标准号 |
中文名称 |
英文名称 |
| BS 6431-4.1-1986 |
地瓷砖和墙面瓷砖.第4部分:吸水率E大于6%、小于或等于10%的挤压成型瓷砖规范.A11a类.第1节:一般产品规范 |
(Ceramic floor and wall tiles - Extruded ceramic tiles with a water absorption of 6%) |
| BS 6431-4.2-1986 |
地瓷砖和墙面瓷砖.第4部分:吸水率E大于6%、小于或等于10%的挤压成型瓷砖规范.A16类.第2节:专用产品(法国和 |
(Ceramic floor and wall tiles - Extruded ceramic tiles with a water absorption of 6%) |
| BS 6431-5-1986 |
标准号： |
中文标题： |
| BS 6431-6-1984 |
地面瓷砖和墙面瓷砖.第6部分:低吸水率(E小于或等于3%)的粉压成型瓷砖规范.B1类 |
(Ceramic floor and wall tiles - Specification for dust-pressed ceramic tiles with a low water absorption (E) |
| BS 6431-7-1986 |
地面瓷砖和墙面瓷砖 |
(Ceramic floor and wall tiles - Specification for dust-pressed ceramic tiles with a water absorption of 3%) |
| BS 6431-8-1986 |
地面瓷砖和墙面瓷砖 |
(Ceramic floor and wall tiles - Specification for dust-pressed ceramic tiles with a water absorption of 6%) |
| BS 6431-9-1984 |
标准号： |
中文标题： |
| BS 6433-1983 |
木工锯齿的剖面术语和名称 |
(Terminology and designation of the profile shape of woodworking saw teeth) |
| BS 6434-1984 |
BS 6065“成形耐火材料制品的取样和验收方法“ 的使用指南 |
(Guide to the use of BS 6065 ’Methods for sampling and acceptance testing of shaped refractory products’) |
| BS 6435-1984 |
变压器与整流圈的高压电缆的干燥端子防潮用未充填护套规范 |
(Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors) |
| BS 6436-1984 |
电缆箱或分电站连接用固定式配电变压器规范 |
(Specification for ground mounted distribution transformers for cable box or unit substation connection) |
| BS 644-2003 |
木窗.工厂用各种类型组装窗的规范 |
(Timber windows - Factory assembled windows of various types - Specification) |
| BS 6440-1999 |
残疾人用动力升降台.实施规程 |
(Powered lifting platforms for use by disabled persons - Code of practice) |
| BS 6441-1993 |
石油测量表规范 |
(Schedule for petroleum measurement tables) |
| BS 6442-1984 |
弹性环形密封圈(“O“形环)表面凹陷的极限规范 |
(Specification for limits of surface imperfections on elastomeric toroidal sealing rings (’O’-rings)) |
| BS 6444-1-1990 |
心血管外科植入物.第1部分:心脏瓣膜置换物试验方法及其包装与加标签的要求 |
(Cardiovascular implants - Methods of test for heart valve substitutes and requirements for their packaging and labelling) |
| BS 6446-1997 |
木材和木质板制品胶合构件的制作规范 |
(Specification for manufacture of glued structural components of timber and wood based panels) |
| BS 6447-1984 |
输出为电量的绝对压力发送器与表压发送器规范 |
(Specification for absolute and gauge pressure transmitters with electrical outputs) |
| BS 6448-1995 |
进气口压力最大为200巴和DN大于50的燃气用调节器规范 |
(Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar) |
| BS 6449-2-1984 |
橡胶配合料.沉淀的含水二氧化硅.橡胶的物理性能的测定方法(包括试验方法) |
(Rubber compounding ingredients: precipitated, hydrated silica - Method for determination of physical properties in rubber (including test recipe)) |
| BS 6450-1-1993 |
由公共电信话务员操作的与公共交换电话网连接的专用支线交换机.一般要求规范 |
(Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators - Specification for general requirements) |
| BS 6450-2-1993 |
由公共电信话务员操纵的公共交换电话网连接的专用支线交换机.终端站作为整体对待的专用支线交换机规范 |
(Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators - Specification for private branch exchanges with terminating stations) |
| BS 6450-3.1-1993 |
由某些公共电信操作员控制的与公共交换电话网连接的专用支线交换机.电用支线交换机直接拨号.第1节:与整体终 |
() |
| BS 6450-5.1-1993 |
由公共电信话务员操作的与公共交换电话网连接的专用支线交换机. 专用支线交换机设备.与终端站作为整体对待 |
(Private branch exchanges for connection to the British Telecommunications public switched telephone network - Facilities on private branch exchanges - Specification for facilities on private branch ex) |
| BS 6450-6.1-1993 |
由公共电信话务员操作的公共交换电话网连接用专用支线交换机.简单呼叫路由方式(SCRM).第1节:终端站作为实体 |
() |
| BS 6450-7-1990 |
与英国通信网公共切换电话网连接的专用支线交换机.第7部分:进行型式批准中的专用支线支换机的使用中观察程 |
(Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators - Specification for the procedure for in-service observation of PBXs und) |
| BS 6451-1984 |
地面运输用网和绳索织成的负荷限制装置规范 |
(Specification for netting and fibre rope load restraint systems in surface transport) |
| BS 6452-1-1983 |
内部粉饰和干砌用的串珠.第1部分:镀锌钢珠规范 |
(Beads for internal plastering and dry lining - Specification for galvanized steel beads) |
| BS 6453-1984 |
服装用皮革性能规范 |
(Specification for performance of leathers for garments) |
| BS 6455-1984 |
软性包装材料中溶剂残留成分的监测方法 |
(Method for monitoring the levels of residual solvents in flexible packaging materials) |
| BS 6456-1983 |
信封名词词汇 |
(Glossary of terms for correspondence envelopes) |
| BS 6457-1984 |
翻修用的石砌块规范 |
(Specification for reconstructed stone masonry units) |
| BS 6458-2.1-1984 |
电工产品的火灾危险试验.试验方法.热灯丝试验 |
(Fire hazard testing for electrotechnical products - Test methods - Glow-wire test) |
| BS 6458-2.3-1985 |
电工产品的火灾危险试验.试验方法.与加热器不良接点试验 |
(Fire hazard testing for electrotechnical products - Test methods - Bad-connection test with heaters) |
| BS 6460-1-1983 |
测试实验室的认可.第1部分:测试实验室技术能力的一般要求规范 |
(Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories) |
| BS 6461-1-1984 |
烧固体燃料(含木柴和泥煤)的家用灶具的烟囱和烟道的安装.第1部分:砖石砌筑烟囱和烟管实用规程 |
(Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) - Code of practice for masonry chimneys and flue pipes) |
| BS 6462-1985 |
三角型玻璃窗扇风撑和正面固定的侧楔紧固件机械性能规范 |
(Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners) |
| BS 6463-101-1996 |
生石灰、熟石灰与天然碳酸钙.试验用试样的制备方法 |
(Quicklime, hydrated lime and natural calcium carbonate - Methods for preparing samples for testing) |
| BS 6463-102-2001 |
生石灰、熟石灰与天然碳酸钙.化学分析方法 |
(Quicklime, hydrated lime and natural calcium carbonate - Methods for chemical analysis) |
| BS 6463-103-1999 |
生石灰、熟石灰与天然碳酸钙.物理试验方法 |
(Quicklime, hydrated lime and natural calcium carbonate - Methods for physical testing) |
| BS 6464-1984 |
制炼厂用增强塑料管、配件和接头规范 |
(Specification for reinforced plastics pipes, fittings and joints for process plants) |
| BS 6465-1-1995 |
卫生设备.第1部分:卫生设备的供应、选购与安装规模实用规程 |
(Sanitary installations - Code of practice for scale of provision, selection and installation of sanitary appliances) |
| BS 6465-2-1996 |
卫生器具.卫生器具的空间要求实用规程 |
(Sanitary installations - Code of practice for space requirements for sanitary appliances) |
| BS 6466-1984 |
陶瓷纤维炉衬的设计和安装实用规程 |
(Code of practice for design and installation of ceramic fibre furnace linings) |
| BS 6468-1984 |
深度千分尺规范 |
(Specification for depth micrometers) |
| BS 6469-98.1-1996 |
电缆的绝缘和护套材料.附加的调和无电试验方法.TMPU护套的试验 |
(Insulating and sheathing materials of electric cables - Additional harmonized non-electrical test methods - Test for TMPU sheath) |
| BS 6469-99.1-1992 |
电缆的绝缘和护套材料.第99部分:用于英国的试验方法,但不规定在BS 6469 Pt.1 至 Pt.5中.第1节:非电子试验 |
(Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Non-electrical tests) |
| BS 6469-99.2-1992 |
电缆的绝缘和护套材料.第99部分:用于英国的试验方法,但不规定在BS EN 60811或BS 6469的其它部分中.第2节:电 |
(Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Electrical tests) |
| BS 6470-1984 |
绝缘油、油浸绝缘纸和绝缘层压板中含水量的测定方法 |
(Method for determination of water in insulating oils, and in oil-impregnated paper and pressboard) |
| BS 6472-1992 |
建筑物中振动(频率为1-80Hz)对人影响的评定指南 |
(Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)) |
| BS 6475-1984 |
处理机系统总线接口(欧洲总线Ａ)规范 |
(Specification for processor system bus interface (Eurobus A)) |
| BS 6476-1984 |
服装质量指南和有关英国标准 |
(Guide to garment quality and relevant British Standards) |
| BS 6478-1984 |
图书馆与文献工作的新书通报归档指南 |
(Guide to filing bibliographic information in libraries and documentation) |
| BS 648-1964 |
建筑材料重量一览表 |
(Schedule of weights of building materials) |
| BS 6480-1988 |
额定电压在33KV及以下的铅与铅合金护套电缆规范 |
(Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V) |
| BS 6481-1984 |
火焰淬火或感应淬火后钢淬火有效深度的测定方法 |
(Method for determination of effective depth of hardening of steel after flame or induction hardening) |
| BS 6483-1-1984 |
化肥撒播器.第1部分:在实验室和田间条件下使用性能的评价方法 |
(Fertilizer distributors - Methods of evaluating performance under laboratory and field conditions) |
| BS 6483-2-1985 |
化肥撒播器.第2部分:化肥直线撒播器的试验方法 |
(Fertilizer distributors - Method of test for fertilizer distributors in lines) |
| BS 6485-1999 |
架空动力线用PVC覆盖导体 |
(PVC-covered conductors for overhead power lines) |
| BS 6487-1984 |
螺拴、螺钉和双头螺栓的开口销孔与保险孔 |
(Specification for split pin holes and wire holes in bolts, screws and studs) |
| BS 6490-1984 |
土方机械用防松螺栓头的外形和尺寸(不包括螺纹尺寸)规范 |
(Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery) |
| BS 6491 Pt.1-1984 |
工业机器的电感安全系统.第1部分:一般要求规范 |
(Electro-sensitive safety systems for industrial machines. Specification for general requirements) |
| BS 6491 Pt.2-1987 |
工业机器的电感安全系统.第2部分:特殊要求(包括光电传感器)规范 |
(Electro-sensitive safety systems for industrial machines. Specification for particular requirements for an electro-sensitive safety system incorporating a photoelectric sensing unit(s)) |
| BS 6493-1.1-1984 |
半导体器件.分立器件.总则 |
(Semiconductor devices - Discrete devices - General) |
| BS 6493-1.3-1986 |
半导体器件.分立器件.信号(包括开关)和调节二极管推荐规范 |
(Semiconductor devices - Discrete devices - Recommendations for signal (including switching) and regulator diodes) |
| BS 6493-2.3-1987 |
半导体器件.集成电路.模拟集成电路推荐规范 |
(Semiconductor devices - Integrated circuits - Recommendations for analogue integrated circuits) |
| BS 6494-4-1989 |
液压阀的安装面.第4部分:03和05规格的四孔组件排气阀、模数组阀和方向控制阀夹紧尺寸规范 |
(Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves) |
| BS 6496-1984 |
施加并焙固于铝合金的挤压材、板材和预成型材(外部建筑用)上的粉末有机涂层和带有粉末有机涂层的铝合金挤压 |
() |
| BS 6497-1984 |
施加并焙固于热浸镀锌的热轧型钢和预成型钢(窗及其外部建筑用)的粉末有机涂层和带有粉末有机涂层的镀锌型钢 |
() |
| BS 6498-2002 |
可用于作证的缩微胶卷与其他缩微胶片的制备指南 |
(Guide to preparation of microfilm and other microforms that may be required as evidence) |
| BS 6499-1998 |
金属容器的金属螺旋颈口、盖和内部密封规范 |
(Metal screw necks, screw caps and inner seals for metal containers - Specification) |
| BS 65-1991 |
只应用于地表水管道和配件的陶管、配件、导管和挠性机械接头规范 |
(Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings) |
| BS 6500-2000 |
电缆.家庭,办公室和类似环境的装置和设备使用的额定电压达300/500V的柔性电缆 |
(Electric cables - Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments) |
| BS 6501-1-2004 |
金属软管组件.波纹形软管组件的构造和使用指南 |
|
| BS 6501-2-1991 |
挠性金属软管组件.第2部分:带绕软管和软管组合件规范 |
(Flexible metallic hose assemblies - Specification for strip wound hoses and hose assemblies) |
| BS 6502-1984 |
使用β型 12.65mm(0.5in)磁带的螺旋扫描卡式录像带系统规范 |
(Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type Beta format) |
| BS 6504-1984 |
纸、纸板吸水率的测定方法(克莱姆法) |
(Method for determination of water absorption of paper and board (Klemm method)) |
| BS 6508-1984 |
农业拖拉机和机具履带宽度推荐规范 |
(Recommendations for track widths for agricultural tractors and machinery) |
| BS 6509-1984 |
农业拖拉机三点连杆机构的空隙区域规范 |
(Specification for clearance zone on implements for the three-point linkage to agricultural tractors) |
| BS 6510-1984 |
钢窗、梁、窗台板与门规范 |
(Specification for steel windows, sills, window boards and doors) |
| BS 6511-1984 |
工业用金属筛板穿孔标志规范 |
(Specification for designation of perforations in industrial plate screens) |
| BS 6513-1-1984 |
敷设宽带电缆的分布系统.第1部分:术语规范 |
(Wideband cabled distribution systems - Glossary of terms) |
| BS 6513-2-1984 |
敷设宽带电缆的分布系统.第2部分:测量方法 |
(Wideband cabled distribution systems - Methods of measurement) |
| BS 6513-4-1984 |
宽谱带电缆的分配系统.第4部分:逆向电视机性能要求规范 |
(Wideband cabled distribution systems - Specification for performance requirements, for upstream television) |
| BS 6513-5-1987 |
敷设宽带电缆的分配系统.第5部分:单向和相互作用的数据维护的推荐规范 |
(Wideband cabled distribution systems - Recommendations for one-way and interactive data services) |
| BS 6515-1984 |
圬工用防潮聚乙烯层规范 |
(Specification for polyethylene damp-proof courses for masonry) |
| BS 6518-1984 |
工业用低压开关设备和控制装置规范.控制开关.位置开关42.5X80.尺寸和特性 |
(Specification for low voltage switchgear and controlgear for industrial use - Control switches - Position switches 42.5 x 80 - Dimensions and characteristics) |
| BS 6519-1984 |
工业用低压开关设备与控制装置规范.感应式近距离开关.连接的标示 |
(Specification for low voltage switchgear and controlgear for industrial use - Inductive proximity switches - Identifications of connections) |
| BS 6520-1984 |
工业用低压开关设备和控制装置规范.控制开关.位置开关35X55.尺寸性能 |
(Specification for low voltage switchgear and controlgear for industrial use - Control switches - Position switches 30 x 55 - Dimensions and characteristics) |
| BS 6521-1984 |
校准圆钢链节起重链正常使用和维修导则 |
(Guide for proper use and maintenance of calibrated round steel link lifting chains) |
| BS 6522-1984 |
绝缘油的水饱和百分比的测定方法 |
(Methods for determination of percentage water saturation of insulating oil) |
| BS 6523-1984 |
实验室用玻璃烧杯规范 |
(Specification for glass beakers for laboratory use) |
| BS 6524-1984 |
纺织织物表面电阻率的测定方法 |
(Method for determination of the surface resistivity of a textile fabric) |
| BS 6525-1984 |
液压油系统的储油器的设计与结构规范 |
(Specification for design and construction of reservoirs used in hydraulic fluid power systems) |
| BS 6526-1998 |
家用炉手套规范.试验方法和要求 |
(Domestic oven gloves - Requirements and test methods) |
| BS 6528-1984 |
圆柱螺钉螺纹的术语词汇 |
(Glossary of terms for cylindrical screw threads) |
| BS 6529-1984 |
审读文献、确定它们的主题及选定主题词推荐规范 |
(Recommendations for examining documents, determining their subjects and selecting indexing terms) |
| BS 6533-1984 |
用浓无机酸腐蚀对钢进行宏观检验的指南 |
(Guide to macroscopic examination of steel by etching with strong mineral acids) |
| BS 6534-1984 |
锡涂料中铅的定量测定方法 |
(Method for quantitative determination of lead in tin coatings) |
| BS 6537-1984 |
液压设备用 U型接头规范 |
(Specification for staple type connectors for hydraulic fluid power applications) |
| BS 6538-1-1985 |
纸、纸板的空气磁导.第1部分:测定空气磁导的一般方法:试验的概述 |
(Air permeance of paper and board - Method for determination of air permeance: general aspects of testing) |
| BS 6538-2-1992 |
纸和纸板的透气性.使用Bendtsen仪表测定透气性的方法 |
(Air permeance of paper and board - Method for determination of air permeance using the Bendtsen apparatus) |
| BS 6538-3-1987 |
纸、纸板的空气磁导.第3部分:使用格利(Guley)装置测定空气磁导的方法 |
(Air permeance of paper and board - Method for determination of air permeance using the Gurley apparatus) |
| BS 6542-1-1984 |
信息交换用软盘盒的文件结构和标记.第1部分:信息交换用软盘标记和文档结构规范 |
(File structure and labelling of flexible disk cartridges for information interchange - Specification for sequential file allocation structure) |
| BS 6542-2-1988 |
信息交换用软盘盒的文件结构和标记.第2部分:可变件分配结构规范 |
(File structure and labelling of flexible disk cartridges for information interchange - Specification for variable file allocation structure) |
| BS 6543-1985 |
建筑和土木工程中工业副产品和废料利用指南 |
(Guide to use of industrial by-products and waste materials in building and civil engineering) |
| BS 6544-1984 |
土方机械推土机端铲孔规范 |
(Specification for holes in dozer end bits for earth moving machinery) |
| BS 6548-2-1992 |
设备的可保养性.在设计阶段对设备的可保养性研究指南 |
(Maintainability of equipment - Guide to maintainability studies during the design phase) |
| BS 6548-3-1992 |
设备的可保养性.可保养性、验证和可保养性数据的选择.分析与表达法的指南 |
(Maintainability of equipment - Guide to maintainability, verification and the collection, analysis and presentation of maintainability data) |
| BS 6548-4-1993 |
设备的维修性.第4部分:维护和维护支持计划导则 |
(Maintainability of equipment - Guide to the planning of maintenance and maintenance support) |
| BS 6548-5-1995 |
设备维修性.第5部分:诊断试验导则 |
(Maintainability of equipment - Guide to diagnostic testing) |
| BS 6548-6-1995 |
设备的可维护性.可维护性评定统计方法指南 |
(Maintainability of equipment - Guide to statistical methods in maintainability evaluation) |
| BS 6550-1985 |
播种、耕作、施用化肥和喷撒设备工作的宽度推荐规范 |
(Recommendation for working widths of equipment for sowing, planting, distributing fertilizers and spraying) |
| BS 6553-1984 |
变电器电路设备用高压熔断丝熔断片的选择导则 |
(Guide for selection of fuse links of high-voltage fuses for transformer circuit applications) |
| BS 6554-1-1984 |
通信和电子设备用变压器和感应器的叠片.第1部分:尺寸、机械特性和电气试验规范 |
(Laminations for transformers and inductors for use in telecommunication and electronic equipment - Specification for dimensions, mechanical characteristics and electrical testing) |
| BS 6556-1-1985 |
煤矿用低速数字信号.第1部分:光耦合规范 |
(Low speed digital signals for use in coal mines - Specification for optical coupling) |
| BS 6556-2-1985 |
煤矿用低速数字信号.第2部分:变压器耦合规范 |
(Low speed digital signals for use in coal mines - Specification for transformer coupling) |
| BS 6556-3-1985 |
煤矿用低速数字信号.第3部分:信息协议规范 |
(Low speed digital signals for use in coal mines - Specification for message protocols) |
| BS 6559-1985 |
导则.木材防腐剂的欧洲(或CEN)试验方法文献总论 |
(Guide - General introductory document on European (or CEN) methods of test for wood preservatives) |
| BS 6563-1985 |
使用帕克·印痕-surf仪测定纸和纸板粗糙度的方法 |
(Method for determination of the roughness of paper and board by the Parker Print-surf apparatus) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com