标准号 |
中文名称 |
英文名称 |
| BS ISO 4308-1-2003 |
起重机和提升设备.钢丝绳的选用.总则 |
(Cranes and lifting appliances - Selection of wire ropes - General) |
| BS ISO 4309-2004 |
起重机.金属丝绳.保养、维修、安装、检查和报废 |
|
| BS ISO 4365-2005 |
明渠水流.河、河渠泥沙.含沙量、粒度分布和相对密度的测定 |
|
| BS ISO 4375-2001 |
流体比重测定.用于水流水文测量的索道装置 |
Hydrometric determinations - Cableway systems for stream gauging |
| BS ISO 4377-2002 |
比重测定.使用构造物的明渠液体流量测量.V形平面溢流堰 |
Hydrometric determinations - Flow measurement in open channels using structures - Flat-V weirs |
| BS ISO 4381-2000 |
滑动轴承.多层滑动轴承用铅锡铸造合金 |
Plain bearings - Lead and tin casting alloys for multilayer plain bearings |
| BS ISO 4383-2000 |
滑动轴承.薄壁滑动轴承用多层材料 |
Plain bearings - Multilayer materials for thin-walled plain bearings |
| BS ISO 4384-1-2000 |
滑动轴承.轴承合金的硬度试验.复合材料 |
Plain bearings - Hardness testing of bearing metals - Compound materials |
| BS ISO 4392-1-2002 |
液压传动.发动机特性测定.在恒低速和常压下 |
Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure |
| BS ISO 4392-2-2002 |
液压传动.发动机特性测定.稳定性 |
Hydraulic fluid power - Determination of characteristics of motors - Startability |
| BS ISO 4401-1996 |
液压传动.四油口定向控制阀.装配面 |
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces |
| BS ISO 4404-1-2002 |
石油和相关产品.耐火液压液耐腐蚀性测定.含水液体 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Water-containing fluids |
| BS ISO 4404-1998 |
石油和相关产品.液压系统用含水耐火液体的耐腐蚀性测定 |
Petroleum and related products - Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
| BS ISO 4406-2000 |
液压传动.流体.固体微粒污染分级编码法 |
Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles |
| BS ISO 4407-2002 |
液压传动.液压液污染.用光学显微镜计数法测定粒状物污染 |
Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope |
| BS ISO 4413-1998 |
液压传动.与系统相关的一般规则 |
Hydraulic fluid power - General rules relating to systems |
| BS ISO 4414-1998 |
气压传动.与系统相关的一般规则 |
Pneumatic fluid power - General rules relating to systems |
| BS ISO 4433-1-1998 |
热塑管.耐液体化学药品的性能.分类.第1部分:浸入试验 |
Thermoplastic pipes - Resistance to liquid chemicals - Classification - Immersion test method |
| BS ISO 4433-2-1998 |
热塑管.耐液体化学药品的性能.分类.第2部分:聚烯烃管 |
Thermoplastics pipes - Resistance to liquid chemicals - Classification - Polyolefin pipes |
| BS ISO 4433-3-1998 |
热塑管.耐液体化学药品的性能.分类.第3部分:未增塑聚氯乙烯(PVC-U),耐冲性聚氯乙烯(PVC-HI)和氯化聚氯乙烯(PVC-C)管 |
Thermoplastic pipes - Resistance to liquid chemicals - Classification - Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes |
| BS ISO 4433-4-1998 |
热塑管.耐液体化学药品的性能.分类.第4部分:聚偏氟乙烯管 |
Thermoplastics pipes - Resistance to liquid chemicals - Classification - Poly(vinylidene fluoride) (PVDF) pipes |
| BS ISO 449-1997 |
造船和航海技术.A级磁罗盘、罗盘座和方位阅读装置 |
Ships and marine technology. Magnetic compasses, binnacles and azimuth reading devices. Class A |
| BS ISO 4507-2000 |
烧结铁类材料.渗碳或碳氮共渗.用微型硬度测试法测定和验证外层淬火的深度 |
Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test |
| BS ISO 4512-2001 |
石油和液态石油产品.储油罐中液位的测量设备.人工法 |
Petroleum and liquid petroleum products - Equipment for measurement of liquid levels in storage tanks - Manual methods |
| BS ISO 4524-2-2000 |
金属镀层.金及金合金电镀层的试验方法.混合流动气体(MFG)环境试验 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Mixed flowing gas (MFG) environmental tests |
| BS ISO 4525-2003 |
金属镀层.塑料材料上的镍加铬电镀层 |
Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials |
| BS ISO 4528-2000 |
上釉和瓷釉精整.物品上釉和涂以瓷釉面积的试验方法的选择 |
Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelein enamelled areas of articles |
| BS ISO 4587-2003 |
粘合剂.刚性对刚性的粘接组件拉伸搭接剪切强度的测定 |
(Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies) |
| BS ISO 4589-1-1997 |
塑料.通过氧指数测定其燃烧性.第1部分:总则 |
Plastics. Determination of burning behaviour by oxygen index. Guidance |
| BS ISO 4602-1998 |
增强材料.机织物.整经和整纬单长度纱的数量测定 |
Reinforcements - Woven fabrics - Determination of number of yarns per unit length of warp and weft |
| BS ISO 4603-1996 |
纺织玻璃纤维.织物.厚度的测定 |
Textile glass - Woven fabrics - Determination of thickness |
| BS ISO 4606-1995 |
纺织玻璃纤维.织物.用条法测定断裂张力和断裂伸长 |
Textile glass - Woven fabric - Determination of tensile breaking force and elongation at break by the strip method |
| BS ISO 4619-1998 |
色漆和清漆用干燥剂 |
Driers for paints and varnishes |
| BS ISO 4625-1-2005 |
色漆和清漆用粘合剂.软化点的测定.环和球法 |
|
| BS ISO 4625-1-2005 |
色漆和清漆用粘合剂.软化点的测定.环和球法 |
|
| BS ISO 4625-2-2005 |
色漆和清漆用粘合剂.软化点的测定.杯和球法 |
|
| BS ISO 4639-2-1996 |
内燃机燃料管路用橡胶管和软管.规范.第2部分:已氧化燃料 |
Rubber tubing and hoses for fuel circuits for internal-combustion engines - Specification - Oxygenated fuels |
| BS ISO 4639-3-1996 |
内燃机燃料管路用橡胶管和软管.规范.第3部分:被氧化的燃料 |
Rubber tubing and hoses for fuel circuits for internal-combustion engines - Specification - Oxidized fuels |
| BS ISO 464-1995 |
滚动轴承.有弹簧固定环的径向轴承尺寸 |
Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances |
| BS ISO 4649-2002 |
硫化或热塑性橡胶.用旋转滚筒装置测定耐磨性 |
(Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device) |
| BS ISO 4658-2000 |
丙烯腈一丁二烯橡胶(NBR).评定过程 |
Acrylonitrile-butadiene rubber (NBR) - Evaluation procedure |
| BS ISO 4659-2003 |
苯乙烯-丁二烯橡胶(炭黑或炭黑和油母炼胶).评价方法 |
Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) - Evaluation procedure |
| BS ISO 4660-2000 |
天然生橡胶.颜色指数试验 |
Rubber, raw natural - Colour index test |
| BS ISO 4664-1-2005 |
硫化或热塑性橡胶.动态性能的测定.通用指南 |
|
| BS ISO 4664-1998 |
橡胶.动态性能测定指南 |
Rubber - Guide to the determination of dynamic properties |
| BS ISO 4665-2001 |
硫化和热塑橡胶.耐风化能力 |
Rubber, vulcanized and thermoplastic - Resistance to weathering |
| BS ISO 4689-2-2004 |
铁矿石.硫含量的测定.燃烧和滴定法 |
|
| BS ISO 4689-3-2004 |
铁矿石.硫含量的测定.燃烧和红外线法 |
|
| BS ISO 4695-1996 |
铁矿石.还原性的测定 |
Iron ores - Determination of reducibility |
| BS ISO 4698-1995 |
铁矿石颗粒.自由膨胀指数测定 |
Iron ore pellets - Determination of relative free-swelling index |
| BS ISO 4703-2001 |
双柱式平面磨床的验收条件.导轨磨床.精度试验 |
Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy |
| BS ISO 4708-2000 |
复合软木.填料.试验方法 |
Composition cork - Gasket material - Test methods |
| BS ISO 4709-2001 |
复合软木.垫圈材料.分类体系、要求、取样、包装和标记 |
Composition cork - Gasket material - Classification system, requirements, sampling, packing and marking |
| BS ISO 4710-2000 |
发泡的酒类和充气的酒类的圆柱形软木瓶塞.特性 |
Cork - Cylindrical stoppers for sparkling wines and gasified wines - Characteristics |
| BS ISO 4714-2000 |
复合软木.规范、抽样、包装和作标记 |
Composition cork - Specifications, sampling, packaging and marking |
| BS ISO 4715-2001 |
香精油.蒸发后残渣的定量测定 |
Essential oils - Quantitative evaluation of residue on evaporation |
| BS ISO 4718-2004 |
柠檬草油(香茅属锯齿状的) |
|
| BS ISO 4718-2004 |
柠檬草油 |
|
| BS ISO 472-2000 |
塑料.词汇 |
Plastics. Vocabulary |
| BS ISO 4720-2000 |
香精油.命名 |
Essential oils - Nomenclature |
| BS ISO 4724-2004 |
弗吉尼亚柏木油 |
|
| BS ISO 4724-2004 |
弗吉尼亚柏木油 |
|
| BS ISO 4725-2004 |
得克萨斯柏木油 |
|
| BS ISO 4725-2004 |
得克萨斯柏木油 |
|
| BS ISO 4728-2003 |
西班牙野生牛至菜油 |
(Oil of Spanish wild marjoram (Thymus mastichina L.)) |
| BS ISO 4730-2004 |
白千层油.对孟烯-1-醇-4型(茶树油) |
|
| BS ISO 4730-2004 |
白千层油.萜品醇-1-醇-4型(茶树油) |
|
| BS ISO 4733-2004 |
小豆寇油 |
|
| BS ISO 4733-2004 |
小豆寇油 |
|
| BS ISO 4782-1998 |
工业金属丝网筛和金属丝筛布用金属丝规范 |
Specification for metal wire for industrial wire screens and woven wire cloth |
| BS ISO 4795-1997 |
实验室玻璃器皿.温度计球头用玻璃 |
Laboratory glassware - Glass for thermometer bulbs |
| BS ISO 4798-1997 |
实验室玻璃器皿.过滤漏斗 |
Laboratory glassware - Filter funnels |
| BS ISO 4800-1999 |
实验室玻璃器皿.分液漏斗和滴液漏斗 |
Laboratory glassware - Separating funnels and dropping funnels |
| BS ISO 4834-1998 |
电影技术.不包括成条发行拷贝的磁性声带试验胶片.基本技术特性 |
Cinematography - Magnetic sound test films excluding striped release prints - Basic technical characteristics |
| BS ISO 486-1995 |
电影技术.16mm电影胶片和穿孔的8mmR型电影胶片.裁剪和穿孔尺寸 |
Cinematography - 16 mm motion-picture film perforated 8 mm Type R. Cutting and perforating dimensions |
| BS ISO 487-1998 |
S和C型滚子链附件和链轮 |
Steel roller chains, types S and C, attachments and sprockets |
| BS ISO 4880-1997 |
织物和纺织品的燃烧性能.词汇 |
Burning behaviour of textiles and textile products - Vocabulary |
| BS ISO 490-1995 |
电影技术.在沿单边穿孔的16mm电影胶片上录音用磁带和磁头缝隙(1型).位置和宽度尺寸 |
Cinematography - Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) - Positions and width dimensions |
| BS ISO 4902-1990 |
信息技术.数据通信.37路数据终端设备/数据通信设备(DTE/DCE)接口连接器和插脚号分配 |
Information technology - Data communication - 37-pole DTE/DCE interface connector and contact number assignments |
| BS ISO 4903-1990 |
信息技术.数据通信.15路数据终端设备/数据通信设备(DTE/DCE)接口连接器和插脚号分配 |
Information technology - Data communication - 15-pole DTE/DCE interface connector and contact number assignments |
| BS ISO 4909-2000 |
银行卡.3列磁道的磁带数据量 |
Bank cards - Magnetic stripe data content for track 3 |
| BS ISO 491-2002 |
电影摄影.35mm电影胶片和磁片.剪切和穿孔尺寸 |
Cinematography - 35 mm motion-picture film and magnetic film - Cutting and perforating dimensions |
| BS ISO 4912-2002 |
纺织品.棉纤维.成熟度评估.显微法 |
Textiles - Cotton fibres - Evaluation of maturity - Microscopic method |
| BS ISO 492-2002 |
滚动轴承.径向轴承.公差 |
Rolling bearings - Radial bearings - Tolerances |
| BS ISO 4925-2005 |
道路车辆.液压系统用非石油基制动液规范 |
|
| BS ISO 5-3-1996 |
摄影技术.密度测量.第3部分:光谱条件 |
Photography - Density measurements - Spectral conditions |
| BS ISO 5-4-1995 |
摄影.密度测量.反射密度测量用几何学条件 |
Photography - Density measurements - Geometric conditions for reflection density |
| BS ISO 5007-2003 |
农用轮式拖拉机.驾驶员的座位.传动振动的实验室测量方法 |
(Agricultural wheeled tractors - operator’s seat - Laboratory measurement of transmitted vibration) |
| BS ISO 5008-2002 |
农业轮式拖拉机和田间作业机械.操作员全身振动试验 |
Agricultural wheeled tractors and field machinery - Measurement of whole-body vibration of the operator |
| BS ISO 5011-2001 |
内燃机和压缩机的空气进气清洁设备.性能测试 |
Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing |
| BS ISO 5024-1999 |
石油液体和液化石油气体.测量.标准参比条件 |
Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions |
| BS ISO 5025-1998 |
增强产品.机织物.宽度和长度的测定 |
Reinforcement products - Woven fabrics - Determination of width and length |
| BS ISO 5057-1998 |
工业卡车.叉式起重车叉杆的修理和检验 |
Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks |
| BS ISO 509-1996 |
托盘.主要尺寸 |
Pallet trucks - Principal dimensions |
| BS ISO 513-2004 |
有规定切割边界的金属切削加工用硬质切削材料的分类和应用.用途大组和小组的名称与符号 |
|
| BS ISO 5131-1996 |
声学.农业和林业用拖拉机和机械.操作者座位上的噪音测量.检测方法 |
Acoustics - Tractors and machinery for agriculture and forestry - Measurement of noise at the operator`s position - Survey method |
| BS ISO 516-1999 |
摄影技术.摄影机快门.定时 |
Photography - Camera shutters - Timing |
| BS ISO 5168-2005 |
流体流量的测量.不确定度评估程序 |
|
| BS ISO 5243-2004 |
纺织机械和附件.织机综框和线锭的标准号 |
|
| BS ISO 5248-2003 |
纺织机械和附件.染整机械.辅助装置词汇 |
(Textile machinery and accessories - Dyeing and finishing machinery - Vocabulary of ancillary devices) |
| BS ISO 525-1999 |
粘合磨料制品.总要求 |
Bonded abrasive products - General requirements |
| BS ISO 5250-2003 |
纺织机械与附件.染整机械.拉幅机和热处理机械词汇 |
(Textile machinery and accessories - Dyeing and finishing machinery - Terms for tentering and heat-treatment machinery) |
| BS ISO 5269-1-1999 |
纸浆.试验用实验室纸板的制备.第1部分:常规纸制造法 |
Pulps. Preparation of laboratory sheets for testing. Conventional sheet-former method |
| BS ISO 5285-2004 |
传送带.储存和搬运指南 |
|
| BS ISO 5287-2003 |
皮带传动.汽车工业用窄V带.疲劳试验 |
(Belt drives - Narrow V-belts for the automotive industry - Fatigue test) |
| BS ISO 5288-2001 |
同步皮带传动.词汇 |
Synchronous belt drives - Vocabulary |
| BS ISO 5290-2001 |
皮带传动.带接头的窄V型带的槽形皮带轮.9N/J,15N/J,20N/J和25N/J槽形截面(有效体系) |
Belt drives - Grooved pulleys for narrow V-belts - Groove sections 9N/J, 15N/J and 25N/J (effective system) |
| BS ISO 5293-2004 |
输送带.三个导辊的最小变换距离的测定 |
|
| BS ISO 53-1998 |
通用和重型机械的圆柱齿轮.标准基本齿条轮廓 |
Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile |
| BS ISO 5344-2004 |
电动振动发生系统.性能特性 |
|
| BS ISO 5348-1998 |
机械振动和冲击.加速计的机械安装 |
Mechanical vibration and shock - Mechanical mounting of accelerometers |
| BS ISO 5350-3-1998 |
纸浆.污物和碎片的测定.第3部分:通过反射光检验 |
Pulps - Estimation of dirt and shives - Inspection by reflected light |
| BS ISO 5391-2004 |
气动工具和机械.词汇 |
|
| BS ISO 54-1997 |
通用机械和重型机械的圆柱齿轮.模数 |
(Cylindrical gears for general engineering and for heavy engineering - Modules) |
| BS ISO 5414-1-2002 |
有扁方柄刀具的螺钉压紧刀具夹(立铣刀刀夹).第1部分:刀柄传动系统的尺寸 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Dimensions of the driving system of tool shanks |
| BS ISO 5414-2-2002 |
扁方柄刀具用螺钉压紧刀具夹(立铣刀刀夹).第2部分:夹头的连接尺寸 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Connecting dimensions of chucks and designation |
| BS ISO 5416-1997 |
直接还原铁.金属铁含量的测定.溴-甲醇滴定法 |
Direct reduced iron - Determination of metallic iron content - Bromide-methanol titrimetric method |
| BS ISO 5418-1-1995 |
铁矿石.铜含量的测定.第1部分:2,2`-吡奎瑙拉基(Biquinolyl)分光光度法 |
Iron ores - Determination of copper content - 2,2`-Biquinolyl spectrophotometric method |
| BS ISO 5426-2-1997 |
信息和文献工作.目录信息交换用拉丁字母的扩展代码字符集.第2部分:用于欧洲小语种和旧印刷体的拉丁字母 |
Information and documentation - Extension of the Latin alphabet coded character set for bibliographic information interchange - Latin characters used in minor European languages and obsolete typography |
| BS ISO 5431-1999 |
皮革.湿铬鞣革山羊皮.规范 |
Leather - Wet blue goat skins - Specification |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com