标准号 |
中文名称 |
英文名称 |
BS DD ENV 843-2-1996 |
高级工业陶瓷.单片陶瓷.室温机械性能.测定弹性模量 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Determination of elastic moduli) |
BS DD ENV 843-3-1997 |
高级工业陶瓷.块体陶瓷.室温机械性能.从固定应力率的弯曲强度试验测定裂纹增长参数的副标准 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Determination of subcritical crack growth parameters from constant stressing rate flexural strength test) |
BS DD ENV 843-4-1995 |
高级工业陶瓷.块体陶瓷.室温机械性能.维氏硬度计、努氏硬度计和洛氏硬度计和表面硬度试验 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperatures - Vickers, Knoop and Rockwell superficial hardness tests) |
BS DD ENV 843-5-1997 |
高级工业陶瓷.块体陶瓷.室温机械性能.统计分析 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical tests at room temperature - Statistical analysis) |
BS DD ENV 926-2-1999 |
滑翔降落伞设备.伞兵.要求和飞行试验 |
(Paragliding equipment - Paragliders - Requirements and flight tests) |
BS DD ENV 927-2-2000 |
涂料和清漆.外观木材的涂敷材料和涂敷系统.性能规范 |
(Paints and varnishes - Coating materials and coating systems for exterior wood - Performance specification) |
BS DD ENV 955-4-1997 |
耐热产品的化学分析.硅酸铝产品(火焰原子吸收分光光度测定法(FAAS) 和感应耦合等离子原子发射光谱(ICP)) |
(Chemical analysis of refractory products - Products containing silica and/or alumina (Analysis by flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrograp) |
BS DD ENV 993-11-1997 |
密集成形耐熔制品的试验方法.测定热冲击阻力 |
(Methods of test for dense shaped refractory products - Determination of resistance to thermal shock) |
BS DD ENV ISO 10722-1-1998 |
土工织物及其相关产品.在安装过程中模拟危险性程序.在晶粒材料中安装 |
(Geotextiles and geotextile-related products - Procedure for simulating damage during installation - Installation in granular materials) |
BS DD ENV ISO 11079-1999 |
寒冷环境评估.需求的防寒服装测定 |
(Evaluation of cold environments - Determination of required clothing insulation (IREQ)) |
BS DD ENV ISO 11133-1-2000 |
食品和饲料中的微生物.栽培过程质量保证和性能测试指南.实验室栽培过程质量保证的一般指南 |
(Microbiology of food and animal feeding stuffs - Guidelines on quality assurance and performance testing of culture media - General guidelines on quality assurance of culture media in the laboratory) |
BS DD ENV ISO 13438-2000 |
土工织物及其相关产品.测定抗氧化性的筛选方法 |
(Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation) |
BS DD ENV ISO 13530-1999 |
水质量.水分析用分析质量控制指南 |
(Water quality - Guide to analytical quality control for water analysis) |
BS DD ENV ISO 14253-2-2002 |
产品几何量技术规范(GPS).测量工件和测量设备的监测.在测量设备和产品验证校准中估算GPS测量中不确定度的指 |
(Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equi) |
BS DD ENV ISO 14815-2000 |
道路运输和交通远程信息管理.自动运载工具和设备验证.系统规范 |
(Road transport and traffic telematics - Automatic vehicle and equipment identification - System specification) |
BS DD ENV ISO 14816-2000 |
道路运输和交通远程信息管理.自动运载工具和设备验证.数字和数据结构 |
(Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structures) |
BS DD ENV ISO 14819-3-2001 |
交通和运行信息(TTI).通过交通文电编码TTI信息.ALERT的局部参考信息 |
(Traffic and travel information (TTI) - TTI messages via traffic message coding - Location referencing for ALERT-C) |
BS DD ENV ISO 14825-1997 |
地理学数据文档 |
(Geographic data files) |
BS DD ENV ISO 14904-1997 |
道路运输和交通远程信息管理. |
(Road transport and traffic telematics - Automatic fee collection (AFC) - Interface specification for clearing between operators) |
BS DD ENV ISO 14906-1999 |
道路运输和交通远程信息管理. |
(Road transport and traffic telematics (RTTT) - Electronic fee collection (EFC) - Application interface definition for dedicated short range communications) |
BS DD ENV ISO 14907-1-2001 |
道路运输和交通远程信息管理.电子费用收集(EFC).用户和固定设备试验程序.试验程序描述 |
(Road transport and traffic telematics (RTTT) - Electronic fee collection (EFC) - Test procedures for user and fixed equipment - Description of test procedures) |
BS DD ENV ISO 8502-1-1992 |
涂料和相关产品. 表面清洁度的评估试验.可溶解铁的腐蚀产品 |
(Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Field test for soluble iron corrosion products) |
BS DD ENV ISO/TR 13843-2001 |
水质.微生物法的作用指南 |
(Water quality - Guidance on validation of microbiological methods) |
BS DD IEC PAS 61754-20-2001 |
纤维光学连接器接口.LC型连接器门类 |
(Fibre optic connector interfaces - Type LC connector family) |
BS DD IEC PAS 62001-2004 |
HVDC系统用交流过滤器的规范和设计评价指南 |
|
BS DD IEC PAS 62255-1-2001 |
高比特率数字接入电信网络用多对电缆.户外电缆 |
(Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor Cables) |
BS DD IEC TS 60034-17-2002 |
旋转电机.变频供电的笼型感应电动机.应用导则 |
(Rotating electrical machines - Cage induction motors when fed from converters - Application guide) |
BS DD IEC TS 60034-20-1-2002 |
旋转电机.控制电动机.步进电动机 |
(Rotating electrical machines - Control motors - Stepping motors) |
BS DD IEC TS 60034-26-2002 |
旋转电机.非平衡电压对三相感应电动机性能的影响 |
(Rotating electrical machines - Effects of unbalanced voltages on the performance of three-phase induction motors) |
BS DD IEC TS 60695-11-3-2004 |
着火危险试验.试验火焰.500W火焰.设备和验证试验方法 |
|
BS DD IEC TS 60695-11-4-2004 |
着火危险试验.试验火焰.50W火焰.设备和验证试验方法 |
|
BS DD IEC TS 60695-11-40-2003 |
着火危险试验.着火试验.认可试验.指南 |
(Fire hazard testing - Test flames - Confirmatory tests - Guidance) |
BS DD IEC TS 60695-2-20-2004 |
着火危险试验.基于灼热/发热丝的试验方法.热丝圈可点火性.设备、试验方法和指南 |
|
BS DD IEC TS 60695-2-20-2004 |
着火危险试验.基于灼热/发热丝的试验方法.热丝圈可点火性.设备、试验方法和指南 |
|
BS DD IEC TS 60695-7-3-2004 |
着火危险试验.火灾废物的毒性.试验结果的使用和解释 |
|
BS DD IEC TS 60695-7-3-2004 |
着火危险试验.火灾废物的毒性 |
|
BS DD IEC TS 60695-7-51-2002 |
着火危险试验.着火流出物的毒性.毒性的估算.试验结果的计算和解释 |
(Fire hazard testing - Toxicity of fire effluent - Estimation of toxic potency - Calculation and interpretation of test results) |
BS DD IEC TS 60870-6-602-2002 |
远动设备和系统.与ISO标准和ITU-T建议兼容的远动协议.TASE传输轮廓 |
(Telecontrol equipment and systems - Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE transport profiles) |
BS DD IEC TS 61000-1-2-2002 |
电磁兼容性(EMC).总则.获得电气和电子设备电磁现象达到功能安全的方法论 |
(Electromagnetic compatibility (EMC) - General - Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena) |
BS DD IEC TS 61334-5-3-2002 |
采用配电线载波系统的配电自动化.低层文件集.扩展型光谱适配性宽带(SS-AW)文件集 |
(Distribution automation using distribution line carrier systems - Lower layer profiles - Spread spectrum adaptive wideband (SS-AW) profile) |
BS DD IEC TS 61334-5-4-2002 |
使用配线载波系统的分配自动化.低层轮廓.多载波调制(MCM)轮廓 |
(Distribution automation using distribution line carrier systems - Lower layer profiles - Multi-carrier modulation (MCM) profile) |
BS DD IEC TS 61334-5-5-2002 |
使用配线载波系统的分配自动化.低层轮廓.扩展谱带快速跳频(SS-FFH)轮廓 |
(Distribution automation using distribution line carrier systems - Lower layer profiles - Spread spectrum-fast frequency hopping (SS-FFH) profile) |
BS DD IEC TS 61370-2002 |
蒸汽涡轮机.蒸汽纯度 |
(Steam turbines - Steam purity) |
BS DD IEC TS 61400-13-2002 |
机械载荷测量 |
(Measurement of mechanical loads) |
BS DD IEC TS 61400-23-2002 |
转式叶片全尺寸结构试验 |
(Full-scale structural testing of rotor blades) |
BS DD IEC TS 61804-1-2004 |
过程控制的功能块.系统方面的概要 |
|
BS DD IEC TS 61850-2-2003 |
变电所的通信网络和系统.术语汇编 |
(Communication networks and systems in substations - Glossary) |
BS DD IEC TS 61968-2-2004 |
电设施应用集成.分布管理用系统接口.术语汇编 |
|
BS DD IEC TS 61994-1-2003 |
频率控制和选择用压电和介电器件.术语汇编.压电和介电谐振器 |
(Piezoelectric and dielectric devices for frequency control and selection - Glossary - Piezoelectric and dielectric resonators) |
BS DD IEC TS 61994-4-2-2004 |
频率控制和选择用压电和介电器件.术语汇编.压电和介电材料.压电陶瓷 |
|
BS DD IEC TS 61994-4-2-2004 |
频率控制和选择用压电和介电器件.术语汇编.压电和介电材料.压电陶瓷 |
|
BS DD IEC TS 62091-2003 |
低压开关设备和控制设备.固定式消防泵驱动器用控制器 |
(Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps) |
BS DD IEC TS 62143-2003 |
飞机场的照明和照明标志的电气装置.航空地面照明系统.安全生命周期法的开发指南 |
(Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology) |
BS DD IEC TS 62239-2003 |
航空电子设备的过程管理.电子件管理计划的制定 |
(Process management for avionics - Preparation of an electronic components management plan) |
BS DD IEC TS 62282-1-2005 |
燃料电池工艺学.术语 |
|
BS DD IEC TS 62370-2004 |
电声学.声强测量仪器.电磁和静电兼容性要求和试验规程 |
|
BS DD IEC/PAS 60044-5-2002 |
仪表用变压器.电容器变压器 |
(Instrument transformers - Capacitor voltage transformers) |
BS DD IEC/PAS 61162-100-2002 |
海上导航和无线电通信设备及系统的数字接口.单人讲话和多人收听.UAIS对IEC 61162-1的额外要求 |
(Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Single talker and multiple listeners - Extra requirements to IEC 61162-1 for the UAIS) |
BS DD IEC/PAS 61162-102-2004 |
海上导航和无线电通信设备及系统.数字接口.单通话器和多受话器.航海数据记录器对IEC 61162-1的额外要求 |
|
BS DD IEC/PAS 61280-2-10-2003 |
纤维光学通信子系统试验程序.数字系统.激光发射机的时间分辨线性调频脉冲和α因数测量 |
(Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters) |
BS DD IEC/PAS 61300-3-29-2002 |
光纤互连器械和备用件.基本试验和测量程序.检验和测量.DWDM零件光谱传输功能射程特性的测量技术 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Measurement techniques for characterizing the amplitude of the spec) |
BS DD IEC/PAS 61300-3-35-2002 |
光纤互连器件和无源件.基本试验和测量程序.检验和测量.光纤柱形连接器的目视检测 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Fibre optic cylindrical connector endface visual inspection) |
BS DD IEC/PAS 61499-4-2002 |
工业过程测量和控制系统用功能器件.符合标杆规则 |
(Function blocks for industrial-process measurement and control systems - Rules for compliance profiles) |
BS DD IEC/PAS 62260-2001 |
用反离散傅里叶变换法(IDFT)测定频域中脉冲/阶跃回程损耗 |
(Pulse/step return loss from measurement in the frequency domain using the inverse discrete fourier transformation (IDFT)) |
BS DD IEC/PAS 62338-2003 |
屏蔽对称电缆.用三线法测量连接衰减 |
(Screened balanced cables - Coupling attenuation measurement, triaxial method) |
BS DD ISO 709-2001 |
香精油.测定酯化值 |
(Essential oils - Determination of ester value) |
BS DD ISO/PAS 11856-2003 |
铺地织物.纤维捆绑物测定的试验方法 |
(Textile floor coverings - Test methods for the determination of fibre bind) |
BS DD ISO/TR 15235-2001 |
涂料和有关产品使用前的钢衬底制备.水溶盐污染物等级效应的采集信息 |
(Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination) |
BS DD ISO/TR 15969-2001 |
表面化学分析.深度剖面.溅涂深度的测量 |
(Surface chemical analysis - Depth profiling - Measurement of sputtered depth) |
BS DD ISO/TR 16144-2002 |
液压传动.液体粒子自动计算器的校验.SRM 2806 标准物质认证的使用程序 |
(Hydraulic fluid power - Calibration of liquid automatic particle counters - Procedures used to certify the standard reference material SRM 2806) |
BS DD ISO/TS 11155-2-2002 |
道路车辆.乘客舱内空气过滤器.气体过滤试验 |
(Road vehicles - Air filters for passenger compartments - Test for gaseous filtration) |
BS DD ISO/TS 11725-2002 |
固体矿物燃料.测定氮.微量气化法 |
(Solid mineral fuels - Determination of nitrogen - Semi-micro gasification method) |
BS DD ISO/TS 12902-2002 |
固体矿物燃料.碳、氢和氮的总含量的测定.仪器分析法 |
(Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods) |
BS DD ISO/TS 13474-2003 |
声学.环境噪声评估用脉冲声音传播 |
(Acoustics - Impulse sound propagation for environmental noise assessment) |
BS DD ISO/TS 13762-2002 |
粒径分析.小角度X射线散射法 |
(Particle size analysis - Small angle X-ray scattering method) |
BS DD ISO/TS 15666-2003 |
声学.用社会和社会声学测量法评定噪声干扰 |
(Acoustics - Assessment of noise annoyance by means of social and socio-acoustic surveys) |
BS DD ISO/TS 16628-2003 |
气管支气管导管.尺寸指定和标示的推荐方法 |
(Tracheobronchial tubes - Recommendations for size designation and labelling) |
BS DD ISO/TS 16668-2001 |
基本语义寄存器(BSR) |
(Basic semantics register (BSR)) |
BS DD ISO/TS 17090-1-2002 |
保健信息学.公开密钥的基础设施.构架和纵览 |
(Health informatics - Public key infrastructure - Framework and overview) |
BS DD ISO/TS 17090-2-2002 |
保健信息学.公开密钥的基础设施.合格证书文件 |
(Health informatics - Public key infrastructure - Certificate profile) |
BS DD ISO/TS 17090-3-2002 |
保健信息学.公开密钥的基础设施.认证管理机构的政策管理 |
(Health informatics - Public key infrastructure - Policy management of certification authority) |
BS DD ISO/TS 17117-2002 |
保健信息学.可控保健术语.结构和高水平指示仪 |
(Health informatics - Controlled health terminology - Structure and high-level indicators) |
BS DD ISO/TS 17450-2-2004 |
产品几何量技术规范.一般概念.基本原则、规范、操作者和不确定度 |
|
BS DD ISO/TS 17450-2-2004 |
产品几何量技术规范.一般概念.基本原则、规范、操作者和不确定度 |
|
BS DD ISO/TS 17764-1-2002 |
动物饲料.脂肪酸含量的测定.甲酯的制备 |
(Animal feeding stuffs - Determination of the content of fatty acids - Preparation of methyl esters) |
BS DD ISO/TS 18308-2004 |
医疗信息学.电子医疗记录结构要求 |
|
BS DD ISO/TS 18835-2004 |
吸入麻醉系统.蒸馏汽化器及相关设备 |
|
BS DD ISO/TS 21667-2004 |
医疗健康信息学.健康指示器概念框架 |
|
BS DD ISO/TS 21748-2004 |
测量不确定度评估的重复性、再现性和准确度评估的使用指南 |
|
BS DD ISO/TS 22559-1-2004 |
升降机(电梯)的安全要求.升降机(电梯)全球安全要求(GESRs) |
|
BS DD ISO/TS 22559-1-2004 |
升降机(电梯)的安全要求.升降机(电梯)全球安全要求(GESRs) |
|
BS DD ISO/TS 23081-1-2004 |
信息和文献工作.记录管理过程.记录用数据.原则 |
|
BS DD ISO/TS 3632-1-2003 |
藏红花.规范 |
(Saffron (Crocus sativus L.) - Specification) |
BS DD ISO/TS 3632-2-2003 |
藏红花.试验方法 |
(Saffron (Crocus sativus L.) - Test methods) |
BS E9007-1975 |
电子器件质量评定协调体系规范.基本规范.计数检验的取样计划及过程 |
(Specification for harmonized system of quality assessment for electronic components: Basic specification: Sampling plans and procedures for inspection by attributes) |
BS E9063-1976 |
电子器件质量评定协调体系规范.空白详细规范.工业用加热三极管 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: industrial heating triodes) |
BS E9065-1976 |
电子器件质量评定协调体系规范.空白详细规范.阳极消耗小于1kW的小功率发射管 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: small power transmitting tubes of anode dissipation up to 1 kW) |
BS E9372-1976 |
电子器件质量评定协调体系规范.空白详细规范.低频与高频放大用限制环境的双极晶体管 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: ambient-rated bipolar transistors for low and high frequency amplification) |
BS E9375-1975 |
电子器件质量评定协调体系规范.空白详细规范.除精密电压温度补偿标准二极管之外的调压二极管 |
(Specification - Harmonized system of quality assessment for electronic components - Blank detail specification: voltage regulator diodes and voltage reference diodes excluding precision-voltage temper) |
BS EN 1-1998 |
带有蒸气燃烧器的燃油炉 |
(Flued oil stoves with vaporizing burners) |
BS EN 10001-1991 |
生铁的定义和分类 |
(Definition and classification of pig-irons) |
BS EN 100012-1996 |
电子器件的质量评估系统一致性.基础规范.X射线检验电子件 |
(Harmonized system of quality assessment for electronic components - Basic specification - X-ray inspection of electronic components) |
BS EN 100014-1988 |
电子器件质量评定协调体系.基础规范:CECC评估处理的一般程序(60%置信限) |
(Harmonized system of quality assessment for electronic components - Basic specification: CECC assessed process average procedure (60% confidence limit)) |
BS EN 100015-2-1994 |
基本规范.静电灵敏度装置的维护.低湿度条件的要求 |
(Basic specification - Protection of electrostatic sensitive devices - Requirements for low humidity conditions) |
BS EN 100015-3-1994 |
基本规范:静电灵敏装置的维护.无菌室地区的要求 |
(Basic specification - Protection of electrostatic sensitive devices - Requirements for clean room areas) |
BS EN 100015-4-1994 |
基本规范:静电灵敏度装置的维护.高压环境的要求 |
(Basic specification - Protection of electrostatic sensitive devices - Requirements for high voltage environments) |
BS EN 10002-1-2001 |
金属材料的拉伸试验.常温试验方法 |
(Tensile testing of metallic materials - Method of test at ambient temperature) |
BS EN 10002-5-1992 |
金属材料拉伸试验.第5部分:高温试验方法 |
(Tensile testing of metallic materials - Method of test at elevated temperatures) |
BS EN 100114-1-1997 |
程序规则.质量认证程序.第1部分:生产厂家及其它机构的认可 |
(Rule of Procedure 14 - Quality assessment procedures - CECC requirements for the approval of an organization) |
BS EN 100114-6-1997 |
程序规则.质量认证程序.第6部分:电子件生产厂家的技术认可 |
(CECC Quality assessment procedure for electronic components - Technology approval of electronic component manufacturers) |
BS EN 10016-1-1995 |
拉拔和/或冷轧用非合金钢棒.一般要求 |
(Non-alloy steel rods for drawing and/or cold rolling - General requirements) |
BS EN 10016-2-1995 |
拉拔和/或冷轧用非合金钢棒.一般用途钢棒的专门要求 |
(Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for general purpose rod) |
BS EN 10016-3-1995 |
拉拔和/或冷轧用非合金钢棒.沸腾和沸腾代用低碳钢棒的特殊要求 |
(Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for rimmed and rimmed substitute low carbon steel rod) |
BS EN 10016-4-1995 |
拉制和/或冷滚轧非合金钢棒材.专用棒材的特殊要求 |
(Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for rod for special applications) |
BS EN 10017-2004 |
拉制和/或冷轧制钢棒.尺寸和公差 |
|
BS EN 10017-2004 |
拉制和/或冷轧制钢棒.尺寸和公差 |
|
BS EN 10021-1993 |
钢铁制品的一般交货技术条件 |
(General technical delivery requirements for steel and iron products) |
BS EN 10024-1995 |
斜缘工字型热轧钢.形状和尺寸公差 |
(Hot rolled taper flange I sections - Tolerances on shape and dimensions) |
BS EN 10025-1-2004 |
结构钢热轧制品.一般交货技术条件 |
|
BS EN 10025-1993 |
非合金结构钢热轧制品.交货技术条件 |
(Hot rolled products of non-alloy structural steels - Technical delivery conditions) |