标准号 |
中文名称 |
英文名称 |
BS EN 14362-2-2003 |
纺织物.从偶氮染料中分离出的某些芳族胺的测定方法.通过萃取纤维获得某些偶氮染料的使用的检测 |
(Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Detection of the use of certain azo colorants accessible by extracting the fibres) |
BS EN 14366-2004 |
废水装置噪声的实验室测量 |
|
BS EN 14368-2003 |
人类用水处理用制品.覆石灰石的二氧化锰 |
(Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone) |
BS EN 14369-2003 |
人类用水处理用制品.覆铁粒状活性铝 |
(Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina) |
BS EN 1437-2003 |
塑料管道系统.地下排水排污用管道系统.温度循环和外加负荷结合的耐力试验方法 |
(Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading) |
BS EN 14370-2004 |
表面活性剂.表面张力的测定 |
|
BS EN 14371-2004 |
表面活性剂.发泡能力和发泡度的测定.循环试验方法 |
|
BS EN 14372-2004 |
儿童使用和护理用品.刀叉和喂养工具.安全要求和试验 |
|
BS EN 14375-2005 |
保护儿童的不可重封口的药品包装.要求及试验 |
|
BS EN 1438-1998 |
木材和木制品符号 |
Symbols for timber and wood-based products |
BS EN 14382-2003 |
气压调节站和装置用安全设备.运行压力为100巴以下的气体安全关闭装置 |
(Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for operating pressure up to 100 bar) |
BS EN 14385-2004 |
固定源排放.As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl和V总排放量的测定 |
|
BS EN 14387-2004 |
呼吸保护设备.气体过滤器和组合过滤器.要求、试验和标记 |
|
BS EN 14389-2-2004 |
道路交通噪音减少设备.长期性能评估过程.非声学特性 |
|
BS EN 1439-1997 |
液化石油气(LPG)用可移动可再充气的焊接钢瓶.充气前、充气时和充气后的检验程序 |
(Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Procedure for checking before, during and after filling) |
BS EN 14395-1-2004 |
有机材料对人类生活用水的影响.储水系统中水的感官评定.试验方法 |
|
BS EN 14396-2004 |
人孔用固定梯子 |
|
BS EN 14397-2-2004 |
肥料和灰浸材料.二氧化碳的测定.灰浸材料的方法 |
|
BS EN 14398-1-2003 |
低温容器.大型可运输的非真空绝缘容器.基本要求 |
(Cryogenic vessels - Large transportable non-vacuum insulated vessels - Fundamental requirements) |
BS EN 14398-2-2003 |
低温容器.大型可运输的非真空绝缘容器.设计、制造、检查和试验 |
(Cryogenic vessels - Large transportable non-vacuum insulated vessels - Design, fabrication, inspection and testing) |
BS EN 14398-3-2003 |
低温容器.大型可运输的非真空绝缘容器.操作要求 |
(Cryogenic vessels - Large transportable non-vacuum insulated vessels - Operational requirements) |
BS EN 14399-1-2005 |
预加负荷用高强度结构螺栓组件.一般要求 |
|
BS EN 14399-2-2005 |
预加负荷用高强度结构螺栓组件.预加负荷的适合性试验 |
|
BS EN 14399-3-2005 |
预加负荷用高强度结构螺栓组件.系统HR.六角螺栓和螺母组件 |
|
BS EN 144-1-2000 |
呼吸保护装置.气瓶阀.插入式连接器用螺纹连接 |
(Respiratory protective devices - Gas cylinder valves - Thread connections for insert connector) |
BS EN 144-2-1999 |
呼吸保护装置.气瓶阀.出口连接 |
(Respiratory protective devices - Gas cylinder valves - Outlet connections) |
BS EN 144-3-2003 |
呼吸保护装置.气瓶阀.潜水用Nitrox和氧气气瓶的出口接头 |
(Respiratory protective devices - Gas cylinder valves - Outlet connections for diving gases Nitrox and oxygen) |
BS EN 1440-1997 |
液化石油气(LPG)用可移动可再充气的焊接钢瓶.周期要求 |
(Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic requalification) |
BS EN 14404-2004 |
个人防护设备.跪射姿势工作使用的护膝 |
|
BS EN 14406-2004 |
混凝土结构的保护和维修用产品和系统.试验方法.膨胀率和膨胀扩展的测定 |
|
BS EN 14406-2004 |
混凝土结构的保护和维修用产品和系统.试验方法.膨胀率和膨胀扩展的测定 |
|
BS EN 14407-2004 |
水质.流动水中海底硅藻样品的识别、计数和解释的指南标准 |
|
BS EN 14410-2003 |
自粘胶带.断裂强度和断裂伸长率的测量 |
(Self adhesive tapes - Measurement of breaking strength and elongation at break) |
BS EN 14411-2004 |
瓷砖.定义、分类、特点和标记 |
|
BS EN 14411-2004 |
瓷砖.定义、分类、特点和标记 |
|
BS EN 14412-2004 |
室内空气质量.气体和蒸气浓度测定用扩散样品.选择、使用和维护指南 |
|
BS EN 14412-2004 |
室内空气质量.气体和蒸气浓度测定用扩散样品.选择、使用和维护指南 |
|
BS EN 14413-1-2004 |
娱乐潜水服务.水肺潜水教员培训的相关最低安全要求.等级1 |
|
BS EN 14413-2-2004 |
娱乐潜水服务.水肺潜水教员培训的相关最低安全要求.等级2 |
|
BS EN 14414-2004 |
土工合成织物.测定废料坑耐化学性的筛选试验方法 |
|
BS EN 14415-2004 |
土工合成物隔层.耐浸出性测定的试验方法 |
|
BS EN 14419-2004 |
区域供暖管.直埋式热水供应网用预绝缘粘结管系统.监督系统 |
|
BS EN 1442-1998 |
液化石油气(LPG)用可移动可再冲填焊接钢气瓶.设计和生产 |
(Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction) |
BS EN 14420-2-2005 |
带夹件的软管配件.软管尾部的软管侧面部件 |
|
BS EN 14420-3-2005 |
带夹件的软管配件.栓接或销接夹件 |
|
BS EN 14420-4-2005 |
带夹件的软管配件.法兰连接 |
|
BS EN 14420-5-2005 |
带夹件的软管配件.螺纹连接 |
|
BS EN 14420-6-2005 |
带夹件的软管配件.TW油槽车联接器 |
|
BS EN 14420-7-2005 |
带夹件的软管配件.凸轮锁紧联接器 |
|
BS EN 14420-8-2005 |
带夹件的软管配件.对称联轴节(吉尔曼系统) |
|
BS EN 14424-2005 |
带螺旋箍的软管管件 |
|
BS EN 14427-2004 |
液化石油气(LPG)用可移动的可再充填式全包装复合气瓶.设计和建造 |
|
BS EN 1443-2003 |
烟囱.一般要求 |
(Chimneys - General requirements) |
BS EN 14430-2004 |
釉和搪瓷.高压试验 |
|
BS EN 14431-2005 |
釉和搪瓷.用于建筑钢板的瓷釉涂层的特性 |
|
BS EN 14435-2004 |
呼吸保护设备.设计只与增压供氧一起使用的带半罩式面具的自持式开路压缩气体呼吸设备.要求、试验和标记 |
|
BS EN 14436-2004 |
铜和铜合金.电镀锡带 |
|
BS EN 1444-2001 |
纤维水泥管道.管道敷设和现场施工指南 |
(Fibre-cement pipelines - Guide for laying and on-site work practices) |
BS EN 14450-2005 |
安全存储装置.防盗要求、分类和试验方法.保险柜 |
|
BS EN 14456-2004 |
人类生活用水处理产品.骨炭 |
|
BS EN 14457-2004 |
无槽排水和排污结构中使用的专门部件的一般要求 |
|
BS EN 14458-2004 |
个人护眼设备.消防员用面罩和护目镜及消防员、救护车和急救服务用高性能工业安全头盔 |
|
BS EN 14458-2004 |
个人护眼设备.消防员用面罩和护目镜及消防员、救护车和急救服务用高性能工业安全头盔 |
|
BS EN 1446-1996 |
塑料管道及保护管系统.热塑管.环形挠形测定 |
(Plastics piping and ducting systems.Thermoplastics pipes - Determination of ring flexibility) |
BS EN 14462-2005 |
表面处理设备.包括其辅助操作装置在内的表面处理设备的噪声试验规程.精度等级2和3 |
|
BS EN 14465-2004 |
纺织品.家具装饰织物.规范和试验方法 |
|
BS EN 14467-2004 |
娱乐潜水服务.娱乐性水肺潜水服务提供者的要求 |
|
BS EN 14468-2-2005 |
乒乓球.球网组件孔隙.要求和试验方法 |
|
BS EN 14469-1-2004 |
颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.组分和基本混合料的制备 |
|
BS EN 14469-1-2004 |
颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.组分和基本混合料的制备 |
|
BS EN 14469-2-2004 |
颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.试样的制备 |
|
BS EN 14469-3-2004 |
颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.白颜料的相对染色力测定 |
|
BS EN 14469-4-2004 |
颜料和填充剂.增塑聚氯乙烯(PVC-P)中着色剂的检验.着色剂扩散的测定 |
|
BS EN 1447-1997 |
塑料管道系统.玻璃增强热固性塑料管道.长期耐内压能力的测定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure) |
BS EN 14470-1-2004 |
防火安全存储柜.易燃液体用安全存储柜 |
|
BS EN 1448-1997 |
塑料管道系统.玻璃增强热固塑料(GRP)组件.带弹性密封件的刚性锁紧套筒接合的设计查验试验方法 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals) |
BS EN 14480-2004 |
表面活性剂.阴离子表面活性剂的测定.电位测定两相滴定法 |
|
BS EN 14480-2004 |
表面活性剂.阴离子表面活性剂的测定.电位测定两相滴定法 |
|
BS EN 14481-2003 |
接触食品的材料和物品.塑料.接触脂肪测定的试验方法 |
(Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact) |
BS EN 14483-1-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.室温下耐酸化学腐蚀性的测定 |
|
BS EN 14483-1-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.室温下耐酸化学腐蚀性的测定 |
|
BS EN 14483-2-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.耐沸酸、中性液和/或其蒸气的化学腐蚀性的测定 |
|
BS EN 14483-2-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.耐沸酸、中性液和/或其蒸气的化学腐蚀性的测定 |
|
BS EN 14483-3-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.用六角容器测定耐碱液化学腐蚀性 |
|
BS EN 14483-3-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.用六角容器测定耐碱液化学腐蚀性 |
|
BS EN 14483-4-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.用圆柱形容器测定耐碱液化学腐蚀性 |
|
BS EN 14483-4-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.用圆柱形容器测定耐碱液化学腐蚀性 |
|
BS EN 14483-5-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.在封闭系统中测定耐化学腐蚀性 |
|
BS EN 14483-5-2004 |
釉瓷和搪瓷.耐化学腐蚀性的测定.在封闭系统中测定耐化学腐蚀性 |
|
BS EN 14484-2004 |
医疗信息学.EU数据保护指令中包含的个人医疗数据的国际传送.高级安全政策 |
|
BS EN 14484-2004 |
医疗信息学.EU数据保护指令中包含的个人医疗数据的国际传送.高级安全政策 |
|
BS EN 14485-2004 |
医疗信息学.EU数据保护指令国际应用部分中的个人医疗数据的处理指南 |
|
BS EN 14488-4-2005 |
喷射混凝土试验.用直接拉伸法测定泥芯的粘结强度 |
|
BS EN 1449-1997 |
塑料管道系统.玻璃纤维增强热固性塑料(GRP)件.查检混凝土套管结合设计的试验方法 |
(Plastics piping systems - Glass reinforced thermosetting plastics (GRP) components - Test methods to prove the design of cemented socket-and-spigot joints) |
BS EN 14493-2002 |
结构胶粘剂.在撞击条件下高强度胶粘剂的动态耐劈裂性的测定.楔牢法 |
(Structural adhesives - Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions - Wedge impact method) |
BS EN 14499-2004 |
铺地织物.地毯衬垫的最低要求 |
|
BS EN 145-1998 |
呼吸保护装置.自给式闭路压缩氧型或压缩氧氮型呼吸器.要求,试验,标记 |
(Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking) |
BS EN 1450-1997 |
塑料管道系统.玻璃增强热固塑料(GRP)组件.螺栓法兰连接的设计查验试验方法 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints) |
BS EN 14503-2004 |
内河航行船舶.内河航运港 |
|
BS EN 14504-2004 |
内河航运船只.浮动码头.要求和试验 |
|
BS EN 14508-2003 |
邮政服务.服务质量.单件非优先邮件和二级邮件全程服务运送时间的测量 |
(Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail) |
BS EN 1451-1-2000 |
建筑物结构内土壤和废水排出(低和高温)用塑料管道系统.聚丙烯(PP).管道,配件和系统规范 |
(Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Specifications for pipes, fittings and the system) |
BS EN 14511-1-2004 |
房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.术语和定义 |
|
BS EN 14511-2-2004 |
房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.试验条件 |
|
BS EN 14511-3-2004 |
房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.试验方法 |
|
BS EN 14511-3-2004 |
房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.试验方法 |
|
BS EN 14511-4-2004 |
房间取暖和制冷用带电动压缩机的空气调节装置、液冷组件和热泵.要求 |
|
BS EN 14514-2005 |
航天工程标准.功能分析 |
|
BS EN 14517-2004 |
石油及其产品的试验方法.BS 2000-526:液体石油产品.汽油中烃类和氧化物的测定.多维气相色谱法 |
|
BS EN 14517-2004 |
石油及其产品的试验方法.BS 2000-526:液体石油产品.汽油中烃类和氧化物的测定.多维气相色谱法 |
|
BS EN 1452-1-2000 |
供水塑料管道系统.非塑化聚氯乙烯(PVC-U).通则 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - General) |
BS EN 1452-2-2000 |
供水塑料管道系统.非塑化聚氯乙烯(PVC-U).管道 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Pipes) |
BS EN 1452-3-2000 |
供水塑料管道系统.非塑化聚氯乙烯(PVC-U).配件 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Fittings) |
BS EN 1452-4-2000 |
供水塑料管道系统.非塑化聚氯乙烯(PVC-U).阀门和附属设备 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Valves and ancillary equipment) |
BS EN 1452-5-2000 |
供水塑料管道系统.非塑化聚氯乙烯(PVC-U).为系统目的适用性 |
(Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Fitness for purpose of the system) |
BS EN 14521-2004 |
弹性地板覆盖物.带装饰层的有或没有泡沫背衬的光滑橡胶地板覆盖物的规范 |
|
BS EN 14524-2004 |
食品.贻贝中okadaic酸的测定.固相萃取清洁、衍生和荧光检测的HPLC法 |
|
BS EN 14525-2005 |
不同材料管道用球墨铸铁大公差联接器和法兰接头:球墨铸铁、灰铸铁、钢、PVC-U、PE和纤维水泥 |
|
BS EN 14526-2004 |
食品.贻贝中的石蛤毒素和dc-石蛤毒素的测定.使用带过氧化物和过碘酸盐氧化物的柱前衍生的HPLC法 |
|
BS EN 1453-1-2000 |
建筑物内泥土和废水排放(低和高温)结构壁管道的塑料管道系统.非塑化聚氯乙烯(PVC-U)的管道和系统规范 |
(Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly (vinyl chloride) (PVC-U) - Specifications for pipes and) |