标准号 |
中文名称 |
英文名称 |
BS 4999-145-1987 |
旋转电机的一般要求.第145部分:绕组出线端规范 |
(General requirements for rotating electrical machines - Specification for winding terminations) |
BS 4999-147-1988 |
旋转电机的一般要求.电机电刷及刷握的尺寸规范 |
(General requirements for rotating electrical machines - Specification for dimensions of brushes and brush-holders for electrical machinery) |
BS 4A 100-2003 |
抗拉强度不超过1249MPa的螺栓和空转螺母的一般要求规范 |
(Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1 249 MPa) |
BS 4A 102-2002 |
航空器用钢制螺栓(统一六角形和统一螺纹) |
(Specification for steel bolts (Unified hexagons and Unified threads) for aircraft) |
BS 4A 104-2002 |
航空器用耐腐蚀钢制螺栓(统一六角形和统一螺纹) |
(Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads) for aircraft) |
BS 4A 111-1993 |
有紧公差柄的镀隔钢螺栓规范(统一六角形和统一螺纹) |
(Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks) |
BS 4A 112-1992 |
镀隔钢保险螺栓规范(统一六角形和统一螺纹) |
(Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads)) |
BS 4A 113-1999 |
镀镉的蘑菇状头统一螺纹,狭孔传动.,螺栓规范 |
(Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive, bolts) |
BS 4A 114-1999 |
耐腐蚀钢制蘑菇头开槽螺栓规范(强度等级880/1080) |
(Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts (strength class 880/1080)) |
BS 4A 169-2002 |
航空器用铝合金螺栓(统一六角形和统一螺纹) |
(Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft) |
BS 4A 170-1999 |
带槽的蘑菇头铝合金螺栓的规格 |
(Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread)) |
BS 4A 228-1997 |
飞行器用1250MPa |
(180,000lbf/in(Specification for steel double hexagon bolts - 1250 MPa (180,000 lbf/inUP2) for aircraft) |
BS 4A 4-1.2-1967 |
金属材料试样和试验方法规范.第1部分:抗拉试验.第2节:高温下的抗拉试验.米制单位 |
(Specification for test pieces and test methods for metallic materials - Tensile tests - Tensile tests - elevated temperature - Metric units) |
BS 4A 4-1.3-1967 |
金属材料试样和试验方法规范.第1部分:抗拉试验.第3节:不间断蠕变试验和蠕变断裂试验.米制单位 |
(Specification for test pieces and test methods for metallic materials - Tensile tests - Uninterrupted creep and rupture tests - Metric units) |
BS 4A 4-1966 |
飞行器用金属材料试样和试验方法规范.米制单位 |
(Test pieces and test methods for metallic materials for aircraft - Metric units) |
BS 4C 14-1991 |
飞行器用压力加注燃料连接器规范 |
(Specification for aircraft pressure refuelling connectors) |
BS 4F 111-2002 |
航天航空用亚麻网状带 |
(Flax harness webbing for aerospace purposes) |
BS 4F 119-2002 |
145g/m |
(145 g/mUP2 to 235 g/mUP2 nylon parachute fabric) |
BS 4F 123-1996 |
航空航天用机织尼龙带织物(标称235分特纱)规范 |
(Woven nylon narrow fabrics for aerospace purposes (nominally 235 dtex yarns)) |
BS 4F 124-1996 |
航空用机织6.6窄幅尼龙织物规范(额定值为940支纱) |
(Specification for woven nylon 6.6 narrow fabrics for aerospace purposes (nominally 940 dtex yarns)) |
BS 4F 33-1961 |
航空用棉线软绳索规范 |
(Specification for flexible cotton rope for aeronautical purposes) |
BS 4F 57-1990 |
航空航天用充气设备的擦净棉织物规范 |
(Specification for scoured cotton fabric for inflatable equipment for aerospace purposes) |
BS 4F 68-2002 |
航空航天设备用硫化橡胶的控制储存 |
(Controlled storage of vulcanized rubbers for use in aerospace applications) |
BS 4G 173-1-1985 |
飞机用地面供电连接器.第1部分:设计、性能和试验要求规范 |
(Connectors for ground electrical supplies for aircraft - Specification for design, performance and test requirements) |
BS 4G 173-2-1985 |
飞机用地面供电连接器.第2部分:尺寸规范 |
(Connectors for ground electrical supplies for aircraft - Specification for dimensions) |
BS 4G 178-2-1986 |
航空用电缆电线的压接头.第2部分:压接检验规范(包括用户检验试验) |
(Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests)) |
BS 4G 198-1-1997 |
飞机电器电缆和设备导线用套管.连接和识别用橡胶套管的规范 |
(Sleeves for aircraft electric cables and equipment wires - Specification for elastomeric sleeves for binding and identification) |
BS 4G 198-3-1999 |
飞行器电缆和设备导线用套管和模制件.连接、绝缘和识别用热收缩套管的规范 |
(Sleeves and moulded components for aircraft electric cables and equipment wires - Specification for heat-shrinkable sleeving for binding, insulation, and identification) |
BS 4G 229-1996 |
空运设备的环境条件和试验规程一览表 |
(Schedule for environmental conditions and test procedures for airborne equipment) |
BS 4J 10-1991 |
耐水压敏PVC胶粘带规范 |
(Specification for pressure-sensitive adhesive water resistant PVC tape) |
BS 4J 11-1991 |
压敏胶粘纸带规范 |
(Specification for pressure-sensitive adhesive paper masking tape) |
BS 4K 6-1928 |
飞机材料规格.铸铁活塞环槽(砂型铸铁和冷铸铁) |
(Specification for aircraft material - Cast iron piston ring pots (sand cast and chill cast)) |
BS 4L 100-1993 |
锻铝和铝合金的检验、试验和验收程序 |
(Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys) |
BS 4L 101-1990 |
铝基和镁基铸锭和铸件的检验.试验和验收规程 |
(Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings) |
BS 4L 54-1986 |
99%铝管规范(冷拔:无缝:经过液压试验)(壁厚不超过12mm) |
(Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness)) |
BS 4L 56-1986 |
铝-2%镁合金管规范(强度符号-O)(无缝管:水力试验)(不超过12mm壁厚) |
Specification for tube of aluminium-2% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness) |
BS 4L 59-1985 |
铝镁合金薄板材和带材规范(回火号为H16或H2) |
(Specification for sheet and strip of aluminium-manganese alloy (temper designation H16 or H26)) |
BS 4L 60-1985 |
铝镁合金薄板材和带材规范(回火号为H12或H22) |
(Specification for sheet and strip of aluminium-manganese alloy (temper designation H12 or H22)) |
BS 4L 61-1985 |
铝镁合金薄板材和带材规范(回火号为0) |
(Specification for sheet and strip of aluminium-manganese alloy (temper designation-O)) |
BS 4M 45-1-1998 |
飞行器轮胎和轮辋.规范 |
(Aircraft tyres and rims - Specifications) |
BS 4N 100-1-1999 |
飞行器供氧系统和设备.设计和安装 |
(Aircraft oxygen systems and equipment - Design and installation) |
BS 4N 100-2-1999 |
飞行器供氧系统和设备.在有氧情况下材料兼容性的试验 |
(Aircraft oxygen systems and equipment - Tests for the compatibility of materials in the presence of oxygen) |
BS 4N 100-3-1999 |
飞行器供氧系统和设备.设备和系统的试验 |
Aircraft oxygen systems and equipment - Testing of equipment and systems |
BS 4N 100-4-1999 |
飞行器供氧系统和设备.生理因素指南 |
(Aircraft oxygen systems and equipment - Guide to the physiological factors) |
BS 4N 100-5-1999 |
飞行器供氧系统和设备.与氧有关的火灾和爆炸指南 |
(Aircraft oxygen systems and equipment - Guide to fire and explosion hazards associated with oxygen) |
BS 4N 100-6-1999 |
飞行器供氧系统和设备.选择与氧一起使用的材料的指南和推荐方法 |
(Aircraft oxygen systems and equipment - Guidance and recommendations on the selection of materials for use with oxygen) |
BS 4S 106-1976 |
含3%铬钼钢方坯、棒材、锻件及零件的规范(930-1080MPa;限定等圆断面150mm)(适用于氮化) |
(Specification - 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (suitable for nitriding)) |
BS 4S 14-1964 |
航空材料规范.表面硬化碳钢 |
(Specification for aircraft material - Carbon case-hardening steel) |
BS 4S 28-1964 |
航空材料规范.4%镍铬钼钢.(空冷淬硬)(100吨力/平方英寸:限定等圆断面2) |
(Specification for aircraft material - 4 per cent nickel-chromium-molybdenum steel (air hardening) (100 tonf/sq in: limiting ruling section 2) |
BS 4T 100-1997 |
无缝钢管和管材的检验、试验和验收程序 |
(Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock) |
BS 4T 45-1972 |
碳-锰钢管规格(700 N/mm) |
(Specification for carbon-manganese steel tube (700 N/mmUP2) (tube 12.5 mm outside diameter and greater) (weldable)) |
BS 500-2000 |
钢轨枕 |
(Steel sleepers) |
BS 5000 Index-1981 |
特种或专用旋转电机一般介绍及索引 |
(Specification for rotating electrical machines of particular types or for particular applications - General introduction and index) |
BS 5000-11-1973 |
特种或专用旋转电机.第11部分:小功率电动机和发电机 |
(Specification for rotating electrical machines of particular types or for particular applications - Small-power electric motors and generators) |
BS 5000-15-1980 |
特种或专用旋转电机.防护E型电机(增安型) |
(Rotating electrical machines of particular types or for particular applications - Machines with type of protection ’e’ (increased safety)) |
BS 5000-16-1997 |
特种或专用旋转电机.防护“N“型旋转电机 |
(Rotating electrical machines of particular types or for particular applications - Rotating electrical machines with type of protection ’N’) |
BS 5000-17-1981 |
特种或专用旋转电机.具有防火罩的电机 |
(Rotating electrical machines of particular types or for particular applications - Machines with flameproof enclosure) |
BS 5000-3-1980 |
特种或专用旋转电机.第3部分:由往复式内燃机驱动的发电机 |
(Specification for rotating electrical machines of particular types or for particular applications - Generators to be driven by reciprocating internal combustion engines) |
BS 5000-50-1982 |
特种或专用旋转电机.第50部分:燃油器电动机的尺寸 |
(Specification for rotating electrical machines of particular types or for particular applications - Dimensions for oil burner motors) |
BS 5041-1-1987 |
消防栓系统设备.第1部分:湿式水嘴用接地阀规范 |
(Fire hydrant systems equipment - Specification for landing valves for wet risers) |
BS 5041-2-1987 |
消防栓系统设备.第2部分:干式水嘴用接地阀规范 |
(Fire hydrant systems equipment - Specification for landing valves for dry risers) |
BS 5041-3-1975 |
消防栓系统设备.第3部分:干式水进口用进水支管规范 |
(Fire hydrant systems equipment - Specification for inlet breechings for dry riser inlets) |
BS 5041-4-1975 |
消防栓系统设备.第4部分:干式水嘴用接地阀箱规范 |
(Fire hydrant systems equipment - Specification for boxes for landing valves for dry risers) |
BS 5041-5-1974 |
消防栓系统设备.第5部分:泡沫入口及干式水嘴用箱规范 |
(Fire hydrant systems equipment - Specification for boxes for foam inlets and dry riser inlets) |
BS 5045-7-2000 |
可运输的气体容器.特殊便携式应用的水容量为0.5-15升的无缝钢气体容器的规范 |
(Transportable gas containers - Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications) |
BS 5045-8-2000 |
可运输的气瓶.特殊便携式在15℃时最高达300巴承受压力的水容量为0.5L-15L的无缝铝合金气瓶规范 |
(Transportable gas containers - Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15 鳦 for special portable application) |
BS 5046-1974 |
钢的热处理中等效直径的估算方法 |
(Method for the estimation of equivalent diameters in the heat treatment of steel) |
BS 5047-1997 |
溶液聚合型聚丁橡胶浆的评定方法 |
(Method for evaluation of solution-polymerized types of butadiene rubber (BR)) |
BS 5049-1-1994 |
架空电力线和高压设备的无线电干扰特性.现象说明 |
(Radio interference characteristics of overhead power lines and high-voltage equipment - Description of phenomena) |
BS 5049-2-1994 |
架空线和高压电器的无线电干扰特性.极限值的测定程序和方法 |
(Radio interference characteristics of overhead power lines and high-voltage equipment - Methods of measurement and procedure for determining limits) |
BS 5049-3-1994 |
架高线和高压电器的无线电干扰特性.减小无线电噪声的操作规程 |
(Radio interference characteristics of overhead power lines and high-voltage equipment - Code of practice for minimizing the generation of radio noise) |
BS 5050-1974 |
冰晶石的试验方法 |
(Methods of test for cryolite) |
BS 5050-8-1980 |
冰晶石的试验方法.第8部分:钙含量的测定 |
(Methods of test for cryolite - Determination of calcium content) |
BS 5057-1992 |
扁平快速接线端子规范 |
(Specification for flat, quick-connect terminations) |
BS 5058-1973 |
织物悬垂性的评定方法 |
(Method for the assessment of drape of fabrics) |
BS 506-1-1987 |
工业用甲醇.第1部分:甲醇规范 |
(Methanol for industrial use - Specification for methanol) |
BS 506-2-1984 |
工业用甲醇.第2部分:试验方法 |
(Methanol for industrial use - Methods of test) |
BS 5060-1987 |
回风电扇其调节器的性能和结构规范 |
(Specification for performance and construction of electric circulating fans and regulators) |
BS 5061-1974 |
圆柱形青饲料塔贮规范及其使用推荐方法 |
Specification for cylindrical forage tower silos and recommendations for their use |
BS 5066-1974 |
织物耐人工喷淋试验方法 |
(Method of test for the resistance of fabrics to an artificial shower) |
BS 5067-1985 |
矿用防火变压器规范 |
(Specification for flameproof transformers for use in mines) |
BS 507-1985 |
工业用乙醇规范 |
(Specification for ethanol for industrial use) |
BS 5070-3-1988 |
工程图实用绘制方法.第3部分:机械/流体流程图推荐绘制方法 |
(Engineering diagram drawing practice - Recommendations for mechanical/fluid flow diagrams) |
BS 5070-4-1990 |
工程图实用绘制方法.第4部分:逻辑框图推荐绘制方法 |
(Engineering diagram drawing practice - Recommendations for logic diagrams) |
BS 5072-1-1974 |
工业用氟化钠的试验方法.第1部分:水不溶物的测定 |
(Methods of test for sodium fluoride for industrial use - Determination of water-insoluble matter) |
BS 5072-2-1974 |
工业用氟化钠的试验方法.第2部分:水含量的测定 |
(Methods of test for sodium fluoride for industrial use - Determination of moisture content) |
BS 5072-3-1975 |
工业用氟化钠的试验方法.第3部分:氟含量的测定 |
(Methods of test for sodium fluoride for industrial use - Determination of fluorine content) |
BS 5072-4-1980 |
工业用氟化钠的试验方法.第4部分:试样的制备与贮存 |
(Methods of test for sodium fluoride for industrial use - Preparation and storage of test samples) |
BS 5072-5-1980 |
工业用氟化钠的试验方法.第5部分:铁含量的测定 |
(Methods of test for sodium fluoride for industrial use - Determination of iron content) |
BS 5072-6-1980 |
工业用氟化钠的试验方法.第6部分:二氧化硅含量的测定 |
(Methods of test for sodium fluoride for industrial use - Determination of silica content) |
BS 5072-7-1980 |
工业用氟化钠的试验方法.第7部分:可溶性硫酸盐含量的测定 |
(Methods of test for sodium fluoride for industrial use - Determination of soluble sulphates content) |
BS 5072-8-1980 |
工业用氟化钠的试验方法.第8部分:氢化物含量的测定 |
(Methods of test for sodium fluoride for industrial use - Determination of chlorides content) |
BS 5072-9-1980 |
工业用氟化钠的试验方法.第9部分:碳酸盐含量的测定 |
(Methods of test for sodium fluoride for industrial use - Determination of carbonate content) |
BS 5073-1982 |
货物在运输集装箱中的贮存指南 |
(Guide to stowage of goods in freight containers) |
BS 5074-1974 |
精密测量用各种长短杆式温度计规范 |
(Specification for short and long solid-stem thermometers for precision use) |
BS 5076-1974 |
医院用瓶装液体储柜(电热型)规范 |
(Specification for hospital storage cabinets for bottled fluids (electrically heated)) |
BS 5077-1974 |
同BS 4507规定的润滑脂筒配合使用的润滑脂枪(手动操作杆型)规范 |
(Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507) |
BS 5078-1974 |
钻模及夹具部件 |
(Specification for jig and fixture components) |
BS 5079-1981 |
记录密度为4C/mm(100C/in)、相位编码密度为63ft/mm(1600ft/in)、宽3.81mm(0.150in)的盒式磁带信息交换规范 |
(Specification for information interchange on 3.81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1600 ftpi)) |
BS 508-1-1986 |
工业用丁醇.第1部分:丁醇-1规范 |
(Butan-1-ol for industrial use - Specification for butan-1-ol) |
BS 508-2-1984 |
工业用丁醇.第2部分:试验方法 |
(Butan-1-ol for industrial use - Methods of test) |
BS 5080-1-1993 |
混凝土和砖石工程中的结构附件.第1部分:抗拉负荷的试验方法 |
(Structural fixings in concrete and masonry - Method of test for tensile loading) |
BS 5080-2-1986 |
混凝土和砖石工程中结构附件的试验方法.抗剪荷载的测定方法 |
(Structural fixings in concrete and masonry - Method for determination of resistance to loading in shear) |
BS 5086-1-1984 |
黄油分析.第1部分:包括试样制备的一般介绍 |
(Analysis of butter - General introduction including preparation of samples) |
BS 5086-3-1984 |
黄油分析.第3部分:水含量的测定方法(常规法) |
(Analysis of butter - Method for determination of water content (routine method)) |
BS 5086-4-1985 |
黄油分析.第4部分:盐含量的测定方法(参考法) |
(Analysis of butter - Method for determination of salt content (reference method)) |
BS 5086-5-1998 |
黄油的分析.盐含量的测定方法 |
(Analysis of butter - Method for determination of salt content) |
BS 5086-6-1992 |
黄油分析.第6部分:黄油和牛奶脂肪制品脂肪中脂肪酸度和游离脂肪酸的测定方法(参照法) |
(Analysis of butter - Method for determination of fat acidity and free fatty acids in the fat of butter and milk fat products (Reference method)) |
BS 5086-7-1991 |
黄油分析.第7部分:黄油pH值测定方法 |
(Analysis of butter - Method for determination of pH of butter serum) |
BS 509-1-1987 |
工业用丙酮.第1部分:丙酮规范 |
(Acetone for industrial use - Specification for acetone) |
BS 509-2-1984 |
工业用丙酮.第2部分:试验方法 |
(Acetone for industrial use - Methods of test) |
BS 5097-1-1974 |
活页夹规范.第1部分:带金属机构的活页夹 |
(Specification for loose leaf binders - Ring binders with metal mechanisms) |
BS 5098-1992 |
食品感观分析的术语汇编 |
Glossary of terms relating to sensory analysis |
BS 5099-2004 |
电缆.火花试验电压级 |
|
BS 5099-2004 |
电缆.火花试验电压级 |
|
BS 5101-4-1980 |
带控制互换性和安全性量规的灯头和灯座规范.第1、2或第3部分中未作规定的英国用灯头、灯座和量规 |
Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Lamp caps, lampholders and gauges used in the United Kingdom but not specified in Parts 1, 2 or 3 |
BS 5106-1989 |
螺旋抗挤压支承环及其壳体尺寸规范 |
Specification for dimensions of spiral anti-extrusion back-up rings and their housings |
BS 5109-1974 |
光学器件和系统性能评定用术语词汇 |
Glossary of terms used in assessing the performance of optical devices and systems |
BS 5114-1975 |
聚乙烯管用连结件和压制配件的性能要求规范 |
Specification for performance requirements for joints and compression fittings for use with polyethylene pipes |
BS 5116-1974 |
测定棉花平列纤维束断裂强度的试验方法 |
Method of test for determination of breaking tenacity of flat bundles of cotton fibres |