标准号 |
中文名称 |
英文名称 |
BS 3087-9-1986 |
夹扭钳和剪断钳.第9部分:斜嘴钳尺寸规范 |
(Pliers and nippers - Specification for dimensions of diagonal cutting nippers) |
BS 3088-1959 |
带镶齿刀头的可调手用铰刀规范 |
(Specification for adjustable hand reamers with inserted blades) |
BS 3090-1978 |
测定亚麻布料的铜氨流动度的试验方法 |
(Method of test for the determination of the cuprammonium fluidity of linen materials) |
BS 3092-1973 |
内燃机主摩擦离合器、主动力输出装置及其有关附件的规范 |
(Specification for main friction clutches, main power-take-off assemblies and associated attachments for internal combustion engines) |
BS 3095-1.2-1988 |
牛奶冻结点下降值的测定方法.霍尔特维特法 |
(Methods for determination of the freezing-point depression of milk - Methods - Hortvet method) |
BS 3095-2-1988 |
牛奶冻结点下降值的测定方法.第2部分:放牧牛奶冻结点下降说明的推荐规范 |
(Methods for determination of the freezing-point depression of milk - Recommendations for the interpretation of the freezing-point depression of herd milk) |
BS 3095-3-1980 |
牛奶冻结点下降值的测定方法.第3部分:样品贮存 |
(Methods for determination of the freezing-point depression of milk - Storage of samples) |
BS 31-1940 |
电气布线用钢导管和配件规范 |
(Specification - Steel conduit and fittings for electrical wiring) |
BS 3100-1991 |
一般工程用钢铸件规范 |
(Specification for steel castings for general engineering purposes) |
BS 3101-1986 |
主要与矿山用防爆式遏制插头座联用的控制电路和联锁电路规范 |
(Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines) |
BS 3104-1970 |
登山用聚酯胺(尼龙)绳规范 |
(Specification for polyamide (nylon) mountaineering ropes) |
BS 3107-1973 |
小型焚化炉规范 |
(Specification for small incinerators) |
BS 3108-1980 |
制造无色玻璃用石灰岩规范 |
(Specification for limestone for making colourless glasses) |
BS 3110-1959 |
印刷品耐磨性的测量方法 |
(Methods for measuring the rub resistance of print) |
BS 3122-1-1990 |
制冷压缩机.第1部分:性能试验方法 |
(Refrigerant compressors - Methods of test for performance) |
BS 3123-1959 |
弹簧卡规与弹簧量规规范 |
(Specification for spring calipers and spring dividers) |
BS 3125-1959 |
物料用电动桅杆式吊升机规范 |
(Specification for power-driven mast hoists for materials) |
BS 3127-1978 |
黑色与有色金属波登管规范 |
(Specification for ferrous and non-ferrous Bourdon tubing) |
BS 3129-1959 |
家具用胶乳泡沫橡胶部件规范 |
(Specification for latex foam rubber components for furniture) |
BS 3130-1-1990 |
包装的术语词汇.第1部分:总则(包括辅助材料) |
(Glossary of packaging terms - General (including auxiliary materials)) |
BS 3130-2-1990 |
包装的术语词汇.第2部分:纸与纸板包装 |
(Glossary of packaging terms - Paper and board packaging) |
BS 3130-5-1994 |
包装的术语词汇.塑料与软包装(纸除外) |
(Glossary of packaging terms - Plastics and flexible packaging (excluding paper)) |
BS 3130-6-1981 |
包装的术语词汇.第6部分:木包装 |
(Glossary of packaging terms - Wooden packaging) |
BS 3134-1-1979 |
米制锥形滚子轴承.第1部分:单列轴承的尺寸与公差规范 |
(Metric tapered roller bearings - Specification for dimensions and tolerances of single row bearings) |
BS 3134-2-1981 |
米制锥形滚子轴承.第2部分:双列轴承的尺寸规范 |
(Metric tapered roller bearings - Specification for dimensions of double row bearings) |
BS 3134-3-1981 |
米制锥形滚子轴承.第3部分:外环凸缘尺寸规范 |
(Metric tapered roller bearings - Specification for dimensions of flanged cups) |
BS 3134-4-1992 |
米制锥形滚柱轴承.第4部分:命名系统规范 |
(Metric tapered roller bearings - Specification for designation system) |
BS 3135-1989 |
燃气轮机验收试验规范 |
(Specification for gas turbine acceptance test) |
BS 3136-2-1972 |
道路用冷乳剂喷雾机.第2部分:米制单位 |
(Specification for cold emulsion spraying machines for roads - Metric units) |
BS 3137-1972 |
纸、纸板破裂强度的测定方法 |
(Methods for determining the bursting strength of paper and board) |
BS 3138-1992 |
管理行业用的术语词汇 |
(Glossary of terms used in management services) |
BS 3142-2-1990 |
家用经加工的固体无烟燃料规范.第2部分:家用可开启封闭式炉和敞炉用焦炭 |
(Specification for manufactured solid smokeless fuels for household use - Cokes for domestic openable and closed appliances and open fires with fan-assisted primary air) |
BS 3142-3-1970 |
家用经加工的固体无烟燃料规范.第3部分:各种家用敞炉专用活性燃料 |
Specification for manufactured solid smokeless fuels for household use - Specially reactive fuels for all types of domestic open fire |
BS 3143-1-1985 |
道路告警信号灯.第1部分:煤油灯规范 |
Road danger lamps - Specification for kerosine burning lamps |
BS 3143-2-1990 |
道路报警信号灯.第2部分:低亮度蓄电池灯规范 |
Road danger lamps - Specification for low-intensity battery-operated lamps |
BS 3143-4-1985 |
道路告警信号灯.第4部分:高亮度蓄电池灯规范 |
Road danger lamps - Specification for high intensity battery operated beacons |
BS 3144 Addendum No. 1-1981 |
皮革的取样和物理试验方法.附录1:皮革的耐弯曲和耐磨性 |
Sampling and physical testing of leather - Determination of resistance to bending and abrasion of heavy leather |
BS 3144 Addendum No. 2-1981 |
皮革的抽样方法和物理试验.水蒸气吸收测量 |
Sampling and physical testing of leather - Measurement of water vapour absorption |
BS 3145-1978 |
实验室用pH计规范 |
(Specification for laboratory pH meters) |
BS 3146-1-1974 |
金属熔模铸造规范.第1部分:碳素钢与低合金钢 |
Specification for investment castings in metal - Carbon and low alloy steels |
BS 3146-2-1975 |
金属熔模铸造规范.第2部分:耐蚀耐热钢、镍和钴基合金 |
Specification for investment castings in metal - Corrosion and heat resisting steels, nickel and cobalt base alloys |
BS 3156-10.3.1-1987 |
气体燃料的分析.一般方法.水露点和相关湿度的测定.表面冷却冷凝湿度计和它们的用途的一般性描述 |
Analysis of fuel gases - General methods - Determination of water dew point and relative humidity - Principles of cooled surface condensation hygrometers and general description of their use |
BS 3156-11.0.2-1998 |
燃料气体的分析.非生产气体用方法.通则.天然气的质量名称与符号 |
Analysis of fuel gases - Methods for non-manufactured gases - General - Quality designation for natural gas |
BS 3156-11.1.2-1997 |
燃气分析.非人造气体,碳氢化合物和惰性气体的方法.用气体色谱法展开分析 |
Analysis of fuel gases - Methods for non-manufactured gases - Hydrocarbons and inert gases - Extended analysis by gas chromatographic method |
BS 3156-11.2.3-1986 |
燃气的分析.第11部分:非人造煤气用方法.第2节:潜在液体烃含量的测定.第3小节:容积法 |
Analysis of fuel gases - Methods for non-manufactured gases - Determination of potential hydrocarbon liquid content - Volumetric method |
BS 3156-11.4.1-1994 |
燃气分析.天然气分析方法.天然气中硫化合物的测定.绪论 |
(Analysis of fuel gases - Methods for non-manufactured gases - Determination of sulfur compounds in natural gas - Introduction) |
BS 3156-11.4.2-1994 |
燃气分析.天然气分析方法.天然气中硫化合物的测定.用电化学检测器气相光谱法分析有气味硫化合物 |
Analysis of fuel gases - Methods for non-manufactured gases - Determination of sulfur compounds in natural gas - Odoriferous sulfur compounds by gas chromatography using an electrochemical detector |
BS 3156-11.4.4-1994 |
燃气分析.天然气分析方法.天然气中硫化合物的测定.用火焰光谱气相色谱法测定硫化氢,氧硫化碳和有气味硫含量 |
Analysis of fuel gases - Methods for non-manufactured gases - Determination of sulfur compounds in natural gas - Hydrogen sulfide, carbonyl sulfide, and sulfur-containing odorants by gas chromatography using a flame photometric detector |
BS 3156-11.5-1996 |
燃气分析.非制造气体法.在线分析系统的性能评估 |
(Analysis of fuel gases - Methods for non-manufactured gases - Performance evaluation for on-line analytical systems) |
BS 3156-11.6-1997 |
燃气的分析.非工艺气体法 |
(Analysis of fuel gases - Methods for non-manufactured gases - Determination of water content at high pressure) |
BS 3157-1960 |
运输基座用胶乳泡沫橡胶部件规范 |
(Specification for latex foam rubber components for transport seating) |
BS 3159-2-1993 |
手用木工锯.开榫锯与鸠尾锯规范 |
(Woodworking saws for hand use - Specification for tenon and dovetail saws) |
BS 3166-1959 |
温度范围在-20-220°F(-30-105℃)用的温度记录器(注入液体型与蒸汽压力型)规范 |
(Specification for thermographs (liquid-filled and vapour pressure types) for use within the temperature range -20 ℃ to 220 ℃ (-30 ℃ to 105 ℃)) |
BS 3169-1986 |
消防急救用编织胶管规范 |
(Specification for first aid reel hoses for fire-fighting purposes) |
BS 3170-1972 |
动力传动用挠性联轴器规范 |
(Specification for flexible couplings for power transmission) |
BS 3173-1996 |
床垫用弹簧组合件规范 |
(Specification for spring units for mattresses) |
BS 3175-1959 |
五氯苯酚规范 |
(Specification for pentachlorophenol) |
BS 3177-1959 |
包装用软片材料的水蒸汽渗透性的测定方法 |
(Method for determining the permeability to water vapour of flexible sheet materials used for packaging) |
BS 318-1988 |
涂料用氧化铬绿颜料规范 |
(Specification for chrome oxide green pigments for paints) |
BS 3181-1-1987 |
用气流法测定棉纤维性能的方法.第1部分:用单压气流法测定纤维细度值 |
(Methods for determination of cotton fibre properties by the airflow method - Determination of micronaire value by the single compression airflow method) |
BS 3182-4-1978 |
纺织机械与附件.综片、综框与钢筘.第4部分:片式筘梁的金属筘尺寸规范 |
(Textile machinery and accessories: healds, heald frames and reeds - Specification for metal reeds with plate baulk: dimensions) |
BS 3182-5-1978 |
纺织机械与附件.综片、综纩与钢筘.第5部分:双弹簧筘梁的金属筘尺寸规范 |
(Textile machinery and accessories: healds, heald frames and reeds - Specification for metal reeds with double-spring baulk: dimensions) |
BS 3183-1968 |
用气流法测定羊毛纤维直径的方法 |
(Method for the determination of wool fibre diameter by the airflow method) |
BS 3187-1978 |
导电的橡胶铺地材料规范 |
(Specification for electrically conducting rubber flooring) |
BS 3193-1993 |
家具用钢化玻璃板的规范 |
(Specification for thermally toughened glass panels for use in domestic appliances) |
BS 3195-3-1987 |
石油产品的取样方法.第3部分:含沥青粘结剂取样方法 |
(Methods for sampling petroleum products - Method for sampling bituminous binders) |
BS 3198-1981 |
家用铜质组合式热水贮存装置规范 |
(Specification for copper hot water storage combination units for domestic purposes) |
BS 3202-1-1991 |
实验室设备与配件.第1部分:绪论 |
(Laboratory furniture and fittings - Introduction) |
BS 3212-1991 |
液化石油气气相与液化石油气空气装置用挠性橡皮管、橡皮软管及软管组件规范 |
(Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations) |
BS 3214-1974 |
电瓶车保险连接器(额定电流 320安)规范 |
(Specification for locking connectors for battery operated vehicles (320 ampere rating)) |
BS 3215-1995 |
便携式可重复使用尿器规范 |
(Specification for reusable portable urinals) |
BS 3221-1-1985 |
药用量具.满刻度50ml的药用量具规范 |
(Medicine measures - Specification for medicine measures of 50 ml total graduated capacity) |
BS 3221-6-1987 |
药用量具.第6部分:5ml容量的药用立式塑料量匙规范 |
(Medicine measures - Specification for free-standing plastics medicine measuring spoons of 5 mL capacity) |
BS 3221-7-1995 |
药用量具.第7部分:药剂量5ml及最大5ml的口腔注射器规范 |
(Medicine measures - Specification for oral syringes delivering doses up to and including 5 ml) |
BS 3224-1-1988 |
民用机场的照明设备.进场航道精确指示器系统中用的照明设备规范 |
(Lighting fittings for civil land aerodromes - Specification for lighting units for use in precision approach path indicator systems) |
BS 3224-4-1988 |
民用机场的照明设备.高架的照明设备规范 |
(Lighting fittings for civil land aerodromes - Specification for elevated lighting units) |
BS 3224-5-1988 |
民用机场的照明设备.嵌入式照明设备规范 |
(Lighting fittings for civil land aerodromes - Specification for inset lighting units) |
BS 3224-6-1988 |
民用机场的照明设备.第6部分:障碍物照明设备规范 |
(Lighting fittings for civil land aerodromes - Specification for obstacle lighting units) |
BS 3226-1960 |
天然纤维绳用套管规范 |
(Specification for thimbles for natural fibre ropes) |
BS 3227-2003 |
丁基橡胶化合物(包括卤化丁基橡胶化合物)规范 |
(Butyl rubber compounds (including halobutyl compounds) - Specification) |
BS 3231-1960 |
空气温度在0-140°F(-20-60℃)范围内用的温度记录器规范 |
(Specification for thermographs (bimetallic type) for air temperatures within the range 0 ℃ to 140 ℃ (-20 ℃ to 60 ℃)) |
BS 3237-1960 |
矿山矿物运输用轻型中型车辆规范 |
(Specification for light and medium rolling stock for mineral haulage in mines) |
BS 3238-1-1960 |
伺服机构零件的图形符号.第1部分:饱和电抗器与磁放大器 |
(Graphical symbols for components of servo-mechanisms - Transductors and magnetic amplifiers) |
BS 3238-2-1964 |
伺服机构零件的图形符号.第2部分:普通伺服机构 |
(Graphical symbols for components of servo-mechanisms - General servo-mechanisms) |
BS 3241-1960 |
薄板挤压用韧化聚苯乙烯规范 |
(Specification for toughened polystyrene for sheet extrusion) |
BS 3243-1990 |
手动链轮滑车组规范 |
(Specification for hand-operated chain blocks) |
BS 3247-1991 |
冬季公路维护用喷撒盐的规范 |
(Specification for salt for spreading on highways for winter maintenance) |
BS 3248-1986 |
固体燃料器具用火花防护罩规范 |
(Specification for sparkguards for use with solid fuel appliances) |
BS 3250-1-1993 |
对流式家用固体矿物燃料燃烧器具的热试验方法.燃料损耗法 |
(Methods for thermal testing of domestic solid mineral fuel burning appliances with convection - Flue loss method) |
BS 3250-2-1994 |
对流式家用固体矿物燃料燃烧器具的热试验方法.防护罩法 |
(Methods for thermal testing of domestic solid mineral fuel burning appliances with convection - Methods for thermal testing of domestic solid mineral fuel burning appliances with convection - Hood met) |
BS 3251-1976 |
消防栓与应急给水用的指示板规范 |
(Specification - Indicator plates for fire hydrants and emergency water supplies) |
BS 3265-1960 |
黑白消毒液中焦油酸的测定方法 |
(Method for the determination of tar acids in black and white disinfectant fluids) |
BS 327-1964 |
动力驱动的桅杆起重机规范 |
(Specification for power-driven derrick cranes) |
BS 3271-1970 |
外科用弹性疝气吊带规范 |
(Specification for surgical elastic band trusses) |
BS 3273-1960 |
船用货物冷藏间的远距离指示温度计规范 |
(Specification for distant indicating thermometers for ships’ refrigerated cargo spaces) |
BS 3274-1960 |
普通管式热交换器规范 |
(Specification for tubular heat exchangers for general purposes) |
BS 3279-1960 |
虫胶规范 |
(Specification for seedlac) |
BS 328-1-1993 |
钻头和铰刀.麻花钻的规范 |
(Drills and reamers - Specification for twist drills) |
BS 328-2-1972 |
钻头和铰刀.第2部分:复合钻(中心钻)和埋头钻 |
(Drills and reamers - Combined drills and countersinks (centre drills)) |
BS 328-3-1983 |
钻头和铰刀.第3部分:修芯钻的尺寸规范 |
(Drills and reamers - Specification for the dimensions of core drills) |
BS 328-4-1983 |
钻头和铰刀.第4部分:铰刀的尺寸规范 |
Drills and reamers - Specification for dimensions of reamers |
BS 328-6-1992 |
钻头和铰刀.第6部分:有平行刀柄和实心导杆的90°埋头钻 |
(Drills and reamers - Countersinks, 90 ? with parallel shanks and solid pilots) |
BS 328-7-1992 |
钻头和铰刀.第7部分:直柄实心导杆平底钻 |
Drills and reamers - Counterbores with parallel shanks and solid pilots |
BS 328-8-1992 |
钻头和铰刀.锪孔钻 |
Drills and reamers - Spot drills |
BS 3282-1969 |
气相色谱法的术语词汇 |
(Glossary of terms relating to gas chromatography) |
BS 3283-1-1980 |
便携式电器用不可逆连接器与电器输入端(250V以下电路用).第1部分:13A连接器与电器输入端规范 |
(Non-reversible connectors and appliance inlets for portable electrical appliances (for circuits up to 250 V) - Specification for 13 A connector and appliance inlet) |
BS 3286-1960 |
季铵化合物消毒作用的悬浮液试验规程的实验室评定法 |
Method for laboratory evaluation of disinfectant activity of quaternary ammonium compounds by suspension test procedure |
BS 3288-1-1997 |
架空电力绝缘子与架空电力导线金具规范.第1部分:性能与一般要求 |
Insulator and conductor fittings for overhead power lines - Performance and general requirements |
BS 3288-2-1990 |
架空电力绝缘子与架空电力导线金具规范.第2部分:架空电力金具规范 |
Insulator and conductor fittings for overhead power lines - Specification for a range of fittings |
BS 3288-3-1989 |
架空电力导线绝缘和导电配件.绝缘子组件的球窝连接尺寸 |
Insulator and conductor fittings for overhead power lines - Dimensions of ball and socket couplings of string insulator units |
BS 3288-4-1989 |
架空电力导线绝缘和导电配件规范.第4部分:绝缘子组件的球窝连接的锁定装置尺寸和试验 |
Insulator and conductor fittings for overhead power lines - Locking devices for ball and socket couplings of string insulator units: dimensions and tests |
BS 3289-1990 |
地下矿井用纺织帘布层传送带(包括防火性能)规范 |
(Specification for textile carcase conveyor belting for use in underground mines (including fire performance)) |
BS 3289-2005 |
地下矿井用纺织帘布层传送带(包括防火性能).规范 |
|
BS 3289-2005 |
地下矿井用纺织帘布层传送带(包括防火性能).规范 |
|
BS 3293-1960 |
石油工业用碳素钢管法兰(公称尺寸24英寸以上)规范 |
Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry |
BS 3297-2-1993 |
公称电压1000V以上的系统用室内和室外支柱绝缘子的性能 |
(Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V) |
BS 3297-3-1982 |
公称电压1000V以上的陶瓷材料或玻璃支柱绝缘子.第3部分:绝缘子实用规程 |
(Post insulators of ceramic material or glass for nominal voltages greater than 1000 V. Guide to insulator practice) |
BS 3300-1985 |
家用无烟囱煤油对流式加热器与烹调器规范 |
(Specification for paraffin unflued space heating and cooking appliances for domestic use) |
BS 3313-1-1968 |
奶制品容器用的铝覆盖箔和铝带规范.第1部分:玻璃容器用的铝覆盖箔 |
(Specification for aluminium capping foil and strip for dairy product containers - Aluminium capping foil for glass containers) |
BS 3313-2-1968 |
奶制品容器用的铝覆盖箔和铝带规范.第2部分:塑料容器防护罩的铝覆盖箔 |
(Specification for aluminium capping foil and strip for dairy product containers - Aluminium capping foil for skirted closures for plastics containers) |