标准号 |
中文名称 |
英文名称 |
| BS 4513-1969 |
辐射屏蔽用的铅砖规范 |
(Specification for lead bricks for radiation shielding) |
| BS 4514-2001 |
82.4mm最小平均外径的未增塑聚氯乙烯污水管和通风管以及82.4mm和其他尺寸的配件和附件.规范 |
(Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diameter, and fittings and accessories of 82.4 mm and of other sizes - Specification) |
| BS 4515-1-2000 |
陆地和近海钢管道焊接规范.碳及碳锰钢管 |
(Specification for welding of steel pipelines on land and offshore - Carbon and carbon manganese steel pipelines) |
| BS 4515-1-2004 |
陆地和近海钢管道焊接规范.碳及碳锰钢管 |
|
| BS 4515-2-1999 |
近海和陆地钢管焊接规范.双不锈钢管道 |
(Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines) |
| BS 4517-1969 |
正齿轮和斜齿轮传动电动机组件的尺寸规范(米制系列) |
(Specification for dimensions of spur and helical geared motor units (metric series)) |
| BS 4518-1982 |
环形密封圈(“O“形环)及其安装座的米制尺寸规格 |
(Specification for metric dimensions of toroidal sealing rings (’O’-rings) and their housings) |
| BS 4521-1.1-1971 |
专用铁路道岔规范.第1部分:英国铁路机车运行道岔.第1节:工字钢轨道岔 |
(Specification for railway turnouts for private users - Turnouts over which British Railways locomotives operate - Turnouts using bull head rails) |
| BS 4521-1.2-1971 |
专用铁路道岔规范.第1部分:英国铁路机车运行道岔.第2节:平底钢轨道岔 |
(Specification for railway turnouts for private users - Turnouts over which British Railways locomotives operate - Turnouts using flat bottom rail) |
| BS 4521-2-1975 |
专用铁路道岔规范.第2部分:英国铁路机车不运行的、轴负荷不超过10吨的轻型平底钢轨岔道 |
(Specification for railway turnouts for private users - Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails) |
| BS 4521-3.1-1974 |
专用铁路道岔规范.第3部分:英国铁路机车不运行的、轴负荷不超过25吨的中型道岔.第1节:工字钢轨道岔 |
(Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using bull head rai) |
| BS 4521-3.2-1975 |
专用铁路道岔规范.第3部分:英国铁路机车不运行的、轴负荷不超过25吨的中型道岔.第2节:平底钢轨道岔 |
(Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using flat bottom r) |
| BS 4521-4-1975 |
专用铁路道岔规范.第4部分:英国铁路机车不运行的、轴负荷可超过25吨的重型平底钢轨岔道 |
(Specification for railway turnouts for private users - Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails) |
| BS 4522-1988 |
工业用液态化工产品在20℃时绝对密度的测定方法 |
(Method for determination of absolute density at 20 鳦 of liquid chemical products for industrial use) |
| BS 4524-1983 |
水浴锅蒸发残余物的测定方法 |
(Method for determination of residue on evaporation on a water bath) |
| BS 4531-1986 |
轻便式和移动式槽形皮带输送机规范 |
(Specification for portable and mobile troughed belt conveyors) |
| BS 4532-1969 |
潜水呼吸管和面罩规范 |
(Specification for snorkels and face masks) |
| BS 4533-102.1-1990 |
灯具.特殊要求.一般用固定式灯具规范 |
(Luminaires - Particular requirements - Specification for fixed general purpose luminaires) |
| BS 4533-102.17-1990 |
灯具.第2部分:特殊要求.第17节:舞台照明、电视和电影摄影场(室内外)用灯具 |
(Luminaires - Particular requirements - Specification for luminaires for stage lighting, television, film and photographic studios (outside and indoor)) |
| BS 4533-102.19-1990 |
灯具.特殊要求.空气调节灯具(安全要求)规范 |
(Luminaires - Particular requirements - Specification for air-handling luminaires (safety requirements)) |
| BS 4533-102.9-1990 |
照明具.特殊要求.摄影照明用灯规范 |
(Luminaires - Particular requirements - Specification for photo and film luminaires (non-professional)) |
| BS 4536-1970 |
与钢丝绳配合使用的重型滑轮组规范 |
(Specification for heavy duty pulley blocks for use with wire rope) |
| BS 4540-1-1981 |
香料和调味品的取样.第1部分:取样方法 |
(Sampling of spices and condiments - Methods of sampling) |
| BS 4540-2-1982 |
香料和调味品的取样.第2部分:分析用研碎样品的制备方法 |
(Sampling of spices and condiments - Method for preparation of a ground sample for analysis) |
| BS 4542-1970 |
薄型电绝缘材料损耗角正切值和介电常数的测定方法(楞氏法) |
(Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method)) |
| BS 4543-2-1990 |
工厂预制隔绝烟囱.第2部分:固定式固体燃料装置用带不锈钢烟道内衬的烟囱规范 |
(Factory-made insulated chimneys - Specification for chimneys with stainless steel flue linings for use with solid fuel fixed appliances) |
| BS 4543-3-1990 |
工厂预制隔绝烟囱.第3部分:燃油装置用烟囱不锈钢内衬规范 |
(Factory-made insulated chimneys - Specification for chimneys with stainless steel fluelining for use with oil fired appliances) |
| BS 4548-1987 |
工业用同步皮带传动规范 |
(Specification for synchronous belt drives for industrial applications) |
| BS 4549-1-1997 |
增强塑料模塑件的质量控制要求指南.玻璃纤维增强聚酯树脂模塑件质量控制方案制定指南 |
(Guide to quality control requirements for reinforced plastics mouldings - Guide to the preparation of a scheme to control the quality of glass reinforced polyester mouldings) |
| BS 4550-0-1978 |
水泥的试验方法.第0部分:概述 |
(Methods of testing cement - General introduction) |
| BS 4550-3.1-1978 |
水泥的试验方法.物理试验.介绍 |
(Methods of testing cement - Physical tests - Introduction) |
| BS 4550-3.8-1978 |
水泥的试验方法.物理试验.水合作用热试验 |
(Methods of testing cement - Physical tests - Test for heat of hydration) |
| BS 4550-6-1978 |
水泥的试验方法.灰浆立方块体试用标准砂 |
(Methods of testing cement - Standard sand for mortar cubes) |
| BS 4551-2-1998 |
找平层、灰泥和灰浆的试验方法.化学分析和集料分级 |
(Methods of testing mortars, screeds and plasters - Chemical analysis and aggregate grading) |
| BS 4551-2005 |
灰浆.灰浆的试验方法.化学分析和物理试验 |
|
| BS 4552-1-1979 |
压燃式发动机的燃油滤油器粗滤器和沉淀器.第1部分:试验方法 |
(Fuel filters, strainers and sedimentors for compression-ignition engines - Methods of test) |
| BS 4553-1-1998 |
600/1000V单相分芯同轴电缆规范.带聚氯乙烯绝缘层的电缆 |
(Specification for 600/1000 V single-phase split concentric electric cables - Cables having PVC insulation) |
| BS 4553-2-1998 |
600/1000V单相分芯同轴电缆规范.带热固绝缘层的电缆 |
(Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation) |
| BS 4553-3-1998 |
600/1000V单相分芯同轴电缆规范.带热固绝缘层和受火影响时有低发散烟雾和腐蚀性气体的电缆 |
(Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire) |
| BS 4554-1970 |
纺织织物润湿度的试验方法 |
(Method of test for wettability of textile fabrics) |
| BS 4559-4-2000 |
校正用混合气体的制备方法.混合气体制备证书 |
(Methods for preparation of calibration gas mixtures - Certificate of mixture preparation) |
| BS 4559-5.1-1987 |
标定混合气体的制备方法.第5部分:动态容积法.第1节:校准方法的检查 |
(Methods for preparation of calibration gas mixtures - Dynamic volumetric methods - Review of methods of calibration) |
| BS 4559-5.4-1987 |
标定混合气体的制备方法.第5部分:动态容积法.第4节:连续注入法 |
(Methods for preparation of calibration gas mixtures - Dynamic volumetric methods - Continuous injection method) |
| BS 4559-6-1981 |
标定混合气体的制备方法.第6部分:饱和法 |
(Methods for preparation of calibration gas mixtures - Saturation method) |
| BS 4559-9.2-1988 |
标定混合气体的制备方法.比较法和溯源能力的确定方法.比较检验方法 |
(Methods for preparation of calibration gas mixtures - Comparison methods and methods for establishing traceability - Checking by a comparison method) |
| BS 456-1961 |
跟踪电路绝缘的尺寸规范 |
(Specification for dimensions of track circuit insulation) |
| BS 4560-1990 |
制服衣衬用织物规范 |
(Specification for fabrics for linings in uniform clothing) |
| BS 4566-1970 |
有孔展览板展示商品用包装展示孔规范 |
(Specification for slots for packages for pegboard display) |
| BS 4568-1-1970 |
电气装置用ISO型米制螺纹钢导管及配件规范.第1部分:钢导管、弯头和接头 |
(Specification for steel conduit and fittings with metric threads of ISO form for electrical installations - Steel conduit, bends and couplers) |
| BS 4569-1983 |
起绒织物及表面植绒织物可燃性(表面闪光)试验方法 |
(Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface) |
| BS 4570-1985 |
钢铸件的熔焊技术规范 |
(Specification for fusion welding of steel castings) |
| BS 4573-1970 |
二销可换向的插头和剃须刀输出插座规范 |
(Specification for 2-pin reversible plugs and shaver socket-outlets) |
| BS 4574-1970 |
用 K和N 墨水测定纸和纸板的吸墨性推荐标准 |
(Recommendation for the determination of the ink absorbency of paper and board by use of K & N ink) |
| BS 4575-3-1988 |
液力传动和控制系统.第3部分:液压和气液动力系统的技术规范、设计、结构、交付使用和安全应用实用规程 |
(Fluid power transmission and control systems - Code of practice for the technical specification, design, construction, commissioning and safe application of hydraulic and pneumatic fluid power systems) |
| BS 4577-1970 |
电阻焊电极和辅助设备用材料规范 |
(Specification for materials for resistance welding electrodes and ancillary equipment) |
| BS 4578-1970 |
幼儿用枕头的硬度和透气性试验方法规范 |
(Specification for methods of test for hardness of, and for air flow through, infants’ pillows) |
| BS 4579-2-1973 |
电缆和电线连接器中机械和压合接头性能规范.第2部分:镍、铁及镀铜导线的压合接头 |
(Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors) |
| BS 4581-2-1984 |
磨床上安装砂轮用法兰.76.2mm以下孔径砂轮用法兰的尺寸和材料规范 |
(Flanges for mounting grinding wheels on grinding machine tools - Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore) |
| BS 4582-1-1970 |
小齿距齿轮(米制模数)规范.第1部分:渐开线直齿轮和斜齿轮 |
(Specification for fine pitch gears (metric module) - Involute spur and helical gears) |
| BS 4582-2-1978 |
小齿距齿轮(米制模数)规范.齿轮滚铣刀与刀具 |
(Specification for fine pitch gears (metric module) - Hobs and cutters) |
| BS 4583-1991 |
工业用高级乙醇的试验方法 |
(Methods of test for higher alcohols for industrial use) |
| BS 4584-103.1-1990 |
印制电路板用覆箔板.第103部分:印制电路连接专用材料.第1节:多层印制电路板制造中用作粘结片材的半固化片规 |
(Metal-clad base materials for printed wiring boards - Special materials used in connection with printed circuits - Specification for prepreg for use as a bonding sheet material in the fabrication of m) |
| BS 4584-103.2-1990 |
印制电路板用覆箔板.第103部分:印刷电路连接专用材料.第2节:覆铜板制造用铜箔规范 |
(Metal-clad base materials for printed wiring boards - Special materials used in connection with printed circuits - Specification for copper foil for use in the manufacture of copper-clad base material) |
| BS 4584-103.3-1992 |
印制电路用基材.第3部分:印制电路连接用特殊材料.第3号规范:制造印制电路板中用的永久性聚合物表面覆盖剂( |
(Metal-clad base materials for printed wiring boards - Special materials used in connection with printed circuits - Specification for permanent polymer coating materials (solder resist) for use in the) |
| BS 4584-13-1977 |
印制电路板用覆箔板.第13部分:硅酮玻璃布覆铜层压板SI-GC-Cu-13 |
(Specification for metal-clad base materials for printed circuits - Silicone woven glass fabric copper-clad laminated sheet Si-GC-Cu-13) |
| BS 4584-15-1978 |
印制电路板用覆箔板.胶粘剂涂覆聚合膜片:PETP-F-15和PL-F-15 |
(Metal-clad base materials for printed wiring boards - Adhesive coated polymeric films: PETP-F-15 and PI-F-15) |
| BS 4584-5-1972 |
印制电路板用覆箔.第5部分:中等电气质量的酚醛纤维素纸覆铜层压板:PF-CP-Cu-5 |
(Specification for metal-clad base materials for printed circuits - Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality: PF-CP-Cu-5) |
| BS 4584-6-1972 |
印制电路板用覆箔板.第6部分:中等电气质量的阻燃级酚醛纤维素纸覆铜层压板:PF-CP-Cu-6 |
(Specification for metal-clad base materials for printed circuits - Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality, flame retardant grade: PF-CP-Cu-6) |
| BS 4585-1-1983 |
香料和调味品的试验方法.第1部分:杂质的测定 |
(Methods of test for spices and condiments - Determination of extraneous matter) |
| BS 4585-11-1983 |
香料和调味品的试验方法.第11部分:脱水大蒜中挥发性有机硫化合物的测定 |
(Methods of test for spices and condiments - Determination of volatile organic sulphur compounds in dehydrated garlic) |
| BS 4585-12-1983 |
香料和调味品的试验方法.第12部分:胡椒的胡椒碱含量的测定 |
(Methods of test for spices and condiments - Determination of piperine content of pepper) |
| BS 4585-13-1983 |
香料和调味品的试验方法.第13部分:姜黄着色力的测定 |
(Methods of test for spices and condiments - Determination of colouring power of turmeric) |
| BS 4585-14-1983 |
香料和调味品的试验方法.第14部分:污物的测定 |
(Methods of test for spices and condiments - Determination of filth) |
| BS 4585-15-1985 |
香料和调味品的试验方法.第15部分:挥发油含量的测定 |
(Methods of test for spices and condiments - Determination of volatile oil content) |
| BS 4585-16-1990 |
香料和调味品的试验方法.第16部分:辣椒粉全天然着色物质含量的测定 |
(Methods of test for spices and condiments - Determination of total natural colouring matter content of ground (powdered) paprika) |
| BS 4585-18-1996 |
香料及调味品的试验方法.番椒和辣椒味松脂中辣椒素总含量的测定(高性能液相色谱法) |
(Methods of test for spices and condiments - Determination of total capsaicinoid content of chillies and chilli oleoresins (high-performance liquid chromatographic method)) |
| BS 4585-2-1982 |
香料和调味品的试验方法.第2部分:水份含量的测定(雾沫法) |
(Methods of test for spices and condiments - Determination of moisture content (entrainment method)) |
| BS 4585-3-1998 |
香料和调料的试验方法.总灰分的测定 |
(Methods of test for spices and condiments - Determination of total ash) |
| BS 4585-4-1988 |
香料和调味品的试验方法.第4部分:醇溶萃取物的测定 |
(Methods of test for spices and condiments - Determination of alcohol-soluble extract) |
| BS 4585-6-1992 |
香料和调味品的试验方法.第6部分:非挥发性乙醚萃取物的测定 |
(Methods of test for spices and condiments - Determination of non-volatile ether extract) |
| BS 4585-7-1989 |
香料和调味品的试验方法.第7部分:番椒的斯科尔指数的测定 |
(Methods of test for spices and condiments - Determination of Scoville index of chillies) |
| BS 4585-8-1977 |
香料和调味品的试验方法.第8部分:研磨细度等级的测定－手工筛分法(比较法) |
(Methods of test for spices and condiments - Determination of degree of fineness of grinding - hand sieving method (reference method)) |
| BS 4585-9-1998 |
香料和调味品的试验方法.酸溶灰分的测定 |
(Methods of test for spices and condiments - Determination of acid-insoluble ash) |
| BS 4588-1970 |
油印机重合测定的试验方法 |
(Methods of test for determining the registration obtained on duplicating machines) |
| BS 459-1988 |
外用木制拼板门扇规范 |
(Specification for matchboarded wooden door leaves for external use) |
| BS 4591-1990 |
有机液体(石油产品除外)蒸馏特性的测定方法 |
(Method for determination of distillation characteristics of organic liquids (other than petroleum products)) |
| BS 46-1-1958 |
键和键槽及锥形销.键和键槽规范 |
Keys and keyways and taper pins - Specification - Keys and keyways |
| BS 46-3-1951 |
键和键槽及锥形销.第3部分:一般工程用实心和锥形开尾销规范 |
(Keys and keyways and taper pins - Specification for solid and split taper pins for general engineering purposes) |
| BS 460-2002 |
铸铁雨水管件规范 |
(Cast iron rainwater goods - Specification) |
| BS 4601-1970 |
塑料材料的镍铬电镀层规范 |
(Specification for electroplated coatings of nickel plus chromium on plastics materials) |
| BS 4602-1977 |
玻璃容器及精整规范中米制单位的应用规范 |
(Specification for the use of metric units in specifications for glass containers and finishes) |
| BS 4603-1970 |
化学产品燃烧残余物或灰分的测定方法 |
(Method for determination of residue on ignition or ash of chemical products) |
| BS 4604-1-1970 |
结构钢制构件中高强度摩擦紧固螺栓的应用规范,米制系列.第1部分:普通螺拴 |
Specification for the use of high strength friction grip bolts in structural steelwork - Metric series - General grade |
| BS 4604-2-1970 |
结构钢制构件中高强度摩擦紧固螺栓的应用规范,米制系列.第2部分:高级螺拴(标准杆) |
(Specification for the use of high strength friction grip bolts in structural steelwork - Metric series - Higher grade (parallel shank)) |
| BS 4607-1-1984 |
电气装置用非金属导管及配件规范.绝缘材料配件和件规范 |
(Non-metallic conduits and fittings for electrical installations - Specification for fittings and components of insulating material) |
| BS 4607-3-1971 |
电气装置用非金属导管及配件规范.自熄性塑料制普通和增强的可弯波纹导管 |
Non-metallic conduits and fittings for electrical installations - Pliable corrugated, plain and reinforced conduits of self-extinguishing plastics material |
| BS 4607-5-1982 |
电气装置用非金属导管及配件规范.第5部分:绝缘材料制刚性导管、配件和件规范 |
Non-metallic conduits and fittings for electrical installations - Specification for rigid conduits, fittings and components of insulating material |
| BS 4611-1989 |
聚烯烃扁丝的试验方法 |
Methods of test for polyolefin tape yarns |
| BS 4617-1983 |
液压传动用泵和电动机性能的测定方法 |
Methods for determining the performance of pumps and motors for hydraulic fluid power transmission |
| BS 4618 Introduction-1970 |
塑料设计数据表示方法推荐标准.导论 |
Recommendations for the presentation of plastics design data - General introduction |
| BS 4618-1.1-1970 |
塑料设计数据表示方法推荐标准.第1部分:机械特性.第1节:蠕变 |
Recommendations for the presentation of plastics design data - Mechanical properties - Creep |
| BS 4618-1.1.1-1970 |
塑料设计数据表示方法推荐标准.第1部分:机械性能.第1节:蠕变.第1小节:单轴拉伸或压缩中的蠕变(专指固体塑料 |
(Recommendations for the presentation of plastics design data - Mechanical properties - Creep in uniaxial tension or compression (with particular reference to solid plastics)) |
| BS 4618-1.1.2-1976 |
塑料设计数据表示方法推荐标准.机械特性.蠕变.纸应变挠曲蠕变 |
Recommendations for the presentation of plastics design data - Mechanical properties - Creep in flexure at low strains |
| BS 4618-1.1.3-1974 |
塑料设计数据表示方法推荐标准.机械特性.蠕变.蠕变横向收缩比(泊松比) |
Recommendations for the presentation of plastics design data - Mechanical properties - Creep lateral contraction ratio (Poisson`s ratio) |
| BS 4618-1.2-1972 |
塑料设计数据表示方法推荐标准.第1部分:机械特性.第2节:冲击性能 |
Recommendations for the presentation of plastics design data - Mechanical properties - Impact behaviour |
| BS 4618-1.3-1975 |
塑料设计数据表示方法推荐标准.机械特性.强度 |
Recommendations for the presentation of plastics design data - Mechanical properties - Strength |
| BS 4618-1.3.1-1975 |
塑料设计数据表示方法推荐标准.第1部分:机械特性.第3.1节:静态疲劳损坏 |
Recommendations for the presentation of plastics design data - Mechanical properties - Static fatigue failure |
| BS 4618-1.3.3-1976 |
塑料设计数据表示方法推荐标准.机械特性.强度环境应力破裂 |
Recommendations for the presentation of plastics design data - Mechanical properties - Environmental stress cracking |
| BS 4618-2.1-1970 |
塑料设计数据表示方法推荐标准.第2部分:电气特性.第1节:介电常数 |
(Recommendations for the presentation of plastics design data - Electrical properties - Permittivity) |
| BS 4618-2.2-1970 |
塑料设计数据表示方法推荐标准.第2部分:电气特性.第2节:损耗角正切 |
Recommendations for the presentation of plastics design data - Electrical properties - Loss tangent |
| BS 4618-2.3-1975 |
塑料设计数据表示方法推荐标准.第2部分:电气特性.第3节:体积电阻率 |
(Recommendations for the presentation of plastics design data - Electrical properties - Volume resistivity) |
| BS 4618-2.4-1975 |
塑料设计数据表示方法推荐标准.电气特性.表面电阻率 |
(Recommendations for the presentation of plastics design data - Electrical properties - Surface resistivity) |
| BS 4618-3.1-1970 |
塑料设计数据表示方法推荐标准.第3部分:热特性.第1节:线性热膨胀 |
(Recommendations for the presentation of plastics design data - Thermal properties - Linear thermal expansion) |
| BS 4618-3.2-1973 |
塑料设计数据表示方法推荐标准.第3部分:热特性.第2节:热函数 |
(Recommendations for the presentation of plastics design data - Thermal properties - Heat content) |
| BS 4618-3.3-1973 |
塑料设计数据表示方法推荐标准.热特性.导热性 |
(Recommendations for the presentation of plastics design data - Thermal properties - Thermal conductivity) |
| BS 4618-4.1-1972 |
塑料设计数据表示方法推荐标准.第4部分:环境和化学效应.第1节:耐液体化学性 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - Chemical resistance to liquids) |
| BS 4618-4.2-1972 |
塑料设计数据表示方法推荐标准.第4部分:环境和化学效应.第2节:耐自然老化性 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - Resistance to natural weathering) |
| BS 4618-4.3-1974 |
塑料设计数据表示方法推荐标准.第4部分:环境和化学效应.第3节:耐光照变色性 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - Resistance to colour change produced by exposure to light) |
| BS 4618-4.4-1973 |
塑料设计数据表示方法推荐标准.第4部分:环境和化学效应.第4节:海上曝露的影响 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - The effect of marine exposure) |
| BS 4618-4.5-1974 |
塑料设计数据表示方法推荐标准.环境和化学效应.土埋及生物侵袭对塑料的影响 |
(Recommendations for the presentation of plastics design data - Environmental and chemical effects - The effect on plastics of soil burial and biological attack) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com