标准号 |
中文名称 |
英文名称 |
| BS EN ISO 305-1999 |
塑料.与聚氯乙烯相关的含氯聚合物、共聚物及其混合物的热稳定性的测定.色变法 |
(Plastics - Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method) |
| BS EN ISO 3059-2001 |
无损检验.渗透检验和磁粒检验.外观条件 |
(Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions) |
| BS EN ISO 306-1997 |
塑料.热塑材料.维卡(VICAT)软化温度的测定 |
(Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)) |
| BS EN ISO 306-2004 |
塑料.热塑性材料.维卡(VICAT)软化温度的测定 |
|
| BS EN ISO 306-2004 |
塑料.热塑性材料.维卡(VICAT)软化温度的测定 |
|
| BS EN ISO 307-2003 |
塑料.聚酰胺.粘度值的测定 |
(Plastics - Polyamides - Determination of viscosity number) |
| BS EN ISO 308-1998 |
塑料.酚制模材料.丙酮可溶性物质的测定(在非制模状态下明显树脂的含量) |
(Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)) |
| BS EN ISO 3098-0-1998 |
技术产品文献.按字母分类.一般要求 |
(Technical product documentation - Lettering - General requirements) |
| BS EN ISO 3098-2-2000 |
技术产品文献.字体.拉丁字母、数字和标记 |
(Technical product documentation - Lettering - Latin alphabet, numerals and marks) |
| BS EN ISO 3098-3-2000 |
技术产品文献.字体.希腊字母 |
(Technical product documentation - Lettering - Greek alphabet) |
| BS EN ISO 3098-4-2000 |
技术产品文献.字体.拉丁字母的区分标记和特殊标记 |
(Technical product documentation - Lettering - Diacritical and particular marks for the Latin alphabet) |
| BS EN ISO 3098-5-1998 |
技术产品文献.字母.拉丁字母表,数字和标记的CAD字母排列 |
(Technical product documentation - Lettering - CAD lettering of the Latin alphabet, numerals and marks) |
| BS EN ISO 3098-6-2000 |
技术产品文献.字体.西里尔字母 |
(Technical product documentation - Lettering - Cyrillic alphabet) |
| BS EN ISO 3104-1996 |
石油及其产品的试验方法.石油产品.透明和不透明液体.运动粘度的测定和动力粘度的计算 |
(Methods of test for petroleum and its products - Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity) |
| BS EN ISO 3107-2004 |
牙科学.氧化锌/丁香酸和氧化锌/非丁香酸粘固粉 |
|
| BS EN ISO 3146-2000 |
塑料.用毛细管和偏振显微镜法测定半晶状聚合物的熔化性能(熔化温度或熔化区域) |
(Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods) |
| BS EN ISO 3164-2000 |
土方机械.防护结构的实验室评定.极限偏差容量规范 |
(Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume) |
| BS EN ISO 3166-1-1998 |
国家和区域名代码.国家代码 |
(Codes for the representation of names of countries and their subdivisions - Country codes) |
| BS EN ISO 3167-2003 |
塑料.多用途试样 |
(Plastics - Multipurpose test specimens) |
| BS EN ISO 3170-1999 |
液态石油.手工取样 |
(Petroleum liquids - Manual sampling) |
| BS EN ISO 3170-2004 |
石油及其产品的试验方法.BS 2000-475:石油液体.人工采样 |
|
| BS EN ISO 3171-1999 |
液态石油.自动管道取样 |
(Petroleum liquids - Automatic pipeline sampling) |
| BS EN ISO 3175-1-1998 |
纺织品.干洗和整理.纺织品和衣服除尘度的评估方法 |
(Textiles - Dry cleaning and finishing - Method for assessing the cleanability of textiles and garments) |
| BS EN ISO 3175-2-1998 |
纺织品.干洗和整理.四氯乙烯程序 |
(Textiles - Dry cleaning and finishing - Procedures for tetrachloroethene) |
| BS EN ISO 3175-3-2003 |
纺织品.干洗和整理.用烃溶液清洗和整理时性能测试的程序 |
(Textiles - Dry cleaning and finishing - Procedure for testing performance when cleaning and finishing using hydrocarbon solvent) |
| BS EN ISO 3175-4-2003 |
纺织品.干洗和整理.用模拟湿洗法清洗和整理时性能测试的程序 |
(Textiles - Dry cleaning and finishing - Procedure for testing performance when cleaning and finishing using simulated wetcleaning) |
| BS EN ISO 3188-1994 |
淀粉及其制品.用克耶达(Kjeldahl)法测定含氮量.滴定法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Titrimetric method |
| BS EN ISO 3219-1994 |
塑料.液态或起乳液或分散剂作用的聚合物/树脂.使用规定剪切率的旋转式粘度计测定粘度 |
(Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate) |
| BS EN ISO 3231-1993 |
涂料和清漆.对含二氧化硫的潮湿空气的抗性的测定 |
(Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide) |
| BS EN ISO 3251-2003 |
涂料、清漆和塑料.非挥发物质含量的测定 |
(Paints, varnishes and plastics - Determination of non-volatile-matter content) |
| BS EN ISO 3252-2000 |
粉末冶金.词汇 |
(Powder metallurgy - Vocabulary) |
| BS EN ISO 3262-1-1998 |
涂料填充剂.规范和试验方法.介绍和一般试验方法 |
Extenders for paints - Specifications and methods of test - Introduction and general test methods |
| BS EN ISO 3262-10-2000 |
涂料填充剂.规范和试验方法.片状天然滑石/亚氯酸盐 |
(Extenders for paints - Specifications and methods of test - Natural talc/chlorite in lamellar form) |
| BS EN ISO 3262-11-2000 |
涂料填充剂.规范和试验方法.含碳酸盐的片状天然滑石 |
(Extenders for paints - Specifications and methods of test - Natural talc, in lamellar form, containing carbonates) |
| BS EN ISO 3262-12-2001 |
涂料用填充剂.规范和试验方法.白云母类云母 |
(Extenders for paints - Specifications and methods of test - Muscovite-type mica) |
| BS EN ISO 3262-13-1998 |
涂料填充剂.规范和试验方法.天然石英(地) |
(Extenders for paints - Specifications and methods of test - Natural quartz (ground)) |
| BS EN ISO 3262-14-2000 |
涂料填充剂.规范和试验方法.白硅石 |
(Extenders for paints - Specifications and methods of test - Cristobalite) |
| BS EN ISO 3262-15-2000 |
涂料填充剂.规范和试验方法.透明石英 |
(Extenders for paints - Specifications and methods of test - Vitreous silica) |
| BS EN ISO 3262-16-2000 |
涂料填充剂.规范和试验方法.氢氧化铝 |
(Extenders for paints - Specifications and methods of test - Aluminium hydroxides) |
| BS EN ISO 3262-17-2000 |
涂料填充剂.规范和试验方法.沉淀硅酸钙 |
(Extenders for paints - Specifications and methods of test - Precipitated calcium silicate) |
| BS EN ISO 3262-18-2000 |
涂料填充剂.规范和试验方法.沉淀硅铝酸钠 |
Extenders for paints - Specifications and methods of test - Precipitated sodium aluminium silicate |
| BS EN ISO 3262-19-2000 |
涂料填充剂.规范和试验方法.沉淀石英 |
(Extenders for paints - Specifications and methods of test - Precipitated silica) |
| BS EN ISO 3262-2-1998 |
涂料填充剂.规范和试验方法.重晶石(天然硫化钡) |
(Extenders for paints - Specifications and methods of test - Barytes (natural barium sulfate)) |
| BS EN ISO 3262-20-2000 |
涂料填充剂.规范和试验方法.烟化石英 |
(Extenders for paints - Specifications and methods of test - Fumed silica) |
| BS EN ISO 3262-21-2000 |
涂料填充剂.规范和试验方法.石英砂(地下天然石英) |
(Extenders for paints - Specifications and methods of test - Silica sand (unground natural quartz)) |
| BS EN ISO 3262-22-2001 |
涂料用填充剂.规范和试验方法.热碱处理的硅藻土 |
(Extenders for paints - Specifications and methods of test - Flux-calcined kieselguhr) |
| BS EN ISO 3262-3-1998 |
涂料填充剂.规范和试验方法.沉淀硫酸钡 |
(Extenders for paints - Specifications and methods of test - Blanc fixe) |
| BS EN ISO 3262-4-1998 |
涂料填充剂.规范和试验方法.白色剂 |
(Extenders for paints - Specifications and methods of test - Whiting) |
| BS EN ISO 3262-5-1998 |
涂料填充剂.规范和试验方法.天然晶型碳酸钙 |
(Extenders for paints - Specifications and methods of test - Natural crystalline calcium carbonate) |
| BS EN ISO 3262-6-1998 |
涂料填充剂.规范和试验方法.沉淀碳酸钙 |
(Extenders for paints - Specifications and methods of test - Precipitated calcium carbonate) |
| BS EN ISO 3262-7-1998 |
涂料填充剂.规范和试验方法.白云石 |
(Extenders for paints - Specifications and methods of test - Dolomite) |
| BS EN ISO 3262-8-2000 |
涂料填充剂.规范和试验方法.天然粘土 |
(Extenders for paints - Specifications and methods of test - Natural clay) |
| BS EN ISO 3262-9-1998 |
涂料填充剂.规范和试验方法.煅烧粘土 |
(Extenders for paints - Specifications and methods of test - Calcined clay) |
| BS EN ISO 3269-2001 |
紧固件.验收检验 |
(Fasteners - Acceptance inspection) |
| BS EN ISO 3274-1997 |
几何产品规范(GPS).表面特征.轮廓法.接触装置的标定特性 |
(Geometric product specifications (GPS) - Surface texture - Profile method - Nominal characteristics of contact (stylus) instruments) |
| BS EN ISO 3325-1999 |
不包括硬质合金的烧结金属材料.横向断裂强度的测定 |
(Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength) |
| BS EN ISO 3336-1995 |
牙科学.合成聚合物牙齿 |
(Dentistry - Synthetic polymer teeth) |
| BS EN ISO 3344-1997 |
增强制品.水份含量的测定 |
(Reinforcement products - Determination of moisture content) |
| BS EN ISO 3376-2003 |
皮革.物理和机械试验.抗张强度和伸长率的测定 |
(Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension) |
| BS EN ISO 3377-1-2003 |
皮革.物理和机械试验.扯裂荷载.单边扯裂 |
(Leather - Physical and mechanical tests - Determination of tear load - Single edge tear) |
| BS EN ISO 3377-2-2003 |
皮革.物理和机械试验.扯裂荷载.双边扯裂 |
(Leather - Physical and mechanical tests - Determination of tear load - Double edge tear) |
| BS EN ISO 3378-2003 |
皮革.物理和机械试验.耐穿晶开裂和穿晶开裂指数的测定 |
(Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index) |
| BS EN ISO 3380-2003 |
皮革.物理和机械试验.100℃以下的收缩温度的测定 |
(Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 degrees C) |
| BS EN ISO 3382-2000 |
声学.根据其它声学参数测量厅堂混响时间 |
(Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters) |
| BS EN ISO 3385-1995 |
软质泡沫聚合材料.用定载冲击法测定疲劳 |
(Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding) |
| BS EN ISO 3386-1-1998 |
泡沫柔性聚合材料.压缩应力应变特性的测定.低密度材料 |
(Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Low-density materials) |
| BS EN ISO 3386-2-1998 |
泡沫柔性聚合材料.压缩情况下应力变形特性的测定.高密度材料 |
(Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - High-density materials) |
| BS EN ISO 340-2004 |
输送带.实验室规模的易燃性特性.要求和试验方法 |
|
| BS EN ISO 340-2004 |
输送带.实验室规模的易燃性特性.要求和试验方法 |
|
| BS EN ISO 3405-2000 |
石油及其制品的试验方法.石油产品.大气压力下蒸馏特性的测定 |
(Methods of test for petroleum and its products - Petroleum products - Determination of distillation characteristics at atmospheric pressure) |
| BS EN ISO 3411-2000 |
土方机械.操作者的人体尺寸和操作者最小座舱空间 |
(Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope) |
| BS EN ISO 3450-1996 |
土方机械的安全.刹车系统规范和橡胶轮胎机械的性能要求和检验程序 |
(Safety of earth-moving machinery - Specification for braking systems and performance requirements and test procedures for rubber-tyred machines) |
| BS EN ISO 3451-1-1997 |
塑料.灰份的测定.第1部分:一般方法 |
(Plastics - Determination of ash - General methods) |
| BS EN ISO 3451-4-2000 |
塑料.灰份的测定.聚酰胺 |
(Plastics - Determination of ash - Polyamides) |
| BS EN ISO 3451-5-2002 |
塑料.灰分测定.聚氯乙烯 |
(Plastics - Determination of ash - Poly(vinyl chloride)) |
| BS EN ISO 3452-2-2000 |
无损检验.渗透检验.渗透材料的试验 |
(Non-destructive testing - Penetrant testing - Testing of penetrant materials) |
| BS EN ISO 3452-3-1999 |
无损检验.渗透检验.第3部分:标准试样 |
(Non-destructive testing - Penetrant testing - Reference test blocks) |
| BS EN ISO 3452-4-1999 |
无损检验.渗透检验.第4部分:设备 |
(Non-destructive testing - Penetrant testing - Equipment) |
| BS EN ISO 3457-2003 |
土方机械.挡板.定义和要求 |
(Earth-moving machinery - Guards - Definitions and requirements) |
| BS EN ISO 3497-2001 |
金属镀层.镀层厚度的测量.X射线光谱测定法 |
(Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods) |
| BS EN ISO 3506-1-1998 |
耐腐蚀不锈钢紧固件的机械特性.螺栓、螺钉和螺柱 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs) |
| BS EN ISO 3506-2-1998 |
耐腐蚀不锈钢紧固件的机械特性.螺母 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners - Nuts) |
| BS EN ISO 3506-3-1998 |
耐腐蚀不锈钢紧固件的机械特性.不低于拉伸应力的定位螺丝和类似紧固件 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners - Set screws and similar fasteners not under tensile stress) |
| BS EN ISO 3506-4-2003 |
耐腐蚀不锈钢紧固件的机械特性.攻丝螺钉 |
(Mechanical properties of corrosion-resistant stainless-steel fasteners - Tapping screws) |
| BS EN ISO 354-2003 |
声学.混响室内声音吸收的测量 |
(Acoustics - Measurement of sound absorption in a reverberation room) |
| BS EN ISO 3543-2001 |
金属和非金属涂层.厚度测量.射线反向散射法 |
(Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method) |
| BS EN ISO 3549-1996 |
涂料用锌粉颜料.规范和试验方法 |
(Zinc dust pigments for paints - Specifications and test methods) |
| BS EN ISO 3582-2001 |
柔性多孔聚合材料.在小火焰条件下小试样水平方向燃烧特性的实验室评定 |
(Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame) |
| BS EN ISO 3593-1994 |
淀粉.灰分的测定 |
(Starch - Determination of ash) |
| BS EN ISO 3596-2001 |
动植物脂肪和油.非皂化物的测定.己烷萃取法 |
(Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction) |
| BS EN ISO 3613-2001 |
锌,镉,铝-锌合金和锌铝合金的铬酸盐转化镀层.试验方法 |
(Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods) |
| BS EN ISO 3630-1-1993 |
牙根管器械.锉刀、扩孔器、毛刺钻孔器、粗锉、软膏、探测器和棉条钻孔器 |
(Dental root-canal instruments - Files, reamers, barbed broaches, rasps, paste carriers, explorers and cotton broaches) |
| BS EN ISO 3630-2-2001 |
牙根管器械.扩孔器 |
(Dental root-canal instruments - Enlargers) |
| BS EN ISO 3630-3-1997 |
牙根管器械.冷却器、充填器和扩张器 |
(Dental root-canal instruments - Condensers, pluggers and spreaders) |
| BS EN ISO 3650-1999 |
几何制品规范(GPS).长度标准.块规 |
(Geometrical product specifications (GPS) - Length standards - Gauge blocks) |
| BS EN ISO 3651-1-1998 |
不锈钢耐晶间腐蚀的测定.第1部分:奥氏体和铁素体奥氏体(二重)不锈钢.测定不锈钢在硝酸介质中质量损失的腐蚀 |
(Determination of resistance to intergranular corrosion of stainless steels - Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss) |
| BS EN ISO 3651-2-1998 |
不锈钢耐晶间腐蚀的测定.第2部分:铁素体、奥氏体和铁素体奥氏体(二重)不锈钢.含有硫酸的介质中的腐蚀试验 |
(Determination of resistance to intergranular corrosion of stainless steels - Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid) |
| BS EN ISO 3656-2002 |
动植物脂肪和油.特制的 UV 消光表示的紫外线吸收率的测定 |
(Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction) |
| BS EN ISO 3657-2002 |
动植物油脂.皂化值的测定 |
(Animal and vegetable fats and oils - Determination of saponification value) |
| BS EN ISO 3673-2-2000 |
塑料.环氧树脂.试样的制备和特性的测量 |
(Plastics - Epoxy resins - Preparation of test specimens and determination of properties) |
| BS EN ISO 3675-1998 |
原油和液体石油产品.密度的实验室测定.比重计法 |
(Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method) |
| BS EN ISO 3677-1995 |
软锡焊,铜焊和焊连接用填充金属.名称与符号. |
(Filler metal for soft soldering, brazing and braze welding - Designation) |
| BS EN ISO 3678-1978 |
涂料和清漆.不粘纸试验 |
(Paints and varnishes - Print-free test) |
| BS EN ISO 3679-2004 |
石油及其制品的试验方法.BS 2000-523:闪点的测定.快速平衡闭杯法 |
|
| BS EN ISO 3680-2004 |
石油及其制品的试验方法.BS 2000-524:闪点/非闪点的测定.快速平衡闭杯法 |
|
| BS EN ISO 3681-1996 |
涂料和清漆用粘合剂.皂化值测定.滴定法 |
(Binders for paints and varnishes - Determination of saponification value - Titrimetric method) |
| BS EN ISO 3682-1996 |
涂料和清漆用粘合剂.酸值测定.滴定法 |
(Binders for paints and varnishes - Determination of acid value - Titrimetric method) |
| BS EN ISO 3690-2001 |
焊接和相伴处理.铁素体钢弧焊金属氧含量的测定 |
(Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal) |
| BS EN ISO 3696-1987 |
分析实验室用水.规范和试验方法 |
(Water for analytical laboratory use - Specification and test methods) |
| BS EN ISO 3715-1-2004 |
船舶和海上技术.船用推进装置.推进器几何学词汇 |
|
| BS EN ISO 3727-1-2002 |
黄油.水、非脂固体及脂肪含量的测定.水含量的测定(参照法) |
(Butter - Determination of moisture, non-fat solids and fat contents - Determination of moisture content (Reference method)) |
| BS EN ISO 3727-2-2002 |
黄油.水、非脂固体及脂肪含量的测定.非脂固体含量的测定(参照法) |
(Butter - Determination of moisture, non-fat solids and fat contents - Determination of non-fat solids content (Reference method)) |
| BS EN ISO 3727-3-2003 |
黄油.含水量、非脂肪固体含量和脂肪含量的测定.脂肪含量的计算 |
(Butter - Determination of moisture, non-fat solids and fat contents - Calculation of fat content) |
| BS EN ISO 3735-1999 |
原油和燃料油.沉积物的测定.萃取法 |
(Crude petroleum and fuel oils - Determination of sediment - Extraction method) |
| BS EN ISO 3740-2001 |
声学.噪声源的声压级的测定.基本标准使用导则 |
(Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards) |
| BS EN ISO 3741-2000 |
声学.用声压测定噪声源声音功率级.混响室内的精密方法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms) |
| BS EN ISO 3743-1-1994 |
声学.噪声源声功率级的测定.在混响声场中小声源和移动声源的工程测量方法.第1部分:硬墙试验室的比较分析法 |
(Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Comparison for hard-walled test rooms) |
| BS EN ISO 3743-2-1995 |
声学.噪声源的声功率级测定.在混响场中对可移动声源的工程测量方法.用专用混响试验室的测量方法 |
(Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Methods for special reverberation test rooms) |
| BS EN ISO 3744-1994 |
声学.噪声源音响功率级的测定 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane) |
| BS EN ISO 3746-1996 |
声学.噪声源音响功率级的测定.在反射平面上利用包封测量表面的测量法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com