标准号 |
中文名称 |
英文名称 |
| BS EN ISO 13943-2000 |
防火安全.词汇 |
(Fire safety - Vocabulary) |
| BS EN ISO 13969-2004 |
奶和奶制品.微生物抑制剂试验的标准化描述指南 |
|
| BS EN ISO 13969-2004 |
奶和奶制品.微生物抑制剂试验的标准化描述指南 |
|
| BS EN ISO 13982-2-2005 |
防固体颗粒用防护服.测定细粒气溶胶向服装内渗漏量的试验方法 |
|
| BS EN ISO 13995-2001 |
防护服.机械性能.材料抗穿刺性和抗撕裂性测定的试验方法 |
(Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials) |
| BS EN ISO 13997-1999 |
防护服.机械特性.抗尖锐物切割特性的测定 |
(Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects) |
| BS EN ISO 13998-2003 |
防护服.防小折刀切割和刺穿的围裙、裤子和背心 |
(Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives) |
| BS EN ISO 140-1-1998 |
声学.建筑物和建筑构件的隔音测量.第1部分:抑制侧向传输的实验室试验装置的要求 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Requirements for laboratory test facilities with suppressed flanking transmission) |
| BS EN ISO 140-11-2005 |
声学.建筑物和建筑构件的隔声测量.轻型标准楼板上地板覆盖物传递冲击声音降低的实验室测量 |
|
| BS EN ISO 140-12-2000 |
声学.建筑物和建筑构件的隔音测量.活地板的房间对房间空气和冲击声隔绝的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor) |
| BS EN ISO 140-14-2004 |
声学.建筑物和建筑构件的隔音测量.第1部分:现场特殊条件下指南 |
|
| BS EN ISO 140-3-1995 |
声学.建筑物和建筑构件的隔音测量.第3部分:建筑物构件的气载音响隔离的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurement of airborne sound insulation of building elements) |
| BS EN ISO 140-4-1998 |
声学.建筑物和建筑构件的隔音测量.房间之间气载声音隔绝的场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Field measurements of airborne sound insulation between rooms) |
| BS EN ISO 140-5-1998 |
声学.建筑物和建筑构件的隔音测量.第5部分:建筑物立面构件及其立面气载声音隔离的现场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Field measurements of airborne sound insulation of facade elements and facades) |
| BS EN ISO 140-6-1998 |
声学.建筑物和建筑构件的隔音测量.地板冲击声隔绝的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurements of impact sound insulation of floors) |
| BS EN ISO 140-7-1998 |
声学.建筑物和建筑构件的隔音测量.地板冲击声隔绝的场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Field measurements of impact sound insulation of floors) |
| BS EN ISO 140-8-1998 |
声学.建筑物和建筑构件的隔音测量.第8部分:减少对标准地面覆盖层的撞击噪音传播的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard fl) |
| BS EN ISO 14001-1996 |
环境管理系统.使用指南规范 |
(Environmental management systems - Specification with guidance for use) |
| BS EN ISO 14001-2004 |
环境管理系统.有使用指南的要求 |
|
| BS EN ISO 1401-2000 |
农业喷雾机用橡胶软管 |
(Rubber hoses for agricultural spraying) |
| BS EN ISO 1402-1997 |
橡胶和塑料软管及软管组件.液压静力试验 |
(Rubber and plastics hoses and hose assemblies - Hydrostatic testing) |
| BS EN ISO 14020-2001 |
环境标签和声明.一般原则 |
(Environmental labels and declarations - General principles) |
| BS EN ISO 1403-1996 |
一般水用织物增强橡胶软管.规范 |
(Rubber hoses, textile-reinforced, for general-purpose water applications - Specification) |
| BS EN ISO 14031-2000 |
环境管理.环境性能评价.导则 |
(Environmental management - Environmental performance evaluation - Guidelines) |
| BS EN ISO 14040-1997 |
环境管理.生命周期评估.原则和框架 |
(Environmental management - Life cycle assessment - Principles and framework) |
| BS EN ISO 14041-1998 |
环境管理.生物圈评价.目标和范围的定义及资源分析 |
(Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis) |
| BS EN ISO 14042-2000 |
环境管理.生物圈管理.生物圈影响评定 |
(Environmental management - Life cycle management - Life cycle impact assessment) |
| BS EN ISO 14043-2000 |
环境管理.生物圈管理.生物圈解释 |
(Environmental management - Life cycle assessment - Life cycle interpretation) |
| BS EN ISO 14113-1997 |
气焊设备.能承受最大检验设计气压为450巴的压缩和液化气用橡胶和塑料软管组件 |
(Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar) |
| BS EN ISO 14114-1999 |
气焊设备.焊接,切割和连接过程的乙炔多功能系统.一般要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements) |
| BS EN ISO 14122-1-2001 |
机器安全.机器接近的固定方式.两种水平之间的固定方式的选择 |
(Safety of machinery - Permanent means of access to machinery - Choice of a fixed means of access between two levels) |
| BS EN ISO 14122-2-2001 |
机器安全.机器接近的固定方式.工作平台和通路 |
(Safety of machinery - Permanent means of access to machinery - Working platforms and walkways) |
| BS EN ISO 14122-3-2001 |
机器安全.机器接近的固定方式.楼梯、梯子和护栏 |
(Safety of machinery - Permanent means of access to machinery - Stairways, stepladders and guard-rails) |
| BS EN ISO 14125-1998 |
纤维增强塑料复合材料.挠性性能的测定 |
(Fibre-reinforced plastic composites - Determination of flexural properties) |
| BS EN ISO 14126-1999 |
纤维增强塑料混合物.水平方向压缩能力的测定 |
(Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction) |
| BS EN ISO 14129-1998 |
纤维增强塑料复合物.用 |
(Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the) |
| BS EN ISO 14130-1998 |
纤维增强塑料复合物.短束法对表观层间剪切强度的测定 |
(Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method) |
| BS EN ISO 14155-1-2003 |
人用医疗设备的临床调查.一般要求 |
(Clinical investigation of medical devices for human subjects - General requirements) |
| BS EN ISO 14155-2-2003 |
医学研究受验者用医疗器械的临床调查.临床调查规划 |
(Clinical investigation of medical devices for human subjects - Clinical investigation plans) |
| BS EN ISO 14159-2004 |
机械安全.机械设计的卫生要求 |
|
| BS EN ISO 14160-1998 |
一次性医用设备混合动物源材料的消毒.液体消毒液消毒的确认和常规管理 |
(Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid chemical sterilants) |
| BS EN ISO 14161-2001 |
医疗保健产品的消毒.生物指示器.结果的选择、使用和说明用指南 |
(Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results) |
| BS EN ISO 14163-1998 |
声学.消音器噪声控制指南 |
(Acoustics - Guidelines for noise control by silencers) |
| BS EN ISO 14182-2000 |
动物饲料.有机磷农药残留物的测定.气相色谱法 |
(Animal feeding stuff - Determination of residues of organophosphorus pesticides - Gas chromatographic method) |
| BS EN ISO 14184-1-1999 |
织物.甲醛的测定.游离的和水解态甲醛(水萃取法) |
(Textiles - Determination of formaldehyde - Free and hydrolyzed formaldehyde (water extraction method)) |
| BS EN ISO 14184-2-1998 |
纺织品.甲醛的测定.释放的甲醛(蒸气吸收法) |
(Textiles - Determination of formaldehyde - Released formaldehyde (vapour absorption method)) |
| BS EN ISO 1421-1998 |
橡胶或塑料涂层织物.拉伸强度和断裂伸长的测定 |
(Rubber-or plastics-coated fabrics - Determination of tensile strength and elongation at break) |
| BS EN ISO 14233-2003 |
牙科学.聚合基模料 |
(Dentistry - Polymer-based die materials) |
| BS EN ISO 14246-2001 |
可移动的气体钢瓶.气体钢瓶阀门.生产试验和检验 |
(Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections) |
| BS EN ISO 14253-1-1999 |
几何产品规范(GPS).通过工件测量和测量设备进行检验.用规范对一致性或不一致性进行检验的判定规则 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Decision rules for proving conformance or non-conformance with specifications) |
| BS EN ISO 14257-2001 |
声学.为评估其声学性能对工作室空间声音分布曲线的测量和参数描述 |
(Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance) |
| BS EN ISO 14268-2003 |
皮革.物理和机械试验.水蒸气渗透性的测定 |
(Leather - Physical and mechanical tests - Determination of water vapour permeability) |
| BS EN ISO 14270-2001 |
电阻点焊、滚焊和浮凸焊接机械剥离试验的程序和样品尺寸 |
(Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds) |
| BS EN ISO 14271-2001 |
电阻点焊、凸焊和滚焊的维氏硬度试验(低荷载和超微硬度) |
(Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)) |
| BS EN ISO 14272-2001 |
电阻点焊和浮凸焊接十字形抗拉试验的程序和样品尺寸 |
(Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds) |
| BS EN ISO 14273-2001 |
电阻点焊、缝焊和浮凸焊接剪切试验的程序和样品尺寸 |
(Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds) |
| BS EN ISO 14284-2002 |
钢铁.测定化学成分用的样品的取样和制备 |
(Steel and iron - Sampling and preparation of samples for the determination of chemical composition) |
| BS EN ISO 14310-2002 |
石油和天然气工业.井下设备.装填器和沙桥卡钻 |
(Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs) |
| BS EN ISO 14314-2004 |
往复式内燃机.反冲起动设备.一般安全要求 |
|
| BS EN ISO 14314-2004 |
往复式内燃机.反冲起动设备.一般安全要求 |
|
| BS EN ISO 14324-2003 |
电阻点焊.焊接有损试验.点焊接头的疲劳试验方法 |
(Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints) |
| BS EN ISO 14327-2004 |
电阻焊接.电阻点焊、凸焊和缝焊用可焊性瓣轮的测定规程 |
|
| BS EN ISO 14329-2003 |
电阻点焊.焊接有损试验.电阻点焊、缝焊和凸焊的故障类型和几何测量 |
(Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds) |
| BS EN ISO 14344-2005 |
焊接和有关处理.焊剂和气体保护弧焊法.消耗品的采购导则 |
|
| BS EN ISO 14356-2003 |
牙科学.复制材料 |
(Dentistry - Duplicating material) |
| BS EN ISO 14372-2001 |
焊接耗材.通过可扩散氢测量法测定手工电弧焊焊条的抗湿性 |
(Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen) |
| BS EN ISO 14402-1999 |
水质.流量分析方法对苯酚指数的测定(FIA和CFA) |
(Water quality - Determination of phenol index by flow analysis (FIA and CFA)) |
| BS EN ISO 14403-2002 |
水质.通过连续流量分析测定总氰化物和游离氰化物含量 |
(Water quality - Determination of total cyanide and free cyanide by continuous flow analysis) |
| BS EN ISO 14419-1999 |
纺织材料.耐油性.耐碳氢化合物试验 |
(Textiles - Oil repellency - Hydrocarbon resistance test) |
| BS EN ISO 14438-2002 |
建筑物用玻璃.能量平衡值的测定.计算法 |
(Glass in building - Determination of energy balance value - Calculation method) |
| BS EN ISO 14460-1999 |
赛车驾驶员的防护服装.对热和火焰的防护.性能要求和试验方法 |
(Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods) |
| BS EN ISO 14501-1999 |
奶和奶粉.黄曲霉毒素M1含量的测定.用免疫亲和色谱法提炼和用高效液体色谱分析法测定 |
(Milk and milk powder - Determination of aflatoxin MDOWN1 content - Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography) |
| BS EN ISO 14509-2001 |
小型船舶.动力娱乐船发出的气载噪声的测定 |
(Small craft - Measurement of airborne sound emitted by powered recreational craft) |
| BS EN ISO 14526-1-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).名称与符号系统和规范基础 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14526-2-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).试样的制备和特性的测定 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Preparation of test specimens and determination of properties) |
| BS EN ISO 14526-3-2000 |
塑料.酚醛粉末模塑化合物(PF-PMCs).对所选择模塑化合物的要求 |
(Plastics - Phenolic powder moulding compounds (PF-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14527-1-2000 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).名称与符号系统和规范基础 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14527-2-2000 |
试样制备和特性测定 |
(Preparation of test specimens and determination of properties) |
| BS EN ISO 14527-3-2000 |
塑料.脲醛和脲/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs).对所选择模塑化合物的要求 |
(Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14528-1-2000 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).名称与符号系统和规范基础 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14528-2-2000 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).试样制备和特性测定 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Preparation of test specimens and determination of properties) |
| BS EN ISO 14528-3-2000 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).对所选择的模塑化合物的要求 |
(Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14529-1-2000 |
塑料.蜜胺酚醛粉末模塑化合物(MF-PMCs).名称与符号系统和规范基础 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14529-2-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).试样制备和特性测定 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Preparation of test specimens and determination of properties) |
| BS EN ISO 14529-3-2000 |
塑料.蜜胺/酚醛粉末模塑化合物(MP-PMCs).对所选择模塑化合物的要求 |
(Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14530-1-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).名称与符号系统和规范基础 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Designation system and basis for specifications) |
| BS EN ISO 14530-2-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).试样的制备和特性测定 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Preparation of test specimens and determination of properties) |
| BS EN ISO 14530-3-2000 |
塑料.非饱和聚酯粉末模塑化合物(UP-PMCs).对所选择模塑化合物的要求 |
(Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Requirements for selected moulding compounds) |
| BS EN ISO 14534-2002 |
眼科光学.接触镜片和接触透镜护理制品.基础要求 |
(Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements) |
| BS EN ISO 14539-2002 |
操作工业机器人.带抓爪的物料搬运设备.词汇和特征表示 |
(Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics) |
| BS EN ISO 14554-1-2001 |
焊接的质量要求.金属材料的耐焊性.全面质量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Comprehensive quality requirements) |
| BS EN ISO 14554-2-2001 |
焊接的质量要求.金属材料的耐焊性.基本质量要求 |
(Quality requirements for welding - Resistance welding of metallic materials - Elementary quality requirements) |
| BS EN ISO 14555-1998 |
焊接.金属材料的电弧螺栓焊接 |
(Welding - Arc stud welding of metallic materials) |
| BS EN ISO 14556-2000 |
钢.却贝V形切痕摆式冲击试验.仪器试验法 |
(Steel - Charpy V-notch pendulum impact test - Instrumented test method) |
| BS EN ISO 14557-2003 |
消防水龙带.橡胶和塑料抽吸软管和软管组件 |
(Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies) |
| BS EN ISO 14565-2001 |
动物饲料.维生素A含量的测定.使用高性能液相色谱法 |
(Animal feeding stuffs - Determination of vitamin A content - Method using high-performance liquid chromatography) |
| BS EN ISO 14577-1-2002 |
冶金材料.测量材料硬度和参数用的仪表压痕试验.试验方法 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Test method) |
| BS EN ISO 14577-2-2002 |
冶金材料.测量金属硬度和参数用的仪表压痕试验.试验机器的校验和校准 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Verification and calibration of testing machines) |
| BS EN ISO 14577-3-2002 |
冶金材料.测量金属硬度和参数用的仪表压痕试验.校对用块规的校准 |
(Metallic materials - Instrumented indentation test for hardness and materials parameters - Calibration of reference blocks) |
| BS EN ISO 14579-2001 |
圆柱头内六角螺钉 |
(Hexalobular socket head cap screws) |
| BS EN ISO 14580-2001 |
凸圆头内六角螺钉 |
(Hexalobular socket cheese head screws) |
| BS EN ISO 14583-2001 |
平头内六角螺钉 |
(Hexalobular socket pan head screws) |
| BS EN ISO 14584-2001 |
半埋头内六角螺钉 |
(Hexalobular socket raised countersunk head screws) |
| BS EN ISO 14585-2001 |
平头内六角攻丝螺钉 |
(Hexalobular socket pan head tapping screws) |
| BS EN ISO 14586-2001 |
埋头内六角攻丝螺钉 |
(Hexalobular socket countersunk head tapping screws) |
| BS EN ISO 14587-2001 |
半埋头(椭圆形)内六角攻丝螺钉 |
(Hexalobular socket raised countersunk (oval) head tapping screws) |
| BS EN ISO 14588-2001 |
沉头铆钉.术语和定义 |
(Blind rivets - Terminology and definitions) |
| BS EN ISO 14589-2001 |
沉头铆钉,机械试验 |
(Blind rivets - Mechanical testing) |
| BS EN ISO 14596-2002 |
石油及其产品的试验方法.硫含量测定.波长色散X射线荧光光谱法 |
(Methods of test for petroleum and its products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry) |
| BS EN ISO 14597-1999 |
石油产品.钒和镍含量的测定.波长分散X射线荧光分光光谱法 |
(Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry) |
| BS EN ISO 1460-1995 |
金属镀层.铁类材料的热浸镀锌涂层.用重量测定法测定单位面积重量 |
(Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area) |
| BS EN ISO 14602-1998 |
稳定的外科植入物.骨接合术用植入物.特殊要求 |
(Non-active surgical implants - Implants for osteosynthesis - Particular requirements) |
| BS EN ISO 1461-1999 |
加工钢铁制品的热镀锌层.规格和试验方法 |
(Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods) |
| BS EN ISO 14620-1-2003 |
航天系统.安全要求.系统安全 |
(Space systems - Safety requirements - System safety) |
| BS EN ISO 1463-1984 |
金属和氧化物镀层.镀层厚度的测定.显微镜法 |
(Metallic and oxide coatings - Measurement of coating thickness - Microscopical method) |
| BS EN ISO 1463-2005 |
金属和氧化物覆盖层.覆盖层厚度的测定.显微镜法 |
|
| BS EN ISO 14630-1998 |
非活动外科植入物的一般要求 |
(General requirements for non-active surgical implants) |
| BS EN ISO 14630-2005 |
非有源外科植入物.一般要求 |
|
| BS EN ISO 14631-1999 |
冲击改良的聚苯乙烯(PS-I)挤压片.要求和试验方法 |
(Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods) |
| BS EN ISO 14632-1999 |
聚乙烯(PE-HD)的挤压薄板.要求和试验方法 |
(Extruded sheets of polyethylene (PE-HD) - Requirements and test methods) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com