标准号 |
中文名称 |
英文名称 |
| BS EN ISO 10075-1-2000 |
有关脑力工作负荷的人类工效学原理.一般术语和定义 |
(Ergonomic principles related to mental workload - General terms and definitions (ISO 10075:1991)) |
| BS EN ISO 10075-2-2000 |
有关脑力劳动负荷的人类工效学原理.设计原理 |
(Ergonomic principles related to mental workload - Design principles) |
| BS EN ISO 10075-3-2004 |
与心理负荷相关的人类工效学原理.心理负荷测量和评估方法的准则和要求 |
|
| BS EN ISO 10075-3-2004 |
与心理负荷相关的人类工效学原理.心理负荷测量和评估方法的准则和要求 |
|
| BS EN ISO 10077-1-2000 |
门窗和遮板的热性能.热传递系数的计算.简化法 |
(Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Simplified method) |
| BS EN ISO 10077-2-2003 |
门、窗和百叶窗的热性能.热传递系数的计算.框架的数值法 |
(Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Numerical method for frames) |
| BS EN ISO 10079-1-2000 |
医用吸引设备.电驱动吸引设备.安全要求 |
(Medical suction equipment - Electrically powered suction equipment - Safety requirements) |
| BS EN ISO 10079-2-2000 |
医疗吸引设备.手动吸引设备 |
(Medical suction equipment - Manually powered suction equipment) |
| BS EN ISO 10079-3-2000 |
医疗吸引设备.真空或压力吸引设备 |
(Medical suction equipment - Suction equipment powered from a vacuum or pressure source) |
| BS EN ISO 10082-2000 |
塑料.酚醛树脂.分类和试验方法 |
(Plastics - Phenolic resins - Classification and test methods) |
| BS EN ISO 10087-1996 |
小型船舶.船体鉴定.编码体系 |
(Small craft - Hull identification - Coding system) |
| BS EN ISO 10088-2001 |
小型船舶.固定安装的燃料系统和固定的燃料箱 |
(Small craft - Permanently installed fuel systems and fixed fuel tanks) |
| BS EN ISO 10093-1999 |
塑料.燃烧试验.标准火源 |
(Plastics - Fire tests - Standard ignition sources) |
| BS EN ISO 10101-1-1994 |
天然气.卡尔费瑟法测定水含量.说明 |
(Natural gas - Determination of water by the Karl Fischer method - Introduction) |
| BS EN ISO 10101-2-1994 |
天然气.卡尔费瑟法测定水含量.滴定程序 |
(Natural gas - Determination of water by the Karl Fischer method - Titration procedure) |
| BS EN ISO 10101-3-1994 |
天然气.卡尔费瑟法测定水含量.库仑分析程序 |
(Natural gas - Determination of water by the Karl Fischer method - Coulometric procedure) |
| BS EN ISO 10111-2002 |
金属和其它无机覆层.单位面积质量的测量.重量法和化学分析方法概述 |
(Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods) |
| BS EN ISO 10133-2001 |
小型飞机.电力系统.超低电压直流电力设备 |
(Small craft - Electrical systems - Extra-low-voltage d.c. installations) |
| BS EN ISO 10139-2-2001 |
牙科学.可摘义齿用柔软线性材料.长时间使用的材料 |
(Dentistry - Soft lining materials for removable dentures - Materials for long-term use) |
| BS EN ISO 10209-2-1996 |
技术产品文献加工.词汇.第2部分:有关投射方法的术语 |
(Technical product documentation - Vocabulary - Terms relating to projection methods) |
| BS EN ISO 10211-1-1996 |
高层建筑中的热桥.热流和表面温度.第1部分:一般计算方法 |
(Thermal bridges in building construction - Heat flows and surface temperatures - General calculation methods) |
| BS EN ISO 10211-2-2001 |
建筑结构中的热桥.热流和表面温度.线性热桥 |
(Thermal bridges in building construction - Heat flows and surface temperatures - Linear thermal bridges) |
| BS EN ISO 10239-2000 |
小艇.液化石油气(LPG)系统 |
(Small craft - Liquified petroleum gas (LPG) systems) |
| BS EN ISO 10240-1996 |
小型飞机.机长手册 |
(Small craft - Owner’s manual) |
| BS EN ISO 10240-2004 |
小艇.艇主手册 |
|
| BS EN ISO 10253-1998 |
水质.用有中脉的骨条藻属和有三突的褐指藻属进行的海底藻类生长限制试验 |
(Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum) |
| BS EN ISO 10256-2003 |
冰球运动员用头部和面部的保护装置 |
(Head and face protection for use in ice hockey) |
| BS EN ISO 10271-2001 |
牙科金属材料.腐蚀试验方法 |
(Dental metallic materials - Corrosion test methods) |
| BS EN ISO 10273-2003 |
食品和动物饲料的微生物学.伪结肠耶尔森氏结肠杆菌病源检测的水平法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica) |
| BS EN ISO 10280-1991 |
钢和铁.钛含量测定.二安替比林基代甲烷分光光度法 |
(Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method) |
| BS EN ISO 10289-2001 |
在金属衬底上金属和其它无机覆层的腐蚀试验的方法.用于腐蚀试验的试验样品和生产产品的分级 |
(Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests) |
| BS EN ISO 10301-1997 |
水质.高活性卤化烃的测定.气相色谱法 |
(Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods) |
| BS EN ISO 10303-210-2002 |
工业自动化系统和集成.产品数据表示和信息交流.应用协议.电子组装、互连和包装设计 |
(Industrial automation systems and integration - Product data representation and exchange - Application protocol - Electronic assembly, interconnection, and packaging design) |
| BS EN ISO 10304-1-1995 |
水质.使用离子液相色谱法测量可溶解氟化物、氯化物、亚硝酸盐、正磷酸盐、溴化物、硝酸盐和硫酸离子.低污染 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Determination of fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions - Method for water) |
| BS EN ISO 10304-2-1997 |
水的质量.用液态离子色谱法测定已溶解的阴离子.第2部分:在废水中溴化物、氟化物、硝酸盐、亚硝酸盐、亚磷酸 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water) |
| BS EN ISO 10304-3-1997 |
水质.用液态离子色谱法测定已溶解的阴离子.第3部分:铬酸盐、碘化物、亚硫酸盐、硫氰酸盐和硫代硫酸酯的测定 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate) |
| BS EN ISO 10304-4-2000 |
水质.液态离子色谱法对非溶解阴离子的测定.低污染水中溶解氯酸盐、氯化物和亚氯酸盐的测定 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Determination of dissolved chlorate, chloride and chlorite in water with low contamination) |
| BS EN ISO 10306-1995 |
纺织品.棉纤维成熟度的空气流动法评定 |
(Textiles - Cotton fibres - Evaluation of maturity by the air flow method) |
| BS EN ISO 10308-1997 |
金属覆层.孔隙率检验复审 |
(Metallic coatings - Review of porosity tests) |
| BS EN ISO 10318-2005 |
土工合成织物.术语和定义 |
|
| BS EN ISO 10319-1996 |
土工织物.大宽度拉伸试验 |
Geotextiles - Wide-width tensile test |
| BS EN ISO 10320-1999 |
土工织物和土工织物相关产品.现场识别 |
Geotextiles and geotextile-related products - Identification on site |
| BS EN ISO 10321-1996 |
土工织物.用大宽度法测定接头/接缝处的拉伸试验 |
(Geotextiles - Tensile test for joints/seams by wide-width method) |
| BS EN ISO 10322-1-1996 |
眼科光学.半成品眼镜坯.单光透镜毛坯和多焦透镜坯规范 |
(Ophthalmic optics - Semi-finished spectacle lens blanks - Specifications for single-vision and multifocal lens blanks) |
| BS EN ISO 10322-2-1996 |
眼科光学.半成品眼镜镜坯.渐变眼镜毛坯规范 |
(Ophthalmic optics - Semi-finished spectacle lens blanks - Specifications for progressive power lens blanks) |
| BS EN ISO 10323-1996 |
牙科用旋转器械.盘片和轮的内径 |
(Dental rotary instruments - Bore diameters for discs and wheels) |
| BS EN ISO 10338-1998 |
光学和光学仪器.接触镜片.曲率测定 |
(Optics and optical instruments - Contact lenses - Determination of curvature) |
| BS EN ISO 10340-1997 |
光学和光学仪器.接触镜片.溶剂可萃取物质的测定方法 |
(Optics and optical instruments - Contact lenses - Method for determination of solvent extractable substances) |
| BS EN ISO 10342-2003 |
眼科仪器.眼睛折射计 |
(Ophthalmic instruments - Eye refractometers) |
| BS EN ISO 10344-1998 |
光学及光学仪器.接触镜片.接触镜片试验用含盐溶液 |
(Optics and optical instruments - Contact lenses - Saline solution for contact lens testing) |
| BS EN ISO 10350-1-2001 |
塑料.可比单点数据的采集和表示法.模塑材料 |
(Plastics - Acquisition and presentation of comparable single-point data - Moulding materials) |
| BS EN ISO 10350-2-2001 |
塑料.可比单点数据的采集和表示法.第2部分:长纤维增强塑料 |
(Plastics - Acquisition and presentation of comparable single-point data - Long-fibre-reinforced plastic) |
| BS EN ISO 10352-1997 |
纤维增强塑料.模制化合物和聚酯胶片.单位面积质量的测定 |
(Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area) |
| BS EN ISO 10360-1-2001 |
几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定.词汇 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Vocabulary) |
| BS EN ISO 10360-2-2002 |
产品几何量技术规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.测量尺寸用坐标式测量设备 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used for measuring size) |
| BS EN ISO 10360-3-2001 |
几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定.旋转台的轴线作为第四条轴线的坐标式测量仪器 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs with the axis of the rotary table as the fourth axis) |
| BS EN ISO 10360-4-2001 |
几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定.用于扫描测量模式的坐标式测量仪器 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used in scanning measuring mode) |
| BS EN ISO 10360-5-2001 |
几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定.带多针尖探测系统的坐标式测量设备 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs using multiple stylus probing systems) |
| BS EN ISO 10360-6-2002 |
产品几何量技术规范(GPS).坐标测量机(CMM)的验收和复检试验.计算高斯相关特性误差的估计 |
(Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Estimation of errors in computing Gaussian associated features) |
| BS EN ISO 10363-1995 |
热熔粘胶剂.热稳定性测定 |
Hot-melt adhesives - Determination of thermal stability |
| BS EN ISO 10365-1995 |
粘合剂.主要失效型式的名称与符号 |
(Adhesives - Designation of main failure patterns) |
| BS EN ISO 10366-1-2002 |
塑料.甲基丙烯酸甲酯/丁二烯/苯乙烯共聚物(ABS)的模塑和压塑材料.名称和符号系统和规范基础 |
(Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Designation system and basis for specifications) |
| BS EN ISO 10366-2-2004 |
塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯模塑和挤塑材料.试样制备和性能测定 |
|
| BS EN ISO 10366-2-2004 |
塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯模塑和挤塑材料.试样制备和性能测定 |
|
| BS EN ISO 10370-1996 |
石油产品.碳渣的测定.微米法 |
Petroleum products - Determination of carbon residue - Micro method |
| BS EN ISO 10374-1995 |
货运集装箱.自动识别符 |
Freight containers - Automatic identification |
| BS EN ISO 10380-2003 |
管道系统.波纹状金属软管和软管组件 |
(Pipework - Corrugated metal hoses and hose assemblies) |
| BS EN ISO 10417-2004 |
石油和天然气工业.井下安全阀系统.设计、安装、操作和矫正 |
|
| BS EN ISO 10418-2003 |
石油和天然气工业.近海生产装置.基础表面操作安全系统 |
(Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems) |
| BS EN ISO 10423-2001 |
石油和天然气工业.钻井和开采设备.井口设施和采油树设备 |
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment |
| BS EN ISO 10423-2004 |
石油和天然气工业.钻井和开采设备.井口设施和采油树设备(CD-ROM) |
|
| BS EN ISO 10423-2004 |
石油和天然气工业.钻井和开采设备.井口设施和采油树设备 |
|
| BS EN ISO 10424-1-2004 |
石油和天然气工业.旋转钻探设备.旋转钻杆构件 |
|
| BS EN ISO 10426-1-2000 |
石油和天然气工业.固井用水泥和材料.规范 |
Petroleum and natural gas industries - Cements and materials for well cementing - Specification |
| BS EN ISO 10426-2-2004 |
石油和天然气工业.油井固井用水泥和材料.油井用水泥的试验 |
|
| BS EN ISO 10426-2-2004 |
石油和天然气工业.油井固井用水泥和材料.油井用水泥的试验 |
|
| BS EN ISO 10426-4-2005 |
石油和天然气工业.油井固井用水泥和材料.在大气压力下泡沫水泥浆的制备和试验 |
|
| BS EN ISO 10427-1-2002 |
石油和天然气工业.套管扶正器.弓形弹簧套管扶正器 |
(Petroleum and natural gas industries - Casing centralizers - Bow-spring casing centralizers) |
| BS EN ISO 10427-2-2004 |
石油和天然气工业.套管扶正器.扶正器的放置和限动环的检测 |
|
| BS EN ISO 10427-2-2004 |
石油和天然气工业.良好胶结设备.扶正器的放置和限动环的检测 |
|
| BS EN ISO 10427-2-2004 |
石油和天然气工业.良好胶结设备.扶正器的放置和限动环的检测 |
|
| BS EN ISO 10427-3-2004 |
石油和天然气工业.固井用设备.浮动式固井设备的性能试验 |
|
| BS EN ISO 1043-1-2002 |
塑料.符号和缩略语.基本聚合物及其特性 |
(Plastics - Symbols and abbreviated terms - Basic polymers and their special characteristics) |
| BS EN ISO 1043-3-1999 |
塑料.符号和缩略语.增塑剂 |
(Plastics - Symbols and abbreviated terms - Plasticizers) |
| BS EN ISO 1043-4-1999 |
塑料.符号和缩略语.阻燃剂 |
Plastics - Symbols and abbreviated terms - Flame retardants |
| BS EN ISO 10432-2000 |
石油和天燃气工业.下井设备.地下安全阀设备 |
(Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment) |
| BS EN ISO 10434-2004 |
石油、石化和相关工业用螺栓帽状钢闸阀 |
|
| BS EN ISO 10437-2003 |
石油、石油化学和天然气工业.专用汽轮机设备 |
(Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications) |
| BS EN ISO 10438-4-2004 |
石油、石化和天然气工业.润滑、油封、控油系统和辅助装置.自动气封支撑系统 |
|
| BS EN ISO 10438-4-2004 |
石油、石化和天然气工业.润滑、油封、控油系统和辅助装置.自动气封支撑系统 |
|
| BS EN ISO 10439-2002 |
石油、化学和气体工业.离心压缩机 |
(Petroleum, chemical and gas service industries - Centrifugal compressors) |
| BS EN ISO 10440-1-2001 |
石油和天然气工业.转式容积式压缩机.过程压缩机(无油) |
(Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Process compressors (oil-free)) |
| BS EN ISO 10440-2-2002 |
石油和天然气工业.旋转型容积式压缩机.封装的空气压缩机(无油) |
(Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Packaged air compressors (oil-free)) |
| BS EN ISO 10441-1999 |
石油和天然气工业.机械动力传输用挠性联轴器.专用设施 |
(Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - Special purpose applications) |
| BS EN ISO 10442-2003 |
石油、化学和气体工业.组合式一体传动离心空气压缩机 |
(Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors) |
| BS EN ISO 10451-2002 |
牙科植入系统.技术文件内容 |
(Dental implant systems - Contents of technical file) |
| BS EN ISO 10456-2000 |
建筑材料和制品.热值的设计和申报测定的程序 |
Building materials and products - Procedures for determining declared and design thermal values |
| BS EN ISO 10472-1-1998 |
工业洗涤机械的安全要求.第1部分:常规要求 |
Safety requirements for industrial laundry machinery - Common requirements |
| BS EN ISO 10472-2-1998 |
工业洗衣机的安全要求.第2部分:洗衣机和洗衣脱水机 |
(Safety requirements for industrial laundry machinery - Washing machines and washer-extractors) |
| BS EN ISO 10472-3-1998 |
工业洗涤机械的安全要求.第5部分:包括组件机械的洗衣槽线 |
Safety requirements for industrial laundry machinery - Washing tunnel lines including component machines |
| BS EN ISO 10472-4-1998 |
工业洗涤机械的安全要求.第4部分:空气干燥器 |
Safety requirements for industrial laundry machinery - Air dryers |
| BS EN ISO 10472-5-1998 |
工业洗涤机械的安全要求.第5部分:平板熨衣机,进料机和折叠机 |
Safety requirements for industrial laundry machinery - Flatwork ironers, feeders and folders |
| BS EN ISO 10472-6-1998 |
工业洗涤机械的安全要求.第6部分:熨压及熔压 |
Safety requirements for industrial laundry machinery - Ironing and fusing presses |
| BS EN ISO 10477-2004 |
牙科学.高聚物基的牙冠和齿桥材料 |
|
| BS EN ISO 10485-2004 |
螺母锥形保证载荷试验 |
|
| BS EN ISO 10497-2004 |
阀门试验.耐火试验要求 |
|
| BS EN ISO 10497-2004 |
阀门试验.耐火试验要求 |
|
| BS EN ISO 105-A01-1996 |
纺织品.染色牢度试验.试验一般原理 |
(Textiles - Tests for colour fastness - General principles of testing) |
| BS EN ISO 105-A04-1999 |
纺织品.色牢度试验.贴衬织物着色度的仪器评定法 |
(Textiles - Tests for colour fastness - Method for the instrumental assessment of the degree of staining of adjacent fabrics) |
| BS EN ISO 105-A05-1997 |
纺织品.染色牢度试验.第B05部分:色泽变化分级率的测定和仪器评定 |
(Textiles - Tests for colour fastness - Instrumental assessment of change of colour for determination of grey scale rating) |
| BS EN ISO 105-A06-1997 |
纺织品.染色牢度试验.第A06部分:颜色的1/1标准深度的仪器测定 |
(Textiles - Tests for colour fastness - Instrumental determination of 1/1 standard depth of colour) |
| BS EN ISO 105-B01-1999 |
纺织品.色牢度试验.耐光色牢度:日光 |
(Textiles - Tests for colour fastness - Colour fastness to light: Daylight) |
| BS EN ISO 105-B02-1999 |
纺织品.色牢度试验.耐人工光色牢度:氙弧耐晒牢度试验用灯的试验 |
(Textiles - Tests for colour fastness - Colour fastness to artificial light: Xenon arc fading lamp test) |
| BS EN ISO 105-B03-1997 |
纺织品.颜色牢度试验.第B03部分:耐气候影响的色牢度:室外暴露 |
(Textiles - Tests for colour fastness - Colour fastness to weathering - Outdoor exposure) |
| BS EN ISO 105-B04-1997 |
纺织品.颜色牢度试验.第B04部分:耐气候影响的色牢度:氙弧灯 |
(Textiles - Tests for colour fastness - Colour fastness to artificial weathering - Xenon arc fading lamp test) |
| BS EN ISO 105-B05-1996 |
纺织品.染色牢度试验.第B05部分:光致变色的检测和评定 |
(Textiles - Tests for colour fastness - Detection and assessment of photochromism) |
| BS EN ISO 105-B08-1999 |
纺织品.染色牢度试验.优级有光泽羊毛参考材料1至7号的质量控制 |
(Textiles - Tests for colour fastness - Quality control of blue wool reference materials 1 to 7) |
| BS EN ISO 105-C06-1997 |
纺织品.色牢度试验.第C06部分:耐家庭和商业洗涤的色牢度 |
(Textiles - Tests for colour fastness - Colour fastness to domestic and commercial laundering) |
| BS EN ISO 105-C07-2001 |
纺织品.色牢度试验.印染纺织品耐湿擦洗的色牢度 |
(Textiles - Tests for colour fastness - Colour fastness to wet scrubbing of pigment dyed or pigment printed textiles) |
| BS EN ISO 105-C08-2001 |
纺织品.色牢度试验.用含有低温漂白活化剂的非磷酸标准染色剂测定耐家庭和商业洗涤的色牢度 |
(Textiles - Tests for colour fastness - Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com