标准号 |
中文名称 |
英文名称 |
| BS EN 230-1991 |
整体燃油器规范.安全、控制和调节装置以及安全使用寿命 |
(Specification for monobloc oil burners - Safety, control and regulation devices and safety times) |
| BS EN 230-2005 |
燃油器用自动燃烧器控制系统 |
|
| BS EN 23015-1995 |
石油产品.混浊点测定 |
(Petroleum products - Determination of cloud point) |
| BS EN 23035-1994 |
单面和单壁瓦楞纤维纸板耐压力的测定 |
(Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance) |
| BS EN 2309-1990 |
实心铆钉孔径规范 |
(Specification for hole sizes for solid rivets) |
| BS EN 2310-1991 |
非金属材料阻燃额定值的试验方法 |
(Test methods for the flame resistance rating of non-metallic materials) |
| BS EN 2311-1990 |
具有自润滑衬套的轴套筒的规范.技术规范 |
(Specification for bushes with self-lubricating liner - Technical specification) |
| BS EN 2318-1992 |
AL-P2024-T3511铝合金.1,2mm≤a或D≤150mm的挤压棒材和型材 |
(Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm) |
| BS EN 232-2003 |
浴池.连接尺寸 |
(Baths - Connecting dimensions) |
| BS EN 2326-1992 |
AL-P6082-T6铝合金.a或D≤200mm的挤压棒材和型材 |
(Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D) |
| BS EN 2327-1989 |
合金钢径向锯齿锁紧垫圈规范.尺寸 |
(Specification for washers, lock with radial serrations in alloy steel - Dimensions) |
| BS EN 23270-1991 |
色漆、清漆及其原料的调试温度和湿度规范 |
(Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials) |
| BS EN 2328-1990 |
飞行操纵机构用垫片和调整片规范.尺寸 |
(Specification for washers, tab for flight control rods - Dimensions) |
| BS EN 2329-1993 |
纺织玻璃纤维预浸渍.测定单位面积质量的试验方法 |
(Textile glass fibre preimpregnates - Test method for the determination of mass per unit area) |
| BS EN 233-1999 |
卷式壁纸.成品壁纸、乙烯基壁纸和塑料壁纸的规范 |
(Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings) |
| BS EN 2330-1993 |
纺织玻璃纤维预浸渍. 测定挥发物质含量的试验方法 |
(Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter) |
| BS EN 2331-1993 |
纺织玻璃纤维预浸渍.测定单位面积树脂、纤维含量和纤维质量的试验方法 |
(Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area) |
| BS EN 23312-1993 |
绕结金属材料和硬质合金.杨氏模量的测定 |
(Sintered metal materials and hardmetals - Determination of Young modulus) |
| BS EN 2332-1993 |
纺织玻璃纤维预浸渍.测定树脂.流动的试验方法 |
(Textile glass fibre preimpregnates - Test method for the determination of the resin flow) |
| BS EN 23326-1993 |
硬质金属规范.矫顽磁性的测定 |
(Specification for hardmetals - Determination of (the magnetization) coercivity) |
| BS EN 23327-1993 |
硬质合金.横向断裂强度的测定 |
(Hardmetals - Determination of transverse rupture strength) |
| BS EN 2334-1997 |
铝和铝合金用铬硫酸洗液 |
(Chromic-sulphuric acid pickle of aluminium and aluminium alloys) |
| BS EN 2335-1990 |
无沟槽不锈钢轴承关节规范.尺寸和载荷 |
(Specification for bearings-spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads) |
| BS EN 2336-1990 |
带装配槽的钢制轴承关节规范.尺寸和载荷 |
(Specification for bearings-spherical plain in steel with assembly slots - Dimensions and loads) |
| BS EN 23369-1993 |
不透气性烧结金属材料和硬质合金.密度的测定 |
(Impermeable sintered metal materials and hardmetals - Determination of density) |
| BS EN 2337-1996 |
航空和航天.关节轴承.交货技术条件 |
(Spherical plain bearings - Technical specification) |
| BS EN 2338-2001 |
航空航天系列.热轧钛和钛合金薄板材.厚度0.8mm 6mm.尺寸 |
(Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm) |
| BS EN 2339-2001 |
航空航天系列.冷轧钛和钛合金薄板材.厚度0.2mm |
(Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm) |
| BS EN 234-1997 |
卷材式墙面饰层.顺序装饰用墙面饰层规范 |
(Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration) |
| BS EN 2344-2001 |
航空航天系列.耐热合金加工的圆形棒材.直径大于10mm小于180mm.尺寸 |
(Aerospace series - Round bars, machined in heat resisting alloys - Diameter 10 mm) |
| BS EN 2348-1989 |
操纵钢索组件规范.技术规范 |
(Specification for control cable assemblies - Technical specification) |
| BS EN 235-2002 |
墙壁纸.词汇和符号 |
(Wallcoverings - Vocabulary and symbols) |
| BS EN 2350-1991 |
电路断路器.技术规范 |
(Circuit breakers - Technical specification) |
| BS EN 2353-1989 |
防腐钢控制转筒规范.尺寸和荷载 |
(Specification for turnbarrels, control cable in corrosion resisting steel - Dimensions and loads) |
| BS EN 2354-1989 |
防腐钢螺纹有眼端操纵钢索规范.尺寸和负载 |
(Specification for eye-ends, threaded, control cable in corrosion resisting steel - Dimensions and loads) |
| BS EN 2355-1989 |
防腐钢叉端、螺纹、操纵钢索规范.尺寸和负载 |
(Specification for fork-ends, threaded, control cable in corrosion resisting steel - Dimensions and loads) |
| BS EN 2356-1989 |
滚动轴承用防腐钢叉端螺纹操纵钢索规范.尺寸和负载 |
(Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel - Dimensions and loads) |
| BS EN 2357-1989 |
型锻防腐钢螺柱端操纵钢索规范.尺寸和负载 |
(Specification for stud-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2358-1989 |
型锻防腐钢眼端操纵钢索规范.尺寸和负载 |
(Specification for eye-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2359-1989 |
型锻防腐钢叉端操纵钢索规范.尺寸和负载 |
(Specification for fork-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2360-1989 |
型锻防腐钢轴承用叉端操纵钢索规范.尺寸和负载 |
(Specification for fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2361-1989 |
型锻防腐钢双柄球端操纵钢索规范.尺寸和负载 |
(Specification for ball-ends, double shank in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2362-1989 |
型锻防腐钢圆头端操纵钢索规范.尺寸和负载 |
(Specification for ball-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads) |
| BS EN 2363-1989 |
操纵钢索螺套锁紧夹子规范.尺寸 |
(Specification for locking clips for turnbuckles of control cables - Dimensions) |
| BS EN 2364-1989 |
剪切器头销紧公差规范 |
(Specification for pins, shear headed, close tolerance) |
| BS EN 2365-1989 |
铝合金轴环规范 |
(Specification for collars, aluminium alloy) |
| BS EN 23661-1993 |
端吸式离心泵的底板和安装尺寸 |
(End-suction centrifugal pumps - Baseplate and installation dimensions) |
| BS EN 2367-1990 |
EN2573钢制开口销规范 |
(Specification for split pins in steel EN 2573) |
| BS EN 237-1996 |
石油及其产品的试验方法.液态石油产品.汽油.用原子吸收光谱法测定低铅浓度 |
(Methods of test for petroleum and its products - Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry) |
| BS EN 2374-1991 |
玻璃纤维加强的压制件和夹层复合件.试验板的生产 |
(Specification for glass fibre reinforcing mouldings and sandwich composites - Production of test panels) |
| BS EN 2375-1992 |
树脂预浸渍材料.批次抽样方法 |
(Resin preimpregnated materials - Production batch sampling procedure) |
| BS EN 23758-1994 |
纺织品.使用符号的保养标签规则 |
(Textiles - Care labelling code using symbols) |
| BS EN 2377-1989 |
玻璃纤维增强塑料规范.试验方法.表面层间剪切强度测定 |
(Specification for glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strength) |
| BS EN 2378-1995 |
纤维增强塑料.通过浸入测定吸水量 |
(Fibre reinforced plastics - Determination of water absorption by immersion) |
| BS EN 238-1996 |
石油及其产品的试验方法.液态石油产品.汽油.用红外光谱法测定苯含量 |
(Methods of test for petroleum and its products - Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry) |
| BS EN 2381-1992 |
AL-P7009-T7452铝合金.40mm≤a≤150mm的手工锻件 |
(Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm) |
| BS EN 2384-1992 |
AL-P2014-T6511铝合金.a或D≤150mm的挤压棒材和型材 |
(Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D) |
| BS EN 2385-1992 |
AL-P7009-T74511铝合金.a或D≤125mm的挤压棒材和型材 |
(Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D) |
| BS EN 23878-1993 |
硬质合金维氏硬度试验 |
(Hardmetals - Vickers hardness test) |
| BS EN 23907-1993 |
硬质金属碳总含量的测定.重量测定法 |
(Hardmetals - Determination of total carbon content - Gravimetric method) |
| BS EN 23908-1993 |
硬质合金.不溶性(游离)碳含量的测定.重量分析法 |
(Hardmetals - Determination of insoluble (free) carbon content - Gravimetric method) |
| BS EN 23909-1994 |
硬质合金.钴含量的测定.电位滴定法 |
(Hardmetals - Determination of cobalt - Potentiometric method) |
| BS EN 23923-1-1993 |
金属粉末.表观密度的测定.漏斗法 |
(Metallic powders - Determination of apparent density - Funnel method) |
| BS EN 23923-2-1993 |
金属粉末的表观密度的测定.第2部分:斯科特(Scott)容积计法 |
(Metallic powders - Determination of apparent density - Scott volumeter method) |
| BS EN 2395-1994 |
AL-P2014A-T4或T42铝合金.0.4-6mm薄板及带材 |
(Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip 0,4 mm) |
| BS EN 2395-2005 |
航空航天系列.AL-P2014A-T4或T42铝合金.0.4mm≤a≤6mm 薄板和带材 |
|
| BS EN 23954-1993 |
粉末冶金用粉末的取样 |
(Powders for powder metallurgical purposes - Sampling) |
| BS EN 23995-1993 |
金属粉末规范.矩形压坯横向断裂压坯强度的测定 |
(Specification for metallic powders - Determination of green strength by transverse rupture of rectangular compacts) |
| BS EN 24003-1993 |
多孔性烧结金属材料.气泡试验孔隙尺寸的测定 |
(Permeable sintered metal materials - Determination of bubble test pore size) |
| BS EN 24006-1991 |
封闭管首道中液体液量测量.词汇和符号 |
(Measurement of fluid flow in closed conduits - Vocabulary and symbols) |
| BS EN 24015-1992 |
六角头螺栓.B级产品.减缩杆(杆径近似中径) |
(Hexagon head bolts - Product grade B. Reduced shank (shank diameter pitch diameter)) |
| BS EN 241-2000 |
石油及其产品的试验方法.液态石油产品.钠含量的测定.原子吸收分光光度测定法 |
(Methods of test for petroleum and its products - Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method) |
| BS EN 2413-1995 |
镀镉合金钢带肩薄六角头紧公差短螺纹螺栓.等级:1100MPa(室温)/235℃ |
(Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 鳦) |
| BS EN 24178-1981 |
满包运输分发试验中记录信息规范 |
(Specification for information to be recorded in distribution trials involving complete, filled transport packages) |
| BS EN 24180-1-1981 |
满包运输性能试验进度表编制指南.第1部分:一般原理 |
(Guide to compilation of performance test schedules for complete, filled transport packages - General principles) |
| BS EN 24180-2-1981 |
满包运输性能试验进度表编制指南.第2部分:定量数据 |
(Guide to compilation of performance test schedules for complete, filled transport packages - Quantitative data) |
| BS EN 24185-1981 |
封闭管道中流体流量测量.称重法 |
(Measurement of fluid flow in closed conduits - Weighing method) |
| BS EN 2422-2005 |
铝合金AL-P2124-T351.板材.25 mm≤a≤120 mm |
|
| BS EN 2424-1995 |
对航空航天工业产品作标记 |
(Marking of aerospace products) |
| BS EN 24260-1994 |
石油及其产品的试验方法.石油产品和烃类.硫含量的测定.粗油绳燃烧法 |
(Methods of test for petroleum and its products - Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method) |
| BS EN 2428-1995 |
乙丙橡胶(EPM/EPDM).硬度:50 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD) |
| BS EN 2429-1995 |
乙丙橡胶(EPM/EPDM).硬度:60 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD) |
| BS EN 2430-1995 |
乙丙橡胶(EPM/EPDM).硬度:70 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD) |
| BS EN 2431-1995 |
乙丙橡胶(EPM/EPDM).硬度:80 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD) |
| BS EN 2432-1995 |
乙丙橡胶(EPM/EPDM).硬度:90 IRHD |
(Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD) |
| BS EN 2437-2002 |
航空航天系列.铝及铝合金用铬酸盐转化膜(黄色) |
(Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys) |
| BS EN 24489-1993 |
绕结硬质金属的取样和试验 |
(Sintered hardmetals - Sampling and testing) |
| BS EN 24491-1-1993 |
金属粉末.用还原法测定氧含量.第1部分:通则 |
(Metallic powders - Determination of oxygen content by reduction methods - General guidelines) |
| BS EN 24491-4-1993 |
金属粉末.用还原法测定氧含量.第4部分:用还原萃取法测定氧的总含量 |
(Metallic powders - Determination of oxygen content by reduction methods - Total oxygen by reduction-extraction) |
| BS EN 24492-1993 |
不包括硬质金属粉末的金属粉末.压实与绕结尺寸变化的测定 |
(Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering) |
| BS EN 24496-1993 |
金属粉末.铁、铜、锡和青铜粉末中酸不溶物含量的测定 |
(Metallic powders - Determination of acid insoluble content in iron, copper, tin and bronze powders) |
| BS EN 24497-1993 |
金属粉末.用干筛法测定粒度 |
(Metallic powders - Determination of particle size by dry sieving) |
| BS EN 24498-1-1993 |
不包括硬质金属的绕结金属材料的表观硬质度的测定.截面硬度本质均匀的材料 |
(Sintered metal materials, exluding hardmetals - Determination of apparent hardness - Materials of essentially uniform section hardness) |
| BS EN 24499-1993 |
硬质金属规范.显微组织的金相测定 |
(Specification for hardmetals - Metallographic determination of microstructure) |
| BS EN 24501-1994 |
硬质合金.钛含量的测定.过氧化物光度法 |
(Hardmetals - Determination of titanium - Photometric peroxide method) |
| BS EN 24503-1993 |
硬质合金.用X射线荧光分析法对金属素含量的测定.熔化法 |
(Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method) |
| BS EN 24505-1993 |
硬质金属规范.空隙度和游离碳的金相测定 |
(Specification for hardmetals - Metallographic determination of porosity and uncombined carbon) |
| BS EN 24506-1993 |
硬质金属规范.压缩试验 |
(Specification for hardmetals - Compression test) |
| BS EN 246-2003 |
卫生设备用水龙头.流速调节器通用规范 |
(Sanitary tapware - General specifications for flow rate regulators) |
| BS EN 24641-1993 |
吸水和排水用橡胶软管规范 |
(Rubber hoses for water suction and discharge - Specification) |
| BS EN 247-1997 |
热交换器术语 |
(Heat exchangers - Terminology) |
| BS EN 24766-1992 |
一字槽平端紧定螺钉 |
(Slotted set screws with flat point) |
| BS EN 248-2003 |
卫生设备配件.镍铬电镀层的一般规范 |
(Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr) |
| BS EN 2484-1989 |
把图表摄成缩影胶片规范.35mm缩微胶片穿孔卡 |
(Specification for microfilming of drawings - Aperture card for 35 mm microfilm) |
| BS EN 24869-1-1991 |
听力保护器的声衰减.主观测量法 |
(Acoustics - Hearing protectors - Sound attenuation of hearing protectors - Subjective method of measurement) |
| BS EN 24869-3-1994 |
声学.听力保护器.质量检验用耳罩型保护器测量插入损失的简易方法 |
(Acoustics - Hearing protectors - Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes) |
| BS EN 24883-1993 |
硬质金属规范.用X射线荧光分析法对金属素含量的测定.溶液法 |
(Specification for hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method) |
| BS EN 24884-1993 |
硬质金属.利用烧结试块的粉末取样和试验 |
(Hardmetals - Sampling and testing of powders using sintered test pieces) |
| BS EN 2489-1995 |
纤维增强塑料.试验液体影响的测定 |
(Fibre reinforced plastics - Determination of the action of test fluids) |
| BS EN 2491-1997 |
二硫化钼基上的干膜润滑油.涂层法 |
(Molybdenum disulphide dry lubricants - Coating methods) |
| BS EN 24920-1982 |
纺织品.织物耐表面浸湿性的测定(喷雾试验) |
(Textiles - Determination of resistance to surface wetting (spray test) of fabrics) |
| BS EN 24937-1991 |
钢铁.铬含量的测定.电势或目视滴定法 |
(Steel and iron - Determination of chromium content - Potentiometric or visual titration method) |
| BS EN 2495-1991 |
温度补偿的、额定电流不超过25A的单极电路断路器规范.产品标准 |
(Specification for single-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard) |
| BS EN 2497-1990 |
钛与钛合金干喷砂规范 |
(Specification for dry abrasive blasting of titanium and titanium alloys) |
| BS EN 2498-1990 |
具有自润滑衬套和螺纹杆的可自动调心轴套的操纵杆规范.尺寸和规范 |
(Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank - Dimensions and loads) |
| BS EN 2499-1990 |
计算机输出A6缩微平片规范 |
(Specification for computer output microfiche (com) A6 microfiche) |
| BS EN 250-2000 |
呼吸器.开路目备式压缩空气潜水装置的安全要求、试验、标志 |
(Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking) |
| BS EN 2501-1992 |
轴承.有自润滑轴衬和宽内环的耐腐蚀钢球形滑动轴承的尺寸和负荷 |
(Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads) |
| BS EN 25077-1994 |
纺织品.洗涤干燥后尺寸变化的测定 |
(Textiles - Determination of dimensional change in washing and drying) |
| BS EN 251-2003 |
淋浴浅池.连接尺寸 |
(Shower trays - Connecting dimensions) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com