标准号 |
中文名称 |
英文名称 |
BS EN 168100-1995 |
电子器件质量评定协调体系.石英晶体器件的分规范.(性能验收) |
(Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (capability approval)) |
BS EN 168101-1990 |
电子件的质量保证协调体系.空白详细规范.石英晶体部件(性能认可) |
(Harmonized system of quality assessment for electronic components - Blank detail specification: quartz crystal units (capability approval)) |
BS EN 168200-1991 |
电子件质量评定协调系统.分规范:石英晶体部件(资格认证) |
(Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (qualification approval)) |
BS EN 168201-1996 |
电子器件的质量评估系统一致性.空白详细规范.石英晶体件(资格认可) |
Harmonized system of quality assessment for electronic components - Blank detail specification - Quartz crystal units - (Qualification approval) |
BS EN 169-2002 |
个人眼睛保护.在焊接和有关技术中用的滤色镜.透射率要求和推荐使用 |
Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
BS EN 170-1992 |
专用眼睛保护设备用紫外线滤色镜规范 |
Specification for ultraviolet filters used in personal eye-protection equipment |
BS EN 170-2003 |
眼睛防护.紫外线滤光镜.透射率要求及推荐的使用方法 |
(Personal eye-protection - Ultraviolet filters.Transmittance requirements and recommended use) |
BS EN 170000-1999 |
电子器件质量评估的协调系统.通用规范:波导型介质谐振器 |
Harmonized system of quality assessment for electronic components - Generic specification: waveguide type dielectric resonators |
BS EN 170100-2001 |
电子器件的质量评定协调系统.分规范:波导型介质谐振器 |
Harmonized system of quality assessment for electronic components - Sectional specification: Waveguide type dielectric resonators |
BS EN 170101-2001 |
电子器件质量评定协调体系.波导型介质谐振器.能力批准 |
Harmonized system of quality assessment for electronic components - Blank detail specification - Waveguide type dielectric resonators - Capability approval |
BS EN 1704-1997 |
塑料管道系统.热塑塑料阀.弯曲情况下温度循环后阀门完整性的试验方法 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending |
BS EN 1705-1997 |
塑料管道系统.热塑性阀门.经过外部吹炼后阀门完整性试验方法 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow |
BS EN 1706-1998 |
铝及铝合金.铸件.化学成分和机械性能 |
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
BS EN 1707-1997 |
注射器、针头和其它特定医疗器械用有6%(路厄)锥度的圆锥形配件.锁定配件 |
(Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings) |
BS EN 1708-1-1999 |
焊接.钢件基本焊接连接部件.受压组件 |
(Welding - Basic weld joint details in steel - Pressurized components) |
BS EN 1708-2-2000 |
焊接.钢焊接时的基本连接件.无内压的组件 |
(Welding - Basic weld joint details in steel - Non-internal pressurized components) |
BS EN 1709-2004 |
载人用索道装置的安全要求.试运行检查、维修、操作检查和检验 |
|
BS EN 1709-2004 |
载人用索道装置的安全要求.试运行检查、维修、操作检查和检验 |
|
BS EN 171-2002 |
个人眼睛保护.红外滤光镜.透射率要求和推荐使用 |
(Personal eye-protection - Infrared filters - Transmittance requirements and recommended use) |
BS EN 171000-2001 |
电子器件的质量评定协调系统.总规范.使用波导型介质谐振器的滤波器 |
(Harmonized system of quality assessment for electronic components - Generic specification - Filters using waveguide type dielectric resonators) |
BS EN 1711-2000 |
焊接的非损检验.通过综合平面分析对焊接的边缘电流检验 |
Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis |
BS EN 1712-1997 |
焊接的无损检验.焊点超声波检测.验收 |
(Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels) |
BS EN 1713-1998 |
焊缝的无损检验.超声检验.焊缝的表征 |
(Non-destructive examination of welds - Ultrasonic examination - Characterization of indications in welds) |
BS EN 1714-1998 |
焊点非损检验.焊点超声检验 |
(Non destructive examination of welded joints - Ultrasonic examination of welded joints) |
BS EN 1715-1-1998 |
铝和铝合金.绘图台.检验和交货技术条件及一般要求 |
(Aluminium and aluminium alloys - Drawing stock - General requirements and technical conditions for inspection and delivery) |
BS EN 1715-2-1998 |
铝和铝合金.绘图台.电子应用的特殊要求 |
(Aluminium and aluminium alloys - Drawing stock - Specific requirements for electrical applications) |
BS EN 1715-3-1998 |
铝和铝合金.绘图台.机械应用的特殊要求(包括焊接) |
(Aluminium and aluminium alloys - Drawing stock - Specific requirements for mechanical uses (excluding welding)) |
BS EN 1715-4-1998 |
铝和铝合金.绘图台.焊接应用的特殊要求 |
(Aluminium and aluminium alloys - Drawing stock - Specific requirements for welding applications) |
BS EN 1716-1997 |
塑料管道系统.聚乙烯(PE)开孔三通件.安装好的开孔三通上抗冲击应力的检测方法 |
(Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee) |
BS EN 1717-2001 |
防止水装置中饮用水污染以及防止回流污染的装置的一般要求 |
(Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow) |
BS EN 1718-1999 |
光传送带.运行光传送带产生的静电场的测量方法 |
(Light conveyor belts - Test method for the measurement of the electrostatic field generated by a running light conveyor belt) |
BS EN 1719-1999 |
纸和纸板胶粘剂.包装和一次性用卫生制品.压力敏感胶粘剂粘着力的测定.环行粘着力的测定 |
Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure-sensitive adhesives - Determination of loop tack |
BS EN 172-1995 |
工业用人眼保护装置中强光滤光镜规范 |
(Specification for sunglare filters used in personal eye-protectors for industrial use) |
BS EN 1720-1999 |
纸和纸板胶粘剂.包装和一次性用卫生制品.压力敏感胶粘剂粘着力的测定.分散性的测定 |
(Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability) |
BS EN 1721-1999 |
纸张和纸板、包装材料和一次性卫生产品用胶粘剂.压敏胶粘剂表面粘性的测量.滚球法测量表面粘性 |
(Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack) |
BS EN 1722-1999 |
轻型输送带.最大拉伸强度测定的试验方法 |
(Light conveyor belts - Test method for the determination of the maximum tensile strength) |
BS EN 1723-2000 |
轻型输送带.放松弹性模量测定的试验方法 |
(Light conveyor belts - Method of test for the determination of the relaxed elastic modulus) |
BS EN 1724-1999 |
光输送带.摩擦系数测定的试验方法 |
(Light conveyor belts - Test method for the determination of the coefficient of friction) |
BS EN 1725-1998 |
家具.床和床垫.安全要求和试验方法 |
(Domestic furniture - Beds and mattresses - Safety requirements and test methods) |
BS EN 1726-1-1999 |
工业货车的安全.荷载能力至10000Kg的自行货车和拉杆拉力至20000N的工业牵引车.一般要求 |
(Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. General requirements) |
BS EN 1726-2-2000 |
工业货车的安全.荷载能力至10000Kg的自行货车和拉杆拉力至20000N的工业牵引车.带高架驾驶位的货车和专为超 |
() |
BS EN 1727-1998 |
家具.储藏家具.安全要求和试验方法 |
(Domestic furniture - Storage furniture - Safety requirements and test methods) |
BS EN 1728-2001 |
家用家具.座椅.测定强度和耐久性的试验方法 |
(Domestic furniture - Seating - Test methods for the determination of strength and durability) |
BS EN 1730-2000 |
家具.桌子.强度、耐久性和稳定性测定的试验方法 |
(Dometsic furniture - Tables - Test methods for determination of strength, durability and stability) |
BS EN 1731-1998 |
防止机械和/或热损害的工业和非工业护目镜和防护面罩网格类型 |
(Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat) |
BS EN 1733-2002 |
用于呼吸管道的吸引导管 |
Suction catheters for use in the respiratory tract |
BS EN 1734-1997 |
橡胶或塑料涂覆织物.耐水渗透性的测定.低压法 |
(Rubber- or plastics- coated fabrics - Determination of resistance to water penetration - Low-pressure method) |
BS EN 1735-1997 |
橡胶或塑料涂覆织物.挠性测定 |
(Rubber- or plastics- coated fabrics - Determination of flexibility) |
BS EN 1736-2000 |
制冷系统和热泵.柔性管件.振动隔绝器和膨胀节.要求,设计和安装 |
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation |
BS EN 1737-1998 |
高压蒸氧加气混凝土或开放结构轻集料混凝土预制件用加筋毡或框架焊缝剪切强度的测定 |
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
BS EN 1738-1998 |
高压蒸养加气混凝土制非荷载增强件的钢应力测定 |
Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete |
BS EN 1739-1998 |
带有开放结构的高压蒸氧加气混凝土或轻集料混凝土制合成组件之间的连接共面力剪切强度的测定 |
Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
BS EN 174-2001 |
个人的眼睛保护.向下滑雪用护目器 |
Personal eye-protection - Ski goggles for downhill skiing |
BS EN 1740-1998 |
优化纵向荷载(垂直分量)下高压蒸氧加气混凝土或开放结构轻集料混凝土加筋预制件的性能试验 |
Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) |
BS EN 1741-1998 |
开放结构的由压热通气混凝土或轻集料混凝土构成的预制纤维化合物之间接头的平板外力的剪切强度的测定 |
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
BS EN 1742-1998 |
高压蒸氧加气混凝土或开放结构轻集料混凝土制多层构件不同层之间剪切强度的测定 |
Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
BS EN 1744-1-1998 |
集料的化学性能试验.化学分析 |
Tests for chemical properties of aggregates - Chemical analysis |
BS EN 1744-3-2002 |
集料的化学特性测试.通过过滤集料制备洗提液 |
Tests for chemical properties of aggregates - Preparation of eluates by leaching of aggregates |
BS EN 1745-2002 |
砖石工程和砖石工程产品.测定设计热值的方法 |
Masonry and masonry products - Methods for determining design thermal values |
BS EN 1746-1999 |
机械安全.安全标准噪声条款的设计指南 |
(Safety of machinery - Guidance for the drafting of the noise clauses of safety standards) |
BS EN 1748-1-1-2004 |
建筑用玻璃.特种基础产品.硼硅酸盐玻璃.定义及一般物理和机械特性 |
|
BS EN 1748-1-1-2004 |
建筑用玻璃.特种基础产品.硼硅酸盐玻璃.定义及一般物理和机械特性 |
|
BS EN 1748-1-1-2004 |
建筑用玻璃.特种基础产品.硼硅酸盐玻璃.定义及一般物理和机械特性 |
|
BS EN 1748-1-1998 |
建筑玻璃.硼硅酸盐玻璃 |
Glass in building - Borosilicate glasses |
BS EN 1748-1-2-2004 |
建筑玻璃.特殊基本产品.硼硅酸盐玻璃.合格评价.产品标准 |
|
BS EN 1748-1-2-2004 |
建筑玻璃.特种基础产品.硼硅酸盐玻璃.合格评价.产品标准 |
|
BS EN 1748-1-2-2004 |
建筑玻璃.特种基础产品.硼硅酸盐玻璃.合格评价.产品标准 |
|
BS EN 1748-2-1-2004 |
建筑玻璃.特种基础产品.玻璃陶瓷.定义及一般物理和机械特性 |
|
BS EN 1748-2-1-2004 |
建筑用玻璃.特种基础产品.玻璃陶瓷.定义及一般物理和机械特性 |
|
BS EN 1748-2-1-2004 |
建筑玻璃.特种基础产品.玻璃陶瓷.定义及一般物理和机械特性 |
|
BS EN 1748-2-1-2004 |
建筑玻璃.特种基础产品.玻璃陶瓷.定义及一般物理和机械特性 |
|
BS EN 1748-2-1998 |
建筑玻璃.玻璃陶瓷 |
(Glass in building - Glass ceramics) |
BS EN 1748-2-2-2004 |
建筑玻璃.特殊基本产品.玻璃陶瓷.合格评价/产品标准 |
|
BS EN 1748-2-2-2004 |
建筑玻璃.特种基础产品.玻璃陶瓷.合格评价/产品标准 |
|
BS EN 1748-2-2-2004 |
建筑玻璃.特种基础产品.玻璃陶瓷.合格评价/产品标准 |
|
BS EN 175-1997 |
个人防护.焊接和类似加工中眼睛和面部的防护设备 |
(Personal protection - Equipment for eye and face protection during welding and allied processes) |
BS EN 1751-1999 |
建筑物通风.空气终端设备.减振器和阀的空气动力试验 |
(Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves) |
BS EN 175100-1993 |
电子器件质量评定协调体系.分规范.印制电路板用双件式侧边插接器 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Two part and edge socket connectors for printed board applications) |
BS EN 175101-802-2000 |
电子器件质量评估的协调系统.详细规范.带有3或4行上2.54mm基本格栅的高数值触点印制电路板用两件式连接器 |
(Harmonized system of quality assessment for electronic components - Detail specification - Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows) |
BS EN 175101-809-2000 |
电子器件质量评定协调体系.详细规范.经质量评定的符合CECC 75 101-801的带有短结构2.54mm格栅的印制电路 |
(Harmonized system of quality assessment for electronic components - Detail specification - Detail Specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compl) |
BS EN 175101-809-2004 |
电子器件质量评估的协调系统.详细规范.遵守CECC 75 101-801短版本经质量评定的有2.54mm格栅的印制电路板用两件式连接器 |
|
BS EN 175200-1997 |
电子器件质量评定协调体系.分规范:圆连接器 |
(Harmonized system of quality assessment for electronic components - Sectional specification: circular connectors) |
BS EN 175201-804-2000 |
电子器件质量评定协调系统.详细规范.环形连接器.螺纹接头直径1.6mm圆触点 |
(Harmonized system of quality assessment for electronic components - Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling) |
BS EN 1753-1997 |
镁和镁合金.镁合金铸模和铸件 |
(Magnesium and magnesium alloys - Magnesium alloy ingots and castings) |
BS EN 175300-1997 |
电子器件质量评定协调体系.分规范:频率3MHz以下的扁形连接器 |
(Harmonized system of quality assessment for electronic components - Sectional specification:rectangular connectors for frequencies below 3 MHz) |
BS EN 175301-801-2000 |
电子器件质量评估的协调系统.详细规范.带活动压接圆触点的高密度矩形连接器 |
(Harmonized system of quality assessment for electronic components - Detail specification - High density rectangular connectors, round removable crimp contacts) |
BS EN 175301-803-2000 |
电子器件质量评估的协调系统.详细规范.矩形连接器.带不可拆卸锁定螺钉的厚度为0.8mm的平触点 |
(Harmonized system of quality assessment for electronic components - Detail specification - Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable) |
BS EN 1754-1997 |
镁和镁合金.镁和镁合金阳极、铸锭、铸件和设计系统 |
(Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system) |
BS EN 1755-2000 |
工业用卡车的安全.在潜在爆炸气体环境下的操作.在可燃气体,蒸气,潮湿和灰尘下使用 |
(Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust) |
BS EN 175500-1997 |
电子器件质量评定协调体系.分规范:包括资格认可和能力认可的连接器用辅助输出电缆 |
(Harmonized system of quality assessment for electronic components - Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval) |
BS EN 1756-1-2002 |
尾部提升机.轮式运载工具上安装的平台提升机.安全要求.运货用尾部提升机 |
(Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Tail lifts for goods) |
BS EN 1756-2-2004 |
尾部提升机.轮式运载工具上安装的平台提升机.安全要求.客用尾部提升机 |
|
BS EN 1757-1-2001 |
工业货车安全.脚踏货车.叉车 |
(Safety of industrial trucks - Pedestrian propelled trucks - Stacker trucks) |
BS EN 1757-2-2001 |
工业货车安全.脚踏货车.托盘货车 |
(Safety of industrial trucks - Pedestrian propelled trucks - Pallet trucks) |
BS EN 1757-3-2002 |
工业货车安全.脚踏货车.平板车 |
(Safety of industrial trucks - Pedestrian propelled trucks - Platform trucks) |
BS EN 1757-4-2003 |
工业货车安全.脚踏货车.杠杆式升降机货盘式货车 |
(Safety of industrial trucks - Pedestrian propelled trucks - Scissor lift pallet-trucks) |
BS EN 1758-1998 |
铜及铜合金.以铅为框架的带材 |
(Copper and copper alloys - Strip for lead frames) |
BS EN 1759-1-2004 |
法兰及其连接件.等级标示的管、阀门、配件和附件用环形法兰.NPS 1/2到24 钢法兰 |
|
BS EN 1759-1-2004 |
法兰及其连接件.等级标示的管、阀门、配件和附件用环形法兰.NPS 1/2到24 钢法兰 |
|
BS EN 1759-3-2004 |
法兰及其连接件.标注等级的管道、阀门、配件和附件用圆形法兰.铜合金法兰 |
|
BS EN 1759-4-2003 |
法兰及其连接.管、阀、配件及附件用圆形法兰(指定等级的).铝合金法兰 |
(Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges) |
BS EN 1760-1-1998 |
机械安全.压力敏感防护装置.压力敏感垫和压力敏感楼板的设计和试验通用规则 |
(Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive mats and pressure sensitive floors) |
BS EN 1760-2-2001 |
机械安全.压力敏感防护装置.压力敏感垫和压力敏感楼板的设计和试验通用规则 |
(Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive edges and pressure sensitive bars) |
BS EN 1760-3-2004 |
机械安全.压敏防护装置.压敏减震器、板材、线材和类似设备的设计和试验通用规则 |
|
BS EN 1760-3-2004 |
机械安全.压敏防护装置.压敏减震器、板材、线材和类似设备的设计和试验通用规则 |
|
BS EN 1761-1999 |
燃料卡车提交的橡胶软管和软管组件.规范 |
(Rubber hoses and hose assemblies for fuel truck delivery - Specification) |
BS EN 1762-1998 |
液化石油气、LPG(液相或气相)及天然气用橡胶软管和软管组件.规范 |
(Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification) |
BS EN 1762-2004 |
25巴(2,5MPA)以下液化石油气(LPG)(液相或气相)以及天然气用橡胶软管和软管组件.规范 |
|
BS EN 1765-1998 |
油的吸放装置的橡胶软管组件.组件规范 |
(Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies) |
BS EN 1765-2004 |
油吸放装置用橡胶软管组件.组件规范 |
|
BS EN 1766-2000 |
混凝土结构的保护和修理用产品和系统.试验方法.试验用参考混凝土 |
(Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing) |
BS EN 1767-1999 |
混凝土结构的保护和修理用产品和系统.试验方法.远红外分析法 |
(Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis) |
BS EN 1770-1998 |
混凝土结构保护和修理的产品和设备.试验方法.热膨胀系数的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion) |
BS EN 1772-2000 |
表面活性剂.浸水法测定润湿力 |
(Surface active agents - Determination of wetting power by immersion) |
BS EN 1773-1997 |
纺织物.织物.宽度和长度测定 |
(Textiles - Fabrics - Determination of width and length) |
BS EN 1774-1998 |
锌和锌合金.铸造用合金.铸锭和液体 |
(Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid) |
BS EN 1775-1998 |
燃气供应.建筑物中的燃气管道.最大运转压力 |
(Gas supply - Gas pipework in buildings - Maximum operating pressure) |
BS EN 1776-1999 |
燃气供应.天然气测量站.功能要求 |
(Gas supply - Natural gas measuring stations - Functional requirements) |
BS EN 1777-2004 |
防火和救援服务用液压升降平台.安全要求和试验 |
|
BS EN 1777-2004 |
防火和救援服务用液压升降平台.安全要求和试验 |
|