标准号 |
中文名称 |
英文名称 |
BS 3314-1982 |
液体加工用防护围裙规范 |
(Specification for protective aprons for wet work) |
BS 3316-1-1987 |
焚烧炉.第1部分:医院废物焚烧装置性能要求 |
(Incinerators. Specification for standard performance requirements for incineration plant for the destruction of hospital waste) |
BS 3316-2-1987 |
焚烧炉.第2部分:医院废物焚烧装置性能试验和计算方法 |
(Incinerators. Methods of test and calculation for the performance of incineration plant for the destruction of hospital waste) |
BS 3316-3-1987 |
焚烧炉.第3部分:医院废物焚烧装置买方要求的规范方法 |
(Incinerators. Method for specifying purchasers’ requirements for incineration plant for the destruction of hospital waste) |
BS 3316-4-1987 |
焚烧炉.第4部分:医院废物焚烧装置的设计、规范、安装和使用的实用规程 |
(Incinerators. Code of practice for the design, specification, installation and commissioning of incineration plant for the destruction of hospital waste) |
BS 3318-1978 |
土方机械规范.重心定位方法 |
(Specification for earth-moving machinery - method for locating the centre of gravity) |
BS 3320-1988 |
机织物纱线耐经纬滑动性的测定方法 |
(Method for determination of slippage resistance of yarns in woven fabrics: seam method) |
BS 3321-1986 |
织物的等效孔径测量方法(气泡压力试验) |
(Method for measurement of the equivalent pore size of fabrics (bubble pressure test)) |
BS 3322-1981 |
矩形尺和斜角规规范 |
(Specification for carpenters’ squares and bevels) |
BS 3323-1992 |
有关固体矿物燃料的取样、试验和分析的术语词汇 |
(Glossary of terms relating to sampling, testing and analysis of solid mineral fuels) |
BS 3332-1987 |
轴承用白合金锭规范 |
(Specification for white metal bearing alloy ingots) |
BS 3338-10-1961 |
锡及锡合金的取样及分析方法.第10部分:锡锭、锡铅焊料及轴承用白合金中铁的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)) |
BS 3338-11-1961 |
锡及锡合金的取样及分析方法.第11部分:焊料中锡的测定方法(镍带卷还原法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in solders (nickel coil reduction method)) |
BS 3338-13-1965 |
锡及锡合金的取样及分析方法.第13部分:焊料及轴承用白合金中锑的测定方法(溴酸钾容量法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)) |
BS 3338-14-1965 |
锡及锡合金的取样及分析方法.第14部分:轴承用白合金锭的取样方法 |
(Methods for the sampling and analysis of tin and tin alloys - Method for the sampling of white metal bearing alloy ingots) |
BS 3338-15-1965 |
锡及锡合金的取样及分析方法.第15部分:轴承用白合金中铜和铅的测定方法(电解镀层法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)) |
BS 3338-16-1965 |
锡及锡合金的取样及分析方法.第16部分:轴承用白合金中锡的测定方法(镍带卷还原法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)) |
BS 3338-17-1965 |
锡及锡合金的取样及分析方法.第17部分:焊料及轴承用白合金中镉的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)) |
BS 3338-18-1966 |
锡及锡合金的取样及分析方法.第18部分:焊料及轴承用白合金中铝的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)) |
BS 3338-19-1966 |
锡及锡合金的取样及分析方法.焊料及轴承用白合金中锌的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of zinc in solders and white metal bearing alloys (photometric method)) |
BS 3338-1966 |
锡及锡合金的取样及分析方法.第19部分:焊料及轴承用白合金中锌的测定方法 |
(光度测定法(Methods for the sampling and analysis of tin and tin alloys. Method for the determination of zinc in solders and white metal bearing alloys (photometric method)) |
BS 3338-2-1961 |
锡及锡合金的取样及分析方法.第2部分:锡锭中锡的测定方法(铝还原法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in ingot tin (aluminium reduction method)) |
BS 3338-20-1970 |
锡及锡合金的取样及分析方法.第20部分:浇灌金属中镍的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of nickel in capping metal (photometric method)) |
BS 3338-21-1983 |
锡及锡合金的取样及分析方法.第21部分:软焊料中高镉含量的测定方法 |
(Methods for the sampling and analysis of tin and tin alloys - Determination of high cadmium content of soft solders) |
BS 3338-3-1961 |
锡及锡合金的取样及分析方法.第3部分:锡锭中锑的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in ingot tin (photometric method)) |
BS 3338-4-1961 |
锡及锡合金的取样及分析方法.第4部分:锡锭及锡铅焊料中铜的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper in ingot tin and tin-lead solders (photometric method)) |
BS 3338-5-1961 |
锡及锡合金的取样及分析方法.第5部分:锡锭及锡锑焊料中铅的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of lead in ingot tin and tin-antimony solders (photometric method)) |
BS 3338-6-1961 |
锡及锡合金的取样及分析方法.第6部分:高纯度锡锭中铜的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper in high purity ingot tin (photometric method)) |
BS 3338-7-1961 |
锡及锡合金的取样及分析方法.第7部分:焊料中银的测定方法(硫氰酸铵容量法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of silver in solders (volumetric: ammonium thiocyanate method)) |
BS 3338-8-1961 |
锡及锡合金的取样及分析方法.第8部分:锡锭、锡铅焊料及轴承用白合金中铋的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)) |
BS 3338-9-1965 |
锡及锡合金的取样及分析方法.第9部分:锡锭、焊料及轴承用白合金中砷的测定方法(光度测定法) |
(Methods for the sampling and analysis of tin and tin alloys - Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)) |
BS 3347-1961 |
铁路信号跟踪电路用的电容器规范 |
(Specification for capacitors for railway signalling track circuits) |
BS 3348-1961 |
窦套针及套管规范 |
(Specification for antral trocars and cannulae) |
BS 3356-1990 |
织物弯曲长度和挠曲硬度的测定方法 |
(Method for determination of bending length and flexural rigidity of fabrics) |
BS 336-1989 |
消防软管接头与辅助设备的规范 |
(Specification for fire hose couplings and ancillary equipment) |
BS 3367-1999 |
不包括营救绳的消防队用绳索规范 |
(Specification for ropes and lines for fire service use other than for rope rescue purposes) |
BS 3375-1-1995 |
工效研究和组织与方法.第1部分:组织研究指南 |
(Management services - Guide to organization study.) |
BS 3375-2-1993 |
管理工作.方法研究指南 |
(Management services - Guide to method study) |
BS 3375-3-1993 |
管理工作.工作测量指南 |
(Management services - Guide to work measurement) |
BS 3375-4-1993 |
管理工作.工作性能管理指南 |
(Management services - Guide to work performance control) |
BS 3375-5-1997 |
管理服务器.工作测量中曝光极限、复原时间和放松时间的测定指南 |
(Management services - Guide to determination of exposure limits, recovery times and relaxation times in work measurement) |
BS 3376-1994 |
带或不带锅炉的烧固体矿物燃料的对流式通风明火炉规范 |
(Specification for open fires burning solid mineral fuels with convection, with or without boilers) |
BS 3377-1985 |
供家用固体矿物燃料装置用的锅炉规范 |
(Specification for boilers for use with domestic solid mineral fuel appliances) |
BS 3378-1986 |
烧固体矿物燃料的房间加热器规范 |
(Specification for roomheaters burning solid mineral fuels) |
BS 3379-2003 |
承重用挠性聚氨酯泡沫材料规范 |
(Flexible polyurethane cellular materials for loadbearing applications - Specification) |
BS 3379-2005 |
承重用改进燃烧性的柔性聚氨酯多孔材料.规范 |
|
BS 3381-1990 |
BS 1560钢法兰用绕制螺旋形密封垫规范 |
(Specification for spiral wound gaskets for steel flanges to BS 1560) |
BS 3382 Pts.1 and 2-1961 |
螺纹件上的电镀覆层规范.钢件上的镉.钢件上的锌 |
(Specification for electroplated coatings on threaded components - Cadmium on steel components - Zinc on steel components) |
BS 3382 Pts.3 and 4-1965 |
螺纹件上的电镀覆层规范.钢件上的镍或镍铬.铜和铜合金(包括黄铜)件上的镍或镍铬 |
(Specification for electroplated coatings on threaded components - Nickel or nickel plus chromium on steel components - Nickel or nickel plus chromium on copper and copper alloy (including brass) compo) |
BS 3382 Pts.5 and 6-1967 |
螺纹件上的电镀覆层规范.铜和铜合金(包括黄铜)件上的锡.铜和铜合金(包括黄铜)件上的银 |
(Specification for electroplated coatings on threaded components - Tin on copper and copper alloy (including brass) components - Silver on copper and copper alloy (including brass) components) |
BS 3382-7-1966 |
螺纹部件的电镀层规范.第7部分:螺纹件的厚电镀层 |
(Specification for electroplated coatings on threaded components - Thicker platings for threaded components) |
BS 3385-1973 |
直读袖珍式验电器曝光表规范 |
(Specification for direct reading pocket type electroscope exposure meters) |
BS 3388-1973 |
叉子、铁锹和铲规范 |
(Specification for forks, shovels and spades) |
BS 3388-2004 |
叉子、铁锹和铲.要求和试验方法 |
|
BS 3396-2-1987 |
塑料增强用的机织玻璃纤维织物.第2部分:退浆织物规范 |
(Woven glass fibre fabrics for plastics reinforcement - Specification for desized fabrics) |
BS 3396-3-1987 |
塑料增强用的机织玻璃纤维织物.第3部分:供聚酯树脂系统用的成品布规范 |
(Woven glass fibre fabrics for plastics reinforcement - Specification for finished fabrics for use with polyester resin systems) |
BS 3399-1961 |
船舶用变压器规范 |
(Specification for transformers for use in ships) |
BS 3401-1961 |
铍铜卷曲垫圈规范 |
(Specification for beryllium copper crinkle washers) |
BS 3402-1969 |
卫生陶瓷设备的质量规范 |
(Specification for quality of vitreous china sanitary appliances) |
BS 3403-1972 |
工业、铁路和海运用的指示转速表及速度表系统规范 |
(Specification for indicating tachometer and speedometer systems for industrial, railway and marine use) |
BS 3405-1983 |
颗粒状排出物(包括砂砾、灰埃)的简易测定方法 |
(Method for measurement of particulate emission including grit and dust (simplified method)) |
BS 3406-1-1986 |
粒度分布的测定方法.第1部分:粉末取样指南 |
(Methods for determination of particle size distribution - Guide to powder sampling) |
BS 3406-4-1993 |
粒度分布的测定方法.显微镜和成象分析方法指南 |
(Methods for determination of particle size distribution - Guide to microscope and image analysis methods) |
BS 3406-8-1997 |
粒度分布的测定方法.第7部分:光子相干谱 |
(Methods for determination of particle size distribution - Photon correlation spectroscopy) |
BS 3406-9-1997 |
粒度分布测定法.过滤器阻塞法的建议(死网眼) |
(Methods for determination of particle size distribution - Recommendations for the filter blockage method (mesh obscuration)) |
BS 3407-1982 |
焦炭筛选设备的评定指南 |
(Guide for assessing coke screening plant) |
BS 3408-1992 |
漆布规范 |
(Specification for tarpaulins) |
BS 3409-1-1961 |
金属丝螺纹镶件承受孔攻螺纹(统一标准粗牙螺纹和统一标准细牙螺纹)规范.第1部分:孔径为1/4英寸以上(含1/4英 |
(Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) - Diameters) |
BS 3409-2-1966 |
金属丝螺纹镶件承受孔攻螺纹(统一标准粗牙螺纹和统一标准细牙螺纹)规范 .第2部分:孔径为小于1/4英寸的孔 |
(Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) - Diameters below) |
BS 341-3-2002 |
可运输气体容器的阀门.阀门出口接头 |
(Transportable gas container valves - Valve outlet connections) |
BS 341-4-2004 |
可运输气体容器的阀门.减压装置 |
|
BS 3410-1961 |
一般工程用金属垫圈规范 |
(Specification for metal washers for general engineering purposes) |
BS 3412-1992 |
模塑和挤出用一般用途聚乙烯材料的规定方法 |
(Methods of specifying general purpose polyethylene materials for moulding and extrusion) |
BS 3415-1986 |
软百叶帘规范 |
(Specification for venetian blinds) |
BS 3416-1991 |
适用于与饮用水接触的冷涂沥青基覆层规范 |
(Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water) |
BS 3417-1-1984 |
农林拖拉机与机械用动力输出轴和防护装置.第1部分:动力输出驱动轴规范 |
(Power take-off shafts and guards for tractors and machinery for agriculture and forestry - Specification for power take-off drive shafts) |
BS 3417-3-1986 |
农林拖拉机与机械用动力输出轴和防护装置.第3部分:第1部分:动力输出驱动轴规范的补充要求和第2部分:防护装 |
(Power take-off shafts and guards for tractors and machinery for agriculture and forestry - Supplementary requirements to Part 1: ’specification for power take-off drive shafts’ and to Part 2: ’Methods) |
BS 3423-1986 |
实验室用玻璃真空器(包括干燥器)的设计推荐规范 |
(Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use) |
BS 3424-0-2000 |
涂层织物试验.各部分的索引 |
(Testing coated fabrics - Index of parts) |
BS 3424-10-1987 |
涂层织物试验.方法12A及12B.表面阻力测定 |
(Testing coated fabrics - Methods 12A and 12B Determination of surface drag) |
BS 3424-13-1999 |
涂层织物试验.光隙试验色牢度方法的选择指南 |
(Testing coated fabrics - Guide to the selection of methods for colour fastness to light testing) |
BS 3424-14-1985 |
涂层织物试验.方法16.湿摩擦和干摩擦色牢度及印花耐磨损性的测定方法 |
Testing coated fabrics - Method 16 - Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear |
BS 3424-16-1995 |
涂层织物测试.第16部分:透气性的测定 |
(Testing coated fabrics - Method 18 - Determination of air permeability) |
BS 3424-17-1987 |
涂层织物试验.方法20.浸水后尺寸稳定性的测定方法 |
(Testing coated fabrics - Method 20 - Method for determination of dimensional stability to water immersion) |
BS 3424-18-1986 |
涂层织物试验.方法21A 及21B.抗芯吸和侧向泄漏的测定方法 |
(Testing coated fabrics - Methods 21A and 21B - Methods for determination of resistance to wicking and lateral leakage) |
BS 3424-19-1989 |
涂层织物试验方法.方法22A、22B 及22C.硫锈蚀性的测定 |
(Testing coated fabrics - Methods 22A, 22B and 22C - Determination of sulphur staining) |
BS 3424-1989 |
涂层织物试验方法.第19部分:方法22A、22B 及22C:硫锈蚀性的测定 |
(Testing coated fabrics. Methods 22A, 22B and 22C. Determination of sulphur staining) |
BS 3424-20-1987 |
涂层织物试验.方法23.无拉力时机械松弛尺寸变化的测定方法 |
(Testing coated fabrics - Method 23 - Method for determination of dimensional changes on mechanical relaxation at zero tension) |
BS 3424-21-1993 |
涂层织物试验.方法24.伸长和拉伸永久变形的测定方法 |
(Testing coated fabrics - Method 24 - Method for determination of elongation and tension set) |
BS 3424-22-1983 |
涂层织物试验.方法25.聚氯乙烯涂层的熔化和硫化橡胶涂层的硫化程度的测定方法 |
(Testing coated fabrics - Method 25 - Methods for determination of fusion of PVC coatings and the state of cure of vulcanized rubber coatings) |
BS 3424-24-1990 |
涂层织物试验方法.第24部分:方法27A和27B:抗磨性的测定方法 |
(Testing coated fabrics - Methods 27A and 27B - Methods for determination of abrasion resistance) |
BS 3424-25-1993 |
涂层织物的试验方法.方法28:涂层厚度和任一扩展层厚度的测量方法 |
(Testing coated fabrics - Method 28 - Method for determination of the coating thickness and thickness of any expanded layer) |
BS 3424-26-1990 |
涂层织物试验方法.第26部分:方法29A、29B 及29C和29D:抗透水性和表面润湿性的测定方法 |
(Testing coated fabrics - Methods 29A, 29B, 29C and 29D - Methods for determination of resistance to water penetration and surface wetting) |
BS 3424-28-1995 |
涂层织物试验.第28部分:方法31.抛光光泽度的测定 |
(Testing coated fabrics - Method 31 - Determination of specular gloss) |
BS 3424-31-1990 |
涂层织物试验方法.第31部分:方法34:抗划痕性和粗擦损性的测定方法 |
(Testing coated fabrics - Method 34 - Method for determination of resistance to scuffing and snagging) |
BS 3424-34-1992 |
涂层织物试验方法.第34部分:方法37:水蒸气渗透系数的测定方法 |
(Testing coated fabrics - Method 37 - Method for determination of water vapour permeability index (WVPI)) |
BS 3424-36-1993 |
涂层织物试验.方法36:家用涂层织物耐洗涤尺寸稳定性的测定方法 |
(Testing coated fabrics - Method 39 - Method for determination of the dimensional stability of coated fabrics to domestic washing) |
BS 3424-38-1998 |
试验涂层织物.损伤碎裂强度的测定 |
(Testing coated fabrics - Determination of wounded burst strength) |
BS 3441-1995 |
牛奶和液态牛奶制品运输箱规范 |
(Specification for tanks for the transport of milk and liquid milk products) |
BS 3445-1-1992 |
牲畜饮水槽和配件.第1部分:水槽体,服务箱和供水系统规范 |
(Agricultural water troughs and water fittings - Specification for water trough bodies, service boxes and water supply system) |
BS 3445-2-1992 |
牲畜饮水槽和配件.第2部分:成套设备和操作实用规程 |
(Agricultural water troughs and water fittings - Code of practice for installation and operation) |
BS 3446-1-1990 |
耐火材料的术语汇编.第1部分:一般用语和生产用语 |
(Glossary of terms associated with refractory materials - General and manufacturing) |
BS 3446-2-1990 |
耐火材料的术语汇编.第2部分:适用于焦碳、玻璃、 水泥和其它非冶金工业的词汇 |
(Glossary of terms associated with refractory materials - Applications in the coke, glass, cement and other non-metallurgical industries) |
BS 3446-3-1990 |
耐火材料的术语词汇.第3部分:在冶金工业中的应用 |
(Glossary of terms associated with refractory materials - Applications in the metallurgical industries) |
BS 3447-1962 |
玻璃工业用术语词汇 |
(Glossary of terms used in the glass industry) |
BS 3449-1990 |
织物耐吸水性的试验方法(静态浸渍试验) |
(Method for resistance of fabrics to water absorption (static immersion test)) |
BS 3454-1995 |
煤矿用的1.9/3.3kV、300A螺栓连接防爆电缆连接器和适配器规范(包括380/660V和640/1100V,300A适配器) |
(Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines) |
BS 3455-1973 |
原子核科学技术用术语词汇 |
(Glossary of terms used in nuclear science and technology) |
BS 3456-202.46-1990 |
家用和类似用途电器的安全规范.第202部分:特殊要求.第46节:商用电蒸气锅 |
(Specification for safety of household and similar electrical appliances - Particular requirements - Specification for safety of household and similar electrical appliances - Particular requirements -) |
BS 3457-1973 |
水龙头与截止阀座垫圈材料规范 |
(Specification for materials for water tap and stopvalve seat washers) |
BS 3459-1985 |
制图板支架规范 |
(Specification for stands for drawing boards) |
BS 3463-1975 |
压力容器的水位观察和水位计用玻璃规范 |
(Specification for observation and gauge glasses for pressure vessels) |
BS 3466-1962 |
金属电阻材料每单位长度电阻试验方法 |
(Methods of test for resistance per unit length of metallic electrical resistance material) |
BS 3467-1962 |
精密电阻器用合金线的电阻温度系数试验方法 |
(Method of test for temperature coefficient of resistance of alloy wire for precision resistors) |
BS 3469-1985 |
仪器用精密滚动轴承(球轴承)规范 |
(Specification for instrument precision rolling bearings (ball bearings)) |
BS 3470-1975 |
工地大门和支柱规范 |
(Specification for field gates and posts) |
BS 3473-1-1991 |
制作实验室玻璃器皿用玻璃的耐化学腐蚀性.第1部分:玻璃抗混合强碱沸水溶液腐蚀性的测定方法 |
(Chemical resistance of glass used in the production of laboratory glassware - Method for determination of resistance of glass to attack by a boiling aqueous solution of mixed alkali) |
BS 3473-2-1987 |
制作实验室玻璃器皿用玻璃的耐化学腐蚀性.玻璃组织在98℃时耐水解性的测定方法 |
(Chemical resistance of glass used in the production of laboratory glassware - Method for determination of hydrolytic resistance of glass grains at 98 鳦) |
BS 3473-3-1987 |
制作实验室玻璃器皿用玻璃的耐化学腐蚀性.玻璃组织在121℃时耐水解性的测定方法 |
(Chemical resistance of glass used in the production of laboratory glassware - Method for determination of hydrolytic resistance of glass grains at 121 鳦) |
BS 3473-4.1-1989 |
制作实验室玻璃器皿用玻璃的耐化学腐蚀性.第4部分:玻璃容器内表面的耐水解性的测定方法.第1节:用滴定法和和 |
(Chemical resistance of glass used in the production of laboratory glassware - Methods for determination of hydrolytic resistance of the interior surfaces of glass containers - Determination by titrati) |