标准号 |
中文名称 |
英文名称 |
| BS ISO 14900-2001 |
塑料.聚氨酯生产用多醇.羟基值测定 |
Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number |
| BS ISO 14910-1-1998 |
塑料.热塑聚酯/聚醚和聚酯/聚醚铸模和挤压弹性体.命名体系和规范基础 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Designation system and basis for specifications |
| BS ISO 14910-2-1998 |
塑料.热塑聚酯/聚醚和聚酯/聚醚铸模和挤压弹性体.试样制备和性能测定 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Preparation of test specimens and determination of properties |
| BS ISO 14912-2003 |
气体分析.气体混合成份数据的转换 |
(Gas analysis - Conversion of gas mixture composition data) |
| BS ISO 14943-2004 |
核燃料技术.核临界安全的相关管理标准 |
|
| BS ISO 14949-2001 |
外科植入物.两节附加加工的硅弹性体 |
Implants for surgery - Two-part addition-cure silicone elastomers |
| BS ISO 14950-2004 |
航天系统.不载人航天器的可操作性 |
|
| BS ISO 14951-1-1999 |
航天系统.流体特性.氧 |
Space systems - Fluid characteristics - Oxygen |
| BS ISO 14951-10-1999 |
航天系统.流体特性.水 |
Space systems - Fluid characteristics - Water |
| BS ISO 14951-11-1999 |
航天系统.流体特性.氨 |
Space systems - Fluid characteristics - Ammonia |
| BS ISO 14951-12-1999 |
航天系统.流体特性.二氧化碳 |
Space systems - Fluid characteristics - Carbon dioxide |
| BS ISO 14951-13-1999 |
航天系统.流体特性.呼吸用空气 |
Space systems - Fluid characteristics - Breathing air |
| BS ISO 14951-2-1999 |
航天系统.流体特性.氢推进剂 |
Space systems - Fluid characteristics - Hydrogen propellant |
| BS ISO 14951-3-1999 |
航天系统.流体特性.氮 |
Space systems - Fluid characteristics - Nitrogen |
| BS ISO 14951-4-1999 |
航天系统.流体特性.氦 |
Space systems - Fluid characteristics - Helium |
| BS ISO 14951-5-1999 |
航天系统.流体特性.四氧化氮推进剂 |
Space systems - Fluid characteristics - Nitrogen tetroxide propellant |
| BS ISO 14951-6-1999 |
航天系统.流体特性.一甲基联氨推进剂 |
Space systems - Fluid characteristics - Monomethylhydrazine propellant |
| BS ISO 14951-7-1999 |
航天系统.流体特性.联氨推进剂 |
Space systems - Fluid characteristics - Hydrazine propellant |
| BS ISO 14951-8-1999 |
航天系统.流体特性.煤油推进剂 |
Space systems - Fluid characteristics - Kerosene propellant |
| BS ISO 14951-9-1999 |
航天系统.流体特性.氩 |
Space systems - Fluid characteristics - Argon |
| BS ISO 14952-1-2004 |
航天系统.液体系统的表面清洁度.词汇 |
|
| BS ISO 14952-2-2004 |
航天系统.液体系统的表面清洁度.清洁度等级 |
|
| BS ISO 14952-3-2004 |
航天系统.液体系统的表面清洁度.不挥发性残流物和颗粒污染物的测定用分析程序 |
|
| BS ISO 14952-4-2004 |
航天系统.液体系统的表面清洁度.粗略清洁过程 |
|
| BS ISO 14952-4-2004 |
航天系统.液体系统的表面清洁度.粗略清洁过程 |
|
| BS ISO 14952-5-2004 |
航天系统.液体系统的表面清洁度.干燥过程 |
|
| BS ISO 14952-6-2004 |
航天系统.液体系统的表面清洁度.精确清洁过程 |
|
| BS ISO 14953-2000 |
航天系统.结构设计.发射的飞行器静态合格性试验用负载水平的测定 |
Space systems - Structural design - Determination of loading levels for static qualification testing of launch vehicles |
| BS ISO 1496-2-1997 |
第1系列货运集装箱.规范和试验.保温集装箱 |
(Series 1 freight containers - Specification and testing - Thermal containers) |
| BS ISO 1496-3-1995 |
货运集装箱系列1.规范和试验.第3部分:液体、气体和加压散料用罐式集装箱 |
Series 1 freight containers - Specification and testing - Tank containers for liquids, gases and pressurized dry bulk |
| BS ISO 1496-4-1995 |
货运集装箱系列1.规范和试验.不加压的散料集装箱 |
Series 1 freight containers - Specification and testing - Non-pressurized containers for dry bulk |
| BS ISO 14961-2002 |
空间数据和信息传输系统.参数值语言规范 |
Space data and information transfer systems - Parameter value language specification |
| BS ISO 14964-2001 |
机械振动.固定结构的振动.振动的测量和评价中质量管理的特殊要求 |
Mechanical vibration and shock - Vibration of stationary structures - Specific requirements for quality management in measurement and evaluation of vibration |
| BS ISO 14965-2000 |
环境空气.全部无甲烷有机化合物的测定.低温预浓缩和直接火焰电离探测法 |
Ambient air - Determination of total non-methane organic compounds - Cryogenic preconcentration and direct flame ionization detection method |
| BS ISO 14966-2002 |
环境空气.无机纤维颗粒的数值浓度的测定.扫描电子显微镜检查法 |
Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method |
| BS ISO 14968-2000 |
纸和纸板.切割尺寸办公室用纸.一包纸卷曲的测量 |
Paper and board - Cut-size office paper - Measurement of curl in a pack of sheets |
| BS ISO 14972-1999 |
带over-needle外部管内导管的一次性灭菌塞 |
Sterile obturators for single use with over-needle peripheral intravascular catheters |
| BS ISO 14975-2001 |
表面化学分析.信息格式 |
Surface chemical analysis - Information formats |
| BS ISO 14976-1998 |
表面化学分析.数据传送格式 |
Surface chemical analysis - Data transfer format |
| BS ISO 14985-1999 |
工程图纸的硬拷贝输出.控制文件的结构规范 |
Hard-copy output of engineering drawings - Specification for the structure of control files |
| BS ISO 14997-2003 |
光学和光学仪器.测定光学件表面缺陷的试验方法 |
(Optics and optical instruments - Test methods for surface imperfections of optical elements) |
| BS ISO 15-1998 |
滚动轴承.径向轴承.边界尺寸,一般计划 |
Rolling bearings - Radial bearings - Boundary dimensions, general plan |
| BS ISO 15001-2003 |
麻醉和呼吸设备.与氧气的兼容性 |
(Anaesthetic and respiratory equipment - Compatibility with oxygen) |
| BS ISO 15009-2002 |
土壤质量.挥发性香料烃类物质、萘和卤化烃含量的气相色谱分析测定.有热解吸作用的洗涤和打击法 |
Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption |
| BS ISO 15010-1998 |
输液和输注瓶用一次性悬吊装置.要求和试验方法 |
Disposable hanging devices for transfusion and infusion bottles - Requirements and test methods |
| BS ISO 15016-2002 |
船舶和海上技术.用速度试验数据分析法对速度和动力性能的评定导则 |
Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data |
| BS ISO 15022-1-1999 |
证券.文电图解(数据区字典).数据区和文电设计规则和导则 |
Securities - Scheme for messages (data field dictionary) - Data field and message design rules and guidelines |
| BS ISO 15022-2-1999 |
证券.文电图解(数据区字典).数据区字典和文电目录的维护. |
Securities - Scheme for messages (data field dictionary) - Maintenance of the data field dictionary and catalogue of messages |
| BS ISO 15023-1-2002 |
塑料.聚乙烯醇材料.名称与符号系统和基本规范 |
Plastics - Poly(vinyl alcohol) (PVAL) materials - Designation system and basis for specifications |
| BS ISO 15023-2-2003 |
塑料.聚乙烯醇(PVAL)材料.特性的测定 |
(Plastics - Poly(vinyl alcohol) (PVAL) materials - Determination of properties) |
| BS ISO 15024-2002 |
纤维增强塑料复合材料.无方向性增强材料的模式I层间断裂韧性(UPGIC)的测定 |
Fibre-reinforced plastic composites - Determination of mode I interlaminar fracture toughness, GDOWNiDOWNc, for unidirectionally reinforced materials |
| BS ISO 15032-2000 |
修复术.髋关节结构试验 |
Prostheses - Structural testing of hip joints |
| BS ISO 15033-2000 |
塑料.用高效液相色谱分析法测定己内酰胺及其周期和线性集聚物 |
Plastics - Determination of caprolactam and its cyclic and linear oligomers by HPLC |
| BS ISO 15034-2000 |
化合物.预浸料坯.树脂流动的测定 |
Composites - Prepregs - Determination of resin flow |
| BS ISO 15037-1-1999 |
道路车辆.车辆动力学试验方法.第1部分:客车的一般条件 |
Road vehicles - Vehicle dynamics test methods - General conditions for passenger cars |
| BS ISO 15037-2-2003 |
道路车辆.车辆动力学试验方法.重型车辆和公共汽车的一般条件 |
Road vehicles - Vehicle dynamics test methods - General conditions for heavy vehicles and buses |
| BS ISO 15038-1999 |
塑料.不饱和聚酯热固材料的有机聚酯交联剂.活性氧含量的测定 |
Plastics - Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials - Determination of active-oxygen content |
| BS ISO 15040-2000 |
复合物.预浸料坯.胶凝时间的测定 |
Composites - Prepregs - Determination of gel time |
| BS ISO 1505-1993 |
纺织机械.染整设备的有关宽度.额定宽度范围和定义 |
Textile machinery - Widths relating to dyeing and finishing machines - Definitions and range of nominal widths |
| BS ISO 15072-2000 |
带有米制细牙螺纹法兰的六角螺栓.小型系列.产品等级A |
Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A |
| BS ISO 15078-1998 |
林业机械.原木装载机.双层驾驶员控制的操作方法和位置 |
Machinery for forestry - Log loaders - Location and method of operation of two-lever operator controls |
| BS ISO 15086-1-2001 |
液力传动.件和系统中液载噪音特性的测定.说明 |
Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Hydraulic fluid power - Determination of the fluid borne noise characteristics of components and systems - Introduction |
| BS ISO 15086-2-2000 |
液压动力.件和系统中液载噪音特性的测定.管道液流中声音速度的测量 |
Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe |
| BS ISO 15100-2001 |
塑料.增强纤维.短切原丝.松密度的测定 |
Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density |
| BS ISO 15105-1-2002 |
塑料.薄模和薄模纸.用压差法测定气体穿透率 |
Plastics - Film and sheeting - Determination of gas-transmission rate - Differential-pressure method |
| BS ISO 15105-2-2003 |
塑料.薄膜和片材.气体传输率的测定.等压法 |
(Plastics - Film and sheeting - Determination of gas-transmission rate - Equal-pressure method) |
| BS ISO 15113-2000 |
橡胶.摩擦特性的测定 |
Rubber - Determination of frictional properties |
| BS ISO 15117-1-2004 |
煤流动性.料斗抖动 |
|
| BS ISO 15142-1-2003 |
外科植入物.金属髓内插钉系统.髓内插钉 |
(Implants for surgery - Metal intramedullary nailing systems - Intramedullary nails) |
| BS ISO 15142-2-2003 |
外科植入物.金属髓内插钉系统.锁定件 |
(Implants for surgery - Metal intramedullary nailing systems - Locking components) |
| BS ISO 15142-3-2003 |
外科植入物.金属骨髓腔内插钉系统.连接设备和扩孔钻直径测量 |
(Implants for surgery - Metal intramedullary nailing systems - Connection devices and reamer diameter measurements) |
| BS ISO 15152-2003 |
烟草.用作烟碱的总生物碱含量的测定.续流分析法 |
(Tobacco - Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method) |
| BS ISO 15153-2003 |
烟草.还原物质含量的测定.续流分析法 |
(Tobacco - Determination of the content of reducing substances - Continuous-flow analysis method) |
| BS ISO 15154-2003 |
烟草.还原的碳水化物含量的测定.续流分析法 |
(Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method) |
| BS ISO 15161-2001 |
食品与饮料业用ISO 9001-2000的应用导则 |
Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| BS ISO 15166-1-1998 |
胶粘剂.大块样品的准备方法.第1部分:由两部分组成的系统 |
Adhesives - Methods of preparing bulk specimens - Two-part systems |
| BS ISO 15166-2-2001 |
胶粘剂.大块样品的准备方法.高温处理一部分系统 |
Adhesives - Methods of preparing bulk specimens - Elevated-temperature-curing one-part systems |
| BS ISO 15169-2004 |
石油和液态石油产品.使用混合罐测量系统测定立式圆筒状油罐中烃类的体积、密度和质量 |
|
| BS ISO 15171-1-1999 |
液压和一般用途的连接.诊断用途的液压耦合.压力下非连接耦合 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling not for connection under pressure |
| BS ISO 15171-2-2000 |
流体动力和通用连接器.鉴定目的用液压联轴器.加压连接用端头为M16×2的联轴器 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling with M16 x 2 end for connection under pressure |
| BS ISO 15175-2004 |
土质.与地下水保护有关的土壤的表征 |
|
| BS ISO 15176-2002 |
土壤质量.挖掘土壤和要求再利用的其他土壤特征 |
Soil quality - Characterization of excavated soil and other soil materials intended for re-use |
| BS ISO 15186-1-2000 |
声学.建筑物隔声测量和用声强测量建筑部件.实验室条件 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Laboratory conditions |
| BS ISO 15186-2-2003 |
声学.用声强作建筑物和建筑构件的隔声测量.现场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Field measurements) |
| BS ISO 15186-3-2002 |
声学.利用声强度测量建筑物和建筑部件的隔音情况.低频实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Laboratory measurements at low frequencies |
| BS ISO 15188-2001 |
术语标准化项目管理指南 |
Project management guidelines for terminology standardization |
| BS ISO 15190-2003 |
医学实验室.安全要求 |
(Medical laboratories - Requirements for safety) |
| BS ISO 15198-2004 |
临床实验室医学.体外诊断医疗装置.生产商验证的用户质量控制规程 |
|
| BS ISO 15198-2004 |
临床实验室药物.体外诊断医疗设备.由制造商证实的用户质量控制程序 |
|
| BS ISO 15202-1-2000 |
工作场所空气.用感应耦合等离子体原子发射光谱法对气载颗粒物质中金属和非金属的测定.取样 |
Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling |
| BS ISO 15202-2-2005 |
工作场所空气.用感应耦合等离子体原子发射光谱法测定气载颗粒物质中的金属和准金属.样品制备 |
|
| BS ISO 15202-2-2005 |
工作场所空气.用感应耦合等离子体原子发射光谱法测定气载颗粒物质中的金属和准金属.样品制备 |
|
| BS ISO 15202-3-2004 |
工作场所空气.用感应耦合等离子体原子发射光谱法测定气载颗粒物质中的金属和类金属物.分析 |
|
| BS ISO 15213-2003 |
食品和动物饲料的微生物学.计算厌氧条件下用亚硫酸盐抑制细菌生长的水平法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions) |
| BS ISO 15214-1998 |
食品和动物饲料的微生物学.适温性乳酸菌的水平计数法.30℃的菌落计数技术 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of mesophilic lactic acid bacteria - Colony-count technique at 30 鳦 |
| BS ISO 15217-2001 |
液压传动系统和件.16平方毫米接地接点电连接器.特性和要求 |
Fluid power systems and components - 16mm square electrical connector with earth contact - Characteristics and requirements |
| BS ISO 15218-2003 |
气液传动.3/2电磁阀.安装接口表面 |
Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces |
| BS ISO 15227-2000 |
光学和光学仪器.显微镜.立体可视显微镜试验 |
Optics and optical instruments - Microscopes - Testing of stereomicroscopes |
| BS ISO 15237-2003 |
固体矿物燃料.煤中汞的总含量测定 |
(Solid mineral fuels - Determination of total mercury content of coal) |
| BS ISO 15238-2003 |
固体矿物燃料.煤中镉的总含量测定 |
(Solid mineral fuels - Determination of total cadmium content of coal) |
| BS ISO 15242-1-2004 |
滚动轴承.振动测量方法.基本原则 |
|
| BS ISO 15243-2004 |
滚动轴承.损害和故障.术语、特性和成因 |
|
| BS ISO 15261-2004 |
振动和冲击发生系统.词汇 |
|
| BS ISO 15303-2001 |
动植物脂肪和油.GC/MS法检测和识别挥发性有机杂质 |
Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminent by GC/MS |
| BS ISO 15310-2000 |
纤维增强的塑料化合物.用板弯曲方法测定面内剪切模量 |
Reinforced plastics - Determination of the in-plane shear modulus by the plate twist method |
| BS ISO 15312-2004 |
滚动轴承.热速额定值.计算和系数 |
|
| BS ISO 15314-2005 |
塑料.海上曝光法 |
|
| BS ISO 15319-2001 |
再生纸浆.用反射光仪器法评价可视原料中的杂质 |
Recycled pulps - Estimation of visible contraries by instrumental means using reflected light |
| BS ISO 15323-2002 |
奶粉蛋白质产品.氮溶解率测定 |
Dried milk protein products - Determination of nitrogen solubility index |
| BS ISO 15324-2001 |
金属和合金的腐蚀.用滴水蒸发试验评价应力腐蚀裂纹 |
Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test |
| BS ISO 15350-2001 |
钢铁.碳和硫总含量的测定.感应炉中燃烧后的红外线吸收法(常规法) |
Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) |
| BS ISO 15359-2000 |
纸和纸板.摩擦系数的静态和动态测定.水平面法 |
Paper and board - Determination of the static and kinetic coefficients of friction - Horizontal plane method |
| BS ISO 15360-1-2001 |
再生纸浆.粘性和塑性的估测.外观检查法 |
Recycled pulps - Estimation of stickies and plastics - Visual method |
| BS ISO 15361-2001 |
纸浆.在湿润或干燥的条件下测定零距抗张强度 |
Pulps - Determination of zero-span tensile strength, wet or dry |
| BS ISO 15364-2000 |
船舶技术.货船用压力/真空阀 |
Ships and marine technology. Pressure/vacuum valves for cargo tanks |
| BS ISO 15368-2001 |
光学和光学仪器.平面的反射系数的测定和平行板透射率的测定 |
Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements |
| BS ISO 15370-2004 |
船舶与海上技术.客轮的低位照明.布局 |
|
| BS ISO 15370-2004 |
船舶与海上技术.客轮的低位照明.布局 |
|
| BS ISO 15371-2000 |
船舶技术.船上厨房的深油烹饪设备保护用灭火系统.着火试验 |
Ships and marine technology - Fire-extinguishing systems for protection of galley deep-fat cooking equipment - Fire tests |
| BS ISO 15372-2003 |
船舶与海上技术.充气式救生艇.充气室用漆布 |
(Ships and marine technology - Inflatable rescue boats - Coated fabrics for inflatable chambers) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com