标准号 |
中文名称 |
英文名称 |
| BS EN 60068-2-58-1999 |
环境试验.试验方法.试验Td.软钎焊性、喷涂金属耐融化性和表面装配设备(SMD)耐焊接热的试验方法 |
Environmental testing - Test methods - Test Td - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| BS EN 60068-2-58-2004 |
环境试验.试验方法.试验Td.表面安装设备用可焊性、耐金属溶融和耐焊接热的试验方法 |
|
| BS EN 60068-2-59-1991 |
环境试验.第2部分:试验.试验Fe和导则.第59部分:振动(正弦拍频法) |
Environmental testing - Test methods - Test Fe and guidance - Vibration (sine-beat method) |
| BS EN 60068-2-6-1996 |
基本环境试验规程.第2部分:试验.第6节:试验Fc:振动(正弦波) |
Environmental testing - Test methods - Test Fc - Vibration (sinusoidal) |
| BS EN 60068-2-60-1996 |
环境试验.第2部分:试验.第60节:试验Ke:流动混合气体的腐蚀试验 |
Environmental testing - Test methods - Test Ke - Flowing mixed gas corrosion test |
| BS EN 60068-2-61-1994 |
环境试验.第2部分:试验.第61节:试验2/ABDM.气候顺序 |
Environmental testing - Test methods - Test Z/ABDM - Climatic sequence |
| BS EN 60068-2-64-1995 |
环境试验.第2部分第64节:试验方法.试验Fh:振动、宽带随机抽样(数字控制) |
Environmental testing - Test methods - Test Fh - Vibration, broad-band random (digital control) and guidance |
| BS EN 60068-2-65-1995 |
环境试验.第2部分:试验方法.第65节:试验Fg:振动、声响感应 |
(Environmental testing - Test methods - Test Fg - Vibration, acoustically induced) |
| BS EN 60068-2-66-1995 |
环境试验.第2部分:试验方法.试验Cx稳态湿热(非饱合加压水蒸气) |
(Environmental testing - Test methods - Test Cx - Damp heat, steady state (unsaturated pressurized vapour)) |
| BS EN 60068-2-67-1996 |
环境试验规程.试验方法.CY试验.件初始条件下的湿热试验,冲击试验,加速试验 |
(Environmental testing - Test methods - Test Cy - Damp heat, steady state, accelerated test primarily intended for components) |
| BS EN 60068-2-68-1996 |
环境试验.第2部分:试验方法.试验L:尘和砂 |
(Environmental testing - Test methods - Test L. Dust and sand) |
| BS EN 60068-2-69-1996 |
环境试验规程.第2部分:试验.第69节:试验Te:润湿平衡法对表面镶嵌技术用电子件的软钎焊试验 |
(Environmental testing - Test methods - Tests - Test Te - Solderability testing of electronic components for surface mount technology by the wetting balance method) |
| BS EN 60068-2-7-1993 |
环境试验.试验方法.试验Ga和导则.稳态加速度 |
(Environmental testing - Test methods - Test Ga and guidance - Acceleration, steady state) |
| BS EN 60068-2-70-1996 |
环境试验.试验方法.试验Xb:手和手指磨擦引起的字母及标记的磨蚀 |
(Environmental testing - Test methods - Test Xb - Abrasion of markings and letterings caused by rubbing of fingers and hands) |
| BS EN 60068-2-74-2000 |
环境试验.试验方法.试验Xc:流体污染试验 |
(Environmental testing - Test methods - Test Xc: Fluid contamination) |
| BS EN 60068-2-75-1997 |
环境试验.试验方法.试验Eh.捶击试验 |
(Environmental testing - Test methods - Test Eh - Hammer tests) |
| BS EN 60068-2-77-1999 |
环境试验.试验方法.整体强度和冲击 |
(Environmental testing - Test methods - Body strength and impact shock) |
| BS EN 60068-2-78-2002 |
环境试验.试验方法.试验室:湿热、稳定状态 |
(Environmental testing - Test methods - Test Cab - Damp heat, steady state) |
| BS EN 60068-2-81-2003 |
环境试验.试验方法.试验Ei.冲击.冲击响应频谱合成 |
(Environmental testing - Test methods - Test Ei - Shock - Shock response spectrum synthesis) |
| BS EN 60068-2-9-2000 |
环境试验.试验方法.试验.太阳辐射试验指南 |
(Environmental testing - Test methods - Tests - Guidance for solar radiation testing) |
| BS EN 60068-3-1-1999 |
环境试验.指南.低温和干热试验 |
(Environmental testing - Guidance - Cold and dry heat tests) |
| BS EN 60068-3-2-1999 |
环境试验.指南.组合温度/低气压试验 |
(Environmental testing - Guidance - Combined temperature/low air pressure tests) |
| BS EN 60068-3-3-1991 |
环境试验.指南.环境试验.其它.第3节:设备的抗震试验方法指南 |
(Environmental testing - Guidance - Environmental testing - Miscellaneous - Guide to seismic test methods for equipment) |
| BS EN 60068-3-4-2002 |
环境试验.指南.湿热试验 |
(Environmental testing - Guidance - Damp heat tests) |
| BS EN 60068-3-5-2002 |
环境试验.指南.温度室性能的确定 |
(Environmental testing - Guidance - Confirmation of the performance of temperature chambers) |
| BS EN 60068-3-6-2002 |
环境试验.指南.温度/潮湿室性能的确定 |
(Environmental testing - Guidance - Confirmation of the performance of temperature/humidity chambers) |
| BS EN 60068-3-7-2002 |
环境试验.指南.试验A和B(加载)用温度室内的测量 |
(Environmental testing - Guidance - Measurements in temperature chambers for tests A and B (with load)) |
| BS EN 60068-3-8-2004 |
环境检验.导则.振动试验的选择 |
|
| BS EN 60068-3-8-2004 |
环境试验.配套文件和指南.在振动试验中选择 |
|
| BS EN 60068-4-1996 |
环境试验.规范编制者用材料.试验总结 |
(Environmental testing - Information for specification writers - Test summaries) |
| BS EN 60068-5-2-2000 |
环境试验.试验方法起草指南.术语和定义 |
(Environmental testing - Guide to drafting of test methods - Terms and definitions) |
| BS EN 60071-1-1996 |
绝缘配合.第1部分:术语、定义、原理和规则 |
(Insulation co-ordination - Definitions, principles and rules) |
| BS EN 60071-2-1997 |
绝缘配合.应用指南 |
(Insulation co-ordination - Application guide) |
| BS EN 60073-2002 |
人机接口、标记和识别用基本和安全原理.显示设备和调节器的编码原理 |
(Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators) |
| BS EN 60076-1-1997 |
电力变压器.第1部分:通则 |
(Power transformers - General) |
| BS EN 60076-10-2001 |
电力变压器.声音水平的测定 |
(Power transformers - Determination of sound levels) |
| BS EN 60076-2-1997 |
电力变压器.升温 |
(Power transformers - Temperature rise) |
| BS EN 60076-3-2001 |
电力变压器.绝缘水平和介质性能试验以及空气中的外部间隙 |
(Power transformers - Insulation levels, dielectric tests and external clearances in air) |
| BS EN 60076-4-2002 |
电力变压器.电光脉冲和开关脉冲测试指南.电力变压器和电抗器 |
(Power transformers - Guide to the lightning impulse and switching impulse testing - Power transformers and reactors) |
| BS EN 60076-5-2001 |
电力变压器.耐短路性 |
(Power transformers - Ability to withstand short circuit) |
| BS EN 60077-1-2003 |
铁路设施.机车车辆用电气设备.一般服务条件和一般规则 |
(Railway applications - Electric equipment for rolling stock - General service conditions and general rules) |
| BS EN 60077-2-2003 |
铁路设施.机车车辆用电气设备.一般规则 |
(Railway applications - Electric equipment for rolling stock - Electrotechnical components - General rules) |
| BS EN 60077-3-2003 |
铁路设施.机车车辆用电气设备.直流断路器规则 |
(Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for d.c. circuit-breakers) |
| BS EN 60077-4-2003 |
铁路设施.机车车辆用电气设备.电工件.交流断路器规则 |
(Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for AC circuit-breakers) |
| BS EN 60077-5-2003 |
铁路设施.铁路机车用电气设备.电工组件.高压熔断器用规则 |
(Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for HV fuses) |
| BS EN 60079-0-2004 |
爆炸性气体环境用电气设备.一般要求 |
|
| BS EN 60079-1-2004 |
爆炸性气体环境用电气设备.防火封装d型 |
|
| BS EN 60079-10-2003 |
爆炸性气体气压用电气设备.危险场所的分类 |
(Electrical apparatus for explosive gas atmospheres - Classification of hazardous areas) |
| BS EN 60079-14-2003 |
爆炸性气体环境用电气设备.危险场所(矿井除外)中的电气装置 |
(Electrical apparatus for explosive gas atmospheres - Electrical installations in hazardous areas (other than mines)) |
| BS EN 60079-15-2003 |
爆炸性气体环境用电气设备.防护型“n“ |
(Electrical apparatus for explosive gas atmospheres - Type of protection “n“) |
| BS EN 60079-17-2003 |
爆炸性气体气压用电气设备.危险场所(矿井除外)电气设备的检验和维护 |
(Electrical apparatus for explosive gas atmospheres - Inspection and maintenance of electrical installations in hazardous areas (other than mines)) |
| BS EN 60079-18-2004 |
爆炸性气体环境用电气设备.封装保护m型电气设备类的建造、试验和标记 |
|
| BS EN 60079-2-2004 |
爆炸性气体环境用电气设备.压力封装型p |
|
| BS EN 60079-25-2004 |
爆炸性气体环境用电气设备.本安型系统 |
|
| BS EN 60079-7-2003 |
爆炸性气体环境用电气设备.增安型“e“ |
(Electrical apparatus for explosive gas atmospheres - Increased safety “e“) |
| BS EN 60081-1998 |
双帽荧光灯.性能规范 |
(Double-capped fluorescent lamps - Performance specifications) |
| BS EN 60085-2004 |
电气绝缘.耐热性分类 |
|
| BS EN 60086-1-2001 |
原电池.概述 |
(Primary batteries - General) |
| BS EN 60086-2-2001 |
原电池组.物理和电气规范 |
(Primary batteries - Physical and electrical specifications) |
| BS EN 60086-3-1996 |
原电池.第3部分:手表用电池 |
(Primary batteries - Watch batteries) |
| BS EN 60086-4-2000 |
原电池.锂电池的安全标准. |
(Primary batteries - Safety standard for lithium batteries) |
| BS EN 60086-5-2001 |
原电池.含水电解质的电池的安全 |
(Primary batteries - Safety of batteries with aqueous electrolyte) |
| BS EN 60086-5-2005 |
原电池.含水电解质电池安全 |
|
| BS EN 60092-507-2000 |
船用电气设备.游艇 |
(Electrical installations in ships - Pleasure craft) |
| BS EN 60094-1-1994 |
磁带录音和放音系统.第1部分:一般条件和要求规范 |
(Magnetic tape sound recording and reproducing systems - Specification for general conditions and requirements) |
| BS EN 60094-2-1996 |
校准磁带 |
(Magnetic tape sound recording and reproducing systems - Calibration tapes) |
| BS EN 60094-3-1990 |
磁带录音和放音系统.磁带录音和放音设备特性的测量方法 |
(Magnetic tape sound recording and reproducing systems - Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape) |
| BS EN 60094-4-1987 |
磁带录音和放音系统.第4部分:磁带的机械特性 |
(Magnetic tape sound recording and reproducing systems - Mechanical magnetic tape properties) |
| BS EN 60094-5-1989 |
磁带录音和还音系统.磁带的特性规范 |
(Magnetic tape sound recording and reproducing systems - Specification for electrical magnetic tape properties) |
| BS EN 60094-7-1994 |
磁带录音和放音系统.商用和家用盒式录音磁带 |
(Magnetic tape sound recording and reproducing systems - Specification for cassettes for commercial tape records and domestic use) |
| BS EN 60095-2-1993 |
铅酸启动蓄电池组.第2部分:蓄电池尺寸和端子尺寸及标志 |
(Lead-acid starter batteries - Dimensions of batteries and dimensions and marking of terminals) |
| BS EN 60095-4-1993 |
铅酸启动蓄电池组.第4部分:重型商用车辆用蓄电池组的尺寸 |
(Lead-acid starter batteries - Dimensions of batteries for heavy commercial vehicles) |
| BS EN 60097-1993 |
印制电路的网格系统规范 |
(Specification for grid systems for printed circuits) |
| BS EN 60099-1-1994 |
过电压限制器.交流系统过电压限制器的非线性电阻器类型 |
(Surge arresters - Non-linear resistor type gapped surge arrestors for a.c. systems) |
| BS EN 60099-4-1993 |
电涌放电器.第4部分:交流系统用无气隙金属氧化物电涌放电器 |
(Surge arresters - Metal-oxide surge arresters without gaps for a.c. systems) |
| BS EN 60099-4-2004 |
避雷器.第4部分:交流电系统用无间隙金属氧化物避雷器 |
|
| BS EN 60099-5-1997 |
过电压限制器.选择和应用的推荐方法 |
(Surge arresters - Selection and application recommendations) |
| BS EN 601-1995 |
铝和铝合金.铸件.与食品接触用铸件的化学组成 |
(Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with food) |
| BS EN 601-2004 |
铝和铝合金.铸件.与食品接触用铸件的化学成分 |
|
| BS EN 601-2004 |
铝和铝合金.铸件.与食品接触用铸件的化学成分 |
|
| BS EN 60107-1-1997 |
电视广播传输接收机的测量方法.第1部分:一般原理.显示器上无线电和视频频率的测量 |
(Methods of measurement on receivers for television broadcast transmission - General considerations - Measurements on displays at radio and video frequencies) |
| BS EN 60107-2-1997 |
电视广播传输接收机的测量方法.第2部分:声频通道.单音通道用一般方法 |
(Methods of measurement on receivers for television broadcast transmission - Audio channels - General methods and methods for monophonic channels) |
| BS EN 60107-5-1999 |
电视广播传输接收机的测量方法.用NICAM两频道数字声音系统的多频道声音电视接收器的电气测量 |
(Methods of measurement on receivers for television broadcast transmission - Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system) |
| BS EN 60107-7-1997 |
电视广播传输接收机的测量方法.HDTV显示器 |
(Methods of measurement on receivers for television broadcast transmission - HDTV displays) |
| BS EN 60107-8-1997 |
电视广播传输接收机的测量方法.第8部分:D2-MAC信息包设备上的测量 |
(Methods of measurement on receivers for television broadcast transmission - Measurements on D2-MAC/packet equipment) |
| BS EN 60110-1-1998 |
感应加热安装的电力电容器.概述 |
(Power capacitors for induction heating installations - General) |
| BS EN 60112-2003 |
固体绝缘材料的比较起痕指数和耐泄痕指数的测定方法 |
(Method for the determination of the proof and the comparative tracking indices of solid insulating materials) |
| BS EN 60115-1-2002 |
电子设备用固定电阻器.总规范 |
(Fixed resistors for use in electronic equipment - Generic specification) |
| BS EN 60115-9-1-2004 |
电子设备用固定电阻器.空白详细规范.带可单独测量电阻器的表面安装固定电阻网络.评定水平EZ |
|
| BS EN 60115-9-1-2004 |
电子设备用固定电阻器.空白详细规范.带可单独测量电阻器的固定表面安装电阻网络.评定等级EZ |
|
| BS EN 60115-9-2004 |
电子设备用固定电阻器.分规范.带可单独测量电阻器的表面安装固定电阻网络 |
|
| BS EN 60118-0-1984 |
助听器.电声特性测量方法 |
(Hearing aids - Methods for measurement of electroacoustical characteristics) |
| BS EN 60118-1-1995 |
助听器.提供有感应线圈的助听器 |
(Hearing aids - Hearing aids with induction pick-up coil input) |
| BS EN 60118-12-1997 |
助听器.第12部分:电子连接器系统的尺寸 |
(Hearing aids - Dimensions of electrical connector systems) |
| BS EN 60118-13-1998 |
助听器.电磁兼容性(EMC).产品标准 |
(Hearing aids - Electromagnetic compatibility (EMC) - Product standard) |
| BS EN 60118-14-1998 |
助听器.数字接口装置规范 |
(Hearing aids - Specification of a digital interface device) |
| BS EN 60118-2-1996 |
助听器.第2部分:带自动增益控制电路助听器电声特性的测量方法 |
(Hearing aids - Methods for measurement of electroacoustical characteristics of hearing aids with automatic gain control circuits) |
| BS EN 60118-4-1998 |
助听器.助听用音频感应环路的磁场强度 |
(Hearing aids - Magnetic field strength in audio-frequency induction loops for hearing aid purposes) |
| BS EN 60118-6-1999 |
助听器.助听器用电气输入电路的特性 |
(Hearing aids - Characteristics of electrical input circuits for hearing aids) |
| BS EN 60118-7-1985 |
助听器.交货质量检验用助听器的性能测量方法 |
(Hearing aids - Methods for measurement of the performance characteristics of hearing aids for quality inspection on delivery) |
| BS EN 60122-1-2003 |
经过质量评定的石英晶体件.总规范 |
(Quartz crystal units of assessed quality - Generic specification) |
| BS EN 60122-3-2002 |
质量评定过的石英晶体件.标准外形和引线连接 |
(Quartz crystal units of assessed quality - Standard outlines and lead connections) |
| BS EN 60127-1-1991 |
小型熔断器.第1部分:小型熔断器定义和小型熔断片的一般要求 |
(Miniature fuses - Definitions for miniature fuses and general requirements for miniature fuse-links) |
| BS EN 60127-10-2002 |
小型熔断器.小型熔断器的用户指南 |
(Miniature fuses - User guide for miniature fuses) |
| BS EN 60127-2-2003 |
微型熔断器.管式熔断体 |
(Miniature fuses - Cartridge fuse-links) |
| BS EN 60127-3-1996 |
微型熔断器.超微型熔断体 |
(Miniature fuses - Specification for sub-miniature fuse-links) |
| BS EN 60127-4-1998 |
小型熔断器.普通模数熔断链(UMF) |
(Miniature fuses - Universal modular fuse-links (UMF)) |
| BS EN 60127-5-1991 |
小型熔断器.小型熔丝链质量评定指南 |
(Miniature fuses - Guide for the quality assessment of miniature fuse-links) |
| BS EN 60127-6-1994 |
小型熔断器.小型管状熔断片用熔断器支持件 |
(Miniature fuses - Fuse-holders for miniature cartridge fuse-links) |
| BS EN 60130-17-1999 |
频率低于3MHz的连接器.使用可充电电池的允许多向连接的互连装置的详细规范 |
(Connectors for frequencies below 3 MHz - Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries) |
| BS EN 60130-9-2001 |
3MHz以下频率的连接器.无线电和相关声音设备的环形连接器 |
(Connectors for frequencies below 3 MHz - Circular connectors for radio and associated sound equipment) |
| BS EN 60133-2001 |
由磁性氧化物和相关部件制造的芯尺寸 |
(Dimensions of pot-cores made of magnetic oxides and associated parts) |
| BS EN 60137-2003 |
交流电压1000V以上绝缘套管 |
(Insulated bushings for alternating voltages above 1000 V) |
| BS EN 60139-2001 |
阴极射线管的外形图的准备及其部件、连接和量规 |
(Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges) |
| BS EN 60143-1-1993 |
电力系统用串联电容器.第1部分:概述.工作性能.检验和测量.安全要求.建造规范 |
(Series capacitors for power systems - General - Performance, testing and rating - Safety requirements - Guide for installation) |
| BS EN 60143-1-2005 |
电力系统用串联电容器.总则 |
|
| BS EN 60143-2-1995 |
电力系统用串联电容器.串联电容器组用保护装置. |
(Series capacitors for power systems - Protective equipment for series capacitor banks) |
| BS EN 60143-3-1998 |
电力系统用串联电容器.内部熔断器 |
(Series capacitors for power systems - Internal fuses) |
| BS EN 60146-2-2000 |
半导体变流器.一般要求和线路换向变流器.包括直流变换器的自换向变流器 |
(Semiconductor convertors - General requirements and line commutated convertors - Self-commutated semiconductor converters including direct d.c. converters) |
| BS EN 60154-1-1996 |
波导法兰.一般要求 |
(Flanges for waveguides - General requirements) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com