板 |
() |
BS EN ISO 8503-2-1989 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第2部分:喷砂处理表面的定级方法.比较方 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Method for the grading of surface profile of a) |
BS EN ISO 8503-3-1989 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理的钢衬底的表面粗糙度.ISO表面轮廓比较仪的校准方法和表面轮 |
() |
BS EN ISO 8503-4-1989 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第4部分:ISO表面轮廓比较仪的校准方法和 |
() |
BS EN ISO 8536-1-2003 |
医用输液器具.玻璃输液瓶 |
(Infusion equipment for medical use - Infusion glass bottles) |
BS EN ISO 8536-2-2002 |
医用输液器具.输液瓶塞 |
(Infusion equipment for medical use - Closures for infusion bottles) |
BS EN ISO 8536-3-1999 |
医用输液设备.输液瓶铝帽 |
(Infusion equipment for medical use - Aluminium caps for infusion bottles) |
BS EN ISO 8536-4-2004 |
医用输液器具.一次性使用重力输液式输液器 |
|
BS EN ISO 8536-8-2004 |
医用输液器具.与压力输液仪器一起使用的输液器具 |
|
BS EN ISO 8560-1999 |
建筑图纸.模数尺寸、直线和格栅的表示法 |
(Construction drawings - Representation of modular sizes, lines and grids) |
BS EN ISO 8561-1996 |
家用无霜制冷设备.制冷机、制冷机冷藏柜、冷冻食品储藏柜和用内压力空气循环冷却的食品冷藏柜特性和试验方 |
(Household refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by forced air circulation - Characteristics and test methods) |
BS EN ISO 8565-1995 |
金属及合金.大气腐蚀试验.现场试验的总要求 |
(Metals and alloys - Atmospheric corrosion testing - General requirements for field tests) |
BS EN ISO 8580-1989 |
橡胶和塑料软管.静态条件下的抗紫外线辐射测试 |
(Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions) |
BS EN ISO 8583-1995 |
有原始信息的金融交易卡.交换信息规范 |
(Financial transaction card originated messages. Interchange message specifications) |
BS EN ISO 8596-1996 |
视觉敏锐度测验.非临床用缺口环验光字体规范 |
(Visual acuity test types - Specification for Landolt ring optotype for non-clinical purposes) |
BS EN ISO 8597-1996 |
视觉灵敏度检验字体.非医院用有关验光字体法 |
(Visual acuity test types - Method for correlating optotypes used for non-clinical purposes) |
BS EN ISO 8598-1996 |
光学和光学仪器.焦距计 |
(Optics and optical instruments - Focimeters) |
BS EN ISO 8599-1997 |
光学和光学仪器.接触镜片.光谱和光透射率的测定 |
(Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance) |
BS EN ISO 8611-1-2004 |
物料运输用托盘.平托盘.试验方法 |
|
BS EN ISO 8612-2001 |
眼科仪器.眼压计 |
Ophthalmic instruments - Tonometers |
BS EN ISO 8618-1998 |
塑料.液态酚醛树脂.非挥发性物质的常规测定 |
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter |
BS EN ISO 8619-1998 |
塑料.酚醛树脂粉.在加热玻璃板上流动距离的测定 |
Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate |
BS EN ISO 8619-2005 |
塑料.酚醛树脂粉.在加热的玻璃板上流动距离的测定 |
|
BS EN ISO 862-1991 |
表面活性剂.词汇 |
(Glossary of terms for surface active agents) |
BS EN ISO 8620-1996 |
塑料.酚醛树脂粉.用空气喷射的筛滤器械的筛分析 |
Plastics - Phenolic resin powder - Sieve analysis using air-jet sieve apparatus |
BS EN ISO 8624-2002 |
眼科光学.眼镜架.测量系统和术语 |
(Ophthalmic optics - Spectacle frames - Measuring system and terminology) |
BS EN ISO 8655-1-2002 |
活塞运动的体积测量仪.术语、一般要求和使用推荐 |
(Piston-operated volumetric apparatus - Terminology, general requirements and user recommendations) |
BS EN ISO 8655-2-2002 |
活塞运动的体积测量仪.活塞吸管 |
Piston-operated volumetric apparatus - Piston pipettes |
BS EN ISO 8655-3-2002 |
活塞运动的体积测量仪.活塞滴定计 |
(Piston-operated volumetric apparatus - Piston burettes) |
BS EN ISO 8655-4-2002 |
活塞运动的体积测量仪.稀释计 |
(Piston-operated volumetric apparatus - Dilutors) |
BS EN ISO 8655-5-2002 |
活塞运动的体积测量仪.分配器 |
(Piston-operated volumetric apparatus - Dispensers) |
BS EN ISO 8655-6-2002 |
活塞运动的体积测量仪.测定测量误差用称重测量法 |
(Piston-operated volumetric apparatus - Gravimetric methods for the determination of measurement error) |
BS EN ISO 8662-10-1998 |
便携式手提动力工具.手柄振动测量.步冲轮廓机和剪切机械 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Nibblers and shears) |
BS EN ISO 8662-12-1997 |
便携式手提动力工具.手柄振动测量.第12部分:有往复作用的锯和锉和有摆动或旋转作用的锯 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Saws and files with reciprocating action and saws with rotating or oscillating action) |
BS EN ISO 8662-13-1997 |
便携式手提动力工具.手柄振动测量.第13部分:模具研模机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Die grinders |
BS EN ISO 8662-14-1997 |
便携式手提动力工具.手柄振动的测量.石工用工具和针式标定器 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Stone-working tools and needle scalers) |
BS EN ISO 8662-4-1995 |
便携式手提动力工具.手柄振动的测量.第4部分:磨床 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Grinding machines) |
BS EN ISO 8662-6-1995 |
便携式手提动力工具.手柄振动的测量.第6部分:冲击式钻机 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Impact drills) |
BS EN ISO 8662-7-1997 |
便携式手提动力工具.手柄振动测量.第7部分:扳手,旋具与具有冲击,冲力和刻踞齿作用的螺纹滚子 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action) |
BS EN ISO 8662-8-1997 |
便携式手提动力工具.手柄振动测量.第8部分:抛光和旋转,轨道和随机轨道砂轮机 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Polishers and rotary, orbital and random orbital sanders) |
BS EN ISO 8662-9-1997 |
便携式手提动力工具.手柄振动的测量.夯锤 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Rammers) |
BS EN ISO 8665-1996 |
小型船舶.海船推进发动机和装置.动力测量和说明 |
(Small craft - Marine propulsion engines and systems - Power measurements and declarations) |
BS EN ISO 8666-2002 |
小型舶船.主要数据 |
Small craft - Principal data |
BS EN ISO 8669-2-1997 |
尿收集袋.要求和试验方法 |
Urine collection bags - Requirements and test methods |
BS EN ISO 8670-2-1997 |
造口术收集袋.要求和试验方法 |
(Ostomy collection bags - Requirements and test methods) |
BS EN ISO 8673-2001 |
1型.六角头螺母.米制细牙螺纹.产品等级A和B |
(Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B) |
BS EN ISO 8674-2001 |
2型.六角头螺母.米制细牙螺纹.产品等级A和B |
(Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B) |
BS EN ISO 8675-2001 |
带米制细牙螺纹的六角头薄螺母.产品等级A和B |
(Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B) |
BS EN ISO 8676-2001 |
带米制细牙螺纹的六角头螺钉.产品等级A和B |
Hexagon head screws with metric fine pitch thread - Product grades A and B |
BS EN ISO 868-1992 |
塑料和硬橡胶.用硬度计对缺刻硬度的测定 |
Plastics and ebonite - Determination of indentation hardness by means of a a durometer (Shore hardness) |
BS EN ISO 868-2003 |
塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度) |
(Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)) |
BS EN ISO 8689-1-2000 |
水质.江河的生物分类.对海底微型无脊椎动物调查的生物质量数据的解释指南 |
Water quality - Biological classification of rivers - Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates |
BS EN ISO 8689-2-2000 |
水质.江河的生物分类.对海底微型无脊椎动物调查的生物质量数据的表示指南 |
(Water quality - Biological classification of rivers - Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates) |
BS EN ISO 8692-2004 |
水质.用单细胞绿海藻进行淡水藻类生长抑制性试验 |
|
BS EN ISO 8692-2004 |
水质.用单细胞绿海藻进行淡水藻类生长抑制性试验 |
|
BS EN ISO 8728-1999 |
船舶和航海技术.航海陀螺罗盘 |
(Ships and marine technology - Marine gyro-compasses) |
BS EN ISO 8729-1999 |
船舶和航海技术.海上雷达反射器 |
(Ships and marine technology - Marine radar reflectors) |
BS EN ISO 8733-1998 |
未淬硬钢或奥氏体不锈钢制有内螺纹的平行销 |
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel |
BS EN ISO 8734-1998 |
淬硬钢或马氏体不锈钢制平行销(定位销) |
(Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)) |
BS EN ISO 8735-1998 |
淬硬钢和马氏体不锈钢制带内螺纹的平行销 |
(Parallel pins with internal thread, of hardened steel or martensitic stainless steel) |
BS EN ISO 8739-1998 |
带槽销.带导向的全长直槽型销 |
(Grooved pins - Full-length parallel grooved, with pilot) |
BS EN ISO 8740-1998 |
带槽销.有倒角的全长直槽型销 |
(Grooved pins - Full-length parallel grooved, with chamfer) |
BS EN ISO 8741-1998 |
带槽销.半长倒锥槽型销 |
(Grooved pins - Half-length reverse-taper grooved) |
BS EN ISO 8742-1998 |
带槽销.中部三分之一长槽型销 |
(Grooved pins - One-third-length centre grooved) |
BS EN ISO 8743-1998 |
带槽销.中部半长槽型销 |
(Grooved pins - Half-length centre grooved) |
BS EN ISO 8744-1998 |
带槽销.全长锥槽型销 |
(Grooved pins - Full-length taper grooved) |
BS EN ISO 8745-1998 |
带槽销.半长锥槽型销 |
(Grooved pins - Half-length taper grooved) |
BS EN ISO 8746-1998 |
圆头带槽销 |
Grooved pins with round head |
BS EN ISO 8747-1998 |
沉头带槽销 |
Grooved pins with countersunk head |
BS EN ISO 8748-1998 |
弹簧型开口直销.重载盘绕式 |
Spring-type straight pins - Coiled, heavy duty |