标准号 |
中文名称 |
英文名称 |
| BS ISO 13592-1998 |
小型飞机.汽油发动机用回火火焰控制 |
Small craft - Backfire flame control for petrol engines |
| BS ISO 1361-1998 |
薄金属容器.开顶式二重卷边罐圆形罐头.内径 |
Light-gauge metal containers - Round open-top cans - Internal diameters |
| BS ISO 13616-1998 |
银行业务及有关金融服务.国际银行帐号 |
Banking and related financial services - International bank account number (IBAN) |
| BS ISO 13616-2003 |
银行业务和相关金融服务.国际银行帐号(IBAN) |
(Banking and related financial services - International bank account number (IBAN)) |
| BS ISO 13628-5-2002 |
石油和天然气工业.海底生产系统的设计和操作.海底生产控制系统联系缆 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea umbilicals |
| BS ISO 13628-6-2000 |
石油和天然气工业.海底生产系统的设计和操作.海底生产控制系统的设计和操作 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Design and operation of subsea controls |
| BS ISO 13628-8-2002 |
石油和天然气工业.水下采油系统的设计和操作.海底生产控制系统的遥控运载工具的接口 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems |
| BS ISO 13628-9-2001 |
石油和天然气工业.海底生产系统的设计和运行.远程操作工具(ROT)介入系统 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems |
| BS ISO 13640-2000 |
建筑物建造.接缝产品.试验衬底规范 |
Building construction - Jointing products - Specifications for test substrates |
| BS ISO 13651-1997 |
塑料制品.环氧树脂及有关材料.可皂化氯总含量的测定 |
Plastics - Epoxy resins and related materials - Determination of total saponifiable chlorine |
| BS ISO 13653-1997 |
光学和光学仪器.普通光学试验方法.象场中有关光辉的测量 |
Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field |
| BS ISO 13655-1997 |
制图技术.制图艺术成象用光谱测量和比色的计算 |
Graphic technology - Spectral measurement and colorimetric computation for graphic arts images |
| BS ISO 13656-2000 |
制版技术.过程控制的比色分析法和反射光密度分析法的应用和印刷品和印样的评价 |
Graphic technology - Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs |
| BS ISO 13674-1-2003 |
道路车辆.沿中心驾驶的鉴定试验.摇摆试验 |
(Road vehicles - Test method for the quantification of on-centre handling - Weave test) |
| BS ISO 13678-2001 |
石油和天然气工业.与套管和直管一起使用的螺纹复合物的评价和试验 |
Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe |
| BS ISO 13679-2003 |
石油和天然气工业.套管和管道连接的检验规程 |
Petroleum and natural gas industries - Procedures for testing casing and tubing connections |
| BS ISO 13689-2001 |
冷藏轻碳氢液体.在含液化气体的罐内液体水平的测量.微波型水平量规 |
Refrigerated light hydrocarbon fluids - Measurement of liquid levels in tanks containing liquefied gases - Microwave-type level gauge |
| BS ISO 13690-2000 |
谷类作物,豆科作物和磨制产品.静态批量取样 |
Cereals, pulses and milled products - Sampling of static batches |
| BS ISO 13691-2002 |
石油和天然气工业.高速专用齿轮装置 |
Petroleum and natural gas industries - High-speed special-purpose gear units |
| BS ISO 13704-2002 |
石油和天然气工业.炼油厂中加热器管厚度的校准 |
Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries |
| BS ISO 13715-2004 |
技术制图.非定义形状的边缘.词汇和说明 |
|
| BS ISO 13726-1998 |
液压传动.内径250mm-500mm的16MPa(160bar)压实系列单杆液压缸.附属安装尺寸 |
Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions |
| BS ISO 13737-2004 |
石油及其制品的试验方法.BS 2000-527:石油制品及润滑剂.润滑脂低温针入度的测定 |
|
| BS ISO 13738-2000 |
润滑剂、工业用油和有关制品(L类).E系列(内燃机油).两冲程汽油发动机油规范(类别EGB、EGC和EGD) |
Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) |
| BS ISO 13740-1999 |
原油及石油产品.运输的可计算性.远洋油轮装载和卸载时容器经验参数的评估 |
Crude petroleum and petroleum products - Transfer accountability - Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels |
| BS ISO 13741-1-1998 |
塑料/橡胶.聚合物弥散体和胶乳(天然的和合成的).用毛细管柱气相色谱分析法测定残余单基物和其他有机成分.第1部分:直接液体喷射法 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Direct liquid injection method |
| BS ISO 13741-2-1998 |
塑料/橡胶.聚合物弥散体和胶乳(天然的和合成的).用毛细管柱气相色谱分析法测定残余单基物和其他有机成分.第2部分:液面上法 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Headspace method |
| BS ISO 13746-2001 |
纺织地板覆盖物.铺设及楼梯用指南 |
Textile floor coverings - Guidelines for installation and use on stairs |
| BS ISO 13752-1998 |
空气质量.作为基准使用的第2种现场测量方法的不确定性评定 |
Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference |
| BS ISO 13756-1998 |
银制珠宝合金用银的测定.容量法(电位滴定法)用氯化钠或氯化钾 |
Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride |
| BS ISO 13769-2002 |
气瓶.印花标记 |
Gas cylinders - Stamp marking |
| BS ISO 13772-1997 |
林业机械.便携式链锯.非手动链锯制动器的性能 |
Forestry machinery - Portable chainsaws - Non-manually actuated chain brake performance |
| BS ISO 13774-1999 |
运送内燃机燃料用橡胶和塑料软管.易燃性试验方法 |
Rubber and plastics hoses for fuels for internal combustion engines - Method of test for flammability |
| BS ISO 13775-1-2000 |
汽车用热塑管和软管.非燃料应用 |
Thermoplastic tubing and hoses for automotive use - Non-fuel applications |
| BS ISO 13775-2-2000 |
汽车用热塑管和软管.非燃料应用.石油基质燃料应用 |
Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications |
| BS ISO 13778-1999 |
滑动轴承.薄壁轴瓦的质量保证.窄间隙域轴承的选择组件 |
Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range |
| BS ISO 13779-1-2000 |
外科植入物.羟磷灰石.陶瓷羟磷灰石 |
Impants for surgery - Hydroxyapatite - Ceramic hydroxyapatite |
| BS ISO 13779-2-2000 |
外科植入物.羟磷灰石.羟磷灰石的覆层 |
Impants for surgery - Hydroxyapatite - Coatings of hydroxyapatite |
| BS ISO 13794-1999 |
环境空气.石棉纤维的测定.非直接转换透射电镜法 |
Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method |
| BS ISO 13802-1999 |
塑料.机器摆锤冲击试验的验证.Charpy,Izod和拉伸冲击试验 |
Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing |
| BS ISO 13804-2000 |
铝用玻璃搪瓷.试验样品的生产 |
Vitreous and porcelain enamels for aluminium - Production of specimens for testing |
| BS ISO 13805-2000 |
铝用玻璃搪瓷.在电解溶液的作用下铝上搪瓷粘合的测定. |
Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) |
| BS ISO 13806-2000 |
玻璃质釉和瓷釉.封闭系统的腐蚀试验 |
Vitreous and porcelain enamels - Corrosion tests in closed systems |
| BS ISO 13807-2000 |
玻璃质釉和瓷釉.化学工业用瓷釉的热冲击试验中裂缝形成温度的测定 |
Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry |
| BS ISO 1382-2002 |
橡胶.词汇 |
Rubber - Vocabulary |
| BS ISO 13820-1997 |
纸,纸板和波纹纸板.压缩试验设备的描述和校准 |
Paper, board and corrugated fibreboard - Description and calibration of compression testing equipment |
| BS ISO 13821-2002 |
波纹纸板.耐沿边挤压性的测定.上蜡边法 |
Corrugated fibreboard - Determination of edgewise crush resistance - Waxed edge method |
| BS ISO 13879-2000 |
石油和天然气工业.功能规范的内容和起草 |
Petroleum and natural gas industries - Content and drafting of functional specifications |
| BS ISO 13880-2000 |
石油和天然气工业.技术规范的内容和起草 |
Petroleum and natural gas industries - Content and drafting of a technical specification |
| BS ISO 13884-2003 |
动植物脂肪和油.用红外线光谱测定法测定孤立的反式异构体 |
(Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry) |
| BS ISO 13887-2004 |
增强可成型性高屈服强度的冷轧薄钢板 |
|
| BS ISO 13894-1-2000 |
高压装饰性叠层板材.复合成份.试验方法 |
High-pressure decorative laminates - Composite elements - Test methods |
| BS ISO 13899-2-2005 |
钢.合金钢中Mo、Nb和W含量的测定.感应耦合等离子体原子发射光谱法.Nb含量的测定 |
|
| BS ISO 13909-1-2002 |
硬煤和焦炭.机械取样.一般性说明 |
Hard coal and coke - Mechanical sampling - General introduction |
| BS ISO 13909-2-2002 |
硬煤和焦炭.机械取样.流水线上的取样 |
Hard coal and coke - Mechanical sampling - Sampling from moving streams |
| BS ISO 13909-3-2002 |
硬煤和焦炭.机械取样.固定批量取样 |
Hard coal and coke - Mechanical sampling - Coal - Sampling from stationary lots |
| BS ISO 13909-4-2002 |
硬煤和焦炭.机械取样.煤.试样制备 |
Hard coal and coke - Mechanical sampling - Coal - Preparation of test samples |
| BS ISO 13909-5-2002 |
硬煤和焦炭.机械取样.流水线上的取样 |
Hard coal and coke - Mechanical sampling - Sampling from moving streams |
| BS ISO 13909-6-2002 |
硬煤和焦炭.机械取样.焦炭.试样制备 |
Hard coal and coke - Mechanical sampling - Coke - Preparation of test samples |
| BS ISO 13909-7-2002 |
硬煤和焦炭.机械取样.取样精度测定方法、样品制备和试验 |
Hard coal and coke - Mechanical sampling - Methods for determining the precision of sampling, sample preparation and testing |
| BS ISO 13909-8-2002 |
硬煤和焦炭.机械取样.偏差试验方法 |
Hard coal and coke - Mechanical sampling - Methods of testing for bias |
| BS ISO 13927-2001 |
塑料.用锥形辐射加热器和热电堆探测器进行简单热释放试验 |
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector |
| BS ISO 13942-2003 |
粘合磨料产品.极限偏差和跳动公差 |
(Bonded abrasive products - Limit deviations and run-out tolerances) |
| BS ISO 13953-2001 |
聚乙烯管和配件.从对焊接头测定抗拉强度和试样的断裂形式 |
Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| BS ISO 13964-1998 |
空气质量.大气中臭氧的测定.紫外线光度计法 |
Air quality - Determination of ozone in ambient air - Ultraviolet photometric method |
| BS ISO 13976-2005 |
结构质量和特厚的成卷热轧钢薄板 |
|
| BS ISO 13994-1998 |
防液体化合物的防护服装.防护服装材料在压力下防液体渗透的阻力测定 |
Clothing for protection against liquid chemicals - Determination of the resistance of protective clothing materials to penetration by liquids under pressure |
| BS ISO 13999-1-1999 |
防护服装.防止刀切伤和割伤的手套和胳膊护套.第1部分:链递手套和胳膊护套 |
Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives. Chain-mail gloves and arm guards |
| BS ISO 14004-1996 |
环境管理系统.原理,系统和技术支持用通用指南 |
Environmental management systems - General guidelines on principles, systems and supporting techniques |
| BS ISO 14004-2004 |
环境管理系统.原理、系统和技术支持用通用指南 |
|
| BS ISO 14015-2001 |
环境管理.场所和组织机构的环境评定 |
Environmental management - Environmental assessment of sites and organizations (EASO) |
| BS ISO 14021-1999 |
环境标签和说明.自宣告环境要求(II型环境标签) |
Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling) |
| BS ISO 14024-1999 |
环境标签和声明:I型环境标签.规则和过程 |
Environmental labels and declarations. Type I environmental labelling. Principles and procedures |
| BS ISO 14050-1998 |
环境管理.词汇 |
Environmental management - Vocabulary |
| BS ISO 14135-1-2005 |
光学及光学仪器.望远镜瞄准具规范.通用仪器 |
|
| BS ISO 14135-2-2005 |
光学及光学仪器.望远镜瞄准具规范.高性能仪器 |
|
| BS ISO 14137-2000 |
机床.金属线放电加工机床的试验条件.术语和准确度试验 |
Machine tools - Test conditions for wire electrical-discharge machines (wire EDM) - Terminology and testing of the accuracy |
| BS ISO 14139-2000 |
比重测定.利用设备测量明渠流量.复合测量设备 |
Hydrometric determinations - Flow measurements in open channels using structures - Compound gauging structures |
| BS ISO 14152-2002 |
中子辐射防护屏蔽.选择适用材料用的设计原则和考虑 |
Neutron radiation protection shielding - Design principles and considerations for the choice of appropriate materials |
| BS ISO 14154-2005 |
土质.一些选定的氯苯酚的测定.电子俘获检测的气相色谱法 |
|
| BS ISO 14156-2001 |
奶及奶制品.脂类和脂溶性化合物的萃取方法 |
Milk and milk products - Extraction methods for lipids and liposoluble compounds |
| BS ISO 14164-1999 |
稳定源排放.管道中气流容积流量比率测定.自动配置方法 |
Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method |
| BS ISO 14168-2003 |
硬金属除外的金属粉末.铜基渗透粉末的试验方法 |
Metallic powders, excluding hardmetals - Method for testing copper-base infiltrating powders |
| BS ISO 14180-1998 |
固体矿物燃料.煤层取样指南 |
Solid mineral fuels - Guidance on the sampling of coal seams |
| BS ISO 14224-1999 |
石油和天然气工业.设备可靠性和维护数据的收集和交换 |
Petroleum and natural gas industries - Collection and exchange of reliability and maintenance data for equipment |
| BS ISO 14237-2000 |
表面化学分析.次级离子质谱法.使用非均一掺杂材料的硅中硼原子的浓度测定 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials) |
| BS ISO 14242-1-2002 |
外科植入物.髋关节假肢的总磨损.磨损的负荷和位移参数.试验用试验机和相应环境条件 |
(Implants for surgery - Wear of total hip joint prostheses - Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test) |
| BS ISO 14242-2-2000 |
外科植入物.髋关节假肢的磨损.测量方法 |
(Implants for surgery - Wear of total hip joint prostheses - Methods of measurement) |
| BS ISO 14243-1-2002 |
外科植入物.膝关节假肢的总磨损.试验用有负荷控制和相应控制条件的磨损试验机的负荷和位移参数 |
(Implants for surgery - Wear of total knee joint prostheses - Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test) |
| BS ISO 14243-2-2000 |
外科植入物.膝关节假肢的磨损.测量方法 |
Implants for surgery - Wear of total knee joint prostheses - Methods of measurement |
| BS ISO 14258-1998 |
工业自动化系统.企业模式概念和规则 |
Industrial automation systems - Concepts and rules for enterprise models |
| BS ISO 14269-1-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.词汇 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Vocabulary |
| BS ISO 14269-2-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.加热、通风和空调试验方法和性能 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Heating, ventilating and air-conditioning test method and performance |
| BS ISO 14269-3-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.太阳能加热效果测定 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Determination of effect of solar heating |
| BS ISO 14269-4-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.空气过滤件试验方法 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Air filter element test method |
| BS ISO 14269-5-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.增压系统试验方法 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Pressurization system test method |
| BS ISO 14275-2002 |
航空航天.内设十字形条纹驱动器.试验方法 |
Aerospace - Drives, internal, offset cruciform, ribbed - Metric series |
| BS ISO 14276-2002 |
航空航天.内偏距十字交叉驱动器.米制系列 |
Aerospace - Drives, internal, offset cruciform - Metric series |
| BS ISO 14277-2002 |
航空航天.内偏置十字槽或无槽扳动的扳手.米制系列 |
Aerospace - Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14278-2002 |
航空航天.内偏置十字槽或无槽的量规.米制系列 |
Aerospace - Gauges, for internal offset cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14279-2002 |
航空航天.内十字槽扳手.米制系列 |
Aerospace - Drives, internal, cruciform - Metric series |
| BS ISO 14280-2002 |
航空航天.内十字槽或无槽扳动的扳手.米制系列 |
Aerospace - Drivers, ribbed, for internal cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14281-2002 |
航空航天.内十字槽或无槽的量规.米制系列 |
Aerospace - Gauges, for internal cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14300-2-2002 |
航空航天系列.程序管理.产品保证程序 |
Space systems - Programme management - Product assurance |
| BS ISO 14302-2003 |
航空航天系列.航天系统.电磁兼容性要求 |
(Aerospace series - Space systems - Electromagnetic compatibility requirements) |
| BS ISO 14303-2002 |
空间系统.控制客车对航天器的接口 |
Space systems - Launch-vehicle-to-spacecraft interfaces |
| BS ISO 1431-1-2004 |
硫化橡胶或热塑性橡胶.耐臭氧龟裂性.静态和动态应变试验 |
|
| BS ISO 1431-3-2000 |
橡胶,硫化橡胶或热塑橡胶.耐臭氧龟裂性.实验室测定臭氧浓度的基准和交替方法 |
Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
| BS ISO 14315-1998 |
工业金属丝网筛规范 |
Specification for industrial wire screens |
| BS ISO 1434-1996 |
包装的天然橡胶.包装层上胶量的测定 |
Natural rubber in bales - Amount of bale coating - Determination |
| BS ISO 14368-1-2001 |
无机和青玉表面玻璃.尺寸和公差 |
Mineral and sapphire watch-glasses - Dimensions and tolerances |
| BS ISO 14368-2-2003 |
无机和蓝宝石表面玻璃.用粘着剂或衬垫组装外壳 |
Mineral and sapphire watch-glasses - Assembly to the case by adhesive or using a gasket |
| BS ISO 14368-3-2003 |
无机和蓝宝石表玻璃.质量标准和试验方法 |
(Mineral and sapphire watch-glasses - Qualitative criteria and test methods) |
| BS ISO 14377-2002 |
罐装脱脂牛奶.锡含量测定.使用石墨炉原子吸收光谱测量方法 |
Canned evaporated milk - Determination of tin content - Method using graphite furnace atomic absorption spectrometry |
| BS ISO 14378-2000 |
奶和干奶粉.用高性能液相色谱法测定碘化物含量 |
Milk and dried milk - Determination of iodide content - Method using high performance liquid chromatography |
| BS ISO 14396-2002 |
往复式内燃机.测定内燃机功率的测定和试验方法.与ISO 8178协调的废弃排放试验 |
Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 |
| BS ISO 14397-1-2002 |
土方机械.装载机和挖掘机.验证计算倾卸载荷用的额定工作量的计算和试验方法 |
Earth-moving machinery - Loaders and backhoe loaders - Calculation of rated operating capacity and test method for verifying calculated tipping load |
| BS ISO 14397-2-2002 |
土方机械.装载机和挖掘机.计算最大提升高度的爆发力和提升能力的试验方法 |
Earth-moving machinery - Loaders and backhoe loaders - Test method for measuring breakout forces and lift capacity to maximum lift height |
| BS ISO 14401-2-2004 |
土方机械.观察的视野及后视镜视野.性能标准 |
|
| BS ISO 14401-2-2004 |
土方机械.观察的视野及后视镜视野.性能标准 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com