标准号 |
中文名称 |
英文名称 |
BS EN ISP 12061-9-1995 |
信息技术.开放系统互连.国际标准化轮廓.开放系统互连分配交易进程.第9部分:支持供应商链式事务处理.偏振控 |
(Information technology - Open systems interconnection - International standardized profiles: OSI distributed transaction procesing - Provider supported chained transactions - Polarized control (ATP31)) |
BS EN ISP 12062-1-1996 |
国际技术.国际标准化提问档AMH2n.信息处理系统.人际通信.IPM MHS服务支持 |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. IPM MHS Service Support) |
BS EN ISP 12062-2-1996 |
国际标准技术.AMH2n外观的国际标准.信息处理系统.IMH2-IPM目录 |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. AMH2-IPM Content) |
BS EN ISP 12062-3-1996 |
国际技术.国际标准化提问档AMH2n.信息处理系统.全球信息.IMH22-IPM的信息传递要求(P1) |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. AMH22-IPM Requirements for Message Transfer (P1)) |
BS EN ISP 12062-4-1996 |
国际技术.国际标准化提问档AMH2n.信息处理系统.全球信息.MTS存取信息的AMH23-IPM要求(P3) |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. AMH23-IPM Requirements for MTS Access (P3)) |
BS EN ISP 12062-5-1996 |
国际技术.国际标准化提问档AMH2n.信息处理系统.全球信息.增强MS存取信息的AMH24-IPM要求(P7) |
(International technology. International Standardized Profiles AMH2n. Message Handling Systems. Interpersonal Messaging. AMH24 IPM Requirements for Enhanced MS Access (P7)) |
BS EN ISP 12064-1-1998 |
信息技术.国际标准化提问档FOD112.开式文档结构:图像应用.简单的文档结构.光栅图形内容结构.文档应用界面(D |
(Information technology - International standardized profile FOD112 - Open document format: image applications - Simple document structure - Raster graphics content architecture - Document application) |
BS EN ISP 12068-1-1997 |
信息技术.国际标准化提问档FDI 4.目录服务的数据定义.使用由OSI传输作用处理的目录服务.第1部分:FD1 41 简 |
(Information technology - International standardized profile FDI 4. Directory data definitions - Use of the directory for OSI TP - FDI 41 - Basic naming and addressing) |
BS EN ISP 12068-2-1997 |
信息技术.FD4国际界面标准.目录服务的数据定义.使用由OSI传输作用处理的目录服务.第2部分:FD1 42 扩展的命 |
(Information technology - International standardized profile FDI 4. Directory data definitions - Use of the directory for OSI TP - FDI 42 - Enhanced naming and addressing) |
BS EN ISP 12070-1-1997 |
信息技术.国际标准界面FCSnnn.ISO/IEC2022基础上8比特代码字符集.FCS111.2022选项1 |
(Information technology - International standardized profiles FCSnnn - Character set 8-bit code structure based on ISO/IEC 2022: FCS111 - 2022 Option 1) |
BS EN ISP 15124-1-1999 |
信息技术.国际标准类型FOD126.开放文件格式:图形应用.增强的文件结构.字符、光栅制图和几何制图目录结构.文 |
(Information technology - International standardized profile FOD126 - Open document format: image applications - Enhanced document structure - Character, raster graphics, and geometric graphics content) |
BS F 125-1973 |
橡胶粘合的压缩石棉纤维垫片规范 |
(Specification for rubber bonded compressed asbestos fibre jointing) |
BS F 130-1987 |
航空航天用橡胶粘合的压缩芳族聚酰胺纤维垫片规范 |
(Specification for rubber bonded compressed aramid fibre jointing material for aerospace purposes) |
BS F 131-1986 |
航空航天用涂氯磺化聚乙烯橡胶的尼龙织物 |
(300g/m(Specification for chlorosulphonated polyethylene rubber coated nylon fabric (300 g/m) |
BS F 133-1988 |
航空航天用经编尼龙织物规范 |
(Specification for warp knitted nylon fabric for aerospace purposes) |
BS F 136-1989 |
航空航天用涂着色氯磺化聚乙烯橡胶的尼龙织物(190g/m**2)规范 |
(Specification for pigmented chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m) |
BS F 137-1990 |
航空航天用透光用抛光经编棉布规范 |
(Specification for warp knitted cotton polishing and polish application cloths for aircraft transparencies) |
BS F 138-1991 |
航空用聚酯纤维平纹(亚麻)网规范 |
(Specification for polyester plain (bobbin) netting suitable for aerospace purposes) |
BS F 139-1989 |
航空航天用涂铝聚氯丁橡胶的尼龙织物(350g/m**2)规范 |
(Specification for aluminized polychloroprene rubber-coated nylon fabric (350 g/mUP2) for aerospace purposes) |
BS F 140-1991 |
降落伞术语集 |
(Glossary of parachute terms) |
BS F 141-1992 |
航空用机织棉纤维(L28和L34)规范 |
(Specification for closely woven cotton fabrics (L28 and L34) for aerospace purposes) |
BS F 143-1993 |
航空航天用对位芳族聚酰编织绳 |
(Specification for para-aramid braided cords for aerospace purposes) |
BS F 151-1991 |
航空用无梭织造棉网规范 |
(Specification for shuttleless woven cotton webbing for aerospace purposes) |
BS G 102-1971 |
旋转电机一般要求规范 |
(Specification for general requirements for rotating electrical machinery) |
BS G 118-1949 |
直读航空磁罗盘规范 |
(Specification for aircraft magnetic compass, direct-reading) |
BS G 122-1949 |
遥控读数(陀螺稳定的)的航空磁罗盘规范 |
(Specification for aircraft magnetic compass, remote-reading (gyro-stabilized)) |
BS G 123-1949 |
遥控读数(非稳定的)的航空磁罗盘规范 |
(Specification for aircraft magnetic compass, remote-reading (non-stabilized)) |
BS G 125-1950 |
航空用转弯侧倾斜指示仪规范 |
(Specification for turn and slip indicators for aircraft purposes) |
BS G 133-1951 |
极电压航空系统用电磁指示仪规范 |
(Specification for electro-magnetic indicators for extra low voltage aircraft systems) |
BS G 142-1953 |
航空超低电压直流系统用重负载电磁驱动的单极断路器规范 |
(Specification for heavy duty, electro-magnetically operated, single-pole circuit-breakers for extra-low voltage d.c. systems in aircraft) |
BS G 152-1956 |
航空用交流电操作人工地平仪规范 |
(Specification for a.c. electrically-operated artificial horizons for aircraft) |
BS G 174-1959 |
航空用二次供电用换流器 |
(Invertors for secondary electrical supplies for aircraft) |
BS G 175-1959 |
航空燃油嘴接地插头和插座 |
(Aircraft fuel nozzle grounding plugs and sockets) |
BS G 176-1-1960 |
航空用管状熔丝规范.第1部分:一般要求 |
(Specification for cartridge fuses for aircraft - General requirements) |
BS G 176-2-1960 |
航空用管状熔丝规范.第2部分:管形熔丝和熔断片(A型) |
(Specification for cartridge fuses for aircraft - Cartridge fuses and fuse-links (Type A)) |
BS G 176-3-1961 |
航空用管状熔丝规范.第3部分:管状熔断片(B型) |
(Specification for cartridge fuses for aircraft - Cartridge fuse-links (Type B)) |
BS G 176-4-1962 |
航空用管状熔丝规范.第4部分:管状熔断片(C型) |
(Specification for cartridge fuses for aircraft - Cartridge fuse-links (Type C)) |
BS G 176-5-1966 |
航空用管状熔丝规范.第5部分:管状熔断片(D型) |
(Specification for cartridge fuses for aircraft - Cartridge fuse-links (Type D)) |
BS G 177-1961 |
航空用Nyvin 型电缆规范 |
(Specification for Nyvin type electrical cables for aircraft) |
BS G 183-1963 |
飞行器中模拟数据传输系统相互连接规范 |
(Specification for interconnections in analogue data transmission systems in aircraft) |
BS G 184 to G 188-1964 |
六角形压合飞行器铝制电缆用铝接线板端和线内连接器规范 |
(Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables) |
BS G 189-1964 |
航空用Tersil型电缆规范 |
(Specification for Tersil type electrical cables for aircraft) |
BS G 190-1964 |
航空用座舱高度表规范 |
(Specification for cabin altimeters for aircraft) |
BS G 192-1965 |
航空用铜导线的Efglas型电缆规范 |
(Specification for Efglas type electric cables with copper conductors for aircraft) |
BS G 193-1966 |
飞行器灯座规范 |
(Specification for aircraft lampholders) |
BS G 195-1966 |
飞行器用Minyvin型电缆规范 |
(Specification for Minyvin type electric cables for aircraft) |
BS G 198-5-1997 |
航空电缆和设备电线用套.热收缩模型规范 |
(Sleeves for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes) |
BS G 203-1967 |
带系紧衬片和锁紧垫圈的统一螺钉规范 |
(Specification for Unified screws with captive facing and locking washers) |
BS G 207-1969 |
飞行器电气线路图规范 |
(Specification for aircraft electrical circuit diagrams) |
BS G 208-1970 |
额定值达到10A的电气继电器一般要求规范 |
(Specification for general requirements for electrical relays up to 10 A rating) |
BS G 209-1970 |
变压整流部件规范 |
(Specification for transformer rectifier units) |
BS G 211-1971 |
铜导线的Fepsil型电缆规范 |
(Specification for reflection-reducing coating of instrument windows and lighting wedges) |
BS G 212-1971 |
声学.测量由计算机和办公装置发出的高频噪声 |
(Specification for general requirements for aircraft electrical cables) |
BS G 217-1975 |
座舱照明控制器的一般要求规范 |
(Specification for general requirements for cockpit lighting controllers) |
BS G 222-1976 |
Efglas型电缆规范(米制部件) |
Specification for Efglas type electric cables (metric units) |
BS G 224-1978 |
航空用杠杆式的手控开关规范 |
Specification for lever-operated manual switches for aircraft |
BS G 225-1979 |
带可移动压合型触点的耐环境影响的终端连接组件的性能规范 |
Specification for performance of environment-resistant terminal junction modules with removable crimp-type contacts |
BS G 226-1979 |
计数器和指针式伺服型压力高度计系统规范 |
Specification for counter and pointer, servo type, pressure altimeter systems |
BS G 227-1979 |
Tersil型电缆规范(米制件) |
Specification for Tersil type electric cables (metric units) |
BS G 228-1981 |
飞行器用两极和四极密封的2A和3A电磁继电器的间隙和固定尺寸规范 |
Specification for clearance and fixing dimensions for 2 A and 3 A, two- and four-pole sealed electromagnetic relays for aircraft |
BS G 234-1984 |
飞行器上使用的自调式气流角度发射机规范 |
Specification for self-aligning air flow angle transmitters for use on aircraft |
BS G 235-1987 |
一般机体或设备连接用带镀银导体的150℃捆扎绝缘电缆规范 |
Specification for electric cables for general airframe or equipment interconnect use (150 鳦), wrapped insulation with silver plated conductors |
BS G 236-1987 |
一般机体或设备连接用带镀镍导体的200℃捆扎绝缘电缆规范 |
Specification for electric cables for general airframe or equipment interconnect use (200 鳦), wrapped insulation with nickel plated conductors |
BS G 237-1987 |
一般机体或设备连接用带镀镍导体的200℃挤制绝缘电缆规范 |
Specification for electric cables for general airframe or equipment interconnect use (200 鳦), extruded insulation with nickel plated conductors |
BS G 240-1988 |
飞行器用压力传感器规范 |
Specification for pressure transducers for use on aircraft |
BS G 241-1988 |
发动机防火区和机体用耐火电缆规范 |
Specification for fire proof electric cables for engine fire zone and airframe use |
BS G 242-1989 |
数据总线连接系统规范 |
Specification for data bus interconnecting systems |
BS G 243-1990 |
发动机用点火电缆规范(4kV直流) |
Specification for igniter cables for engine use (4 kV d.c.) |
BS G 244-1989 |
飞行器电连接系统装配/检修实用规程 |
Code of practice for installation/repair of aircraft electrical interconnection systems |
BS G 246-1991 |
在控制拉力下飞行器电缆上用电缆带规范 |
Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses |
BS G 247-1-1992 |
飞行器定位灯.救生衣灯规范 |
Locator lights for airborne applications - Specification for lifejacket lights |
BS G 247-2-1995 |
航空用定位灯.救生筏灯规范 |
Locator lights for airborne applications - Specification for liferaft lights |
BS G 248-1993 |
混合远程功率控制器规范.一般要求 |
Specification for hybrid remote power controllers - General requirements |
BS G 249-1993 |
固态遥控功率控制器通用要求 |
(Specification for solid-state remote power controllers - General requirements) |
BS G 250-1994 |
电缆的识别标记规范 |
(Specification for identification marking of electric cables) |
BS G 253-1995 |
一型终端连接系统规范 |
(Specification for type 1 terminal junction systems) |
BS G 254-1994 |
2型终端连接系统规范 |
Specification for type 2 terminal junction systems |
BS G 255-1994 |
3型终端连接系统规范 |
Specification for type 3 terminal junction systems |
BS G 256-1995 |
4型终端连接系统规范 |
Specification for type 4 terminal junction systems |
BS G 257-1-1998 |
民用飞行器的电磁危害防护设计.理论及危害性导则 |
Design of electromagnetic hazard protection of civil aircraft - Guide to theory and threats |
BS G 257-2-1998 |
民用飞行器的电磁危害防护设计.防护导则 |
Design of electromagnetic hazard protection of civil aircraft - Guide to protection |
BS G 257-3-2004 |
民用飞行器的电磁危害防护设计.间隙和检验指南 |
|
BS G 258-1995 |
电缆和电缆线术语汇编 |
Glossary of terms for electrical cables and cable harnesses |
BS G 259-1996 |
飞行器设备.空运设备所需环境和操作条件.湿度、温度和压力试验 |
(Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests) |
BS G 260-1996 |
飞行器设备的环境试验.静态加速度 |
Environmental tests for aircraft equipment - Steady-state acceleration |
BS G 261-1-1996 |
小型飞机规范.电磁继电器和接触器.第1部分:一般要求 |
Specification for aircraft - Electromagnetic relays and contactors - General requirements |
BS G 262-1998 |
空间飞行器.空间飞行器设备的设计和性能说明.标准型 |
Aircraft - Declaration of design and performance for aircraft equipment - Standard form |
BS G 264-2005 |
航空航天系列.航空电子数据传输接口系统规范.辅助总线 |
|
BS HC 1-1973 |
碳素钢铸件(500N/mm**2)规范 |
Specification for carbon steel castings (500 N/mm) |
BS HC 10-1974 |
镍-铬-钼-钢铸件(1150-1300MPa)规范 |
Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa) |
BS HC 100-1972 |
铁、镍、铜、钴和难熔金属基合金铸件的检验和试验程序 |
Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings |
BS HC 103-1974 |
23%铬-镍-钨耐腐蚀钢铸件(铬23、镍11、钨3)规范 |
Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3) |
BS HC 104-1974 |
19%铬-10%镍铌稳定的耐腐蚀钢铸件(460MPa)规范 |
Specification for 19% chromium-10% nickel niobium-stabilized corrosion-resisting steel castings (460 MPa) |
BS HC 105-1974 |
18%铬-11%镍-2.5%钼铌稳定的耐腐蚀钢铸件(500MPa)规范 |
Specification for 18% chromium-11% nickel-2.5% molybdenum niobium-stabilized corrosion-resisting steel castings (500 MPa) |
BS HC 106-1974 |
沉淀硬化铬-镍-铜耐腐蚀钢铸件(1250-1500MPa)(铬16、镍4、铜3)规范 |
Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3) |
BS HC 2-1973 |
碳锰钢铸件(550N/mm**2)规范 |
(Specification for carbon-manganese steel castings (550 N/mm) |
BS HC 202-1973 |
沉淀硬化镍基铬-铌-钼-铁-钨合金铸件规范(铬20.0、铌6.6、钼6.0、铁3.0、钨2.5) |
Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5) |
BS HC 205-1974 |
沉淀硬化镍基铬-钴-钼-钛合金铸件规范(铬20、钴20、钼6、钛2 |
Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2) |
BS HC 206-1975 |
沉淀硬化镍基铬-钴-钼-钛合金精密铸件规范(铬20、钴20、钼6、钛2) |
Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2) |
BS HC 3-1973 |
1%铬钼低合金钢铸件(700N/mm**2)规范 |
Specification for 1% chromium-molybdenum low alloy steel castings (700 N/mm) |
BS HC 301-1973 |
钴基铬-镍-钨合金铸件规范(铬25.5、镍10.5、钨7.5) |
Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5) |
BS HC 4-1973 |
3%铬钼钢铸件(620-770N/mm**2)规范 |
Specification for 3% chromium-molybdenum steel castings (620-770 N/mm) |
BS HC 401-1974 |
18%镍马氏体时效处理钢精密铸件规范(1600-1850MPa) |
Specification for 18% nickel maraging steel precision castings (1600-1850 MPa) |
BS HC 402-1976 |
铸铁圆筒形件规范(离心铸造)(适用于直径小于和等于200mm的活塞环) |
Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter) |
BS HC 403-1976 |
高铬合金铸件铁圆筒形件规范(离心铸造)(适用于直径小于和等于400mm的活塞环) |
Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter) |
BS HC 404-1976 |
铬-钼合金铸件铁圆筒形件(适用于离心铸造和砂型铸造密封环、活塞环和汽缸套筒) |
Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners) |
BS HC 5-1973 |
3%镍表面淬火钢铸件(700N/mm**2)规范 |
Specification for 3% nickel case hardening steel castings (700 N/mm) |
BS HC 502-1981 |
铜基铝-镍-铁合金铸件规范(620MPa)(铝9.5、镍5、铁5) |
Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5) |
BS HC 6-1973 |
3%铬钼渗氮钢铸件(850-1000N/mm**2)规范 |
Specification for 3% chromium-molybdenum nitriding steel castings (850-1000 N/mm) |
BS HC 7-1974 |
3%铬钼钢铸件(880-1080MPa)规范 |
Specification for 3% chromium-molybdenum steel castings (880-1080 MPa) |
BS HC 8-1974 |
3%铬钼钢铸件(1150-1300MPa)规范 |
Specification for 3% chromium-molybdenum steel castings (1150-1300 MPa) |
BS HC 9-1974 |
镍-铬-钼-钢铸件(880-1080MPa)规范 |
Specification for nickel-chromium-molybdenum steel castings (880-1080 MPa) |
BS HR 10-1972 |
镍-钴-铬-钼-钛-铝耐合金坯锭、棒材、锻件和部件(镍基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)规范 |
Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
BS HR 203-1972 |
镍-铬-钛耐热合金薄板材、薄板材和带材(镍基、Cr19.5、Ti0.4)规范 |
Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4) |
BS HR 204-1972 |
镍-铬-铁-钼-钴-钨耐热合金板材,薄板材和带材(镍基、Cr22、Fe18.5、Mo9、Co1.5、W0.6)规范 |
Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
BS HR 205-1989 |
镍铜合金薄板材和带材:退火的(镍基、Cu31)规范 |
Nickel-copper alloy sheet and strip: annealed (Nickel base, Cu 31) |
BS HR 206-1973 |
镍-钴-铬-钼-钛-铝耐热合金板材、薄板材和带材(镍基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)规范 |
Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
BS HR 207-1973 |
镍-铁-铬-钼-铝-钛耐热合金板材、薄板材和带材(Ni/Co43.5、Cr16.5、Mo3.3、Al1.2、Ti1.2、Fe余量)规范 |
Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) |
BS HR 208-1989 |
镍铬铁合金薄板材、带材和板材规范:退火的(镍基、Cr15.5、Fe8) |
Specification for nickel-chromium-iron alloy sheet, strip and plate: annealed (Nickel base, Cr 15.5, Fe 8) |
BS HR 209-1989 |
镍-铬-钴-钼-钛-铝耐热合金薄板材、带材和板材:软化的(镍基、Cr18、Co14、 Mo7、Ti2.2、Al2.1)规范 |
Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1) |