标准号 |
中文名称 |
英文名称 |
| BS EN 61300-2-40-2001 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.单模调谐角度光纤连接器衰减的屏幕试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of attenuation of single-mode tuned angled optical connectors) |
| BS EN 61300-2-41-1998 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.单模式调谐非角度光纤连接器的筛析试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of attenuation of single-mode tuned non-angled optical fibre connectors) |
| BS EN 61300-2-42-1999 |
光纤互连装置和无源部件.基本试验和测量步骤.试验.连接件静态边负载 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Static side load for connectors) |
| BS EN 61300-2-43-2000 |
光纤互连装置和无源部件.基本试验和测量步骤.试验.单模PC光纤连接器回程损失的筛析试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of return loss of single mode PC optical fibre connectors) |
| BS EN 61300-2-44-2005 |
纤维光学互连器件和无源件.基本试验和测量程序.试验.纤维光学器件应力消除的挠曲 |
|
| BS EN 61300-2-45-1999 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.浸水持久性试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Durability test by water immersion) |
| BS EN 61300-2-47-2004 |
光纤互连器件和无源件.基本试验和测量程序.试验.热冲击 |
|
| BS EN 61300-2-47-2004 |
光纤互连器件和无源件.基本试验和测量程序.试验 |
|
| BS EN 61300-2-47-2004 |
纤维光学互连器件和无源件.基本试验和测量程序.试验.热冲击 |
|
| BS EN 61300-2-48-2003 |
光纤互连器件和无源件.基本试验和测量规程.试验.温度-湿度循环 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Temperature-humidity cycling) |
| BS EN 61300-2-5-2003 |
光纤互连器件和无源件.基本试验和测量程序.试验.扭绞 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Torsion/twist) |
| BS EN 61300-2-6-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.联接机械的抗拉强度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Tensile strength of coupling mechanism) |
| BS EN 61300-2-7-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.弯曲力矩试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Bending moment) |
| BS EN 61300-2-8-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.连续冲击试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Bump) |
| BS EN 61300-2-9-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.冲击试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Shock) |
| BS EN 61300-3-1-1997 |
光纤互连装置和无源部件.基本试验和测量步骤.第3-1部分:检查和测量.外观检查 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Visual examination) |
| BS EN 61300-3-10-1997 |
光纤互联装置和无源部件.第3-10部分:检查和测量.标准保持力 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Gauge retention force) |
| BS EN 61300-3-11-1997 |
光纤互联装置和无源部件.第3-11部分:检查和测量.连接和分离力 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Engagement and separation forces) |
| BS EN 61300-3-12-1997 |
光纤互联设备和无源件.基本试验和测量程序.第3部分第12节:检验和测量.由单模式光纤件衰减产生的偏振:点 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Polarization dependence of attenuation of a single-mode fibre optic) |
| BS EN 61300-3-13-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第3-13部分:检查和测量.光纤继电器的稳定性控制 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Control stability of a fibre optic switch) |
| BS EN 61300-3-14-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第3-14部分:检查和测量.不同的衰减器的衰减装置的准确性和可重 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variabl) |
| BS EN 61300-3-15-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第3-15部分:凸状抛光金属端面偏心率 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Eccentricity of a convex polished ferrule endface) |
| BS EN 61300-3-16-2003 |
光纤互联装置和无源部件.基本试验和测量程序.检查和测量.球形抛光金属箍的端面半径 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Endface radius of spherically polished ferrules) |
| BS EN 61300-3-17-2000 |
光纤互连装置和无源部件.基本试验和测量程序.检验和测量.角抛光套圈的端面角 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Endface angle of angle-polished ferrules) |
| BS EN 61300-3-18-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第3-18部分:一个倾斜的角的端面连接器的键控准确性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Keying accuracy of an angled endface connector) |
| BS EN 61300-3-19-1997 |
光纤互联装置和无源部件.基本试验和测量程序.检验和测量.由单模光纤件回波损耗产生的偏振 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Polarization dependence of return loss of a single-mode fibre optic) |
| BS EN 61300-3-1997 |
光纤互联设备和无源件.基本试验和测量程序.第3部分第19节:检验和测量.由单模式光纤件回波损耗产生的偏 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polarization dependence of return loss of a single-mode fibre optic co) |
| BS EN 61300-3-2-1999 |
光纤互连装置和无源部件.基本试验和测量程序.检验和测量.单模光纤装置中衰减的偏振依赖性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Polarization dependence of attenuation in a single-mode fibre optic) |
| BS EN 61300-3-20-2002 |
光纤互联装置和无源部件.基本试验和测量步骤.检验和测量.光纤分路器的指向性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Directivity of fibre optic branching devices) |
| BS EN 61300-3-21-1998 |
光纤互联装置和无源部件.基本试验和测量步骤.检验和测量.开关时间和回跳时间 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Switching time and bounce time) |
| BS EN 61300-3-22-1997 |
光纤互联设备和无源件.基本试验和测量程序.第3部分第22节:检验和测量.金属加固环的压缩力 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Ferrule compression force) |
| BS EN 61300-3-23-1998 |
光纤互连装置和无源部件.基本试验和测量步骤.试验和测量.与金属箍末端有关的纤维位置 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examination and measurements - Fibre position relative to ferrule e) |
| BS EN 61300-3-24-2000 |
光纤互联装置和无源部件.基本试验和测量步骤.检验和测量.偏振维护纤维用光学连接器的键控精确度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining) |
| BS EN 61300-3-25-1997 |
光纤互联设备和无源件.基本试验和测量程序.第3部分第25节:检验和测量.装配有光纤的金属加固环间的同心度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Concentricity of the ferrules and ferrules with fibre installed) |
| BS EN 61300-3-26-2002 |
光纤互连器件和无源件.基本试验和测量程序.检验和测量.光纤和金属加固环轴线间角度误差的测量 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule a) |
| BS EN 61300-3-27-1997 |
光纤互连设备和无源件.基本试验和测量程序.第3部分第27节:检验和测量.多路连接器插头的孔定位测量方法 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Measurement method for the hole location of a multiway connector pl) |
| BS EN 61300-3-28-2002 |
光纤互连设备和无源件.基本试验和测量程序.检验和测量.瞬时损耗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Transient loss) |
| BS EN 61300-3-3-2003 |
光纤互联设备和无源部件.基本试验和测量步骤.检验和测量.衰减和回波损耗变化的动态监控 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Active monitoring of changes in attenuation and return loss) |
| BS EN 61300-3-30-2003 |
光纤互连器件和无源件.基本试验和测量程序.检查和测量.单套管多纤连接器上的光纤位置和抛光角度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connec) |
| BS EN 61300-3-31-2003 |
光纤互连器件和无源件.基本试验和测量规程.检验和测量.光纤光源的耦合功率比测量 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Coupled power ratio measurement for fibre optic sources) |
| BS EN 61300-3-33-1999 |
光纤互联装置和无源部件.基本试验和测量步骤.检验和测量.金属箍拔出力 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Ferrule withdrawal force) |
| BS EN 61300-3-34-2002 |
光纤互连设备和无源件.基本试验和测量程序.检验和测量.随机配合连接器的损耗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Attenuation of random mated connectors) |
| BS EN 61300-3-36-2000 |
光纤互连装置和无源部件.基本试验和测量步骤.检验和测量.纤维光学连接器金属箍的内径和外径的测量方法 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Measurement methods for the inside) |
| BS EN 61300-3-39-1998 |
光纤互连装置和无源部件.基本试验和测量步骤.检查和测量.PC光学连接器标准插头的选择 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - PC optical connector reference plug selection) |
| BS EN 61300-3-4-2001 |
光纤互联装置和无源部件.基本试验和测量步骤.检验和测量.衰减 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Attenuation) |
| BS EN 61300-3-40-1998 |
光纤互联装置和无源部件.基本试验和测量步骤.检验和测量.极化维持(PM)纤维软导线连接器的消光比 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Extinction ratio of a polarization maintaining (pm) fibre pigtailed) |
| BS EN 61300-3-5-2001 |
光纤互联装置和无源部件.基本试验和测量步骤.检验和测量.衰减的波长依赖 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Wavelength dependence of attenuation) |
| BS EN 61300-3-6-2003 |
光纤互联设备和无源部件.基本试验和测量步骤.检验和测量.回波损耗 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Return loss) |
| BS EN 61300-3-7-2001 |
光纤互连设备和无源件.基本试验和测量程序.检验和测量.衰减和回波损耗的相关波长 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Wavelength dependence of attenuation and return loss) |
| BS EN 61300-3-8-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.检查和测量.室内光的敏感度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Ambient light susceptibility) |
| BS EN 61300-3-9-1997 |
光纤互联设备和无源件.基本试验和测量程序.第3部分第9节:检验和测量.远端串音 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Far-end crosstalk) |
| BS EN 61302-1996 |
电气绝缘材料.抗电弧和侵蚀性的评定.常规轮浸蚀试验 |
(Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test) |
| BS EN 61303-1997 |
医疗电气设备.放射性核素调整器.描述性能的特殊方法 |
(Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance) |
| BS EN 61305-1-1995 |
家用高保真音响设备和系统.性能检测和说明的方法.第1部分:总则 |
(Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - General) |
| BS EN 61305-2-1998 |
家用高保真音响设备和系统.性能检测和说明的方法.FM无线电调谐器 |
(Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - FM radio tuners) |
| BS EN 61305-3-1995 |
家用高保真音响设备和系统.性能检测和说明的方法.放大器 |
(Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Amplifiers) |
| BS EN 61305-5-2003 |
家用高保真音响设备和系统.测量和规定性能的方法.扬声器 |
(Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Loudspeakers) |
| BS EN 61307-1997 |
工业微波加热装置.输出功率测量的试验方法 |
(Industrial microwave heating installations - Test methods for the determination of power output) |
| BS EN 61308-1997 |
高频电介质加热装置.测定输出功率的试验方法 |
(High-frequency dielectric heating installations - Test methods for the determination of power output) |
| BS EN 61309-1995 |
家用深油煎锅.性能测量方法 |
(Deep-fat fryers for household use - Methods for measuring the performance) |
| BS EN 61310-1-1995 |
机械安全.指示,标志和活动.第1部分:可视,可听和可触模信号要求 |
(Safety of machinery - Indication, marking and actuation - Requirements for visual, auditory and tactile signals) |
| BS EN 61310-2-1995 |
机械安全.指示,标志和活动.第2部分:标志要求 |
Safety of machinery - Indication, marking and actuation - Requirements for marking |
| BS EN 61310-3-1999 |
机械安全.指示、标志和活动.活动的位置和操作要求 |
(Safety of machinery - Indication, marking and actuation - Requirements for the location and operation of actuators) |
| BS EN 61313-1-1997 |
光纤无源部件和电缆组件.第1部分:能力鉴定.总规范 |
Fibre optic passive components and cable assemblies - Capability approval - Generic specification |
| BS EN 61314-1-1995 |
电子器件质量评定协调体系.光纤输出端数.第1部分:总规范 |
Harmonized system of quality assessment for electronic components - Fibre optic fan-outs - Generic specification |
| BS EN 61315-1997 |
光纤功率仪校正 |
(Calibration of fibre optic power meters) |
| BS EN 61316-2000 |
工业电缆卷筒 |
(Industrial cable reels) |
| BS EN 61319-1-1996 |
卫星接收设备的互连.欧洲 |
(Interconnections of satellite receiving equipment - Europe) |
| BS EN 61325-1996 |
标称电压高于1000V以上高架线的绝缘.直流装置陶瓷或玻璃绝缘件.定义,试验方法和验收规则 |
Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for d.c systems - Definitions, test methods and acceptance criteria |
| BS EN 61326-1997 |
测量、控制和实验室用电气设备.电磁兼容性(EMC)的要求 |
Electrical equipment for measurement, control and laboratory use - EMC requirements |
| BS EN 61327-1996 |
D-3接口,12,65mm(0.5 in)磁带用数字扫描混合成的盒式录象系统 |
Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-3 |
| BS EN 61329-1996 |
声发生设备.发声器的规定性能和测量方法(发声用电解传感器) |
Sound system equipment - Methods for measuring and specifying the performance of sounders (electroacoustic transducers for tone production) |
| BS EN 61330-1996 |
预制的高压/低压变电所 |
High-voltage/low-voltage prefabricated substations |
| BS EN 61331-1-1995 |
医用诊断时X射线辐射防护器具.材料的衰减性能的测定 |
Protective devices against diagnostic medical X-radiation - Determination of attenuation properties of materials |
| BS EN 61331-2-1995 |
医用诊断时X射线辐射防护器具.防护玻璃板 |
Protective devices against diagnostic medical X-radiation - Protective glass plates |
| BS EN 61331-3-1999 |
X射线医疗诊断保护装置.生殖腺防护装置和防护服装 |
Protective devices against diagnostic medical X-radiation - Protective clothing and protective devices for gonads |
| BS EN 61332-1997 |
软铁酸盐材料分级 |
Soft ferrite material classification |
| BS EN 61333-1998 |
U和E铁酸盐磁芯的标记 |
Marking on U and E ferrite cores |
| BS EN 61334-3-21-1997 |
配电线路载体系统的配电自动化.电力线信号要求.MV两线之间的绝缘电容耦合装置 |
Distribution automation using distriubution line carrier systems - Mains signalling requirements - MV phase-to-phase isolated capacitive coupling device |
| BS EN 61334-3-22-2001 |
配电线路载体系统的配电自动化.主要信令要求.MV 相位到地面和网屏到地面的侵入式耦合装置 |
Distribution automation using distriubution line carrier systems - Mains signalling requirements - MV phase to earth and screen to earth coupling devices |
| BS EN 61334-4-1-1997 |
使用配线载波系统的自动分布操作.数据通信协议.通信系统的参考模型 |
(Distribution automation using distribution line carrier systems - Data communication protocols - Reference model of the communication system) |
| BS EN 61334-4-32-1997 |
使用配线载波系统的自动分布操作.第4部分:数据通信协议.第32节:数据链层.逻辑链结控制(LLC) |
(Distribution automation using distribution line carrier systems - Data communication protocols - Data link layer - Logical link control (LLC)) |
| BS EN 61334-4-33-1998 |
使用配电线路载体系统的配电自动化.数据通信协议.数据链接层.定向连接协议 |
Distribution automation using distribution line carrier systems - Data communication protocols - Data link layer - Connection oriented protocol |
| BS EN 61334-4-41-1998 |
配电线路载体系统的配电自动化.数据通信协议.应用协议.配线信号规范 |
(Distribution automation using distribution line carrier systems - Data communication protocols - Application protocols - Distribution line message specification) |
| BS EN 61334-4-42-1997 |
使用配线载波系统的自动分布操作.数据通信协议.应用协议.应用层 |
(Distribution automation using distribution line carrier systems - Data communication protocols - Application protocols - Application layer) |
| BS EN 61334-4-511-2001 |
配电线路载体系统的配电自动化.数据通信协议.系统管理.CIASE协议 |
(Distribution automation using distribution line carrier systems - Data communication protocols - Systems management - CIASE protocol) |
| BS EN 61334-4-512-2002 |
使用配电线路载体系统的配电自动化.数据通信协议.使用61334-5-1轮廓的系统管理.管理信息基础 |
(Distribution automation using distribution line carrier systems - Data communication protocols - System management using profile 61334-5-1 - Management Information Base (MIB)) |
| BS EN 61334-4-61-1998 |
使用配电线路载体系统的配电自动化.数据通信协议.网络层.非连接协议 |
(Distribution automation using distribution line carrier systems - Data communication protocols - Network layer - Connectionless protocol) |
| BS EN 61334-5-1-2001 |
配电线路载体系统的配电自动化.低层轮廓.扩展频率键控轮廓 |
(Distribution automation using distribution line carrier systems - Lower layer profiles - The spread frequency shift keying (S-FSK) profile) |
| BS EN 61334-6-2001 |
配电线路载波系统的配电自动化.A-XDR编码规则 |
Distribution automation using distribution line carrier systems - A-XDR encoding rule |
| BS EN 61337-1-1-1998 |
使用波导型介电谐振器的滤波器.一般信息、标准值和试验条件.一般信息和标准值 |
(Filters using waveguide type dielectric resonators - General information, standard values and test conditions - General information and standard values) |
| BS EN 61337-1-2005 |
使用波导型介电谐振器的滤波器.总规范 |
|
| BS EN 61337-1-2005 |
使用波导型介电谐振器的滤波器.总规范 |
|
| BS EN 61337-2-2004 |
采用波导型介电谐振器的滤波器.使用指南 |
|
| BS EN 61338-1-2005 |
波导型介电谐振器.总规范 |
|
| BS EN 61338-1-3-2000 |
波导型介质谐振器.通用信息和试验条件.微波频段的介质谐振器材料的复合相对电容率测量方法 |
(Waveguide type dielectric resonators - General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency) |
| BS EN 61338-2-2004 |
波导型介质谐振器.振荡器和滤波器指南 |
|
| BS EN 61338-2-2004 |
波导型介质谐振器.振荡器和滤波器指南 |
|
| BS EN 61340-2-1-2002 |
静电学.测量方法.材料和产品去静电能力 |
(Electrostatics - Measurement methods - Ability of materials and products to dissipate static electric charge) |
| BS EN 61340-2-3-2000 |
静电学.用于避免静电放电积累的固体二维材料的电阻和电阻率测定的试验方法 |
(Electrostatics - Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation) |
| BS EN 61340-3-1-2002 |
静电学.静电效果的模拟方法.人体模型.部件测试 |
(Electrostatics - Methods for simulation of electrostatic effects - Human body model (HBM) - Component testing) |
| BS EN 61340-3-2-2002 |
静电学.静电效果的模拟方法.机械模型.部件测试 |
(Electrostatics - Methods for simulation of electrostatic effects - Machine model (MM) - Component testing) |
| BS EN 61340-4-1-2004 |
静电学.对于专门用途的标准试验方法.地板覆盖物和已装修地板的电阻 |
|
| BS EN 61340-4-1-2004 |
静电.对于专门用途的标准试验方法 |
|
| BS EN 61340-4-1-2004 |
静电学.对于专门用途的标准试验方法.地板覆盖物和已装修地板的抗电性 |
|
| BS EN 61340-4-3-2002 |
静电学.特殊用途的标准试验方法.鞋类 |
(Electrostatics - Standard test methods for specific applications - Footwear) |
| BS EN 61340-4-5-2004 |
静电.专用的标准试验方法.鞋靴和地板与人之间静电防护的表征方法 |
|
| BS EN 61345-1998 |
光电(PV)模的紫外线试验 |
(UV test for photovoltaic (PV) modules) |
| BS EN 61346-1-1996 |
工业系统、装置和设备和工业产品.结构规则和参考命名.第1部分:基本规则 |
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Basic rules |
| BS EN 61346-2-2001 |
工业系统、装置和设备和工业产品.结构规则和参考命名.物体的分级和分级编码 |
(Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Classification of objects and codes for classes) |
| BS EN 61347-1-2001 |
灯控制开关.一般和安全要求 |
(Lamp controlgear - General and safety requirements) |
| BS EN 61347-2-1-2001 |
灯控制开关.启动装置的特殊要求 |
(Lamp controlgear - Particular requirements for starting devices (other than glow starters)) |
| BS EN 61347-2-10-2001 |
灯控制开关.冷的管型放电灯高频操作的电子转换器和电子逆变器的的特殊要求 |
(Lamp controlgear - Particular requirements for electronic invertors and convertors for high-frequency operation of cold tubular discharge lamps (neon tubes)) |
| BS EN 61347-2-11-2002 |
灯控制装置.与灯具一起使用的多种电路的特殊要求 |
(Lamp controlgear - Particular requirements for miscellaneous electronic circuits used with luminaires) |
| BS EN 61347-2-2-2001 |
灯控制开关.白热丝灯直流和交流电力转化器的特殊要求 |
(Lamp controlgear - Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps) |
| BS EN 61347-2-3-2001 |
灯控制开关.荧光灯交流电子镇流器的特殊要求 |
(Lamp controlgear - Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps) |
| BS EN 61347-2-4-2001 |
灯控制开关.一般照明的直流电子镇流器的特殊要求 |
(Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for general lighting) |
| BS EN 61347-2-5-2001 |
灯控制开关.公共运输照明的直流电子镇流器的特殊要求 |
(Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for public transport lighting) |
| BS EN 61347-2-6-2001 |
灯控制开关.飞行器照明的直流电子镇流器的特殊要求 |
(Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for aircraft lighting) |
| BS EN 61347-2-7-2001 |
灯控制开关.紧急照明的直流电子镇流器的特殊要求 |
(Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for emergency lighting) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com