标准号 |
中文名称 |
英文名称 |
BS EN ISO 11212-4-1997 |
淀粉和淀粉制品.重金属含量.电热原子化原子吸收光谱法测定镉含量 |
(Starch and derived products - Heavy metals content - Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization) |
BS EN ISO 11213-1995 |
淀粉和淀粉制品的检验.用酶催化法测定淀粉的乙酰基的含量 |
(Modified starch - Determination of acetyl content - Enzymatic method) |
BS EN ISO 11214-1996 |
改进的淀粉.氧化淀粉中羟基团含量的测定 |
(Modified starch - Determination of carboxyl group content of oxidized starch) |
BS EN ISO 11215-1998 |
改良淀粉.乙酰二淀粉己二酸酯中己二酸含量的测定.气相色谱法 |
(Modified starch - Determination of adipic acid content of acetylated di-starch adipates - Gas-chromatographic method) |
BS EN ISO 11216-1998 |
改良淀粉.羧甲基淀粉中羧甲基团含量的测定 |
(Modified starch - Determination of content of carboxymethyl groups in carboxymethyl starch) |
BS EN ISO 11244-2000 |
牙科用铜焊包埋料 |
(Dental brazing investments) |
BS EN ISO 11245-2000 |
牙齿修复.磷酸盐粘结耐火模铸材料 |
(Dental restorations - Phosphate-bonded refractory die materials) |
BS EN ISO 11252-2004 |
激光和激光相关设备.激光装置.文献工作的最低要求 |
|
BS EN ISO 11254-1-2000 |
激光和激光相关设备.光表面激光诱导损伤阈的测定.1-on-1试验 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - 1-on-1 test) |
BS EN ISO 11254-2-2001 |
激光和激光相关设备.光表面激光导至损伤阈值的测定.S-on-1试验 |
(Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - S-on-1 test) |
BS EN ISO 1127-1997 |
不锈钢管.尺寸、公差和单位长度的规范质量 |
(Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length) |
BS EN ISO 11290-1-1997 |
食品和动物饲料的微生物分析法.单核细胞增多性利斯特菌的计算和横向检测法.检测方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Detection method) |
BS EN ISO 11290-2-1998 |
食品和动物饲料的微生物分析法.单核细胞增多性利斯特菌的计算和横向检测法.计算方法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Enumeration method) |
BS EN ISO 11306-1998 |
金属和合金腐蚀.表面海水中金属和合金暴露后的评估指南 |
(Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water) |
BS EN ISO 1133-2005 |
塑料.热塑性塑料熔体质量流速(MFR)和熔体体积流速(MVR)的测定 |
|
BS EN ISO 11334-1-1997 |
用胳膊操作的助步器的要求和试验方法.第1部分:肘支撑器 |
(Walking aids manipulated by one arm - Requirements and test methods - Elbow crutches) |
BS EN ISO 11334-4-1999 |
用一只胳膊操作的助步器.要求和试验方法.具有三条或更多条腿支撑的步行器扶杖 |
(Walking aids manipulated by one arm - Requirements and test methods - Walking sticks with three or more legs) |
BS EN ISO 11337-2004 |
塑料.聚酰胺.用气相色谱法测定e-己内酰胺和w-laurolactam |
|
BS EN ISO 11337-2004 |
塑料.聚酰胺.用气相色谱法测定e-己内酰胺和w-laurolactum |
|
BS EN ISO 11337-2004 |
塑料.聚酰胺.用气相色谱法测定e-己内酰胺和w-laurolactum |
|
BS EN ISO 11341-1995 |
涂料和清漆.人工气候和人工照射的辐照量.已过滤的氙弧照射的辐照量 |
(Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation) |
BS EN ISO 11341-2004 |
色漆和清漆.模拟气候及模拟辐射曝晒.氙弧灯曝晒 |
|
BS EN ISO 11348-1-1999 |
水质.有关费歇尔弧菌属的光发射水样品的抑制效果的测定(发光细菌试验).第2部分:使用新制备细菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Method using freshly prepared bacteria) |
BS EN ISO 11348-2-1999 |
水质.有关费歇尔弧菌属的光发射水样品的抑制效果的测定(发光细菌试验).第2部分:使用液体干细菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Method using liquid-dried bacteria) |
BS EN ISO 11348-3-1999 |
水质.有关 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Method using freeze-dried bacteria) |
BS EN ISO 1135-4-2004 |
医用输血器具.一次性使用输血器 |
|
BS EN ISO 11357-1-1997 |
塑料.特定扫描量热法(DSC).第1部分:一般原理 |
(Plastics - Differential scanning calorimetry (DSC) - General principles) |
BS EN ISO 11358-1997 |
塑料.高聚物的热重分析法(TG).一般原理 |
(Plastics - Thermogravimetry (TG) of polymers - General principles) |
BS EN ISO 11369-1997 |
水质.精选出植物处理剂的测定.固液萃取后采用带UV检测的高性能液体色谱法 |
(Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction) |
BS EN ISO 11378-2-2001 |
织物地板覆盖物.实验室土壤试验.转鼓试验 |
(Textile floor coverings - Laboratory soiling tests - Drum test) |
BS EN ISO 11380-1995 |
光学和光学仪器.眼科光学.模板 |
(Optics and optical instruments - Ophthalmic optics - Formers) |
BS EN ISO 11381-1995 |
光学和光学仪器.眼科光学.螺钉螺纹 |
(Optics and optical instruments - Ophthalmic optics - Screw threads) |
BS EN ISO 1140-2004 |
纤维绳索.聚酰胺.3、4和8股绞绳 |
|
BS EN ISO 11401-1998 |
塑料.酚醛树脂.用液体色谱法分离 |
(Plastics - Phenolic resins - Separation by liquid chromatography) |
BS EN ISO 11402-1998 |
塑料.缩聚树脂.游离甲醛的测定 |
(Plastics - Condensation resins - Determination of free formaldehyde) |
BS EN ISO 11403-1-2003 |
塑料.可比较多点数据的采集和表示.机械性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Mechanical properties) |
BS EN ISO 11403-2-2004 |
塑料.可比多点数据的采集和表示.第2部分:热性能和加工性能 |
|
BS EN ISO 11403-3-2001 |
塑料.可比多点数据的获取和表示.对特性的环境影响 |
(Plastics - Acquisition and presentation of comparable multipoint data - Environmental influences on properties) |
BS EN ISO 11409-1998 |
塑料.酚醛树脂.差式扫描量热法测定反应热和反应温度 |
(Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry) |
BS EN ISO 1141-2004 |
纤维绳索.聚酯.3、4和8股绞绳 |
|
BS EN ISO 11426-1999 |
金和金珠宝合金的测定.灰吹法(火试验法) |
(Determination of gold in gold jewellery alloys - Cupellation method (fire assay)) |
BS EN ISO 11431-2002 |
房屋建筑.粘结产品.测定暴露到热、水和人造光透过玻璃后密封胶的粘着/结合特性 |
(Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass) |
BS EN ISO 11432-1995 |
施工结构.密封.抗压性测定 |
(Building construction - Sealants - Determination of resistance to compression) |
BS EN ISO 11439-2000 |
储气瓶.用作机动车燃料的天然气的船上存储用高压储气瓶 |
(Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles) |
BS EN ISO 11442-1-1996 |
技术产品文献加工.计算机技术信息处理.第1部分:安全要求 |
(Technical product documentation - Handling of computer-based technical information - Security requirements) |
BS EN ISO 11442-2-1996 |
技术产品文献加工.计算机技术信息处理.第2部分:原始文献 |
(Technical product documentation - Handling of computer-based technical information - Original documentation) |
BS EN ISO 11442-3-1996 |
技术产品文献加工.计算机技术信息处理.第3部分:产品设计过程的阶段 |
(Technical product documentation - Handling of computer-based technical information - Phases in the product design process) |
BS EN ISO 11442-4-1996 |
技术产品文献加工.计算机技术信息处理.第4部分:文献管理和检索系统 |
(Technical product documentation - Handling of computer-based technical information - Document management and retrieval systems) |
BS EN ISO 11446-2002 |
客车和具有12伏电压系统的轻型商用车.在牵引车和挂车之间的13杆连接器.尺寸和触点定位 |
(Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation) |
BS EN ISO 11446-2004 |
道路车辆.牵引车和挂车的电气连接用连接器.标称电源电压为12V的车辆用13极连接器 |
|
BS EN ISO 11469-2000 |
塑料.塑料产品的通用识别方法和标记 |
(Plastics - Generic identification and marking of plastics products) |
BS EN ISO 11489-1995 |
铂珠宝合金中铂的测定.氯化汞(I)还原后的重量法 |
(Determination of platinum in platinum jewellery alloys - Gravimetric method after reduction with mercury(I) chloride) |
BS EN ISO 11490-1995 |
钯珠宝合金中钯的测定.二甲基乙二肟重量法 |
(Determination of palladium in palladium jewellery alloys - Gravimetric method with dimethyl glyoxime) |
BS EN ISO 11539-1999 |
眼科光学.接触镜片.分类和接触镜片材料 |
(Ophthalmic optics - Contact lenses - Classification and contact lens materials) |
BS EN ISO 11541-1997 |
天然气.高压下含水量的测定 |
(Natural gas - Determination of water content at high pressure) |
BS EN ISO 11542-1-2001 |
塑料.超高分子量聚乙烯模塑和挤塑材料.名称与符号系统和基本规范 |
(Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Designation system and basis for specifications) |
BS EN ISO 11542-2-1999 |
塑料.超高分子量聚乙烯模塑和挤制材料.试样制备和性能测定 |
(Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Preparation of test specimens and determination of properties) |
BS EN ISO 11545-2001 |
农业灌溉设备.有喷头或喷雾咀的横向移动排灌机械和中心轴.水分配均匀性的测定 |
(Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution) |
BS EN ISO 11546-1-1996 |
声学.密封罩隔声性能的测定.第1部分:申报用实验室条件下的测量 |
(Acoustics - Determination of sound insulation performances of enclosures - Measurements under laboratory conditions (for declaration purposes)) |
BS EN ISO 11546-2-1996 |
声学.密封罩隔声性能的测定.第2部分:现场测定(验收和鉴定用) |
(Acoustics - Determination of sound insulation performances of enclosures - Measurements in situ (for acceptance and verification purposes)) |
BS EN ISO 11547-1996 |
小船.负载下起动前的保护 |
(Small craft - Start-in-gear protection) |
BS EN ISO 11551-2004 |
光学和光学仪器.激光和激光设备 |
|
BS EN ISO 11551-2004 |
光学和光学仪器.激光和激光设备.光学激光组件光吸收性试验方法 |
|
BS EN ISO 11551-2004 |
光学和光学仪器.激光器和有关的激光设备 |
|
BS EN ISO 11553-1-2005 |
机械安全.激光加工机械.一般安全要求 |
|
BS EN ISO 11553-1-2005 |
机械安全.激光加工机械.一般安全要求 |
|
BS EN ISO 11554-2003 |
光学和光学仪器.激光和激光相关设备.激光束功率、能量和暂时性特征的试验方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics) |
BS EN ISO 11562-1997 |
几何制品规范(GPS).表面特征:轮廓法.相位校正过滤器的计量特征 |
(Geometric product specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters) |
BS EN ISO 1158-1998 |
塑料.氯乙烯均聚物和共聚物.氯含量的测定 |
(Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content) |
BS EN ISO 11591-2001 |
小型飞机.引擎驱动.由舵位置的视觉范围 |
(Small craft, engine driven - Field of vision from helm position) |
BS EN ISO 11592-2001 |
小于8米长外壳的小艇.最大推动力测定 |
(Small craft less than 8 m length of hull - Determination of maximum propulsion power rating) |
BS EN ISO 11593-1998 |
工业操作机器人.自动终端操纵交换系统.特性描述的词汇和说明 |
(Manipulating industrial robots - Automatic end effector systems - Vocabulary and presentation of characteristics) |
BS EN ISO 11600-2003 |
房屋建筑.连接产品.密封胶的分类和要求 |
(Building construction - Jointing products - Classification and requirements for sealants) |
BS EN ISO 11606-2001 |
船舶和航海技术.航海用电磁罗盘 |
(Ships and marine technology - Marine electromagnetic compasses) |
BS EN ISO 11608-1-2001 |
医用笔式注射枪.笔式注射器.要求和试验方法 |
(Pen-injectors for medical use - Pen-injectors - Requirements and test methods) |
BS EN ISO 11608-2-2001 |
医用笔式注射枪.针.要求和试验方法 |
(Pen-injectors for medical use - Needles - Requirements and test methods) |
BS EN ISO 11608-3-2001 |
医用笔式注射枪.盒.要求和试验方法 |
(Pen-injectors for medical use - Finished cartridges - Requirements and test methods) |
BS EN ISO 11609-1996 |
牙科医学.牙膏.要求、试验方法和作标记 |
(Dentistry - Toothpastes - Requirements, test methods and marking) |
BS EN ISO 11623-2002 |
可运输气瓶.组合气瓶的周期检测和试验 |
(Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders) |
BS EN ISO 11640-1998 |
皮革.色牢度试验.耐周期性往复磨擦色牢度 |
(Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing) |
BS EN ISO 11641-2003 |
皮革.色牢度试验.耐汗渍的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to perspiration) |
BS EN ISO 11642-1998 |
皮革的色牢度试验.耐水洗的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to water) |
BS EN ISO 11643-1998 |
皮革.色牢度试验.小样品耐干洗溶剂色牢度 |
(Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions) |
BS EN ISO 11644-2003 |
皮革.涂层粘着牢度测定方法 |
(Leather - Test for adhesion of finish) |
BS EN ISO 11646-1998 |
皮革.面积测量 |
(Leather - Measurement of area) |
BS EN ISO 11654-1997 |
声学.建筑物用声音吸收装置.吸声率 |
(Acoustics - Sound absorbers for use in buildings - Rating of sound absorption) |
BS EN ISO 11670-2003 |
激光和激光相关设备.激光束参数的试验方法.束定位稳定性 |
(Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability) |
BS EN ISO 11674-2001 |
船舶和造船技术.航向控制系统 |
(Ships and marine technology - Heading control systems) |
BS EN ISO 11680-1-2001 |
林业机械.电极驱动的修枝剪刀的安全要求和试验.带有内燃机的装置 |
(Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Units fitted with an integral combustion engine) |
BS EN ISO 11680-2-2001 |
林业机械.电极驱动的修枝剪刀的安全要求和试验.与背负式电源一起使用的装置 |
(Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Units for use with a back-pack power source) |
BS EN ISO 11681-1-2004 |
林业机械.便携式链锯的安全要求和试验.林业专用链锯 |
|
BS EN ISO 11681-1-2004 |
林业机械.便携式链锯的安全要求和试验.林业专用链锯 |
|
BS EN ISO 11681-2-1998 |
林业机械.便携式链锯.安全要求和试验.第2部分:树木砍伐用链锯 |
(Machinery for forestry - Portable chainsaws - Safety requirements and testing - Chainsaws for tree service) |
BS EN ISO 11683-1997 |
包装.触摸危险警告的要求 |
(Packaging - Tactile warnings of danger - Requirements) |
BS EN ISO 11688-1-1998 |
声学.低噪音机械和设备的设计和推荐规程.第1部分:计划 |
(Acoustics - Recommended practice for the design of low-noise machinery and equipment - Planning) |
BS EN ISO 11689-1997 |
声学.机械设备释放噪声数据的比较方法 |
(Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment) |
BS EN ISO 11690-1-1997 |
声学.低噪声工作室容纳机械装置的设计用推荐实用规程.第1部分:噪声控制战略 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Noise control strategies) |
BS EN ISO 11690-2-1997 |
声学.低噪声工作室容纳机械装置的设计用推荐实用规程.第2部分:噪声控制测量 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Noise control measures) |
BS EN ISO 11690-3-1999 |
声学.低噪音车间(含机械噪音)设计的推荐实用规程.工作室中噪音降低和声音的传播 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Sound propagation and noise prediction in workrooms) |
BS EN ISO 11691-1997 |
声学.插入式不变形管消声器的损耗测量.实验室调查法 |
Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method |
BS EN ISO 11715-1-1998 |
眼科光学.眼镜镜片成形数据传输用数字数据文件的格式.双尺寸跟踪程序 |
(Ophthalmic optics - Format of digital data files for data transfer for profiling of spectacle lenses - Two-dimensional tracers) |
BS EN ISO 11721-1-2001 |
纺织品.含纤维素的织物对微生物耐性的测定.土壤掩埋的试验.腐蚀阻滞完成的评价 |
(Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Assessment of rot-retardant finishing) |
BS EN ISO 11721-2-2003 |
纺织品.纤维素纺织品抗菌性的测定.土埋试验.防腐处理长期有效性的鉴定 |
(Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Identification of long-term resistance of a rot retardant finish) |
BS EN ISO 11732-1997 |
水质.用水流分析和光谱检测法测定氨氮 |
(Water quality - Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection) |
BS EN ISO 11732-2005 |
水质.氨氮的测定.流动分析(CFA和FIA)和光谱测定法 |
|
BS EN ISO 11733-1996 |
水质.水介质中有机化合物的清除和生物降解能力的评定.活性污泥的模拟试验 |
(Water quality - Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test) |
BS EN ISO 11733-2005 |
水质.水介质中有机化合物的去除率和生物降解能力测定.活性污泥模拟试验 |
|
BS EN ISO 11734-1996 |
水质.消化污泥中有机化合物的’最终’厌氧生物降解能力评定.生物气体产生的测量方法 |
(Water quality - Evaluation of the ’ultimate’ anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production) |
BS EN ISO 11737-2-2000 |
医疗器械的消毒.微生物法.灭菌证实过程的无菌检验 |
(Sterilization of medical devices - Microbiological methods - Tests of sterility performed in the validation of a sterilization process) |
BS EN ISO 11758-1996 |
橡胶和塑料软管.暴露在氙弧灯下的试验.颜色和外观变化的测定 |
(Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance) |
BS EN ISO 11806-1997 |
农林机械.内燃机驱动的轻型手持灌木铲除机和草地割草机.安全 |
(Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety) |
BS EN ISO 11807-1-2005 |
集成光学.词汇.基本术语和符号 |
|
BS EN ISO 11807-2-2005 |
集成光学.词汇.分类用术语 |
|
BS EN ISO 1181-2004 |
纤维绳索.马尼拉麻和剑麻.3、4和8股绞绳 |
|
BS EN ISO 11810-2002 |
光学和光学仪器.激光器和有关激光设备.手术用帘和/或病人防护苫布耐激光强度的试验方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient-protective covers) |
BS EN ISO 11812-2002 |
小艇.不渗水座舱和快速排干座舱 |
(Small craft - Watertight cockpits and quick-draining cockpits) |
BS EN ISO 11816-1-2000 |
牛奶和奶制品.荧光计法测定碱性磷酸酶的活性.牛奶和牛奶饮料 |
(Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Milk and milk based drinks) |
BS EN ISO 11816-2-2003 |
牛奶和奶制品.用荧光计法测定碱性磷酸酶的活性.乳酪的荧光计法 |
(Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Fluorometric method for cheese) |
BS EN ISO 11819-1-2000 |
声学.路面对交通噪声影响力的测量.旁路统计法 |
(Acoustics - Measurement of the influence of road surfaces on traffic noise - Statistical pass-by method) |
BS EN ISO 1182-2002 |
建筑产品耐火反应试验.不可燃性试验 |
(Reaction to fire tests for building products - Non-combustibility test) |