标准号 |
中文名称 |
英文名称 |
| BS 1554-1990 |
不锈钢和耐热钢圆钢丝规范 |
(Specification for stainless and heat-resisting steel round wire) |
| BS 1560-3.1-1989 |
管道、阀门和管件用圆法兰(特定类别).钢、铸铁和铜合金法兰.钢法兰规范 |
(Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for steel flanges) |
| BS 1560-3.2-1990 |
管子、阀门和配件(规定类型)用圆法兰.第3部分:钢、铸铁和铜合金法兰.第2节:铸铁法兰规范 |
(Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges) |
| BS 1560-3.3-1989 |
管子、阀门和配件(规定类型)用圆法兰.第3部分:钢、铸铁和铜合金法兰.第3节:铜合金和复合法兰规范 |
(Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for copper alloy and composite flanges) |
| BS 1561-1966 |
电镀用银阳极与银盐规范 |
(Specification for silver anodes and silver salts for electroplating) |
| BS 1562-2-1973 |
农用割草机与联合收割机零件规范.米制件 |
(Specification for agricultural mower and combine-harvester parts - Metric units) |
| BS 1563-1949 |
规范.铸铁拼合箱(矩形) |
(Specification - Cast iron sectional tanks (rectangular)) |
| BS 1564-1975 |
压制钢拼合矩形箱规范 |
(Specification for pressed steel sectional rectangular tanks) |
| BS 1565-1-1949 |
环型或马鞍型镀锌低碳钢间接热水罐规范.第1部分:英制单位 |
(Specification for galvanized mild steel indirect cylinders, annular or saddle-back type. Imperial units) |
| BS 1565-2-1973 |
环型或马鞍型镀锌低碳钢间接热水罐规范.第2部分:米制单位 |
(Specification for galvanized mild steel indirect cylinders, annular or saddle-back type. Metric units) |
| BS 1566-1-2002 |
家用铜制间接热水罐.开口式铜制热水罐.要求和试验方法 |
(Copper indirect cylinders for domestic purposes - Open vented copper cylinders - Requirements and test methods) |
| BS 1566-2-1984 |
家用铜制间接热水罐.单管道的间接热水罐规范 |
(Copper indirect cylinders for domestic purposes - Specification for single feed indirect cylinders) |
| BS 1567-1953 |
木门框与衬边规范 |
(Specification for wood door frames and linings) |
| BS 1571-2-1975 |
容积式压缩机与排气机的试验.第2部分:空气压缩机与排气机的简化验收方法 |
(Specification for testing of positive displacement compressors and exhausters - Methods for simplified acceptance testing for air compressors and exhausters) |
| BS 1574-1994 |
开口销规范(英制系列) |
(Specification for split pins (inch series)) |
| BS 1580 Pts.1 and 2-1962 |
统一螺纹规范.直径为1/4英寸及更大 |
(Specification for Unified screw threads - Diameters) |
| BS 1580-3-1965 |
统一螺纹规范.第3部分:直径小于1/4英寸 |
(Specification for Unified screw threads - Diameters below) |
| BS 1583-1986 |
单刻度移液管规范 |
(Specification for one-mark pipettes) |
| BS 1586-1982 |
制冷剂冷凝设备性能试验与性能数据表示方法 |
(Methods for performance testing and presentation of performance data for refrigerant condensing units) |
| BS 159-1992 |
高压母线和母线连接规范 |
(Specification for high-voltage busbars and busbar connections) |
| BS 1591-1975 |
耐蚀高硅铸铁件规范 |
(Specification for corrosion resisting high silicon iron castings) |
| BS 1595-1-1986 |
工业用异丙醇.第1部分:异丙醇规范 |
(Propan-2-ol (isopropyl alcohol) for industrial use - Specification for propan-2-ol (isopropyl alcohol)) |
| BS 1595-2-1984 |
工业用异丙醇.第2部分:试验方法 |
(Propan-2-ol (isopropyl alcohol) for industrial use - Methods of test) |
| BS 1596-1992 |
纤维板圆筒规范 |
(Specification for fibreboard drums) |
| BS 1597-1985 |
船用设备的电磁干扰的限制与测量方法规范 |
(Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installations) |
| BS 16-1974 |
电信器材( 绝缘子、电杆附件等)规范 |
(Specification for telegraph material (insulators, pole fittings, etc.)) |
| BS 1600-1992 |
石油工业用钢管尺寸规范 |
(Specification for dimensions of steel pipe for the petroleum industry) |
| BS 1608-1990 |
电动制冷剂冷凝设备规范 |
(Specification for electrically driven refrigerant condensing units) |
| BS 1619-2-1988 |
可反复使用的胰岛素注射用皮下注射器.第2部分:每毫升100单位浓度的胰岛素注射器规范 |
(Re-usable hypodermic syringes for insulin injection - Specification for syringes for use with insulin of strength 100 units per millilitre) |
| BS 1622-1989 |
摊铺机冬季保养规范 |
(Specification for spreaders for winter maintenance) |
| BS 1625-6 and 4830-1972 |
轻质、中质和重质机织棉带规范 |
(Specifications for woven cotton tapes, light, medium and heavy qualities) |
| BS 1629-1989 |
出版文献资料查阅方法推荐标准 |
(Recommendation for references to published materials) |
| BS 1635-1990 |
防火图纸的图形符号与缩写推荐标准 |
(Recommendations for graphic symbols and abbreviations for fire protection drawings) |
| BS 1640-1-1962 |
石油工业用钢质对焊管配件规范.第1部分:锻制碳钢与铁氧体合金钢配件 |
(Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings) |
| BS 1640-2-1962 |
石油工业用钢质对接焊管配件规范.锻制和铸制奥氏体铬镍钢配件 |
(Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings) |
| BS 1640-3-1968 |
石油工业用钢质对接焊管配件规范.锻制碳钢与铁素体合金钢配件:米制件 |
(Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings - Metric units) |
| BS 1640-4-1968 |
石油工业用钢质对焊管配件规范.第4部分:锻制和铸制奥氏体铬镍钢配件:米制件 |
(Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings - Metric units) |
| BS 1643-1983 |
精密游标高度规规范 |
(Specification for precision vernier height gauges) |
| BS 1646-1-1979 |
过程测量控制功能和设备的符号表示.第1部分:基本要求 |
(Symbolic representation for process measurement control functions and instrumentation - Basic requirements) |
| BS 1646-2-1983 |
过程测量控制功能和设备的符号表示.第2部分:附加基本要求规范 |
(Symbolic representation for process measurement control functions and instrumentation - Specification for additional basic requirements) |
| BS 1646-3-1984 |
过程测量控制功能和仪器的符号表示.第3部分:仪器接线图的详细图形符号规范 |
(Symbolic representation for process measurement control functions and instrumentation - Specification for detailed symbols for instrument interconnection diagrams) |
| BS 1646-4-1984 |
过程测量控制功能和仪器的符号表示.第4部分:过程计算机、接口、共享显示和控制功能的基本符号规范 |
(Symbolic representation for process measurement control functions and instrumentation - Specification for basic symbols for process computer, interface and shared display/control functions) |
| BS 1647-1-1984 |
pH值测量.第1部分:pH值标度规范 |
(pH measurement - Specification for pH scale) |
| BS 1647-2-1984 |
pH值测量.第2部分:参考值标准溶液和工作参考标准溶液规范 |
(pH measurement - Specification for reference value standard solutions and operational reference standard solutions) |
| BS 1655-1950 |
过程控制工业用法兰连接自动控制阀(面至面尺寸)规范 |
(Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)) |
| BS 1657-1950 |
锯齿形螺纹规范 |
(Specification for buttress threads) |
| BS 1659-1950 |
铁路信号设备用衔铁上升式直流中性线轨道继电器和线路继电器规范 |
(Specification for tractive armature direct current neutral track and line relays for railway signalling) |
| BS 1660-1-1992 |
机器用圆锥工具.第1部分:自动夹紧的(莫氏锥度和5%米制锥度)圆锥工具柄和套筒规范 |
(Machine tapers - Specification for shanks and sockets with self-holding tapers (Morse and metric 5%)) |
| BS 1660-10-1988 |
机用锥销.第10部分:钻头卡盘(雅可布和短莫氏)圆锥规范 |
(Machine tapers - Specification for drill chuck tapers (Jacob and short Morse)) |
| BS 1660-11-1991 |
机用锥销.第11部分:量规规范 |
(Machine tapers - Specification for gauges) |
| BS 1660-12-1996 |
机床.莫氏锥度强制传动规范 |
(Machine tapers - Specification for positive drive of Morse tapers) |
| BS 1660-2-1988 |
机用锥销.第2部分:莫氏锥柄刀具用异径套管和伸缩套筒规范 |
(Machine tapers - Specification for reduction sleeves and extension sockets for tools with Morse taper shanks) |
| BS 1660-3-1988 |
机用锥销.第3部分:莫氏锥柄刀具用锥端六角套筒和异径套管规范 |
(Machine tapers - Specification for turret sockets and reduction sleeves with tapped ends for tools with Morse taper shanks) |
| BS 1660-4-1989 |
机用锥销.第4部分:自动松放的7/24锥度轴头和刀具柄规范 |
(Machine tapers - Specification for spindle noses and tool shanks with self-release 7/24 tapers) |
| BS 1660-5-1996 |
机用锥销.第5部分:7/24内、外锥度的适配器规范 |
(Machine tapers - Specification for reduction sleeves with external and internal 7/24 tapers) |
| BS 1660-6-1988 |
机用锥销.第6部分:莫氏锥柄的刀具用7/24外锥度的适配器规范 |
(Machine tapers - Specification for adaptors with external 7/24 tapers for tools with Morse taper shanks) |
| BS 1660-7-1988 |
机用锥销.第7部分:莫氏锥柄刀具用7/24外锥度的伸缩适配器规范 |
(Machine tapers - Specification for extension adaptors with external 7/24 tapers for tools with Morse taper shanks) |
| BS 1660-9-1988 |
机用锥销.第9部分:销槽规范 |
(Machine tapers - Specification for cotter slots) |
| BS 1664-8-1974 |
五种质量的机织棉带规范 |
(Specifications for woven cotton webbings of five qualities) |
| BS 1676-1970 |
焦油和沥青用加热器(移动式和可搬运的)规范 |
(Specification for heaters for tar and bitumen (mobile and transportable)) |
| BS 1679-1-1976 |
药剂容器规范.第1部分:条状折叠纸板盒 |
(Specification for containers for pharmaceutical dispensing - Paperboard containers for strip and blister packs) |
| BS 1679-5-1973 |
药剂配发容器规范.第5部分:眼药水点滴瓶规范 |
(Containers for pharmaceutical dispensing - Eye dropper bottles) |
| BS 1679-6-1994 |
药剂容器.玻璃药瓶规范 |
(Containers for pharmaceutical dispensing - Specification for glass medicine bottles) |
| BS 1679-7-1968 |
药剂容器规范.第7部分:椭圆肋形玻璃瓶 |
(Specification for containers for pharmaceutical dispensing - Ribbed oval glass bottles) |
| BS 1679-8-1992 |
药剂容器.固体剂型、半固体型和粉末状药剂用玻璃和塑料容器规范 |
(Containers for pharmaceutical dispensing - Specification for glass and plastics containers for solid dosage forms, semi-solids and powders) |
| BS 1683-1987 |
加工乳酪包装用铝箔规范 |
(Specification for coated aluminium foil for wrapping processed cheese) |
| BS 1685-1951 |
斜量角规(机械与光学式)规范 |
(Specification for bevel protractors (mechanical and optical)) |
| BS 1692-1998 |
单轮滑车规范 |
(Specification for gin blocks) |
| BS 1694-1990 |
医院儿科病床规范 |
(Specification for hospital ward cots for children) |
| BS 1702-1950 |
低碳钢圆筒(重型:端盖固定的)规范 |
(Specification for mild steel drums (heavy duty - fixed ends)) |
| BS 1703-1977 |
垃圾道和垃圾斗规范 |
(Specification for refuse chutes and hoppers) |
| BS 1704-1985 |
普通固体杆式温度计规范 |
(Specification for solid-stem general purpose thermometers) |
| BS 1707-1990 |
路面修整用热粘结料洒布机规范 |
(Specification for hot binder distributors for road surface dressing) |
| BS 1710-1984 |
管道和服务设施的标志规范 |
(Specification for identification of pipelines and services) |
| BS 1711-1975 |
硬质橡胶地板覆盖物规范 |
(Specification for solid rubber flooring) |
| BS 1715-1-1991 |
肥皂的分析.第1部分:合成阴离子表面活性剂的一般介绍、取样和存在度试验 |
(Analysis of soaps - General introduction, sampling, and test for presence of synthetic anionic-active surface active agents) |
| BS 1715-2.1-1989 |
肥皂的分析.肥皂和肥皂粉的分析方法.第2部分:定量试验方法.第1节:全碱含量和全脂肪物质含量的测定方法 |
(Analysis of soaps - Quantitative test methods - Method for determination of total alkali content and total fatty matter content) |
| BS 1715-2.11-1989 |
肥皂的分析.肥皂和肥皂粉的分析方法.第2部分:定量试验方法.第11节:乙醇不溶物质含量的测定方法 |
(Analysis of soaps - Quantitative test methods - Method for determination of ethanol-insoluble matter content) |
| BS 1715-2.2-1989 |
肥皂的分析.第2部分:定量试验方法.第2节:全游离碱含量的测定方法 |
(Analysis of soaps - Quantitative test methods - Method for determination of total free alkali content) |
| BS 1715-2.3-1989 |
肥皂的分析.肥皂和肥皂粉的分析方法.第2部分:定量试验方法.第3节:游离苛性碱含量的测定方法 |
(Analysis of soaps - Quantitative test methods - Method for determination of free caustic alkali content) |
| BS 1715-2.4-1990 |
肥皂的分析.肥皂和肥皂粉的分析方法.第2部分:定量试验方法.第4节:游离脂肪酸含量的测定方法 |
(Analysis of soaps - Quantitative test methods - Method for determination of free fatty acids content) |
| BS 1715-2.5-1989 |
肥皂的分析.肥皂和肥皂粉的分析方法.第2部分:定量试验方法.第5节:不可皂化物质、未皂化物质和未皂化的可皂 |
(Analysis of soaps - Quantitative test methods - Method for determination of unsaponifiable, unsaponified, and unsaponified saponifiable matter contents) |
| BS 1715-2.6-1989 |
肥皂的分析.肥皂和肥皂粉的分析方法.第2部分:定量试验方法.第6节:水分和挥发物含量的测定方法 |
(Analysis of soaps - Quantitative test methods - Method for determination of moisture and volatile matter content) |
| BS 1715-2.7-1989 |
肥皂的分析.肥皂和肥皂粉的分析方法.第2部分:定量试验方法.第7节:氯化物含量的测定方法 |
(Analysis of soaps - Quantitative test methods - Method for determination of chloride content) |
| BS 1715-2.8-1989 |
肥皂的分析.肥皂和肥皂粉的分析方法.第2部分:定量试验方法.第8节:甘油含量的测定方法 |
(Analysis of soaps - Quantitative test methods - Method for determination of glycerol content) |
| BS 1715-2.9-1990 |
肥皂的分析.第2部分:定量试验方法.第9节:乙二胺四乙酸(EDTA)含量的测定方法 |
(Analysis of soaps - Quantitative test methods - Method for determination of EDTA content) |
| BS 1717-1983 |
自行车和机动脚踏车车用钢管规范 |
(Specification for steel tubes for cycle and motor cycle purposes) |
| BS 1722-1-1999 |
栅栏.链条链接栅栏规范 |
(Fences - Specification for chain link fences) |
| BS 1722-10-1999 |
栅栏.链条链接和焊接筛网的防止进入的栅栏规范 |
(Fences - Specification for anti-intruder fences in chain link and welded mesh) |
| BS 1722-11-2000 |
栅栏.预制木板栅栏规范 |
(Fences - Specification for prefabricated wood panel fences) |
| BS 1722-12-1999 |
栅栏.钢栅栏规范 |
(Fences - Specification for steel palisade fences) |
| BS 1722-13-1978 |
栅栏.第13部分:围网球场用的链环栅栏 |
(Fences - Chain link fences for tennis court surrounds) |
| BS 1722-14-2001 |
栅栏.开放筛网钢片栅栏规范 |
(Fences - Specification for open mesh steel panel fences) |
| BS 1722-16-1992 |
栅栏.第16部分:用作件和网格塑料面层的有机粉末涂覆物的规范 |
(Fences - Specification for organic powder coatings to be used as a plastics finish to components and mesh) |
| BS 1722-2-2000 |
栅栏.应变金属丝和金属丝网栅栏规范 |
(Fences - Specification for strained wire and wire mesh netting fences) |
| BS 1722-4-1986 |
栅栏.第4部分:劈开的栗木板条栅栏规范 |
(Fences - Specification for cleft chestnut pale fences) |
| BS 1722-5-1999 |
栏栅.鱼鳞板围栏和木质栅栏栏栅的规范 |
(Fences - Specification for close-boarded and wooden palisade fences) |
| BS 1722-7-1999 |
栏栅.木柱和铁轨栏栅的规格 |
(Fences - Specification for wooden post and rail fences) |
| BS 1722-8-1997 |
栅栏.低碳钢条连续编结的栅栏规范 |
(Fences - Specification for mild steel (low carbon steel) continuous bar fences and hurdles) |
| BS 1722-9-2000 |
栅栏.带圆形或方形竖杆和扁平横杆的低碳钢栅栏规范 |
(Fences - Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals) |
| BS 1723-1-1986 |
钎焊.第1部分:钎焊规范 |
(Brazing - Specification for brazing) |
| BS 1723-2-1986 |
钎焊.第2部分:钎焊指南 |
(Brazing - Guide to brazing) |
| BS 1724-1990 |
青铜焊料气焊规范 |
(Specification for bronze welding by gas) |
| BS 1726-1-2002 |
用圆形线材和棒材制作的圆柱形螺旋弹簧.规格、公差和测试指南.压力弹簧 |
(Cylindrical helical springs made from round wire and bar - Guide to methods of specifying, tolerances and testing - Compression springs) |
| BS 1726-2-2002 |
用圆形线材和棒材制作的圆柱形螺旋弹簧.规格、公差和测试指南.拉伸弹簧 |
(Cylindrical helical springs made from round wire and bar - Guide to methods of specifying, tolerances and testing - Extension springs) |
| BS 1726-3-2002 |
用圆形线材和棒材制作的圆柱形螺旋弹簧.规格、公差和测试指南.扭转弹簧 |
(Cylindrical helical springs made from round wire and bar - Guide to methods of specifying, tolerances and testing - Torsion springs) |
| BS 1727-1987 |
电瓶车用电机规范 |
(Specification for motors for battery operated vehicles) |
| BS 1728-1-1951 |
铝与铝合金的分析方法.第1部分:铜的测定 |
(Methods for the analysis of aluminium and aluminium alloys - Determination of copper) |
| BS 1728-10-1957 |
铝与铝合金的分析方法.第10部分:锰的测定(吸收测量法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of manganese (absorptiometric method)) |
| BS 1728-11-1960 |
铝与铝合金的分析方法.第11部分:硅的测定(过氯酸法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of silicon (perchloric acid method)) |
| BS 1728-12-1961 |
铝与铝合金的分析方法.第12部分:硅的测定(钼蓝吸收测定法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of silicon (absorptiometric molybdenum blue method)) |
| BS 1728-14-1965 |
铝与铝合金的分析方法.第14部分:镍的测定(重量法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of nickel (gravimetric method)) |
| BS 1728-15-1966 |
铝与铝合金的分析方法.第15部分:镍的测定(光度测量法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of nickel (photometric method)) |
| BS 1728-16-1968 |
铝与铝合金的分析方法.第16部分:铬的测定(光度测量法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (photometric method)) |
| BS 1728-17-1968 |
铝与铝合金的分析方法.第17部分:铬的测定(容量法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (volumetric method)) |
| BS 1728-18-1970 |
铝与铝合金的分析方法.第18部分:锌的测定(EDTA离子交换容量法或极谱法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of zinc (ion-exchange-volumetric EDTA or polarographic method)) |
| BS 1728-19-1971 |
铝与铝合金的分析方法.测定镁(原子吸收法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of magnesium (atomic absorption method)) |
| BS 1728-1971 |
铝与铝合金的分析方法.第19部分:锰的测定(原子吸收法) |
(Methods for the analysis of aluminium and aluminium alloys. Determination of magnesium (atomic absorption method)) |
| BS 1728-20-1971 |
铝与铝合金的分析方法.第20部分:铅的测定(原子吸收法) |
(Methods for the analysis of aluminium and aluminium alloys - Determination of lead (atomic absorption method)) |
| BS 1728-21-1973 |
铝与铝合金的分析方法.第21部分:锌(原子吸收法) |
(Methods for the analysis of aluminium and aluminium alloys - Zinc (atomic absorption method)) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com