标准号 |
中文名称 |
英文名称 |
BS EN 12976-2-2001 |
太阳能热系统和件.工厂制造系统.试验方法 |
(Thermal solar systems and components - Factory made systems - Test methods) |
BS EN 12978-2003 |
工业、商业和车库用门.电动门的安全装置.要求和试验方法 |
(Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods) |
BS EN 12979-2002 |
自动液化石油气设备.安装要求 |
(Automotive LPG systems - Installation requirements) |
BS EN 1298-1996 |
移动式工作吊盘.制定结构说明和使用说明的规范 |
(Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual) |
BS EN 12980-2000 |
与食品接触的材料和物品.给养和工业用非金属物品.抗冲击性测定的试验方法 |
(Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance) |
BS EN 12982-2000 |
工业阀门.对焊尾阀一端到另一端和中心到端面的尺寸 |
(Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves) |
BS EN 12983-1-2000 |
烹饪用具.炉、炉架上使用的家用烹饪用具.一般要求 |
(Cookware - Domestic cookware for use on top of a stove, cooker or hob - General requirements) |
BS EN 1299-1997 |
机械振动和冲击.机械的振动隔离.振动源隔离的使用信息 |
(Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation) |
BS EN 12999-2003 |
起重机.装载起重机 |
(Cranes - Loader cranes) |
BS EN 1300-2004 |
安全储存设备.防范非正常打开的高度安全锁的分类 |
|
BS EN 13002-2-1999 |
碳纤维长丝纱.试验方法和通用规范 |
(Carbon fibre yarns - Test methods and general specifications) |
BS EN 13003-1-1999 |
帕蜡-芳族聚酰胺纤维长丝纱.名称与符号 |
(Para-aramid fibre filament yarns - Designation) |
BS EN 13003-2-1999 |
帕蜡-芳族聚酰胺纤维长丝纱.试验方法和通用规范 |
(Para-aramid fibre filament yarns - Methods of test and general specifications) |
BS EN 13003-3-1999 |
帕蜡-芳族聚酰胺纤维长丝纱.技术规范 |
(Para-aramid fibre filament yarns - Technical specifications) |
BS EN 13007-2000 |
钢桶.额定容量20l到60l带固定盖的桶 |
(Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l) |
BS EN 13008-2000 |
钢桶.额定容量15l到62l带可挪开盖的桶 |
(Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l) |
BS EN 13009-2000 |
建筑材料和产品的水热性能.吸水膨胀系数的测定 |
(Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient) |
BS EN 1301-1-1997 |
铝和铝合金.拉制线.检查和传递的技术条件 |
(Aluminium and aluminium alloys - Drawn wire - Technical conditions for inspection and delivery) |
BS EN 1301-2-1997 |
铝和铝合金.冷拔丝.机械性能 |
(Aluminium and aluminium alloys - Drawn wire - Mechanical properties) |
BS EN 1301-3-1997 |
铝和铝合金.拉制线.规格耐力 |
(Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions) |
BS EN 13010-2003 |
包装.单件包装.显示板的尺寸和要求 |
(Packaging - Unit packaging - Dimensions and requirements for pegboard display) |
BS EN 130100-1998 |
电子器件质量评定协调体系.分规范:直流电流用固定聚对二甲酸乙酯膜介电金属箔电容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current) |
BS EN 130101-1998 |
电子器件质量评定协调体系.空白详细规范:直流电流用固定聚对二甲酸乙酯膜介电金属箔电容器.评估级E |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current - Assessment l) |
BS EN 130102-1998 |
电子器件质量评定协调体系.空白详细规范:直流电流用固定聚对二甲酸乙酯膜介电金属箔电容器.评估EZ级 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current - Assessment l) |
BS EN 13011-2001 |
运输服务.货物运输链.性能条件的申明系统 |
(Transport services - Goods transport chains - System for declaration of performance conditions) |
BS EN 13012-2002 |
加油站.用于燃料自动售货机上的自动注口的结构和性能 |
(Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers) |
BS EN 13014-2000 |
麻醉和呼吸设备用气体取样管的连接 |
(Connections for gas sampling tubes to anaesthetic and respiratory equipment) |
BS EN 13015-2001 |
电梯和升降机维护.维护说明规则 |
(Maintenance for lifts and escalators - Rules for maintenance instructions) |
BS EN 13016-1-2000 |
液态石油产品.蒸气压力.气体饱和蒸气压力(ASVP)的测定 |
(Liquid petroleum products - Vapour pressure - Determination of air saturated vapour pressure (ASVP)) |
BS EN 13016-2-2000 |
液态石油产品.蒸气压力.40℃和100℃之间绝对蒸气压力(ASVP)的测定 |
(Liquid petroleum products - Vapour pressure - Determination of absolute vapour pressure (AVP) between 40 鳦 and 100 鳦) |
BS EN 13017-1-2001 |
实心木板.根据表面性质分类.软木 |
(Solid wood panels - Classification by surface appearance - Solid wood panels - Classification by surface appearance - Softwood) |
BS EN 13017-2-2001 |
实心木板.根据表面性质分类.硬木 |
(Solid wood panels - Classification by surface appearance - Hardwood) |
BS EN 13018-2001 |
无损试验.视觉试验.一般原理 |
(Non-destructive testing - Visual testing - General principles) |
BS EN 13019-2001 |
道路表面清洁机.安全要求 |
(Machines for road surface cleaning - Safety requirements) |
BS EN 1302-1999 |
人类消耗用水处理用药液.铝基絮凝剂.分析方法 |
(Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods) |
BS EN 130200-1993 |
电子器件质量评定体系.带固体式或非固体式液体电解质的钽固定电容器的分规范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte) |
BS EN 130201-1995 |
电子器件质量评定协调体系规范.空白详细规范.带固体电解质和多孔阳极的钽固定电容器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)) |
BS EN 130202-1998 |
电子器件质量评定协调体系.空白详细规范.带有非固体电解质多孔电极(亚系2)的固定钽电容器 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)) |
BS EN 13021-2003 |
冬季使用机械的安全要求 |
(Winter service machines - Safety requirements) |
BS EN 13023-2003 |
打英纸张加工、造纸机械和辅助设备的噪声测量.准确度等级为2和3 |
(Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3) |
BS EN 13024-1-2002 |
建筑用玻璃.热钢化硼硅酸盐安全玻璃.定义和描述 |
(Glass in building - Thermally toughened borosilicate safety glass - Definition and description) |
BS EN 13024-2-2004 |
建筑用玻璃.热钢化硼硅酸盐安全玻璃.合格评价/产品标准 |
|
BS EN 13024-2-2004 |
建筑用玻璃.热钢化硼硅酸盐安全玻璃.合格评价/产品标准 |
|
BS EN 13025-2000 |
包装.轻型金属包装.最大不超过40000ml容积的圆形、柱形和锥形通用金属容器的标称体积 |
(Packaging - Light gauge metal packaging - Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40000 ml) |
BS EN 13026-2001 |
包装.轻型金属包装.一般用途的非园形,圆柱形,锥形容积达30000ml的金属容器的标称填充容积 |
(Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml) |
BS EN 13027-2001 |
包装.轻型金属包装.由标称容量限定的敞口的园形容器 |
(Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity) |
BS EN 13028-2001 |
包装.轻型金属包装.由标称容量限定的有或无填充气体的园形敞口容器 |
(Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes) |
BS EN 13029-2001 |
包装.轻型金属包装.塞塑料封闭物的缝隙 |
(Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures) |
BS EN 1303-1998 |
建筑五金.锁用柱体.要求和试验方法 |
(Building hardware - Cylinders for locks - Requirements and test methods) |
BS EN 1303-2005 |
建筑五金.锁芯.要求和试验方法 |
|
BS EN 13030-2001 |
建筑物的通风.终端.固定百叶窗经受模拟雨的性能试验 |
(Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain) |
BS EN 130300-1998 |
电子器件质量评定协调体系.空白详细规范.带有非固体电解质的铝电解质电容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte) |
BS EN 130301-2002 |
电子器件质量评定的协调系统.空白详细规范.带非固体电解质的铝电解质电容器 |
(Harmonized system of quality assessment for electronic components - Blank Detail Specification - Aluminium electrolytic capacitors with non-solid electrolyte) |
BS EN 13031-1-2002 |
暖房.设计和建造.商品性生产用暖房 |
(Greenhouses - Design and construction - Commercial production greenhouses) |
BS EN 13034-2005 |
液态化学物质防护服装.提供有限的液态化学物质防护性能的化学防护服装的性能要求(6型和PB[6]型设备) |
|
BS EN 13035-3-2003 |
平板玻璃的制造、处理和加工用机械和设备.安全要求.切割机 |
(Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Cutting machines) |
BS EN 13035-4-2003 |
平板玻璃的制造、处理和加工用机械和设备.安全要求.倾斜台 |
(Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Tilting tables) |
BS EN 13036-1-2002 |
道路和飞机场表面特征.试验方法.使用体积修补技术测量道路表面大的结构深度 |
(Road and airfield surface characteristics - Test methods - Measurement of pavement surface macrotexture depth using a volumetric patch technique) |
BS EN 13036-3-2003 |
道路和飞机场表面特征.试验方法.路面水平排水性能的测量 |
(Road and airfield surface characteristics - Test methods - Measurement of pavement surface horizontal drainability) |
BS EN 13036-4-2003 |
道路和机场表面特征.试验方法.表面耐滑性的测量方法.摆动法 |
(Road and airfield surface characteristics - Test methods - Method for measurement of slip/skid resistance of a surface - The pendulum test) |
BS EN 13036-7-2003 |
道路和机场表面特征.试验方法.路面层不平整性测量.直尺检验 |
(Road and airfield surface characteristics - Test methods - Irregularity measurement of pavement courses - The straightedge test) |
BS EN 13037-2000 |
土壤改良剂和培养基.PH值的测定 |
(Soil improvers and growing media - Determination of pH) |
BS EN 13038-2000 |
土壤改良剂和培养基.电导性测定 |
(Soil improvers and growing media - Determination of electrical conductivity) |
BS EN 13039-2000 |
土壤改良剂和培养基.有机物质含量和灰分测定 |
(Soil improvers and growing media - Determination of organic matter content and ash) |
BS EN 1304-1998 |
非连续铺设的粘土屋面瓦.产品定义和规范 |
(Clay roofing tiles for discontinuous laying - Products definitions and specifications) |
BS EN 1304-2005 |
粘土屋面瓦和配件.产品定义和规范 |
|
BS EN 13040-2000 |
土壤改良剂和培养基.物理和化学试验、干物质含量和潮气含量及实验室压实松散材料密度的测定用样品制备 |
(Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density) |
BS EN 13041-2000 |
土壤改良剂和培养基.物理性能测定.毛体积干密度、空气量、水量、收缩值和总空隙容积 |
(Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space) |
BS EN 13042-2-2004 |
空心玻璃生产、处理和加工用机械和设备.安全要求.给料用搬运机械 |
|
BS EN 13042-2-2004 |
空心玻璃生产、处理和加工用机械和设备.安全要求.给料用搬运机械 |
|
BS EN 13042-5-2003 |
空心玻璃生产、处理和加工用机械和设备.安全要求.压力机 |
(Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Presses) |
BS EN 13043-2002 |
机场道路和其他行车区域沥青混合物和表面处理用集料 |
(Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas) |
BS EN 13044-2001 |
交换部件.编码.识别和标记 |
(Swap bodies - Coding, identification and marking) |
BS EN 13045-2000 |
包装.圆柱形塑料软管.尺寸和公差 |
(Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances) |
BS EN 13046-2000 |
包装.圆柱形金属软管.尺寸和公差 |
(Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances) |
BS EN 13047-2000 |
包装.锥形金属软管.尺寸和公差 |
(Packaging - Flexible conical metallic tubes - Dimensions and tolerances) |
BS EN 13048-2000 |
包装.铝软管.内部清漆薄膜厚度测量方法 |
(Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method) |
BS EN 13049-2003 |
窗.软质和笨重物体冲击.试验方法、安全要求和分类 |
(Windows - Soft and heavy body impact - Test method, safety requirements and classification) |
BS EN 1305-1996 |
内河航运船只.油残渣排放用连接件 |
(Inland navigation vessels - Connections for the discharge of oily mixture) |
BS EN 130500-1998 |
电子器件质量评定协调体系.空白详细规范.直流电用固定金属多碳膜介质电容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current) |
BS EN 130501-1998 |
电子器件质量评定协调体系.空白详细规范.直流电用固定金属多碳膜介质电容器.评估等级E |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level E) |
BS EN 130502-1998 |
电气件质量评估的协同系统.空白详细规范.直流电用固定金属多碳膜介质电容器.评估等级EZ |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level EZ) |
BS EN 13051-2001 |
幕墙.不透水性.位点试验 |
(Curtain walling - Watertightness - Site test) |
BS EN 13052-1-2001 |
有机物质对人类生活用水的影响.有机物质.管道系统中水的颜色和浊度的测定.试验方法 |
(Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Test method) |
BS EN 13053-2002 |
建筑物通风设备.空气处理设备.设备、组件和零件的额定值和性能 |
(Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections) |
BS EN 13054-2001 |
包装.完全填充运输包装.测定包裹重量中心的试验方法 |
(Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package) |
BS EN 13055-1-2002 |
轻集料.混凝土、泥浆和渣滓用轻集料 |
(Lightweight aggregates - Lightweight aggregates for concrete, mortar and grout) |
BS EN 13055-2-2004 |
轻集料.沥青混合料和表面处理及非粘结和粘结用轻集料 |
|
BS EN 13056-2000 |
内河运输船.30度到小于45度倾斜角楼梯.要求和类型 |
(Inland navigation vessels - Stairs with inclination angles of 30 degrees to) |
BS EN 13057-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.抗毛细管吸收性的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption) |
BS EN 13059-2002 |
工业用车的安全.振动测量的试验方法 |
(Safety of industrial trucks - Test methods for measuring vibration) |
BS EN 1306-1996 |
内河航运船只.污水排放用连接件 |
(Inland navigation vessels - Connections for the discharge of waste water) |
BS EN 13060-2005 |
小型蒸汽灭菌器 |
|
BS EN 13061-2002 |
防护服装.相关足球运动员用护胫.要求与试验方法 |
(Protective clothing - Shin guards for association football players - Requirements and test methods) |
BS EN 13062-2003 |
混凝土结构的保护和检修用产品和系统.试验方法.增强保护用产品的触变性测定 |
(Products and systems for the protection and repair of concrete structures - Test method - Determination of thixotropy of products for protection of reinforcement) |
BS EN 13067-2003 |
塑料焊接人员.焊工的资格检验.热塑焊接组件 |
(Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies) |
BS EN 13068-1-2000 |
无损检验.射线检验法.成像性能的定量测量 |
(Non-destructive testing - Radioscopic testing - Quantitative measurement of imaging properties) |
BS EN 13068-2-2000 |
无损检验.射线检验法.成像设备长期稳定性的检查 |
(Non-destructive testing - Radioscopic testing - Check of long term stability of imaging devices) |
BS EN 13068-3-2001 |
无损检验.射线检验.χ和γ射线对金属材料进行射线检验的一般原理 |
(Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays) |
BS EN 1307-1997 |
铺地织物.毛地毯的分级 |
(Textile floor coverings - Classification of pile carpets) |
BS EN 1307-2005 |
铺地织物.绒头地毯的分级 |
|
BS EN 13071-2002 |
废弃物分类收集容器.废物分类收集用容积为80l-5000l的地面机械提升容器 |
(Selective waste collection containers - Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste) |
BS EN 13073-2001 |
鞋靴.整个鞋的试验方法.耐水性 |
(Footwear - Test methods for whole shoe - Water resistance) |
BS EN 13074-2002 |
石油及其产品的试验方法.石油产品.沥青和沥青粘合剂.蒸发沥青乳液测定粘合剂的复原性 |
(Methods of test for petroleum and its products - Petroleum products - Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation) |
BS EN 13075-1-2002 |
石油及其产品的试验方法.用矿物过滤法测定沥阳离子青乳胶剂断裂值 |
(Methods of test for petroleum and its products - Determination of breaking value of cationic bitumen emulsions, mineral filler method) |
BS EN 13075-2-2002 |
石油及其产品的试验方法.测定沥阳离子青乳胶剂的精华含混时间 |
(Methods of test for petroleum and its products - Determination of fines mixing time of cationic bitumen emulsions) |
BS EN 13076-2003 |
防饮用水回流污染装置.无限制的气隙.A类、A型 |
(Devices to prevent pollution by backflow of potable water - Unrestricted air gap - Family A, type A) |
BS EN 13077-2003 |
防饮用水回流污染装置.带不循环溢流口的(无限制)气隙.A类B型 |
(Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A, type B) |
BS EN 13078-2003 |
防饮用水回流污染装置.带浸没式给水并装有空气进口和溢流口的气隙.A类C型 |
(Devices to prevent pollution by backflow of potable water - Air gap with submerged feed incorporating air inlet plus overflow - Family A, type C) |
BS EN 13079-2003 |
防饮用水回流造成污染的设备.有喷嘴的气隙.A类.D型 |
(Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A. Type D) |
BS EN 1308-1999 |
磁砖胶粘剂.滑动性的测定 |
(Adhesives for tiles - Determination of slip) |
BS EN 13080-2002 |
农用机械.粪肥撒布机.环保.要求和试验方法 |
(Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods) |
BS EN 130800-2001 |
电子器件质量评定协调系统.分规范.钽表面安装电容器 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Tantalum surface mounting capacitors) |
BS EN 13081-2001 |
危险商品运输用罐.装罐设备.蒸汽收集适配器和耦合器 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adapter and coupler) |
BS EN 13082-2001 |
危险商品运输用罐.装罐设备.蒸汽转化阀门 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve) |
BS EN 13083-2001 |
危险商品运输用罐.装罐设备.低部负载和非负载的适配器 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Adapter for bottom loading and unloading) |
BS EN 13084-1-2000 |
独立的工业烟囱.一般要求 |
(Free-standing industrial chimneys - Free-standing industrial chimneys - General requirements) |
BS EN 13084-2-2002 |
独立式工业用烟囱.混凝土烟囱 |
(Free-standing industrial chimneys - Concrete chimneys) |
BS EN 13084-4-2002 |
独立式工业用烟囱.砌砖衬垫.设计和施工 |
(Free-standing industrial chimneys - Brick liners - Design and execution) |
BS EN 13084-5-2005 |
独立式工业用烟囱.砖衬垫材料.产品规范 |
|