标准号 |
中文名称 |
英文名称 |
| BS 4401-11-1995 |
肉及肉制品的试验方法.第11部分:羟基脯氨酸含量的测定 |
(Methods of test for meat and meat products - Determination of hydroxyproline content) |
| BS 4401-12-1979 |
肉及肉制品的试验方法.第12部分:肉制品中淀粉含量的测定(比较法) |
(Methods of test for meat and meat products - Determination of starch content of meat products (reference method)) |
| BS 4401-13-1979 |
肉及肉制品的试验方法.第13部分:葡萄糖酸-δ－内酯含量的测定(比较法) |
(Methods of test for meat and meat products - Determination of glucono-delta-lactone content (reference method)) |
| BS 4401-14-1979 |
肉及肉制品的试验方法.第14部分:Ｌ－(＋)－谷氨酸含量的测定(比较法) |
(Methods of test for meat and meat products - Determination of L-(+)-glutamic acid content (reference method)) |
| BS 4401-15-1981 |
肉及肉制品的试验方法.第15部分:多磷酸盐的检测 |
(Methods of test for meat and meat products - Detection of polyphosphates) |
| BS 4401-16-1996 |
肉及肉制品的试验方法.氯化物含量的测定(电位测量法) |
(Methods of test for meat and meat products - Determination of chloride content (potentiometric method)) |
| BS 4401-17-1998 |
肉及肉制品的试验方法.氯霉素含量的测定(液相法) |
(Methods of test for meat and meat products - Determination of chloramphenicol content (liquid chromatographic method)) |
| BS 4401-18-1998 |
肉及肉制品的试验方法.淀粉和葡萄糖含量的测定(酶催法) |
(Methods of test for meat and meat products - Determination of starch and glucose contents (enzymatic method)) |
| BS 4401-2-1980 |
肉及肉制品的试验方法.第2部分:氮含量的测定(比较法) |
(Methods of test for meat and meat products - Determination of nitrogen content (reference method)) |
| BS 4401-3-1997 |
肉及肉制品的试验方法.第3部分:水份含量的测定(比较法) |
(Methods of test for meat and meat products - Determination of moisture content (reference method)) |
| BS 4401-4-1970 |
肉及肉制品的试验方法.第4部分:全脂肪含量的测定 |
(Methods of test for meat and meat products - Determination of total fat content) |
| BS 4401-5-1996 |
肉及肉制品的试验方法.第5部分:游离脂肪含量的测定 |
(Methods of test for meat and meat products - Determination of free fat content) |
| BS 4401-6-1996 |
肉及肉制品的试验方法.第6部分:氯化物的测定(伏哈德法) |
(Methods of test for meat and meat products - Determination of chloride content (Volhard method)) |
| BS 4401-7-1976 |
肉及肉制品的试验方法.第7部分:硝酸盐含量的测定 |
(Methods of test for meat and meat products - Determination of nitrate content) |
| BS 4401-8-1976 |
肉及肉制品的试验方法.第8部分:亚硝酸盐含量的测定 |
(Methods of test for meat and meat products - Determination of nitrite content) |
| BS 4401-9-1976 |
肉及肉制品的试验方法.第9部分:pH值的测量 |
(Methods of test for meat and meat products - Measurement of pH) |
| BS 4405-1990 |
液体肥皂规范 |
(Specification for liquid soap) |
| BS 4406-1969 |
渔网结网线的特数制命名规范 |
(Specification for the designation in the tex system of netting yarns for fishing nets) |
| BS 4407-1988 |
纤维混纺织物的定量分析方法 |
(Methods for quantitative analysis of fibre mixtures) |
| BS 4409-1-1991 |
螺旋输送机.第1部分:固定式槽型规范 |
(Screw conveyors - Specification for fixed trough type) |
| BS 4409-2-1991 |
螺旋输送机.第2部分:轻型和移动式(螺旋推运器)规范 |
(Screw conveyors - Specification for portable and mobile type (augers)) |
| BS 4409-3-1982 |
螺旋输送机.第3部分:传动功力的计算方法 |
(Screw conveyors - Method for calculating drive power) |
| BS 4411-1969 |
木材切割用带锯条规范 |
(Specification for woodcutting bandsaw blades) |
| BS 4415-1-1992 |
纸和纸板抗拉性能测定.恒定加载率法 |
(Determination of the tensile properties of paper and board - Constant rate of loading method) |
| BS 442-1950 |
铁路信号用电气装置的接线端规范 |
(Specification for terminals for electrical apparatus for railway signalling purposes) |
| BS 4420-1990 |
纸、纸板粗糙度测定的本特森测定方法 |
(Method for determination of the Bendtsen roughness of paper and board) |
| BS 4422-1-1987 |
火灾术语词汇.第1部分:火灾的一般术语和现象 |
(Glossary of terms associated with fire - General terms and phenomena of fire) |
| BS 4422-2-1990 |
火灾术语词汇.结构防火 |
(Glossary of terms associated with fire - Structural fire protection) |
| BS 4422-3-1990 |
火灾术语词汇.火灾的检测和警报 |
(Glossary of terms associated with fire - Fire detection and alarm) |
| BS 4422-4-1994 |
火灾术语词汇.灭火设备 |
(Glossary of terms associated with fire - Fire extinguishing equipment) |
| BS 4422-5-1989 |
火灾术语词汇.第5部分:烟控制 |
(Glossary of terms associated with fire - Smoke control) |
| BS 4422-6-1988 |
火灾术语词汇.第6部分:撤离和疏散设施 |
(Glossary of terms associated with fire - Evacuation and means of escape) |
| BS 4422-7-1988 |
火灾术语词汇.第7部分:爆炸检测和抑制方法 |
(Glossary of terms associated with fire - Explosion detection and suppression means) |
| BS 4422-9-1990 |
火灾术语词汇.第9部分:船舶消防术语 |
(Glossary of terms associated with fire - Marine terms) |
| BS 4427-1-1969 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第1部分:三磷酸钠中水不溶物质含量的测定 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of matter insoluble in water in sodium tr) |
| BS 4427-10-1976 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第10部分:全氧化磷(V)含量的测定:磷钼酸喹啉 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of total phosphorus (V) oxide content: qu) |
| BS 4427-11-1983 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第11部分:用柱色谱法分离并测定不同类型的磷 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Separation by column chromatography and determination o) |
| BS 4427-12-1979 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.工业(包括食品)用缩聚磷酸盐.砷含量的测定. |
() |
| BS 4427-14-1989 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第14部分:工业(包括食品)用缩聚磷酸盐:氯化 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Condensed phosphates for industrial use (including food) |
| BS 4427-15-1982 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第15部分:工业(包括食品)用缩聚磷酸盐.氧化 |
() |
| BS 4427-2-1969 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第2部分:三磷酸钠pH值的测定 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Measurement of pH value of sodium tripolyphosphate) |
| BS 4427-3-1989 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第3部分:工业(包括食品)用缩聚磷酸盐铁含量 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Condensed phosphates for industrial use (including food) |
| BS 4427-4-1969 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第4部分:烧失量的测定 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of loss on ignition) |
| BS 4427-5-1974 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第5部分:粒度分布的测定 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of particle size distribution) |
| BS 4427-6-1974 |
工业用三磷酸钠(三磷酸五钠)和焦磷酸钠(焦磷酸四钠)的试验方法.第6部分:焦磷酸钠中焦磷酸盐(含量)的估算 |
(Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Estimation of pyrophosphate content of sodium pyrophosp) |
| BS 4428-1989 |
一般园林经营管理的实用规程(不包括硬质地面) |
(Code of practice for general landscape operations (excluding hard surfaces)) |
| BS 4429-1987 |
一般工程、起重和吊管器用夹索螺旋夹具和螺旋扣规范 |
(Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications) |
| BS 4430-2-1969 |
工业机动车辆安全推荐.第2部分:操作和维护 |
(Recommendations for the safety of powered industrial trucks - Operation and maintenance) |
| BS 4431-1989 |
液化无水氨的取样和试验方法 |
(Methods of sampling and test for liquefied anhydrous ammonia) |
| BS 4432-1-1995 |
纸浆、纸与纸板光学特性的测定方法.第1部分:纸,纸板及纸浆的漫反射因数的测量 |
(Methods for determining optical properties of pulp, paper and board - Measurement of diffuse reflectance factor of paper, board and pulps) |
| BS 4433-1-1994 |
额定输出达45KW的家用固体矿物燃料锅炉.带有炉底除灰的锅炉的规范 |
(Domestic solid mineral fuel fired boilers with rated output up to 45 kW - Domestic solid mineral fuel fired boilers with rated output up to 45 kw - Specification for boilers with undergrate ash remova) |
| BS 4433-2-1994 |
额定输出达45KW的家用固体矿物燃料锅炉.烧小块无烟煤的重力给煤锅炉规范 |
(Domestic solid mineral fuel fired boilers with rated output up to 45 kW - Specification for gravity feed boilers designed to burn small anthracite) |
| BS 4436-1978 |
前伸式和龙门式起重叉车规范.稳定性试验 |
(Specification for reach and straddle fork lift trucks - stability tests) |
| BS 4438-1969 |
文件柜和悬挂式文件袋规范 |
(Specification for filing cabinets and suspended filing pockets) |
| BS 4439-1969 |
一般用螺柱规范.米制系列 |
(Specification for screwed studs for general purposes - Metric series) |
| BS 4442-1-1969 |
车床轴头及面板规范.第1部分:A 式和卡姆洛克式 |
(Specification for lathe spindle noses and faceplates - Types ’A’ and ’Camlock’) |
| BS 4443-7-1992 |
软质微孔材料的试验方法.第7部分:方法17:用整皮测定软质微孔材料撕裂强度的方法.方法18:在潮湿条件下测定加 |
(Methods of test for flexible cellular materials - Method 17 - Determination of tear strength of flexible cellular material with an integral skin - Method 18 - Determination of compression set under hu) |
| BS 4444-1989 |
电气接地监测和保护线检验指南 |
(Guide to electrical earth monitoring and protective conductor proving) |
| BS 4445-1969 |
烃类原料气化和转化装置的试验一览表 |
(Schedule of tests for gasification and reforming plants using hydrocarbon feedstocks) |
| BS 4447-1973 |
后张结构用预应力钢筋锚固件性能规范 |
(Specification for the performance of prestressing anchorages for post-tensioned construction) |
| BS 4448-1988 |
学生用练习簿及其纸张规范 |
(Specification for school exercise books and papers) |
| BS 4449-1997 |
混凝土配筋用碳素钢筋规范 |
(Specification for carbon steel bars for the reinforcement of concrete) |
| BS 4449-2005 |
混凝土配筋用钢.可焊钢筋.棒材、卷材和开卷产品.规范 |
|
| BS 4462-1969 |
测量仪器和过程控制设备销售技术资料的制订指南 |
(Guide for the preparation of technical sales literature for measuring instruments and process control equipment) |
| BS 4463-1969 |
一般工程用卷曲垫圈规范.米制系列 |
(Specification for crinkle washers for general engineering purposes - Metric series) |
| BS 4464-1969 |
一般工程和汽车用弹簧垫圈规范.米制系列 |
(Specification for spring washers for general engineering and automobile purposes - Metric series) |
| BS 4465-1990 |
客货两用电动提升机的设计和结构规范 |
(Specification for design and construction of electric hoists for both passengers and materials) |
| BS 4467-1991 |
为老年人设计用尺寸指南 |
(Guide to dimensions in designing for elderly people) |
| BS 4470-1996 |
异丁烯-异戊二烯生橡胶(IIR)硫化特性的估算方法 |
(Method for evaluation of vulcanization characteristics of isobutene-isoprene rubber (IIR)) |
| BS 4475-2000 |
纯矿物润滑油规范 |
(Specification for straight mineral lubricating oils) |
| BS 4478-1969 |
彩色电视差转机用电子管相互调制分量的测量方法 |
(Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers) |
| BS 4479-1-1990 |
层覆物品的设计.一般推荐方法 |
(Design of articles that are to be coated - General recommendations) |
| BS 4479-2-1990 |
层覆物品的设计.电镀和自动催化覆层的推荐方法 |
(Design of articles that are to be coated - Recommendations for electroplated and autocatalytic coatings) |
| BS 4479-3-1990 |
层覆物品的设计.转化膜的推荐方法 |
(Design of articles that are to be coated - Recommendations for conversion coatings) |
| BS 4479-4-1990 |
层覆物品的设计.第4部分:油漆和清漆覆层的推荐方法 |
(Design of articles that are to be coated - Recommendations for paint coatings and varnish coatings) |
| BS 4479-5-1990 |
层覆物品的设计.阳极氧化覆层的推荐方法 |
(Design of articles that are to be coated - Recommendations for anodic oxidation coatings) |
| BS 4479-7-1990 |
层覆物品的设计.热喷覆层的推荐方法 |
(Design of articles that are to be coated - Recommendations for thermally sprayed coatings) |
| BS 4479-8-1990 |
层覆物品的设计.搪瓷覆层的推荐方法 |
(Design of articles that are to be coated - Recommendations for vitreous enamel coatings) |
| BS 4479-9-1990 |
层覆物品的设计.低压和真空淀积覆层的推荐方法 |
(Design of articles that are to be coated - Recommendations for low pressure and vacuum deposited coatings) |
| BS 448-1-1981 |
电子管尺寸.第1部分:ＩＥＣ尺寸 |
(Dimensions of electronic tubes and valves - IEC dimensions) |
| BS 448-2-1981 |
电子管尺寸.第2部分:英国电子管尺寸规范 |
(Dimensions of electronic tubes and valves - Specification for dimensions of United Kingdom electronic tubes) |
| BS 4480-1-1992 |
滑动轴承.米制系列.第1部分:烧结轴衬的尺寸和公差 |
(Plain bearings: metric series - Sintered bushes - Dimensions and tolerances) |
| BS 4480-2-1974 |
滑动轴承规范.米制系列.第2部分:整体塑料轴套 |
(Specification for plain bearings: metric series - Solid plastics bushes) |
| BS 4480-3-1993 |
滑动轴承.米制系列.第3部分:铜合金套管 |
(Plain bearings: metric series - Copper alloy bushes) |
| BS 4480-4-1979 |
滑动轴承规范.米制系列.第4部分:卷制轴套尺寸,公差及检验方法 |
(Specification for plain bearings: metric series - Dimensions, tolerances and methods of checking wrapped bushes) |
| BS 4480-5-1979 |
滑动轴承.米制系列.薄壁半轴承的尺寸.公差及检验方法 |
(Plain bearings: metric series - Dimensions, tolerances and methods of checking thin-walled half bearings) |
| BS 4480-6-1984 |
滑动轴承规范.米制系列.第6部分:带材制环形止推垫圈的尺寸和公差规范 |
(Plain bearings: metric series - Specification for dimensions and tolerances of ring type thrust washers made from strip) |
| BS 4480-7-1984 |
滑动轴承规范.米制系列.第7部分:压制双金属半止推垫圈的尺寸和公差规范 |
(Plain bearings: metric series - Specification for dimensions and tolerances of pressed bimetallic half thrust washers) |
| BS 4480-8-1984 |
滑动轴承规范.米制系列.第8部分:薄壁法兰联接半轴承的尺寸.公差及检验方法 |
(Plain bearings: metric series - Specification for dimensions, tolerances and methods of checking of thin-walled flanged half bearings) |
| BS 4480-9-1995 |
滑动轴承:测量系列.外衬套的外部直径测量 |
(Plain bearings: metric series - Checking the outside diameter of wrapped bushes) |
| BS 4481-2-1983 |
粘合研磨产品.第2部分:砂轮和砂片的尺寸规范 |
(Bonded abrasive products - Specification for dimensions of grinding wheels and segments) |
| BS 4482-1985 |
混凝土配筋用冷轧钢丝规范 |
(Specification for cold reduced steel wire for the reinforcement of concrete) |
| BS 4482-2005 |
混凝土配筋用钢丝.规范 |
|
| BS 4483-1998 |
混凝土配筋用钢丝网 |
(Steel fabric for the reinforcement of concrete) |
| BS 4483-2005 |
混凝土配筋用钢筋网.规范 |
|
| BS 4484-1-1969 |
施工用测量仪器规范.线性测量用仪器的米制分度和校正 |
(Specification for measuring instruments for constructional works - Metric graduation and figuring of instruments for linear measurement) |
| BS 4485-2-1988 |
水冷却塔规范.第2部分:性能试验方法 |
(Water cooling towers - Methods for performance testing) |
| BS 4485-3-1988 |
水冷却塔规范.第3部分:热设计和功能设计实用规程 |
(Water cooling towers - Code of practice for thermal and functional design) |
| BS 4485-4-1996 |
水冷却塔规范.第4部分:冷却塔的结构设计使用规程 |
(Water cooling towers - Code of practice for structural design and construction) |
| BS 4486-1980 |
混凝土预加应力用热轧和热轧并处理的高抗拉强度的合金钢筋规范 |
(Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete) |
| BS 449-2-1969 |
结构钢在建筑上的应用规范.第2部分:米制件 |
(Specification for the use of structural steel in building - Metric units) |
| BS 4493-1969 |
电镀用铜盐规范 |
(Specification for copper salts for electroplating) |
| BS 4495-1969 |
陶瓷和金属陶瓷覆层的熔喷法推荐标准 |
(Recommendations for the flame spraying of ceramic and cermet coatings) |
| BS 4496-1984 |
纸浆的酸不溶灰分测定方法 |
(Method for determination of acid-insoluble ash of pulp) |
| BS 4497-1969 |
纸中氮处理剂的检测和估算推荐标准 |
(Recommendations for the detection and estimation of nitrogenous treating agents in paper) |
| BS 4498-1982 |
纸浆卡帕值(脱除木质素度)的测定方法 |
(Method for determination of the Kappa number of pulp (degree of delignification)) |
| BS 4499-1984 |
纸浆碱溶解度的测定方法 |
(Method for determination of alkali solubility of pulp) |
| BS 450-1958 |
机器螺钉与机器螺母(B.S.W和 B.S.F螺纹)规范 |
(Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)) |
| BS 4500-4-1985 |
ISO 极限与配合.第4部分:锥度C=1:3至1:500、长度6mm至630mm和直径达500mm的圆锥(锥度)配合制规范 |
(ISO limits and fits - Specification for system of cone (taper) fits for cones from C=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm) |
| BS 4500-5-1988 |
ISO 极限与配合.第5部分:C=1:3至1:500、长度6mm至630mm的圆锥形工件用锥度公差制规范 |
(ISO limits and fits - Specification for system of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 mm to 630 mm) |
| BS 4500A-1970 |
ISO极限与配合.数据表:选用的ISO配合－基孔制 |
(ISO limits and fits - Data sheet: selected ISO fits - hole basis) |
| BS 4500B-1970 |
ISO极限与配合.数据表:选用的ISO配合－基轴制 |
(ISO limits and fits - Data sheet: selected ISO fits - shaft basis) |
| BS 4504-3.3-1989 |
管、阀门及配件用圆法兰(标定额定压力标志数的).钢、铸铁和铜合金法兰.第3节:铜合金和组合法兰规范 |
(Circular flanges for pipes, valves and fittings (PN designated) - Specification for copper alloy and composite flanges) |
| BS 4505-1-1981 |
数字数据传输.第1部分:基本型控制规程规范 |
(Digital data transmission - Specification for basic mode control procedures) |
| BS 4505-2-1990 |
数字数据传输.第2部分:起/止传输和同步传输用字符结构 |
(Digital data transmission - Character structure for start/stop and synchronous transmission) |
| BS 4505-3-1981 |
数字数据传输.第3部分:纵向奇偶检测误差在信息性信息中的使用方法 |
(Digital data transmission - Method for use of longitudinal parity to detect errors in information messages) |
| BS 4506-1970 |
轴端规范 |
(Specification for shaft ends) |
| BS 4507-1969 |
润滑脂枪套筒(组合式)规范 |
(Specification for grease gun cartridges (composite type)) |
| BS 4508-1-1986 |
绝热地下管道.第1部分:有气隙的外加钢套管系统规范 |
(Thermally insulated underground pipelines - Specification for steel cased systems with air gap) |
| BS 4508-4-1977 |
绝热地下管道.无气隙的外加套管系统的特殊试验及检验要求 |
(Thermally insulated underground pipelines - Specific testing and inspection requirements for cased systems without air gap) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com