标准号 |
中文名称 |
英文名称 |
BS 2S 143-1976 |
铬-镍-铜-钼抗腐蚀钢(沉淀硬化)坯,棒,锻件和部件(930-1080MPa)规范 |
(Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts(930-1080 MPa)) |
BS 2S 146-1976 |
含4%镍-铬-钼空冷淬硬钢(真空电弧重熔)方坯、棒材、锻件及零件规范(1760-1960MPa;限定等圆断面100mm) |
(Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm)) |
BS 2S 147-1976 |
制造螺栓、螺母用的含0.5%镍-铬-钼钢棒规范 |
(Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts) |
BS 2S 149-1976 |
锻制螺栓和螺母用的含1.75%镍-铬-钼钢棒规范 |
(Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts) |
BS 2S 201-2004 |
碳钢线材、铅淬火冷拉碳钢丝和弹簧.高负载的不接地线.规范 |
|
BS 2S 201-2004 |
碳钢线材、铅淬火冷拉碳钢丝和弹簧.高负载的不接地线.规范 |
|
BS 2S 510-1970 |
碳钢薄板和带材规范(430/540 MPa)(适用于焊接) |
(Specification for carbon steel sheet and strip (430/540 MPa) (suitable for welding)) |
BS 2S 511-1970 |
深拉碳薄钢板和带材的规范(280/400 MPa)(适用于焊接) |
(Specification for deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding)) |
BS 2S 513-1970 |
弹簧钢带材规范 |
(Specification for spring steel strip) |
BS 2S 514-1969 |
碳锰钢薄板和带材规范(淬火和回火条件:77/100MPa)(适用于焊接) |
(Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding)) |
BS 2S 515-1969 |
碳锰钢薄板和带材规范(退火的)(退火条件:46/59MPa)(适用于焊接) |
(Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding)) |
BS 2S 92-1964 |
航空材料规范.碳锰钢(适用于焊接)(40/55吨力/平方英寸;限定等圆断面4英寸) |
(Specification for aircraft material - Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in)) |
BS 2S 93-1964 |
航空材料规范.40号钢碳(正火的)(35/45吨力/平方英寸;限定等圆断面6英寸) |
(Specification for aircraft material - ’40’ carbon steel (normalized) (35/45 tonf/sq in: limiting ruling section 6 in)) |
BS 2S 97-1964 |
航空材料规范.每百含2 |
(Specification for aircraft material - 2) |
BS 2S 98-1964 |
航空材料规范.每百含2 |
(Specification for aircraft material - 2) |
BS 2SP 1-1927 |
航空材料规范.钩环 |
(Specification for aircraft material - Shackles) |
BS 2SP 101-104-1956 |
航空用旋转套筒、张力传动杆和锻压钢丝绳末端接头(统一螺纹)规范 |
(Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads) for aircraft) |
BS 2SP 105-1955 |
航空用预成型钢丝绳(W9)的锻压钢丝绳端组件(统一螺纹)规范 |
(Specification for swaged cable-end assemblies (Unified threads) for preformed steel wire rope (W.9) for aircraft) |
BS 2SP 106-1955 |
航空用预成型不腐蚀钢丝绳(W.11)的锻压钢丝绳端组件(统一螺纹)规范 |
(Specification for swaged cable-end assemblies (Unified threads) for preformed non-corrodible steel wire rope (W.11) for aircraft) |
BS 2SP 142 and SP 143-1973 |
按BS L 86(SP 142)和BS L 37(SP 143)材料制成的截成圆角的100°埋头整体铆钉规范 |
(Specification for solid rivets with 100 ?countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials) |
BS 2SP 148-150-1979 |
铝合金统一垫圈规范 |
(Specification for Unified aluminium alloy washers) |
BS 2SP 151-153-1979 |
合金钢统一垫圈规范 |
(Specification for Unified alloy steel washers) |
BS 2SP 154-156-1979 |
耐腐蚀钢统一垫圈规范 |
(Specification for Unified corrosion-resistant steel washers) |
BS 2SP 157-163-1973 |
根据BS L 86(SP 157和163)、BS L 58(SP 160-161)、BS L 37(SP 162)和DTD 204(SP 158-159)材料制成的有通用 |
(Specification for solid rivets with universal head made from BS L 86 (SP 157 and 163), BS L 58 (SP 160 and 161), BS L 37 (SP 162) and DTD 204 (SP 158 and 159) materials) |
BS 2SP 47-1957 |
航空用单盘簧垫圈 |
(Single coil spring washers for aircraft) |
BS 2SP 7-1943 |
航空材料规范.叉形接头(高强度型)(尺寸自4B.A.至) |
(Specification for aircraft material - Fork joints (high tensile type) (for sizes No. 4 B.A. to) |
BS 2SP 77 to 2SP 80-1973 |
圆头形铝和铝合金铆钉规范 |
(Specification for snap head aluminium and aluminium alloy rivets) |
BS 2SP 81 and 2SP 82-1973 |
圆头形高镍铜合金铆钉规范 |
(Specification for snap head high nickel-copper alloy rivets) |
BS 2SP 83 to 85-1973 |
蘑菇头铝合金铆钉规范 |
(Specification for mushroom head aluminium alloy rivets) |
BS 2SP 87 and 2SP 88-1973 |
100°埋头高镍铜合金铆钉规范 |
(Specification for 100 ?countersunk head high nickel-copper alloy rivets) |
BS 2SP 91-92-1973 |
航空用碳素钢蜗杆传动夹子规范 |
(Specification for carbon steel worm drive clamps for aircraft) |
BS 2SP 93-1974 |
航空航天用弹性保护垫圈(丙烯腈-丁二烯)规范 |
(Specification for elastomeric grommets (acrylonitrile-butadiene) for aerospace use) |
BS 2SP 95-1974 |
航空航天用弹性保护垫圈(聚氯丁)规范 |
(Specification for elastomeric grommets (polychloroprene) for aerospace use) |
BS 2SP 96-1982 |
内卡环(英制尺寸)规范 |
(Specification for internal retaining rings (imperial sizes)) |
BS 2T 57-1972 |
4/1镍-铬钢管规范 |
(1150 N/mm(Specification for 4/1 nickel-chromium steel tube (1150 N/mmUP2)) |
BS 2T 66-1980 |
19/10铬-镍耐腐蚀钢管规范(铌稳定的:550MPa)(可焊接) |
(Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)) |
BS 2T 68-1980 |
冷拔18/10铬-镍耐腐蚀钢管规范(铌稳定的:800MPa)(可焊接) |
(Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)) |
BS 2TA 1-1974 |
商用纯钛板材和带材规范(抗拉强度290-420MPa) |
(Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)) |
BS 2TA 10-1974 |
钛铝钒合金板材规范(抗拉强度960-1270MPa) |
(Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)) |
BS 2TA 100-1973 |
锻造钛和钛合金的检验和试验规程 |
(Procedure for inspection and testing of wrought titanium and titanium alloys) |
BS 2TA 11-1974 |
钛铝钒合金机加工棒材和型材规范(抗拉强度900-1160MPa)(限定等圆断面150mm) |
(Specification for bar and section for machining of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)) |
BS 2TA 12-1974 |
钛铝钒合金锻坯规范(抗拉强度900-1160MPa)(限定等圆断面150mm) |
(Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)) |
BS 2TA 13-1974 |
钛铝钒合金锻件规范(抗拉强度900-1160MPa)(限定等圆断面150mm) |
(Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)) |
BS 2TA 2-1973 |
商用纯钛板材和带材规范 |
(抗拉强度390-540 N/mm(Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 N/mmUP2)) |
BS 2TA 21-1973 |
钛铜合金板材和带材规范(抗拉强度540-700MPa) |
(Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)) |
BS 2TA 22-1973 |
钛铜合金棒材和型材规范 |
(抗拉强度540-770 N/mm(Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mmUP2)) |
BS 2TA 23-1973 |
钛铜合金锻坯规范 |
(抗拉强度540-770 N/mm(Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mmUP2)) |
BS 2TA 24-1973 |
钛铜合金锻件规范 |
(抗拉强度540-770 N/mm(Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mmUP2)) |
BS 2TA 28-1974 |
钛铝钒合金锻坯和线材规范(抗拉强度1100-1300MPa)(限定等圆断面20mm)(主要供符合英国标准A系列要求的紧固件 |
() |
BS 2TA 3-1973 |
商用机加工纯钛棒材和型材规范 |
(抗拉强度390-540 N/mm(Specification for bar and section for machining of commercially pure titanium (tensile strength 390-540 N/mmUP2)) |
BS 2TA 4-1973 |
商用纯钛锻造坯料规范 |
(抗拉强度390-540 N/mm(Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mmUP2)) |
BS 2TA 5-1973 |
商用纯钛锻件规范 |
(抗拉强度390-540 N/mm(Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mmUP2)) |
BS 2TA 6-1973 |
商用纯钛板材和带材规范 |
(抗拉强度570-730 N/mm(Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 N/mmUP2)) |
BS 2TA 7-1973 |
商用纯钛机加工棒材和型材规范 |
(抗拉强度540-740 N/mm(Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 N/mmUP2)) |
BS 2TA 8-1973 |
商用纯钛锻造坯料规范 |
(抗拉强度540-740 N/mm(Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mmUP2)) |
BS 2TA 9-1973 |
商用纯钛锻件规范 |
(抗拉强度540-740 N/mm(Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mmUP2)) |
BS 2V 35-1966 |
航空用胶合板规范 |
(Specification for plywood for aeronautical purposes) |
BS 2V 37-1968 |
精加工过的西加方杉木材规范 |
(Specification for Sitka spruce as finished timber) |
BS 2W 11-1967 |
航空用材料规范.预制耐腐蚀钢丝绳 |
(Specification for aircraft material - Preformed corrosion-resisting steel wire rope) |
BS 2W 12-1989 |
预制镀锌碳素钢丝绳规范(米制和英制系列) |
(Specification for preformed zinc coated carbon steel wire rope (metric and inch series)) |
BS 2X 26-2001 |
覆盖飞机的织物的涂布和精整 |
(Doping and finishing schemes for fabric covered aircraft) |
BS 2X 27-1991 |
航空航天用纤维素表面光饰方案规范 |
(Specification for cellulose finishing scheme for aerospace purposes) |
BS 2X 32-1998 |
空间飞行目的用预处理蚀刻油漆腻子的规范 |
(Specification for pre-treatment etch primer for aerospace purposes) |
BS 2X 33-1998 |
航空航天用的两组份环氧腻子规范 |
(Specification for two component epoxy primer for aerospace purposes) |
BS 2X 34-1998 |
空间飞行目的用的两组份的聚氨酯精整规范 |
(Specification for two component polyurethane finish for aerospace purposes) |
BS 2X 35-2003 |
航空航天用选择性可除去的中间涂层 |
(Selectively removable intermediate coating for aerospace purposes) |
BS 3012-1970 |
普通低密度与中密度聚乙烯板规范 |
(Specification for low and intermediate density polythene sheet for general purposes) |
BS 3015-1991 |
机械振动与冲击的名词术语汇编 |
(Glossary of terms relating to mechanical vibration and shock) |
BS 302-3-1987 |
绞合钢丝绳.第3部分:船用镀锌钢丝绳规范 |
(Stranded steel wire ropes - Specification for zinc coated ropes for ships) |
BS 302-5-1987 |
绞合钢丝绳.第5部分:牵引用钢丝绳规范 |
(Stranded steel wire ropes - Specification for ropes for hauling purposes) |
BS 302-6-1987 |
绞合钢丝绳.第6部分:矿井提升用钢丝绳规范 |
(Stranded steel wire ropes - Specification for ropes for mine hoisting) |
BS 302-7-1989 |
绞合钢丝绳.第7部分:通用大直径钢丝绳规范 |
(Stranded steel wire ropes - Specification for large diameter ropes for general purposes) |
BS 302-8-1989 |
绞合钢丝绳.第8部分:高断裂荷载钢丝绳规范 |
(Stranded steel wire ropes - Specification for higher breaking load ropes) |
BS 303-1991 |
涂料用铅铬绿颜料规范 |
(Specification for lead chrome green pigments for paints) |
BS 3031-1996 |
铅酸蓄电池用硫酸规范 |
(Specification for sulfuric acid used in lead-acid batteries) |
BS 3036-1958 |
半封闭式熔断器(额定电流 100A及以下.接地电压240V)规范 |
(Specification - Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth)) |
BS 3037-1-1958 |
起重机轨轮用轮箍规范.第1部分:双法兰平行轮距轮箍 |
(Specification for tyres for crane rail wheels - Double-flanged parallel-tread tyres) |
BS 3037-2-1975 |
起重机轨轮用轮箍规范.第2部分:锻制或轧制双法兰钢轨轮与钢轮箍(米制单位)规范 |
(Specification for tyres for crane rail wheels - Forged or rolled steel double flanged rail wheels and tyres (metric units)) |
BS 3041-1-1977 |
射频连接器.第1部分:一般要求与测量方法规范 |
(Radio-frequency connectors - Specification for general requirements and measuring methods) |
BS 3041-12-1981 |
射频连接器.第12部分:螺纹连接、非匹配的(超高频型)射频同轴连接器规范 |
(Radio-frequency connectors - Specification for r.f. coaxial connectors with screw coupling, unmatched (type UHF)) |
BS 3041-2-1977 |
射频连接器.第2部分:同轴非匹配连接器规范 |
(Radio-frequency connectors - Specification for coaxial unmatched connector) |
BS 3041-7-1996 |
射频连接器.第7部分:有卡口锁的内径为9,5mm(o.374 in)的输出导电体的射频同轴连接器 |
(Radio-frequency connectors - R.F. coaxial connectors with inner diameter of output conductor 9,5 mm (0,374 in) with bayonet lock - Characteristic impedance 50 ohms (Type C)) |
BS 3043-1973 |
医疗放射照相已冲洗的X射线胶片的储存袋规范 |
(Specification for storage envelopes for processed X-ray films for medical radiography) |
BS 3044-1991 |
办公室用家具的设计和选择中人类工效学原则指南 |
(Guide to ergonomics principles in the design and selection of office furniture) |
BS 3046-1981 |
悬挂式软墙面装饰层胶粘剂规范 |
(Specification for adhesives for hanging flexible wallcoverings) |
BS 3047-1988 |
广告画的尺寸规范 |
(Specification for sizes of posters) |
BS 3048-1958 |
烟道气体连续取样与自动分析规程.指示器与记录仪 |
(Code for the continuous sampling and automatic analysis of flue gases: indicators and recorders) |
BS 3054-1959 |
消防员用橡胶绝缘把斧头规范 |
(Specification for fireman’s axe with rubber insulated handle) |
BS 3056-1-1985 |
耐火砖的尺寸.第1部分:多用途耐火砖规范 |
(Sizes of refractory bricks - Specification for multi-purpose bricks) |
BS 3056-2-1985 |
耐火砖的尺寸.第2部分:玻璃熔炉用耐火砖规范 |
(Sizes of refractory bricks - Specification for bricks for use in glass-melting furnaces) |
BS 3056-3-1986 |
耐火砖的尺寸.第3部分:旋转水泥窑用耐火砖规范 |
(Sizes of refractory bricks - Specification for bricks for rotary cement kilns) |
BS 3056-4-1985 |
耐火砖的尺寸.第4部分:电弧炉顶用耐火砖规范 |
Sizes of refractory bricks - Specification for bricks for electric arc furnace roofs |
BS 3056-7-1992 |
耐火砖的尺寸.第7部分:炼钢用碱性砖规范 |
(Sizes of refractory bricks - Specification for basic bricks for steel making) |
BS 3056-8-1987 |
耐火砖的尺寸.第8部分:钢铁水包用砖规范 |
Sizes of refractory bricks - Specification for bricks for ladles |
BS 3062-1985 |
眼镜镜片材料规范 |
Specification for ophthalmic lens materials |
BS 3063-1965 |
管法兰衬垫尺寸规范 |
Specification for dimensions of gaskets for pipe flanges |
BS 3064-1978 |
米制正弦规与正弦台(组合工作台除外)规范 |
Specification for metric sine bars and sine tables (excluding compound tables) |
BS 3065-2001 |
电阻焊.电阻焊设备.机械和电要求 |
(Resistance welding - Resistance welding equipment - Mechanical and electrical requirements) |
BS 3066-1995 |
工程用冷凿及相关用途工具规范 |
(Specification for engineers’ cold chisels and allied tools) |
BS 3071-1986 |
镍铜合金铸件规范 |
(Specification for nickel-copper alloy castings) |
BS 3072-1990 |
镍与镍合金规范:薄板材和中厚板材 |
(Specification for nickel and nickel alloys: sheet and plate) |
BS 3073-1977 |
镍和镍合金带材规范 |
(Specification for nickel and nickel alloys: strip) |
BS 3074-1990 |
镍与镍合金无缝管规范 |
(Specification for nickel and nickel alloys: seamless tube) |
BS 3075-1976 |
镍与镍合金线材规范 |
(Specification for nickel and nickel alloys: wire) |
BS 3076-1990 |
镍与镍合金棒材规范 |
(Specification for nickel and nickel alloys: bar) |
BS 3083-1988 |
普通热浸涂锌和热浸涂铝锌波纹钢板规范 |
(Specification for hot-dip zinc coated and hot-dip aluminium/zinc coated corrugated steel sheets for general purposes) |
BS 3084-1992 |
拉链规范 |
(Specification for slide fasteners) |
BS 3087-1-1991 |
夹扭钳与剪断钳.第1部分:绪论 |
(Pliers and nippers - General introduction) |
BS 3087-10-1991 |
夹扭钳和剪断钳.第10部分:非ISO标准化工具尺寸规范 |
(Pliers and nippers - Specification for dimensions of tools not standardized by ISO) |
BS 3087-11-1991 |
夹扭钳和剪断钳.第11部分:伸缩结合式剪断钳的尺寸和试用值规范 |
(Pliers and nippers - Specification for dimensions and test values of slip joint pliers) |
BS 3087-12-1991 |
夹扭钳和剪断钳.第12部分:工人用夹钳尺寸和结构试用值规范 |
(Pliers and nippers - Specification for dimensions and test values of construction worker’s pincers) |
BS 3087-13-1991 |
夹扭钳和剪断钳.第13部分:木工用夹钳尺寸和试用值规范 |
Pliers and nippers - Specification for dimensions and test values of carpenter`s pincers |
BS 3087-14-1991 |
夹扭钳和剪断钳.第14部分:多用途滑动点夹扭钳尺寸和试用值规范 |
(Pliers and nippers - Specification for dimensions and test values of multiple slip joint pliers) |
BS 3087-2-1986 |
夹扭钳与剪断钳.第2部分:术语 |
(Pliers and nippers - Nomenclature) |
BS 3087-3-1986 |
夹扭钳和剪断钳.第3部分:一般要求规范 |
(Pliers and nippers - Specification for general requirements) |
BS 3087-4-1988 |
夹扭钳和剪断钳.第4部分:试验方法 |
(Pliers and nippers - Methods of test) |
BS 3087-5-1986 |
夹扭钳和剪断钳.第5部分:抓取与操纵用钳子尺寸规范 |
(Pliers and nippers - Specification for dimensions of pliers for gripping and manipulating) |
BS 3087-6-1986 |
夹扭钳和剪断钳.第6部分:工程技术人员和养路工人用钳子的尺寸规范 |
(Pliers and nippers - Specification for dimensions of engineers and lineman’s pliers) |
BS 3087-7-1996 |
老虎钳和剪断钳.第7部分:杠杆式旁剪钳、中心剪丝钳和斜嘴钳尺寸规范 |
(Pliers and nippers - Specification for dimensions of lever assisted side cutting pliers, end and diagonal cutting nippers) |
BS 3087-8-1986 |
夹扭钳和剪断钳.第8部分:中心剪丝钳尺寸规范 |
(Pliers and nippers - Specification for dimensions of end cutting nippers) |