标准号 |
中文名称 |
英文名称 |
BS 4311-3-1993 |
量块和附件规范.第3部分:使用中的量块 |
(Specification for gauge blocks and accessories - Gauge blocks in use) |
BS 4313-1988 |
涂料用铬酸锶颜料规范 |
(Specification for strontium chromate pigments for paints) |
BS 4314-1-1968 |
气体物理分析装置规范.第1部分:工业用红外线气体分析器 |
Specification for apparatus for physical methods of gas analysis - Infra-red gas analysers for industrial use |
BS 4315-2-1970 |
耐透气性和耐透水性的试验方法.第2部分:渗透性墙结构(透水) |
Methods of test for resistance to air and water penetration - Permeable walling constructions (water penetration) |
BS 4316-1968 |
红细胞压积测量器具规范 |
Specification for apparatus for measurement of packed red cell volume |
BS 4317-1-1980 |
谷类作物和豆科作物的试验方法.第1部分:干粒重量的测定 |
(Methods of test for cereals and pulses - Determination of the mass of 1000 grains) |
BS 4317-10-1993 |
谷类和豆类试验方法.第10部分:谷类和磨碎谷类产品灰分测定 |
(Methods of test for cereals and pulses - Determination of ash of cereals and milled cereal products) |
BS 4317-11-1976 |
谷类作物和豆科作物的试验方法.第11部分:豆科作物中配糖氢氰酸含量的测定 |
(Methods of test for cereals and pulses - Determination of glycosidic hydrocyanic acid in pulses) |
BS 4317-12-1980 |
谷类作物和豆科作物的试验方法.第12部分:小麦粉中湿谷蛋白的测定 |
(Methods of test for cereals and pulses - Determination of wet gluten in wheat flour) |
BS 4317-13-1993 |
谷类作物和豆科作物的试验方法.第13部分:小麦沉淀指数的测定(译伦尼试验) |
Methods of test for cereals and pulses - Determination of sedimentation index for wheat (Zeleny test) |
BS 4317-15-1981 |
谷类作物和豆科作物的试验方法.第15部分:玉米(粉碎的和整粒的)含水量的测定 |
Methods of test for cereals and pulses - Determination of moisture content of maize (milled and whole) |
BS 4317-16-1981 |
谷类作物和豆科作物的试验方法.第16部分:小麦粉中干谷蛋白含量的测定 |
Methods of test for cereals and pulses - Determination of dry gluten in wheat flour |
BS 4317-18-1988 |
谷类作物和豆科作物的试验方法.第18部分:潜在虫害的测定 |
Methods of test for cereals and pulses - Determination of hidden insect infestation |
BS 4317-19-1990 |
谷类作物和豆科作物的试验方法.十二烷基硫酸钠(SDS)试验法测定小麦蛋白质质量 |
(Methods of test for cereals and pulses - Determination of protein quality of wheat by the sodium dodecyl sulphate (SDS) test) |
BS 4317-1990 |
谷类作物和豆科作物的试验方法.第19部分:小麦蛋白质质量的十二烷基硫酸钠(SDS)试验测定法 |
Methods of test for cereals and pulses. Determination of protein quality of wheat by the sodium dodecyl sulphate (SDS) test |
BS 4317-2-1987 |
谷类作物和豆科作物的试验方法.第2部分:谷类作物和谷物产品水份含量的测定(比较法) |
(Methods of test for cereals and pulses - Determination of moisture content of cereals and cereal products (reference method)) |
BS 4317-20-1999 |
谷物和豆类的试验方法.用淀粉测定记录仪测定面粉的吸水性和生面团的流变性能 |
Methods of test for cereals and pulses - Determination of water absorption of flour and rheological properties of doughs using a farinograph |
BS 4317-21-1999 |
谷物和豆类的试验方法.用伸长记录测定仪测定生面团的流变性能 |
Methods of test for cereals and pulses - Determination of rheological properties of doughs using an extensograph |
BS 4317-22-1989 |
谷物和豆类的试验方法.第22部分:使用稠度记录测定仪测定面粉吸水性和生面团的流变性 |
(Methods of test for cereals and pulses - Determination of water absorption of flour and rheological properties of doughs using a valorigraph) |
BS 4317-24-1990 |
谷类作物和豆科作物的试验方法.第24部分:谷类作物用湿度计校准的检验方法 |
(Methods of test for cereals and pulses - Method of checking the calibration of moisture meters for cereals) |
BS 4317-25-1990 |
谷物和豆类的试验方法.第25部分:用机械手段测定小麦粉中面筋含量 |
Methods of test for cereals and pulses - Determination of wet gluten content in wheat flour by mechanical means |
BS 4317-26-1991 |
谷类作物和豆科的试验方法.第26部分:散装谷物储藏温度的测量 |
(Methods of test for cereals and pulses - Measurement of temperature of grain during bulk storage) |
BS 4317-28-1993 |
谷类作物和豆料作物的试验方法.第28部分:使用(淀粉)粘 力测量器测定面粉的粘性 |
(Methods of test for cereals and pulses - Determination of viscosity of flour using an amylograph) |
BS 4317-29-1993 |
谷类和豆类试验方法.第29部分:面粉和硬质小麦面粉中动物因素杂质的测定 |
(Methods of test for cereals and pulses - Determination of impurities of animal origin in wheat flour and durum wheat semolina) |
BS 4317-3-1999 |
谷类作物和豆类作物的试验方法.谷类作物和谷类产品水分含量的测定(例行参考法) |
(Methods of test for cereals and pulses - Determination of moisture content of cereals and cereal products (routine reference method)) |
BS 4317-30-1994 |
谷类和豆类试验方法.第30部分:通过电泳法对小麦品种进行鉴定 |
(Methods of test for cereals and pulses - Identification of wheat varieties by electrophoresis) |
BS 4317-31-1995 |
谷类作物和豆类作物的试验方法.硬粒小麦粉和粗粒粉中黄颜料含量的测定 |
(Methods of test for cereals and pulses - Determination of yellow pigment content in durum wheat flour and semolina) |
BS 4317-32-1996 |
谷类作用和豆类作物的试验方法.每百公升中谷类密度的试验方法 |
(Methods of test for cereals and pulses - Determination of bulk density of cereals, called ’mass per hectolitre’ (routine method)) |
BS 4317-4-1991 |
谷物和豆类的试验方法.第4部分:豆类中的杂质、粘度、外部气味、昆虫、种和变种的测定 |
(Methods of test for cereals and pulses - Determination of impurities, size, foreign odours, insects, and species and variety in pulses) |
BS 4317-9-1982 |
谷类作物和豆科作物的试验方法.第9部分:谷类作物脱落值的测定 |
(Methods of test for cereals and pulses - Determination of falling number of cereals) |
BS 4319-1-1968 |
电子管和电子阀(包括微波器件)电气特性的测量方法.测量等效输入和输出导纳的基本条件 |
(Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices) - Essential conditions for measuring equivalent input and output admittances) |
BS 4320-1968 |
一般工程用金属垫圈规范.米制系列 |
(Specification for metal washers for general engineering purposes - Metric series) |
BS 4322-1968 |
医院用车辆(如手推车)减震器推荐标准 |
(Recommendations for buffering on hospital vehicles such as trolleys) |
BS 4323-1979 |
自由蒸气引起的织物尺寸变化的测定方法 |
(Method for determination of dimensional change of fabrics induced by free steam) |
BS 4325-1-1978 |
油料种子残余物的分析方法.第1部分:水分及挥发物含量的测定 |
(Methods for analysis of oilseed residues - Determination of moisture and volatile matter content) |
BS 4325-12-1996 |
油料种子残余物的分析方法.使用高效液相色谱法对葡萄糖异硫氰酸盐含量的测定 |
(Methods for analysis of oilseed residues - Determination of glucosinolates content by high-performance liquid chromatography) |
BS 4325-14-2000 |
油料种子残留物的分析方法.油和水含量的测定.脉冲核磁共振分光测定法 |
(Methods for analysis of oilseed residues - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectroscopy) |
BS 4325-2-1978 |
油料种子残余物的分析方法.第2部分:总灰分的测定 |
(Methods for analysis of oilseed residues - Determination of total ash) |
BS 4325-3-1978 |
油料种子残余物的分析方法.第3部分:盐酸不溶灰分的测定 |
(Methods for analysis of oilseed residues - Determination of ash insoluble in hydrochloric acid) |
BS 4325-5-1978 |
油料种子残余物的分析方法.第5部分:二乙醚萃取物的测定 |
(Methods for analysis of oilseed residues - Determination of diethyl ether extract) |
BS 4325-6-1989 |
油料种子残余物的分析方法.第6部分:大豆产品中脲酶活性的测定 |
Methods for analysis of oilseed residues - Determination of urease activity of soya bean products |
BS 4325-9-1992 |
油种残留物分析方法.试样制备 |
Methods for analysis of oilseed residues - Preparation of test samples |
BS 4337-1968 |
手推托架搬运车的主要尺寸规范 |
(Specification for principal dimensions of hand-operated stillage trucks) |
BS 434-1-1984 |
铺路用乳化沥青(阳离子和阴离子型).第1部分:铺路用乳化沥青规范 |
(Bitumen road emulsions (anionic and cationic) - Specification for bitumen road emulsions) |
BS 434-2-1984 |
铺路用乳化沥青(阳离子和阴离子型).第2部分:铺路用乳化沥青的实用规程 |
(Bitumen road emulsions (anionic and cationic) - Code of practice for use of bitumen road emulsions) |
BS 4341 Addendum No. 1-1971 |
甲酸的试验方法 |
Methods of test for formic acid |
BS 4341-1968 |
甲酸的试验方法 |
(Methods of test for formic acid) |
BS 4344-1968 |
与天然和合成纤维绳索配合使用的滑轮组 |
(Pulley blocks for use with natural and synthetic fibre ropes) |
BS 4345-1968 |
带槽角铁规范 |
(Specification for slotted angles) |
BS 4357-1968 |
预制水磨石构件规范 |
(Specification for precast terrazzo units) |
BS 4358-1968 |
空气计量术语词汇(附有技术注释) |
(Glossary of terms used in air gauging with notes on the technique) |
BS 4359-1-1996 |
粉末比表面积的测定.第一部分:气体表面吸附(BET)推荐方法(包括多孔物质) |
(Determination of the specific surface area of powders - BET method of gas adsorption for solids (including porous materials)) |
BS 4359-2-1982 |
粉末比表面积的测定.第2部分:空气渗透气率方法 |
(Determination of the specific surface area of powders - Recommended air permeability methods) |
BS 4359-4-1995 |
粉末表面系数的测定.第4部分:使用气体表面吸附(BET)技术测定金属表面积的推荐方法 |
(Determination of the specific surface area of powders - Recommendations for methods of determination of metal surface area using gas adsorption techniques) |
BS 436-3-1986 |
直齿轮和斜齿轮.第3部分:金属渐开线齿轮的接触和齿根弯曲应力极限计算方法 |
(Spur and helical gears - Method for calculation of contact and root bending stress limitations for metallic involute gears) |
BS 436-4-1996 |
正齿圆柱齿轮和螺旋齿轮.齿轮啮合的对应齿根面的相应偏差的容许值和定义 |
(Spur and helical gears - Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth) |
BS 436-5-1997 |
齿轮和螺旋齿轮.齿轮啮合的对应齿根面的相应偏差的容许值和定义 |
(Spur and helical gears - Definitions and allowable values of deviations relevant to radial composite deviations and runout information) |
BS 4361-0-1990 |
木工机械.第0部分:木工机械和木工用辅助机械的分类 |
(Woodworking machines - Classification of woodworking machines and auxiliary machines used for woodworking) |
BS 4361-1-1968 |
木工机械.第1部分:部组件 |
(Woodworking machines - Components) |
BS 4361-10-1988 |
木工机械.第10部分:单面刨光用带组合铣刀的平面刨床规范 |
(Woodworking machines - Specification for surface planing machines with cutterblock for one-side dressing) |
BS 4361-11-1988 |
木工机械.第11部分:单轴钻床规范 |
(Woodworking machines - Specification for single spindle boring machines) |
BS 4361-12-1988 |
木工机械.第12部分:开铆机规范 |
(Woodworking machines - Specification for slot mortising machines) |
BS 4361-13-1988 |
木工机械.第13部分:两面、三面和四面模压机床规范 |
(Woodworking machines - Specification for two-, three- and four-side moulding machines) |
BS 4361-14-1988 |
木工机械.第14部分:镂铣机规范 |
(Woodworking machines - Specification for routing machines) |
BS 4361-15-1988 |
木工机械.第15部分:单板包装边缘剪切机规范 |
(Woodworking machines - Specification for veneer pack edge shears) |
BS 4361-16-1988 |
木工机械.第16部分:单链插床规范 |
(Woodworking machines - Specification for single chain mortising machines) |
BS 4361-17-1988 |
木工机械.第17部分:径向圆锯规范 |
(Woodworking machines - Specification for radial circular saws) |
BS 4361-18-1989 |
木工机械.第18部分:实木和装板纵向切割用单锯片往复圆锯规范 |
(Woodworking machines - Specification for single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels) |
BS 4361-19-1989 |
木工机械.齐两边精密圆锯床规范 |
(Woodworking machines - Specification for double edging precision circular sawing machines) |
BS 4361-1989 |
木工机械 第19部分:齐两边精密圆锯床规范 |
(Woodworking machines. Specification for double edging precision circular sawing machines) |
BS 4361-2.12-1974 |
木工机械.第2部分:精度试验.第12节:手动靠模铣床 |
(Specification for woodworking machines. Accuracy tests. Routing machines) |
BS 4361-2.13-1974 |
木工机械.第2部分:精度试验.第13节:车床 |
(Specification for woodworking machines. Accuracy tests. Turning lathes) |
BS 4361-20-1990 |
木工机械.第20部分:具有移动工作台的单锯片圆锯床规范 |
(Woodworking machines - Specification for single blade circular sawing machines with travelling table) |
BS 4361-21-1989 |
木工机械 第21部分:车床规范 |
(Woodworking machines - Specification for turning lathes) |
BS 4361-22-1990 |
木工机械.第22部分:双端开榫机规范 |
(Woodworking machines - Specification for double-end tenoning machines) |
BS 4361-23-1990 |
木工机械.第23部分:具有滑动工作台或框架的窄带磨光机名称 |
(Woodworking machines - Nomenclature for narrow belt sanding machines with sliding table or frame) |
BS 4361-24-1990 |
木工机械.第24部分:多轴钻床命名 |
(Woodworking machines - Nomenclature for multi-spindle boring machines) |
BS 4361-25-1990 |
木工机械.第25部分:万能工具和刀具刃磨机命名 |
(Woodworking machines - Nomenclature for universal tool and cutter sharpeners) |
BS 4361-26-1990 |
木工机械.第26部分:带锯锯片刃磨机命名 |
(Woodworking machines - Nomenclature for bandsaw blade sharpening machines) |
BS 4361-27-1990 |
木工机械.第27部分:带固定轴的盘式砂光机命名 |
(Woodworking machines - Nomenclature for disc sanding machines with spindle in fixed position) |
BS 4361-28-1990 |
木工机械.隔板涂层机命名 |
(Woodworking machines - Nomenclature for curtain coating machines) |
BS 4361-29-1990 |
木工机械.第29部分:宽带磨光机命名 |
(Woodworking machines - Nomenclature for wide belt sanding machines) |
BS 4361-3-1972 |
木工机械.第3部分:机床尺寸及加工能力 |
(Specification for woodworking machines - Machine sizes and capacities) |
BS 4361-30-1990 |
木工机械.第30部分:平滑表面手工上料平面胶合压力机命名 |
(Woodworking machines - Nomenclature for hand-loading veneering presses for flat surfaces) |
BS 4361-31-1990 |
木工机械.第31部分:交叉胶合板粘接机命名 |
Woodworking machines - Nomenclature for crosswise veneer splicing machines |
BS 4361-32-1990 |
木工机械.第32部分:单端边缘粘合机命名 |
(Woodworking machines - Nomenclature for single-end edge bonding machines) |
BS 4361-33-1990 |
木工机械.胶合板刨片机命名 |
(Woodworking machines - Nomenclature for veneer slicing machines) |
BS 4361-34-1990 |
木工机械.第34部分:具有摆动式刀具的凿榫机命名 |
(Woodworking machines - Nomenclature for mortising machines with oscillating tool action) |
BS 4361-35-1990 |
木工机械.第35部分:由板条制造心板料用机器命名 |
(Woodworking machines - Nomenclature for machines for production of core stock from laths) |
BS 4361-36-1990 |
木工机械.第36部分:多轴单端开榫机名命 |
(Woodworking machines - Nomenclature for single-end tenoning machines with several spindles) |
BS 4361-37-1990 |
木工机械.第37部分:四效木丝生产用卧式切丝机命名 |
(Woodworking machines - Nomenclature for horizontal shredding machines for wood wool production, quadruple effect) |
BS 4361-38-1990 |
木工机械.第38部分:木丝生产用带液压夹紧装置的立式切丝机命名 |
(Woodworking machines - Nomenclature for vertical shredding machines for wood wool production, with hydraulic clamping) |
BS 4361-39-1990 |
木工机械.第39部分:建筑工地用圆锯床命名 |
(Woodworking machines - Nomenclature for circular sawing machines for building sites) |
BS 4361-4-1988 |
木工机械.第4部分:台式带锯机床规范 |
(Woodworking machines - Specification for table bandsawing machines) |
BS 4361-40-1990 |
木工机械.升降工作台和平台命名 |
(Woodworking machines - Nomenclature for lifting tables and stages) |
BS 4361-5-1988 |
木工机械.第5部分:带或不带移动工作台的单锯片圆锯床规范 |
(Woodworking machines - Specification for single blade circular saw benches with or without travelling table) |
BS 4361-6-1988 |
木工机械.第6部分:单轴模压机床规范 |
(Woodworking machines - Specification for single spindle moulding machines) |
BS 4361-7-1988 |
木工机械.第7部分:单面刨光用带旋转组合铣刀的单面压刨床规范 |
(Woodworking machines - Specification for thickness planing machines with rotary cutterblock for one-side dressing) |
BS 4361-8-1988 |
木工机械.第8部分:2面、3面或4面刨光用刨床规范 |
(Woodworking machines - Specification for planing machines for two-, three- or four-side dressing) |
BS 4361-9-1988 |
木工机械.第9部分:平面刨床和单面压刨床规范 |
(Woodworking machines - Specification for surface planing and thicknessing machines) |
BS 4363-1998 |
施工和建筑工地降低压电源配电设备规范 |
(Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites) |
BS 4364-1993 |
工业用氧气规范 |
(Specification for industrial oxygen) |
BS 4366-1993 |
工业氮规范 |
(Specification for industrial nitrogen) |
BS 4367-1968 |
硝酸的试验方法 |
(Methods of test for nitric acid) |
BS 4368-1-1998 |
管用压缩连接件.分裂聚集压缩配件 |
(Metallic tube connectors for fluid power and general use - Split collet compression fittings) |
BS 4368-4-1984 |
管用压合接头.定型试验要求规范 |
(Metallic tube connectors for fluid power and general use - Specification for type test requirements) |
BS 437-1978 |
铸铁套接式排水管及配件规范 |
(Specification for cast iron spigot and socket drain pipes and fittings) |
BS 4370-3-1988 |
硬质微孔材料的试验方法.第3部分:方法12-13 |
(Methods of test for rigid cellular materials - Methods 12 and 13) |
BS 4370-4-1991 |
硬质微孔材料的试验方法.第4部分:方法14:弯曲性能测定 |
(Methods of test for rigid cellular materials - Method 14 - Determination of flexural properties) |
BS 4371-1991 |
纤维质密封垫规范 |
(Specification for fibrous gland packings) |
BS 4372-1968 |
工程人员用钢量尺规范 |
(Specification for engineers’ steel measuring rules) |
BS 4376-1-1991 |
电动血液冷藏箱规范.第1部分:闭式冷藏型 |
(Electrically operated blood storage refrigerators - Specification for closed reach-in types) |
BS 4376-2-1996 |
电动血液冷藏箱规范.第2部分:冷冻血浆储藏柜规范 |
(Electrically operated blood storage refrigerators - Specification for cabinets for the storage of frozen plasma) |
BS 4377-1991 |
螺纹镶齿金属丝锥进行孔攻丝的规范(ISO米制螺纹) |
(Specification for tapping of holes to receive wire thread inserts (ISO metric threads)) |
BS 4390-1969 |
轻便式气动磨床规范 |
(Specification for portable pneumatic grinding machines) |
BS 4393-1991 |
组件终端用的可焊覆锡或锡-铅涂覆导线规范 |
(Specification for solderable tin or tin-lead coated wires for component terminations) |
BS 4395-1-1969 |
结构工程用高强度摩擦扣紧螺栓和配套螺母及垫圈规范.第1部分:一般等级 |
(Specification for high strength friction grip bolts and associated nuts and washers for structural engineering - General grade) |
BS 4395-2-1969 |
结构工程用高强度摩擦扣紧螺栓和配套螺母及垫圈规范.第2部分:较高等级的螺栓、螺母和一般等级的垫圈 |
(Specification for high strength friction grip bolts and associated nuts and washers for structural engineering - Higher grade bolts and nuts and general grade washers) |
BS 4401-1-1998 |
肉及肉制品的试验方法.第1部分:总灰分的测定 |
(Methods of test for meat and meat products - Determination of total ash) |
BS 4401-10-1997 |
肉及肉制品的试验方法.第10部分:磷总含量的测定.光度测量法 |
(Methods of test for meat and meat products - Determination of total phosphorus content - Spectrometric method) |