标准号 |
中文名称 |
英文名称 |
| BS EN 313-2-2000 |
胶合板.分类和术语.术语 |
(Plywood - Classification and terminology - Terminology) |
| BS EN 3135-1999 |
耐蚀钢FE-PA11制钝化带通用头的全铆钉.英制系列 |
(Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series) |
| BS EN 3136-1996 |
FE-PA92HT号耐蚀钢钝化带通用头的全铆钉.英制系列 |
(Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series) |
| BS EN 3138-2001 |
航空航天系列.铆钉,固体100摄氏度常规头耐腐蚀钢FE-PA2601钝化的英制系列 |
(Aerospace series - Rivets, solid 100 ?countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series) |
| BS EN 3139-2001 |
航空航天系列.英制系列、钝化、耐腐蚀钢FE-PA11制100°标准埋头实心铆钉 |
(Aerospace series - Rivets, solid, 100 ?countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series) |
| BS EN 314-1-1993 |
胶合板.粘结质量.试验方法 |
(Plywood - Bonding quality - Test methods) |
| BS EN 314-2-1993 |
胶合板.胶合质量.要求 |
(Plywood - Bonding quality - Requirements) |
| BS EN 3140-2001 |
航空航天系列.铆钉,固体100摄氏度埋头耐腐蚀钢FE-PA2601钝化的英制系列 |
(Aerospace series - Rivets, solid, 100 ?countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series) |
| BS EN 3141-1996 |
耐高温镍基合金钢NI-P11制镀镉带通用头的全铆钉.英制系列 |
(Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series) |
| BS EN 3142-1996 |
耐高温镍基合金钢NI-P11制带通用头的全铆钉.英制系列 |
(Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series) |
| BS EN 31427-1994 |
银珠宝合金中银含量的测定.溴化钾容量(电位)法 |
(Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide) |
| BS EN 3145-2002 |
热轧圆钢棒.标准公差.直径6mm |
(Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm) |
| BS EN 3146-2001 |
航空航天系列.热轧钢制圆形棒材.紧公差.直径6mm 250mm.尺寸 |
(Aerospace series - Round bars, hot rolled in steel - Close tolerances - Diameter 6mm) |
| BS EN 3149-1997 |
60度模锻带安装孔的凸缘柄螺母.设计标准 |
(Shank nuts - Installation holes, 60 ?swage, flanges - Design standard) |
| BS EN 315-2000 |
胶合板.尺寸公差 |
(Plywood - Tolerances for dimensions) |
| BS EN 3150-1995 |
耐热镍基NI-P100HT型合金制肩部无头轴销 |
(Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718)) |
| BS EN 3151-1995 |
耐热镍基合金NI-P100HI(因康718)制无槽圆柱销 |
(Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718)) |
| BS EN 3152-2005 |
航空航天系列.自锁紧、MJ螺纹、FE-PA2601(A286)耐热钢制镀银或不镀银螺母.分类:1100MPa (环境温度下)/425 鳦.技术规范 |
|
| BS EN 316-1999 |
木纤维板.定义、分类和符号 |
(Wood fibreboards - Definition, classification and symbols) |
| BS EN 317-1993 |
碎料板和纤维板.在水中浸泡后膨胀厚度的测定 |
(Particleboards and fibreboards - Determination of swelling in thickness after immersion in water) |
| BS EN 318-2002 |
木质板材.与相对湿度变化有关的尺寸变化的测定 |
(Wood based panels - Determination of dimensional changes associated with changes in relative humidity) |
| BS EN 319-1993 |
碎料板和纤维板.与板平面垂直的拉伸强度的测定 |
(Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board) |
| BS EN 3196-1994 |
镀银FE-PA92HT(A286)耐热钢制自锁六角头螺母.等级:1100 MPa(室温)/425℃ |
(Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 32-1999 |
挂墙式洗脸盆.连接尺寸 |
(Wall-hung wash basins - Connecting dimensions) |
| BS EN 320-1993 |
纤维板.抗螺钉轴向拔出力的测定 |
(Fibreboards - Determination of resistance to axial withdrawal of screws) |
| BS EN 3202-1995 |
T形头螺钉的孔和接触面.设计标准 |
(Holes and traps for T-head bolts - Design standard) |
| BS EN 3207-1998 |
橡胶化合物.技术规范 |
(Rubber compounds - Technical specification) |
| BS EN 321-2002 |
木质板材.循环试验条件下抗湿性的测定 |
(Wood-based panels - Determination of moisture resistance under cyclic test conditions) |
| BS EN 3212-1995 |
涂料.在阻尼氯化纳溶剂中用更换浸渍试验测定耐蚀性 |
(Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution) |
| BS EN 322-1993 |
木基镶板.潮气含量测定 |
(Wood-based panels - Determination of moisture content) |
| BS EN 323-1993 |
木基镶板.密度测定 |
(Wood-based panels - Determination of density) |
| BS EN 3230-2001 |
航空航天系列.钢制、镀镉、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/235℃ |
(Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classificaiton: 900 MPa (at ambient temperature)/235 鳦) |
| BS EN 3236-1998 |
薄壁、自锁紧、镀银耐热镍基合金NI-P100HT(铬镍铁合金718)、短内螺纹嵌镶件 |
(Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread) |
| BS EN 3237-1998 |
薄壁、自锁紧、镀银耐热镍基合金NI-P100HT(铬镍铁合金718)、长内螺纹嵌镶件 |
(Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread) |
| BS EN 3239-1996 |
镀银螺纹齿的HI-P101HT耐热镍基合金(沃斯帕洛尹合金)制自锁双六角头螺母.等级:1210 MPa(室温)/730℃ |
(Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/730 ℃) |
| BS EN 324-1-1993 |
木质板材.板尺寸测定.厚度、宽度和长度测定 |
(Wood-based panels - Determination of dimensions of boards - Determination of thickness, width and length) |
| BS EN 324-2-1993 |
木基镶板.板尺寸测定.垂直度和边缘平直度测定 |
(Wood-based panels - Determination of dimensions of boards - Determination of squareness and edge straightness) |
| BS EN 3243-2001 |
航空航天系列.钛合金管连接件8°30’.修理用带动梁密封端头的焊接箍 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Ferrule, welded, with dynamic beam seal end) |
| BS EN 3244-2001 |
航空航天系列.钛合金管连接件8°30’.双端头活接头 |
(Aerospace Series - Pipe coupling 8°30’ in titanium alloy - Unions, double ended) |
| BS EN 3245-2001 |
航空航天系列.钛合金8°30’管连接件.活接头、减压器 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, reducer) |
| BS EN 3246-2001 |
航空航天系列.钛合金8°30’ 管连接件.活接头、闷头 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, bulkhead) |
| BS EN 3247-2001 |
航空航天系列.钛合金8°30’管连接件.活接头、闷头焊接端 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Unions, bulkhead welded end) |
| BS EN 3248-2001 |
航空航天系列.钛合金管连接件8°30’.带锁紧的缩径管端头接头 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Adaptors, reduced pipe end, with lockring) |
| BS EN 325-1993 |
木基镶板.试件尺寸测定 |
(Wood-based panels - Determination of dimensions of test pieces) |
| BS EN 326-1-1994 |
木基镶板.抽样、剪切和检验.试样的抽取和剪切及试验结果的表述 |
(Wood-based panels - Sampling, cutting and inspection - Sampling and cutting of test pieces and expression of test results) |
| BS EN 326-2-2000 |
木质板材.抽样、切削和检验.工厂中的质量控制 |
(Wood-based panels - Sampling, cutting and inspection - Quality control in the factory) |
| BS EN 326-3-1998 |
木基镶板.抽样、剪切和检验.板凭证的检验 |
(Wood-based panels - Sampling, cutting and inspection - Inspection of a consignment of panels) |
| BS EN 326-3-2004 |
木基镶板.抽样、切割和检验.隔绝板的检查 |
|
| BS EN 3264-2001 |
航空航天系列.钛合金管连接件8°30’.止推金属丝螺母 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Thrust wire nut) |
| BS EN 3266-2001 |
航空航天系列.钛合金管连接件.闷头螺母 |
(Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut) |
| BS EN 3267-2001 |
航空航天系列.钛合金闷头垫圈 |
(Aerospace series - Washers, bulkhead in titanium alloy) |
| BS EN 3268-2001 |
航空航天系列.钛合金管连接件8°30’.压力管塞 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Pressure plug) |
| BS EN 3269-2001 |
航空航天系列.钛合金管连接件8°30’.带动梁密封端头的暗箍 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Ferrules, blind, with dynamic beam seal end) |
| BS EN 327-2000 |
热交换器.强制对流空气冷却制冷剂冷凝器.确定性能的试验方法 |
(Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedure for establishing performance) |
| BS EN 3270-2001 |
航空航天系列.8°30’钛合金管连接件.带锁紧环的截止管塞 |
(Aerospace series - Pipe coupling 8°30’ in titanium alloy - Blanking plug with lockring) |
| BS EN 3272-2001 |
航空航天系列.8°30’钛合金管连接件.带动梁密封端头的焊接箍.几何配置 |
(Aerospace series - Pipe coupling 8°30’ - Dynamic beam seal end for ferrule, welded - Geometric configuration) |
| BS EN 3273-2001 |
航空航天系列.钛合金管连接件8°30’.弯头、十字管和三通管用动梁密封端头.几何配置 |
(Aerospace series - Pipe coupling 8°30’ - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration) |
| BS EN 3274-2001 |
航空航天系列.管连接件8°30’.螺纹.几何配置 |
(Aerospace series - Pipe coupling 8°30’ - Thread - Geometric configurations) |
| BS EN 3275-2002 |
航空航天系列.管连接 8°30’高达28000kPa.移动光束密封.米制系列.技术规范 |
(Aerospace series - Pipe coupling 8°30’ up to 28000 kPa - Dynamic beam seal - Metric series - Technical specification) |
| BS EN 328-1999 |
热交换器.建立用制冷剂的通风装置空气制冷机性能的试验程序 |
(Heat exchangers - Test procedures for establishing the performance of forced convection unit air coolers for refrigeration) |
| BS EN 3280-1994 |
飞机机架用滚动、刚性或自位式轴承.技术规范 |
(Bearings, airframe rolling, rigid or self-aligning - Technical specification) |
| BS EN 3281-1994 |
飞机机架滚动轴承.钢制硬性单排滚珠轴承.直径系列8和9.尺寸和荷载 |
(Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9. Dimensions and loads) |
| BS EN 3282-1994 |
飞机机架滚动轴承.镀镉钢制硬性单排滚珠轴承.直径系列8和9.尺寸和荷载 |
(Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9. Dimensions and loads) |
| BS EN 3283-1994 |
飞机机架滚动轴承.耐腐蚀钢制硬性单排滚珠轴承.直径系列8和9.尺寸和荷载 |
(Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9. Dimensions and loads) |
| BS EN 3284-1994 |
飞机机架滚动轴承.钢制硬性单排滚珠轴承.直径系列0和2.正常间隙种类.尺寸和荷载 |
(Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2. Normal clearance category - Dimensions and loads) |
| BS EN 3285-1994 |
飞机机架滚动轴承.镀镉钢制硬性单排滚珠轴承.直径系列0和2.正常间隙种类.尺寸和荷载 |
(Bearings; airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2. Normal clearance category - Dimensions and loads) |
| BS EN 3286-1994 |
飞机用轴承.不锈钢制单列向心球轴承.直径系列0和2.尺寸和负载 |
(Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2. Normal clearance category - Dimensions and loads) |
| BS EN 3287-1994 |
飞机机架滚动轴承.双排自位式钢制滚珠轴承.直径系列2.尺寸和荷载 |
(Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2. Dimensions and loads) |
| BS EN 3288-1994 |
飞机机架滚动轴承.镀镉双排自位式钢制滚珠轴承.直径系列2.尺寸和荷载 |
(Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2. Dimensions and loads) |
| BS EN 3289-1994 |
飞机机架滚动轴承.耐腐蚀的双排自位式钢制滚珠轴承.直径系列2.尺寸和荷载 |
(Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2. Dimensions and loads) |
| BS EN 3290-1994 |
飞机用轴承.钢制单列球面轴承.直径系列3和4.尺寸和负载 |
(Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4. Dimensions and loads) |
| BS EN 3291-1994 |
飞机机架滚动轴承.镀镉单排自位式钢制滚动轴承.直径系列3和4.尺寸和荷载 |
(Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4. Dimensions and loads) |
| BS EN 3292-1994 |
飞机用轴承.不锈钢制单列球面轴承.直径系列3和4.尺寸和负载 |
(Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4. Dimensions and loads) |
| BS EN 3297-1998 |
薄壁、自锁紧、耐热镍基合金NI-P100HT(铬镍铁合金718)、MJ螺纹嵌镶件.技术规范 |
(Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification) |
| BS EN 3298-1998 |
薄壁、自锁紧嵌镶件.装配和拆卸程序 |
(Inserts, thin wall, self-locking - Installation and removal procedure) |
| BS EN 33-2003 |
带紧配冲洗水箱的台座式抽水马桶.连接尺寸 |
(Pedestal W.C. pans with close-coupled flushing cistern - Connecting dimensions) |
| BS EN 330-1993 |
木材防腐剂.测定涂层下和地面露出接触用木材防腐剂的相对防护效果的现场试验方法.L连接法 |
(Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out-of-ground contact - L-joint method) |
| BS EN 3303-1997 |
镀镉合金钢制中长螺纹粗公差标准柄六角凹帽罩头螺钉.等级:1100 MPa(室温)/235℃ |
(Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 鳦) |
| BS EN 3304-1997 |
MoS2润滑的阳极氧化钛合金制短螺纹紧公差标准柄翼型十字槽小于100°的埋头螺钉.等级:1100 MPa(室温)/315℃ |
(Screws, 100 ?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoSDOWN2 lubricated - Classification: 1100 MPa (at ambient tem) |
| BS EN 3305-1997 |
镀镉合金钢制短螺纹紧公差标准柄翼型十字槽小于100°的埋头螺钉.等级:1100 MPa(室温)/235℃ |
(Screws, 100 ?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 鳦) |
| BS EN 3306-1996 |
MoS2润滑的阳极氧化钛合金制头部加螺纹的翼型十字槽100°标准埋头螺钉.等级:1100 MPa(室温)/315℃ |
(Screws, 100 ?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoSDOWN2 lubricated - Classification - 1100 MPa (at ambient temperature)/315 鳦) |
| BS EN 3307-1997 |
MoS2润滑的阳极氧化钛合金制头部加螺纹的翼型十字槽大柱头螺钉.等级:1100 MPa(室温)/315℃ |
(Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoSDOWN2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 鳦) |
| BS EN 3308-1996 |
MoS2润滑的阳极氧化钛合金制头部加螺纹的标准六角头螺钉.等级:1100 MPa(室温)/315℃ |
(Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoSDOWN2 lubricated - Classification - 1100 MPa (at ambient temperature) /315 鳦) |
| BS EN 331-1998 |
建筑物燃气供应设备用人工操纵球阀和封底锥度旋塞阀 |
(Manually operated ball valves and closed bottom taper plug valves for gas installations in buildings) |
| BS EN 334-1999 |
入口压力不大于100bar的气体压力调节器 |
(Gas pressure regulators for inlet pressures up to 100 bar) |
| BS EN 335-1-1992 |
木材和木基产品抗生物侵袭的危害类型.危害类型的划分 |
(Hazard classes of wood and wood-based products against biological attack - Classification of hazard classes) |
| BS EN 335-2-1992 |
木材和木制产品抗生物侵袭的危害类型.实心木材危害类别的应用指南 |
(Hazard classes of wood and wood-based products against biological attack - Guide to the application of hazard classes to solid wood) |
| BS EN 335-3-1996 |
木材和木制产品抗生物侵袭危害类型.木制板的应用 |
(Hazard classes of wood and wood-based products against biological attack - Application to wood-based panels) |
| BS EN 336-2003 |
结构木材.尺寸的允许偏差 |
(Structural timber - Sizes, permitted deviations) |
| BS EN 3377-1996 |
耐热钢FE-PA92HT(A286)制自锁六角螺母.等级:1100 MPa(室温)/425℃ |
(Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425℃) |
| BS EN 3379-1996 |
镀银耐热镍基合金NI-P101HT(沃斯帕洛尹合金)制中长螺纹紧公差柄双六角头增高螺栓.等级:1210 MPa(室温)/730 |
(Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temp) |
| BS EN 338-2003 |
结构木材.强度类型 |
(Structural timber - Strength classes) |
| BS EN 3380-1996 |
安全环的固定.技术规范 |
(Rings, retaining - Technical specification) |
| BS EN 3381-1997 |
MoS2润滑的阳极氧化钛金属制短螺纹紧公差标准柄翼型十字槽100°标准埋头螺钉.等级:1100 MPa(室温)/315℃ |
(Screws, 100 ?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoSDOWN2 lubricated - Classification: 1100 MPa (at ambient temperatur) |
| BS EN 340-2004 |
防护服.一般要求 |
|
| BS EN 341-1993 |
预防高空降落物的个人用保护设备.降落装置 |
(Personal protective equipment against falls from a height - Descender devices) |
| BS EN 342-2004 |
防护服.保暖服 |
|
| BS EN 343-2003 |
防护服.防雨 |
(Protective clothing - Protection against rain) |
| BS EN 344-1-1993 |
专业应用的防护和职业鞋靴的安全.要求和试验标准 |
(Safety, protective and occupational footwear for professional use - Requirements and test methods) |
| BS EN 344-2-1997 |
专业用安全、保护和职业靴的附加要求和试验方法 |
(Safety, protective and occupational footwear for professional use - Additional requirements and test methods) |
| BS EN 3446-1995 |
用于仪器仪表不带耐蚀钢法兰的精密球轴承.尺寸和负载 |
(Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads) |
| BS EN 345-1-1993 |
专业应用的安全鞋靴.规范 |
(Safety footwear for professional use - Specification) |
| BS EN 345-2-1997 |
专业用安全靴的附加要求和试验方法 |
(Safety footwear for professional use - Additional specifications) |
| BS EN 346-1-1993 |
专业用保护靴.规范 |
(Protective footwear for professional use - Specification) |
| BS EN 346-2-1997 |
专业用保护靴.补充规范 |
(Protective footwear for professional use - Additional specifications) |
| BS EN 347-1-1993 |
专业应用的职业鞋靴.规范 |
(Occupational footwear for professional use - Specification) |
| BS EN 347-2-1997 |
专业用职业靴.补充规范 |
(Occupational footwear for professional use - Additional specifications) |
| BS EN 3475-100-2002 |
航空航天系列.飞行器用电缆.试验方法.通则 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - General) |
| BS EN 3475-201-2002 |
航空航天系列.飞行器用电缆.试验方法.外观检查 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination) |
| BS EN 3475-202-2002 |
航空航天系列.飞行器用电缆.试验方法.质量 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Mass) |
| BS EN 3475-301-2002 |
航空航天系列.飞行器用电缆.试验方法.每单位长度欧姆电阻 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length) |
| BS EN 3475-302-2002 |
航空航天系列.飞行器用电缆.试验方法.电压保护试验 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Voltage proof test) |
| BS EN 3475-303-2002 |
航空航天系列.飞行器用电缆.试验方法.绝缘电阻 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance) |
| BS EN 3475-304-2002 |
航空航天系列.飞行器用电缆.试验方法.表面电阻 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Surface resistance) |
| BS EN 3475-305-2002 |
航空航天系列.飞行器用电缆.试验方法.过载电阻 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Overload resistance) |
| BS EN 3475-401-2002 |
航空航天系列.飞行器用电缆.试验方法.加速老化 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing) |
| BS EN 3475-402-2002 |
航空航天系列.飞行器用电缆.试验方法.收缩性和脱层 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination) |
| BS EN 3475-403-2002 |
航空航天系列.飞行器用电缆.试验方法.脱层和阻塞 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Delamination and blocking) |
| BS EN 3475-404-2002 |
航空航天系列.飞行器用电缆.试验方法.热冲击 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal shock) |
| BS EN 3475-405-2002 |
航空航天系列.飞行器用电缆.试验方法.环境温度下的弯曲 |
(Aerospace series - Cables, electrical, aircraft use - Test methods - Bending at ambient temperature) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com