标准号 |
中文名称 |
英文名称 |
BS 3473-4.2-1989 |
制作实验室玻璃器皿用玻璃的耐化学腐蚀性.第4部分:玻璃容器内表面耐水解性的测定方法.第2节:火焰光度测定法 |
(Chemical resistance of glass used in the production of laboratory glassware - Methods for determination of hydrolytic resistance of the interior surfaces of glass containers - Determination by flame p) |
BS 3473-5-1987 |
制作实验室玻璃器皿用玻璃的耐化学腐蚀性.玻璃耐100℃ 6 mol/L盐酸腐蚀性 |
(Chemical resistance of glass used in the production of laboratory glassware - Method for determination of resistance of glass to attack by 6 mol/L hydrochloric acid at 100 鳦) |
BS 3475-1976 |
医院用的碗架规范 |
(Specification for bowl stands for use in hospitals) |
BS 3482-1-1991 |
干燥剂试验方法.第1部分:试验样品的取样、制备和储存 |
(Methods of test for desiccants - Sampling, and preparation and storage of test samples) |
BS 3482-10-1991 |
干燥剂试验方法.第10部分:容积密度(干组份)测定 |
(Methods of test for desiccants - Determination of bulk density (dry basis)) |
BS 3482-11-1991 |
干燥剂试验方法.第11部分:易碎性物和粉末含量的测定 |
(Methods of test for desiccants - Determination of friability and dust content) |
BS 3482-2-1991 |
干燥剂试验方法.第2部分:含水量测定 |
(Methods of test for desiccants - Determination of moisture content) |
BS 3482-3-1991 |
干燥剂试验方法.第3部分:pH值测定 |
(Methods of test for desiccants - Determination of pH) |
BS 3482-4-1991 |
干燥剂试验方法.第4部分:水溶性氯化物含量的测定 |
(Methods of test for desiccants - Determination of water-soluble chlorides content) |
BS 3482-5-1991 |
干燥剂试验方法.第5部分:水溶性硫酸盐含量的测定 |
(Methods of test for desiccants - Determination of water-soluble sulphates content) |
BS 3482-6-1991 |
干燥剂试验方法.第6部分:吸水能力的测定 |
(Methods of test for desiccants - Determination of adsorptive capacity) |
BS 3482-7-1991 |
干燥剂试验方法.第7部分:粒度大小的测定 |
(Methods of test for desiccants - Determination of particle size) |
BS 3482-8-1991 |
干燥剂试验方法.第8部分:氨和氨混合物的评定 |
(Methods of test for desiccants - Estimation of ammonia and ammonium compounds content) |
BS 3482-9-1991 |
干燥剂试验方法.第9部分:氯化钴含量的测定 |
(Methods of test for desiccants - Determination of cobalt chloride content) |
BS 3483-0-1990 |
涂料用颜料的试验方法.一般介绍 |
(Methods for testing pigments for paints - General introduction) |
BS 3483-A1-1983 |
涂料用颜料的试验方法.第A1部分:颜色的比较 |
(Methods for testing pigments for paints - Comparison of colour) |
BS 3483-A7-1994 |
涂料用颜料的试验方法.饱和色系统中的白、黑和有色颜料的比色法 |
(Methods for testing pigments for paints - Colorimetric method for the comparison of the colours, in full-shade systems, of white, black and coloured pigments) |
BS 3483-B3-1982 |
涂料用颜料的试验方法.第B3部分:筛残余物的测定(用人工水法) |
(Methods for testing pigments for paints - Determination of residue on sieve (water method, using a manual procedure)) |
BS 3483-C3-1982 |
涂料用颜料的试验方法.第C3部分:水萃取物的酸度和碱度的测定 |
(Methods for testing pigments for paints - Determination of acidity or alkalinity of the aqueous extract) |
BS 3483-C7-1980 |
涂料用颜料的试验方法.第C7部分:耐色料扩散性的比较 |
(Methods for testing pigments for paints - Comparison of resistance to bleeding) |
BS 3483-C8-1980 |
涂料用颜料的试验方法.第C8部分:热稳定性的比较 |
(Methods for testing pigments for paints - Comparison of heat stability) |
BS 3484-1-1992 |
书写墨水.蓝黑墨水的规范 |
(Record inks - Specification for blue-black inks) |
BS 3484-2-1994 |
书写墨水.耐久墨水的规范 |
(Record inks - Specification for permanent inks) |
BS 3486-1-1996 |
农业用机械,工具用轮子的规格.车轮轮辋固定尺寸的规格 |
(Specification for wheels for agricultural machinery, implements and trailers - Specification for wheel-to-hub fixing dimensions) |
BS 3487-4-1988 |
气管.第4部分:科尔型导气管规范 |
(Tracheal tubes - Specification for tubes of the Cole type) |
BS 3488-1987 |
工业用无水羊毛脂规范 |
(Specification for technical anhydrous lanolin) |
BS 3492-1987 |
包括航空燃油的石油产品的公路和铁路油槽车用软管及软管总成规范 |
(Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels) |
BS 3495-1972 |
铝垃圾箱规范 |
(Specification for aluminium refuse storage containers) |
BS 350-1-1974 |
换算系数和表.第1部分:表的基储换算系数 |
(Conversion factors and tables - Basis of tables - Conversion factors) |
BS 350-2004 |
单位的换算因数 |
|
BS 3502-3-1993 |
塑料和橡胶材料用符号.配料成分符号一览表 |
(Symbols for plastics and rubber materials - Schedule for symbols for compounding ingredients) |
BS 3504-1962 |
电子管阴极用镁活性镍规范 |
(Specification for magnesium-activated nickel for cathodes of electronic tubes and valves) |
BS 3506-1969 |
轻便型工业用未增塑聚氯乙烯管规范 |
(Specification for unplasticized PVC pipe for industrial uses) |
BS 3507-1976 |
整牙用的线带及牙科用的结扎线规范 |
(Specification - Orthodontic wire and tape and dental ligature wire) |
BS 3509-1962 |
管形酒精水平仪规范 |
(Specification for spirit level vials) |
BS 3510-1968 |
表示电离辐射实际存在或可能存在的基本符号规范 |
(Specification for a basic symbol to denote the actual or potential presence of ionizing radiation) |
BS 3517-1991 |
实验室玻璃器皿的热冲击试验方法 |
(Methods for thermal shock tests on laboratory glassware) |
BS 3518-1-1993 |
疲劳试验方法.一般原理指南 |
(Methods of fatigue testing - Methods of fatigue testing - Guide to general principles) |
BS 3518-2-1962 |
疲劳试验方法.第2部分:回转弯曲疲劳试验 |
(Methods of fatigue testing - Rotating bending fatigue tests) |
BS 3518-3-1963 |
疲劳试验方法.第3部分:直接应力疲劳试验 |
(Methods of fatigue testing - Direct stress fatigue tests) |
BS 3520-1962 |
牙科用锻造锻金属合金丝规范 |
(Specification for dental wrought precious metal alloy wire) |
BS 3521-2-1991 |
眼镜镜片和眼镜架术语.第2部分:眼镜架术语词汇 |
(Terms relating to ophthalmic lenses and spectacle frames - Glossary of terms relating to spectacle frames) |
BS 3522-1962 |
外科用皮下注射针头(流尔式针座) |
(Specification for hypodermic surgical mounted needles (Luer fitting)) |
BS 3523-1991 |
用氯化钴浸的粒状干燥剂硅胶规范 |
(Specification for granular desiccant silica gel impregnated with cobalt chloride) |
BS 3529-1962 |
内燃机用飞轮壳座垫和托架的尺寸规范 |
(Specification for dimensions of flywheel housing mounting pads and brackets for i.c. engines) |
BS 3531-11-1991 |
骨结合术用外科植入物.第11部分:平行脚U形钉规范 |
(Implants for osteosynthesis - Implants for osteosynthesis - Specification for staples with parallel legs) |
BS 3531-14.2-1990 |
骨接合术用外科植入物.骨髓腔内钉接物系列.髓用钉(鲁施型)和插入导引器/摘取器规范 |
(Implants for osteosynthesis - Intramedullary nailing systems - Specification for medullary pins (Rush type) and introducer/extractors) |
BS 3531-15-1992 |
骨结合术用外科植入物.第15部分:成人股骨端固定用器件规范 |
(Implants for osteosynthesis - Specification for devices for the fixation of the ends of the femur in adults) |
BS 3531-23.1-1991 |
接骨用植入物.骨板.弯曲强度和刚度的测定方法 |
(Implants for osteosynthesis - Bone plates - Method for determination of bending strength and stiffness) |
BS 3531-23.2-1993 |
接骨用植入物.骨板.与4.5mm、4.2mm、4.0mm、3.9mm、3.5mm和2.9mm公称尺寸螺钉一起使用的孔和槽的规范 |
Implants for osteosynthesis - Bone plates - Specification for holes and slots for use with screws of 4,5 mm, 4,2 mm, 4,0 mm, 3,9 mm, 3,5 mm and 2,9 mm nominal sizes |
BS 3531-23.3-1991 |
外科植入物.金属骨板.相应于具有不对称螺纹及球形底面的螺钉的孔 |
(Implants for osteosynthesis - Bone plates - Specification for holes corresponding to screws with asymmetrical thread and spherical undersurfaces) |
BS 3531-5.1-1997 |
骨接合术用外科植入物.骨螺钉和辅助装置.六角凹头螺钉规范 |
(Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for keys for use with screws having heads with hexagon socket) |
BS 3531-5.2-1990 |
骨接合术用外科植入物.第5部分:骨螺钉和辅助装置.第2节:单槽头和十字槽头螺钉旋具规范 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for screwdrivers for screws having heads with single slot, cruciate slot or cross-recess |
BS 3531-5.3-1991 |
外科植入物.不对称螺纹的六角头球面颈金属骨螺钉.尺寸 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for the dimensions of screws having hexagonal drive connection, spherical under-surfaces and asymmetrical thread |
BS 3531-5.4-1993 |
接骨用植入物.接骨螺钉和辅助设备.有对称和不对称螺纹及圆锥形底面的螺钉规范 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for screws having symmetrical and asymmetrical thread and conical undersurfaces |
BS 3531-5.5-1990 |
骨接合术外科植入物.第5部分:骨螺钉和辅助装置.第5节:丝锥和钻头规范 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for taps and drills |
BS 3531-5.6-1991 |
外科植入物.带有不对称螺纹和球形下表面的金属接骨螺钉.机械要求和试验方法 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for the mechanical requirements and test methods for screws having asymmetrical thread and spherical undersurface |
BS 3531-5.7-1991 |
整形外科钻孔设备.第1部分:钻刃,丝锥和沉头铣刀 |
Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for drill bits, taps and countersink cutters |
BS 3531-6.1-1990 |
骨接合术用外科植入物.第6部分:骨骼用钉和金属丝.第1节:一般要求规范 |
(Implants for osteosynthesis - Skeletal pins and wires - Specification for general requirements) |
BS 3531-6.2-1991 |
外科植入物.骨骼销钉和骨架金属丝.第2部分:斯台因曼骨骼销钉.尺寸 |
Implants for osteosynthesis - Skeletal pins and wires - Specification for dimensions of Steinmann skeletal pins |
BS 3531-6.3-1994 |
接骨用植入物.骨架销钉和骨架金属丝.Kirschner骨架金属丝 |
Implants for osteosynthesis - Skeletal pins and wires - Specification for Kirschner skeletal wires |
BS 3532-1990 |
绝缘不饱和聚酯树脂系规范的拟定 |
Method of specifying unsaturated polyester resin systems |
BS 3533-1981 |
隔热术语词汇 |
Glossary of thermal insulation terms |
BS 3537-1979 |
直径200mm及其以下活塞销规范 |
Specification for gudgeon pins up to 200 mm diameter |
BS 3539-1986 |
机动车噪音测量用声级计规范 |
Specification for sound level meters for the measurement of noise emitted by motor vehicles |
BS 354-1995 |
积分光度计推荐标准 |
Recommendations for photometric integrators |
BS 3544-1962 |
木材用聚乙酸乙烯酯粘剂试验方法 |
(Methods of test for polyvinyl acetate adhesives for wood) |
BS 3546-2001 |
生产防水渗透的布料用涂层织物 |
Coated fabrics for use in the manufacture of water penetration resistant clothing |
BS 3547-1962 |
电热食品输送机及运载工具规范 |
(Specification for electrically-heated food conveyors and carriers) |
BS 3550-1963 |
渐开线花键规范 |
(Specification for involute splines) |
BS 3551-1962 |
合金钢锁(卸)扣规范 |
(Specification for alloy steel shackles) |
BS 3552-1994 |
选煤术语词汇 |
(Glossary of coal preparation terms) |
BS 3553-1992 |
选煤厂流程图的图形符号规范 |
(Specification for graphical symbols for coal preparation plant flowsheets) |
BS 3555-1988 |
环形扳手规范 |
(Specification for ring wrenches) |
BS 3558-1-1997 |
橡胶术语的词汇.国际术语 |
(Glossary of rubber terms - International terms) |
BS 3558-2-2001 |
橡胶术语词汇.添加的英语术语 |
(Glossary of rubber terms - Additional British terms) |
BS 3564-1986 |
白云母块、片及薄膜按尺寸分级的方法 |
(Method for size-grading of muscovite mica blocks, thins and films) |
BS 3566-1982 |
防火设施用轻便救护罩单规范 |
(Specification for lightweight salvage sheets for fire service use) |
BS 3567-1985 |
选煤厂设计流程图绘制实用规程 |
(Code of practice for preparation of flowsheets for the design of coal preparation plant) |
BS 3568-1988 |
羊毛的碱溶解度测定方法 |
(Method for determination of solubility of wool in alkali) |
BS 357-1958 |
动力驱动的动臂式起重机(有轨低架型)规范 |
(Specification for power-driven travelling jib cranes (rail-mounted low carriage type)) |
BS 3572-1986 |
混凝土及砌砖工程中的烟囱及其它高建筑物用攀登配件规范 |
(Specification for access fittings for chimneys and other high structures in concrete or brick work) |
BS 3573-1990 |
聚乙烯烃绝缘铜芯通信电缆 |
(Specification for polyolefin copper-conductor telecommunication cables) |
BS 3575-1963 |
摩擦衬垫固定用铆钉规范 |
(Specification for rivets for the attachment of friction linings) |
BS 3580-1964 |
螺纹强度设计思想指南 |
(Guide to design considerations on the strength of screw threads) |
BS 3584-1990 |
羊毛在尿素亚硫酸氢盐溶液中溶解度的测定 |
(Determination of solubility of wool in urea-bisulphite solution) |
BS 3591-1985 |
工业用甲基醇规范 |
(Specification for industrial methylated spirits) |
BS 3592-1-1986 |
软管增强用钢丝.第1部分:橡胶软管增强用圆和扁的镀层钢丝规范 |
(Steel wire for hose reinforcement - Specification for coated round and flat steel wire for rubber hose reinforcement) |
BS 3592-2-1992 |
软管增强用钢丝.第2部分:液压管绑接增强用金属镀层钢丝规范 |
(Steel wire for hose reinforcement - Specification for metallic coated steel wire for the bonded reinforcement of hydraulic hoses) |
BS 3594-1-1963 |
管子扳手规范.第1部分:斯提尔逊型活动扳手 |
(Specification for pipe wrenches - Stillson type wrenches) |
BS 3594-2-1965 |
管子扳手规范.第2部分:轨迹型扳手 |
(Specification for pipe wrenches - Footprint type wrenches) |
BS 3597-1984 |
65/35锡/镍合金电镀层规范 |
(Specification for electroplated coatings of 65/35 tin/nickel alloy) |
BS 3598-1998 |
裂变材料.运输和加工的临界安全.推荐标准 |
(Fissile materials - Criticality safety in handling and processing - Recommendations) |
BS 3604-2-1991 |
承压钢管.具有规定高温特性的铁合金钢.第2部分:纵向电弧焊接管规范 |
(Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes) |
BS 3605-1-1991 |
承压无缝的和焊接的奥氏体钢管.第1部分:无缝管规范 |
(Austenitic stainless steel pipes and tubes for pressure purposes - Specification for seamless tubes) |
BS 3605-2-1992 |
无缝奥氏体承压钢管.纵向焊接管规范 |
(Austenitic stainless steel pipes and tubes for pressure purposes - Specification for longitudinally welded tubes) |
BS 3618-1-1969 |
采掘术语词汇.第1节:计划和测量 |
(Glossary of mining terms - Planning and surveying) |
BS 3618-10-1967 |
采掘术语词汇.运输 |
(Glossary of mining terms - Transport) |
BS 3618-11-1967 |
采掘术语词汇.第11节:地层控制 |
(Glossary of mining terms - Strata control) |
BS 3618-2-1971 |
采掘术语词汇.第2节:通风 |
(Glossary of mining terms - Ventilation) |
BS 3618-3-1971 |
采掘术语词汇.第3节:钻孔和探测 |
(Glossary of mining terms - Boring and exploration) |
BS 3618-4-1971 |
采掘术语词汇.第4节:排水 |
(Glossary of mining terms - Drainage) |
BS 3618-5-1971 |
采掘术语词汇.第5节:地质学 |
(Glossary of mining terms - Geology) |
BS 3618-6-1972 |
采掘术语词汇.第6节:钻探和爆破 |
(Glossary of mining terms - Drilling and blasting) |
BS 3618-7-1973 |
采掘术语词汇.第7节:电气工程和照明 |
(Glossary of mining terms - Electrical engineering and lighting) |
BS 3618-8-1974 |
采掘术语词汇.第8节:采掘和操作 |
(Glossary of mining terms - Winning and working) |
BS 3618-9-1974 |
采掘术语词汇.第9节:竖井和辅助设备 |
(Glossary of mining terms - Shafts and associated equipment) |
BS 3619-1976 |
活动灌输架规范 |
(Specification - Mobile infusion stands) |
BS 3621-1998 |
防盗锁规范 |
(Specification for thief resistant locks) |
BS 3621-2004 |
防盗锁组件.钥匙孔 |
|
BS 3622-1975 |
医院一般用途凳子和麻醉师用椅子规范 |
(Specification for general purpose stools and anaesthetists’ chairs for hospital use) |
BS 3623-1981 |
木工用金属车身刨规范 |
(Specification for woodworkers’ metal-bodied planes) |
BS 3625-1963 |
粉末粒度测定用目镜和网格分度镜规范 |
(Specification for eyepiece and screen graticules for the determination of the particle size of powders) |
BS 3628-1963 |
一般用软管夹子(蜗杆传动式)规范 |
(Specification for hose clips (worm drive type) for general purpose use) |
BS 3630-16-1976 |
锌和锌合金的取样与分析方法.第16部分:锌合金中的镍(光度测量法) |
(Methods for the sampling and analysis of zinc and zinc alloys - Nickel in zinc alloys (photometric method)) |
BS 3632-1995 |
住宅停车房规范 |
(Specification for residential park homes) |
BS 3641 Supplement-1980 |
机床用补充符号(和标志)的应用指南 |
(Guide to application of additional symbols (and index) for machine tools) |
BS 3641-1-1971 |
机床符号.第1部分:一般符号 |
(Symbols for machine tools - General symbols) |
BS 3641-2-1980 |
机床符号.数控符号规范 |
(Symbols for machine tools - Specification for numerical control symbols) |
BS 3641-3-1973 |
机床符号.第3部分:增加的一般符号 |
(Specification for symbols for machine tools - Additional general symbols) |