标准号 |
中文名称 |
英文名称 |
| BS 3900-D9-1986 |
涂料的试验方法.第D集:涂料膜的光学试验.第9部分:颜色和色差的测定:测量 |
(Methods of test for paints - Optical tests on paint films - Determination of colour and colour difference: measurement) |
| BS 3900-E12.1-2000 |
涂料的试验方法.用显微镜测量凹槽长度法测定努普硬度 |
(Methods of test for paints - Determination of Knoop hardness by measurement of the indentation length using a microscope) |
| BS 3900-E12.2-2000 |
涂料的试验方法.用凹槽深度测量法测定努普硬度 |
(Methods of test for paints - Determination of Knoop hardness by measurement of the indentation depth) |
| BS 3900-E14-1997 |
涂料的试验方法.耐磨性的测定(回转磨擦覆纸轮) |
(Methods of test for paints - Determination of resistance to abrasion (Rotating abrasive-paper-covered wheel)) |
| BS 3900-E15-1997 |
涂料的试验方法.耐磨性的测定(回转磨擦橡胶轮) |
(Methods of test for paints - Determination of resistance to abrasion (Rotating abrasive rubber wheel)) |
| BS 3900-E16-2000 |
涂料的试验方法.耐磨损性的测定(往复试验板法) |
(Methods of test for paints - Determination of resistance to abrasion (reciprocating test panel method)) |
| BS 3900-E17-1997 |
涂料的试验方法.使用曲线描形针法测定耐损伤力 |
(Methods of test for paints - Determination of mar resistance using a curved stylus) |
| BS 3900-E18-1997 |
涂料的试验方法.使用尖底描形针法测定耐损伤力 |
(Methods of test for paints - Determination of mar resistance using a pointed stylus) |
| BS 3900-E19-1999 |
涂料的试验方法.通过铅笔试验对膜硬度的测定 |
(Methods of test for paints - Determination of film hardness by pencil test) |
| BS 3900-E2-1992 |
涂料的试验方法.第E2部分:刮痕试验 |
(Methods of test for paints. Scratch test) |
| BS 3900-E5-1998 |
涂料的试验方法.摆式阻尼试验 |
(Methods of test for paints. Pendulum damping test) |
| BS 3900-E7-1974 |
涂料的试验方法.第E7部分:抗冲击性(落球试验) |
(Methods of test for paints - Resistance to impact (falling ball test)) |
| BS 3900-E8-1974 |
涂料的试验方法.第E8部分:抗冲击性(摆锤试验) |
(Methods of test for paints - Resistance to impact (pendulum test)) |
| BS 3900-F10-1985 |
涂料的试验方法.第F集:涂料膜的耐久性试验.第10部分:海洋环境中用涂层耐阴极解粘合性的测定 |
(Methods of test for paints - Determination of resistance to cathodic disbonding of coatings for use in marine environments) |
| BS 3900-F11-1985 |
涂料的试验方法.第F集:涂料膜的耐久性试验.第11部分:陆基地下结构用涂层耐阴极解粘合性的测定 |
(Methods of test for paint - Durability tests on paint films - Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures) |
| BS 3900-F12-1997 |
涂料的试验方法.第F集:涂料膜的耐久性试验.第12部分:耐中性盐雾性的测定 |
(Methods of test for paint. Durability tests on paint films. Determination of resistance to neutral salt spray (fog)) |
| BS 3900-F15-1995 |
涂料的试验方法.第F15部分:耐湿度的测定(间歇式冷凝) |
(Methods of test for paints - Determination of resistance to humidity (intermittent condensation)) |
| BS 3900-F16-1997 |
涂料测试法.涂料薄膜上耐久试验.各种不同的涂料的测试法. 人工风化抗性(UV辐射和水) |
(Methods of test for paint. Durability tests on paint films. Resistance to artificial weathering (UV radiation and water)) |
| BS 3900-F17-1998 |
涂料试验方法.涂料膜持久性试验.涂层清洁度和湿刮抗性的测定 |
(Methods of test for paint. Durability tests on paint films. Determination of wet-scrub resistance and cleanability of coatings) |
| BS 3900-F18-1998 |
涂料的试验方法.涂膜的耐久性试验.耐湿(盐雾)/干热/湿气循环腐蚀的测定 |
(Methods of test for paint - Durability tests on paint films - Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle) |
| BS 3900-F19-2000 |
涂料的试验方法.漆膜的耐久性试验 |
(Methods of test for paint - Durability tests on paint films - Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light) |
| BS 3900-F2-1973 |
涂料的试验方法.涂膜的耐久性试验.耐湿性(循环冷凝)的测定 |
(Methods of test for paint - Durability tests on paint films - Determination of resistance to humidity (cyclic condensation)) |
| BS 3900-F4-1968 |
涂料的试验方法.第F4部分:耐连续盐雾性 |
(Methods of test for paints - Resistance to continuous salt spray) |
| BS 3900-F5-1972 |
涂料的试验方法.第F5部分:室内用涂料对人工光源的耐光性的测定 |
(Methods of test for paints - Determination of light fastness of paints for interior use exposed to artificial light sources) |
| BS 3900-F6-1976 |
涂料的试验方法.第F集:涂料膜的耐久性试验.第6部分:自然气候环境试验实施导则注释 |
(Methods of test for paint - Durability tests on paint films - Notes for guidance on the conduct of natural weathering test) |
| BS 3900-G6-1989 |
涂料的试验方法.耐霉菌生长性的评定 |
(Methods of test for paints - Assessment of resistance to fungal growth) |
| BS 3900-G7-1998 |
涂料的试验方法.热影响的测定 |
(Methods of test for paints. Determination of the effect of heat) |
| BS 3900-H6-1991 |
涂料的试验方法.涂料和清漆缺陷的评价.用沙带试验法对粉化度额定值的测定 |
(Methods of test for paints - Evaluation of paint and varnish defects - Rating of degree of chalking by tape method) |
| BS 3900-J1-1993 |
涂料的试验方法.粉未涂料的取样 |
(Methods of test for paints. Testing of coating powders. Sampling of coating powders) |
| BS 3900-J10-1998 |
涂料的试验方法.涂粉试验.涂粉沉淀效能的试验 |
(Methods of test for paints - Testing of coating powders - Determination of deposition efficiency of coating powders) |
| BS 3900-J11-1997 |
涂料的试验方法.粉末涂层的试验.第J11部分:涂覆粉末流的测定(斜面变型法) |
(Methods of test for paints - Testing of coating powders - Determination of flow of coating powders (inclined-plane method)) |
| BS 3900-J12-1998 |
涂料的试验方法.涂粉试验.涂粉亲合性测定 |
(Methods of test for paints - Testing of coating powders - Determination of compatibility of coating powders) |
| BS 3900-J13-2001 |
涂料的试验方法.涂覆粉试验.用激光衍射法分析粒径 |
(Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction) |
| BS 3900-J2-1993 |
涂料的试验方法.粉末涂层粒径分布的筛分测定 |
(Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving) |
| BS 3900-J3-1998 |
涂料的试验方法.涂层粉末的试验.涂层粉末凝胶时间测定 |
(Methods of test for paints - Testing of coating powders - Determination of gel time of coating powders) |
| BS 3900-J4-1995 |
涂料的试验方法.第J4部分:涂料粉末储存稳定性的测定 |
(Methods of test for paints - Determination of the storage stability of coating powders) |
| BS 3900-J5-1993 |
涂料的试验方法.粉末涂层加热时质量损失的测定 |
(Methods of test for paints - Testing of coating powders - Determination of loss of mass of coating powders on heating) |
| BS 3900-J6-1993 |
涂料的试验方法.粉末涂层的试验.用气体对比测重计测定粉末涂层的密度(参考法) |
(Methods of test for paints - Testing of coating powders - Determination of density of coating powders by gas comparison pyknometer (referee method)) |
| BS 3900-J7-1993 |
涂料的试验方法.粉末涂层的试验.用液体位移比重计测定粉末涂层的密度 |
(Methods of test for paints - Testing of coating powders - Determination of density of coating powders by liquid displacement pyknometer) |
| BS 3900-J8-1993 |
涂料的试验方法.粉末涂层防爆下限的计算 |
(Methods of test for paints - Testing of coating powders - Calculation of lower explosion limit of coating powders) |
| BS 3900-J9-1993 |
涂料的试验方法.粉末涂层/气体混合物的流动特性的测定 |
(Methods of test for paints - Testing of coating powders - Determination of flow properties of a coating powder/air mixture) |
| BS 3900-K1-2001 |
涂料的试验方法.用杀菌剂的一般萃取法测定防污漆中杀菌剂的释放率 |
(Methods of test for paints - Determination of release rate of biocides from antifouling paints - General method for extraction of biocides) |
| BS 3900-K2-2001 |
涂料的试验方法.防污漆中杀菌剂的释放率的测定.萃取物中铜离子浓度的测定和释放率的计算 |
(Methods of test for paints - Determination of release rate of biocides from antifouling paints - Determination of copper-ion concentration in the extract and calculation of the release rate) |
| BS 3903-1977 |
硫酸.发烟硫酸及液态三氧化硫的试验方法 |
(Methods of test for sulphuric acid, oleum and liquid sulphur trioxide) |
| BS 3905-1995 |
煤矿用的3.8/6.6 KV、300 A螺栓连接防爆电缆连接器和适配器 |
(Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines.) |
| BS 3907-1-1965 |
镁和镁合金的分析方法.第1部分:镁合金中铝含量的测定(重量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of aluminium in magnesium alloys (gravimetric method)) |
| BS 3907-10-1969 |
镁和镁合金的分析方法.第10部分:含稀土素锆、钍和(或)银的镁合金中锰含量的测定(光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and/or silver (photometric method)) |
| BS 3907-11-1970 |
镁和镁合金的分析方法.第11部分:镁和镁合金中硅含量的测定(光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of silicon in magnesium and magnesium alloys (photometric method)) |
| BS 3907-12-1971 |
镁和镁合金的分析方法.第12部分:镁和镁合金中铝含量的测定(光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of aluminium in magnesium and magnesium alloys (photometric method)) |
| BS 3907-13-1972 |
镁和镁合金的分析方法.第13部分:镁和镁合金中锡含量的测定(光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of tin in magnesium and magnesium alloys (photometric method)) |
| BS 3907-15-1976 |
镁和镁合金的分析方法.第15部分:镁和镁合金中铅含量的测定(原子吸收法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of lead in magnesium and magnesium alloys (atomic absorption method)) |
| BS 3907-2-1966 |
镁和镁合金的分析方法.第2部分:镁和镁合金中铁含量的测定(1:10-菲绕啉光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of iron in magnesium and magnesium alloys (photometric - 1:10-phenanthroline method)) |
| BS 3907-3-1966 |
镁和镁合金的分析方法.第3部分:镁和镁合金中铜含量的测定(光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of copper in magnesium and magnesium alloys (photometric method)) |
| BS 3907-4-1966 |
镁和镁合金的分析方法.第4部分:镁和镁合金中锰含量的测定(高碘酸盐光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium and magnesium alloys (photometric-periodate method)) |
| BS 3907-5-1966 |
镁和镁合金的分析方法.第5部分:镁和镁合金中低锰含量的测定(高碘酸盐光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium and magnesium alloys (photometric-periodate method) (low contents)) |
| BS 3907-6-1969 |
镁和镁合金的分析方法.第6部分:镁和镁合金中锆含量的测定(光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of zirconium in magnesium and magnesium alloys (photometric method)) |
| BS 3907-7-1969 |
镁和镁合金的分析方法.第7部分:镁合金中镍含量的测定(光度测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of nickel in magnesium alloys (photometric method)) |
| BS 3907-8-1970 |
镁和镁合金的分析方法.第8部分:镁合金中全部稀土族素含量的测定 |
(Methods for the analysis of magnesium and magnesium alloys - Determination of total rare earths in magnesium alloys (gravimetric method)) |
| BS 3907-9-1969 |
镁和镁合金的分析方法.第9部分:镁合金中锌含量的测定(乙二胺四醋酸离子交换容积测量法) |
(Methods for the analysis of magnesium and magnesium alloys - Determination of zinc in magnesium alloys (ion-exchange-volumetric EDTA method)) |
| BS 3908-10-1990 |
铅和铅合金的取样与分析方法.第10部分:铅合金中锑含量的测定(滴定法) |
(Methods for the sampling and analysis of lead and lead alloys - Antimony in lead alloys (titrimetric method)) |
| BS 3908-13-1970 |
铅和铅合金的取样与分析方法.第13部分:铅与铅合金中少量锑含量的测定(光度测量法) |
(Methods for the sampling and analysis of lead and lead alloys - Antimony in lead and lead alloys (low contents) (photometric method)) |
| BS 3908-2-1967 |
铅和铅合金的取样与分析方法.第2部分:铅及铅合金中砷含量的测定(光度测量法) |
(Methods for the sampling and analysis of lead and lead alloys - Arsenic in lead and lead alloys (photometric method)) |
| BS 3908-6-1971 |
铅和铅合金的取样与分析方法.第6部分:铅和铅合金中碲含量的测定(光度测量法) |
(Methods for the sampling and analysis of lead and lead alloys - Tellurium in lead and lead alloys (photometric method)) |
| BS 3908-9-1991 |
铅和铅合金的取样及分析方法.第9部分:铅和铅合金中硫含量的测定 |
(Methods for the sampling and analysis of lead and lead alloys - Sulphur in lead and lead alloys) |
| BS 3909-1965 |
屏蔽辐射用的铅锭规范 |
(Specification for ingot lead for radiation shielding) |
| BS 3914-1991 |
50ml-1400ml容量和直径不超过85mm的一次性使用的金属喷雾器规范 |
(Specification for non-refillable metal aerosol dispensers of 50 ml to 1400 ml capacity and up to 85 mm diameter) |
| BS 3919-1987 |
工业用牛脂与动物润滑脂规范 |
(Specification for technical tallow and animal grease) |
| BS 3923-2-1972 |
焊接的超声检验方法.第2部分:铁素体钢熔焊对接接头的自动检验 |
(Methods for ultrasonic examination of welds - Automatic examination of fusion welded butt joints in ferritic steels) |
| BS 3927-1986 |
隔热板和隔热型材用硬酚醛泡沫塑料规范 |
(Specification for rigid phenolic foam (PF) for thermal insulation in the form of slabs and profiled sections) |
| BS 3928-1969 |
空气过滤器的钠焰试验方法(内燃机和空气压缩机供气用的除外) |
(Method for sodium flame test for air filters (other than for air supply to I.C. engines and compressors)) |
| BS 3929-1965 |
家用固体燃料点火和便携式炉底点火的商业丁烷燃烧器规范 |
(Specification for domestic solid fuel ignition pokers and portable undergrate ignition burners for use with commercial butane) |
| BS 3934-1-1992 |
半导体器件的机械标准化.第1部分:半导体器件制图的推荐方法 |
(Mechanical standardization of semiconductor devices - Recommendations for the preparation of drawings of semiconductor devices) |
| BS 3934-10-1992 |
半导体器件的机械标准化.第10部分:英国国家制图尺寸一览表 |
(Mechanical standardization of semiconductor devices - Schedule of UK national drawings giving dimensions) |
| BS 3934-2-1992 |
半导体器件的机械标准化.第2部分:国际制图尺寸一览表 |
(Mechanical standardization of semiconductor devices - Schedule of international drawings giving dimensions) |
| BS 3934-5-1997 |
半导体器件的机械标准化.第5部分:集成电路胶带自动粘合的推荐方法 |
(Mechanical standardization of semiconductor devices - Recommendations applying to tape automated bonding (TAB) of integrated circuits) |
| BS 3934-6-1992 |
半导体器件的机械标准化.第6部分:表面安装半导体器件封装外壳外形制图的规范 |
(Mechanical standardization of semiconductor devices - Specification for the preparation of outline drawings of surface mounted semiconductor device packages) |
| BS 3935-1991 |
大牛皮和小牛皮的分类和标记指南 |
(Guide to classification and marking of cattle hides and calfskins) |
| BS 3936-1-1992 |
苗圃.第1部分:乔木和灌木规范 |
(Nursery stock - Specification for trees and shrubs) |
| BS 3936-10-1990 |
苗圃.第10部分:地被植物规范 |
(Nursery stock - Specification for ground cover plants) |
| BS 3936-11-1984 |
苗圃.第11部分:盆栽烹调用香草类植物规范 |
(Nursery stock - Specification for container-grown culinary herbs) |
| BS 3936-2-1990 |
苗圃.第2部分:玫瑰规范 |
(Nursery stock - Specification for roses) |
| BS 3936-3-1990 |
苗圃.第3部分:果树规范 |
(Nursery stock - Specification for fruit plants) |
| BS 3936-4-1984 |
苗圃.第4部分:林木规范 |
(Nursery stock - Specification for forest trees) |
| BS 3936-5-1985 |
苗圃.第5部分:杨树和柳树规范 |
(Nursery stock - Specification for poplars and willows) |
| BS 3936-7-1989 |
苗圃.花坛花卉规范 |
(Nursery stock - Specification for bedding plants) |
| BS 3936-9-1998 |
苗圃.鳞茎、球茎和块茎规范 |
(Nursery stock - Specification for bulbs, corms and tubers) |
| BS 3939-1-1986 |
电力、电信和电子图用图形符号指南.第1部分:一般介绍、总索引 |
(Graphical symbols for electrical power, telecommunications and electronics diagrams - General information, general index) |
| BS 3944-1-1992 |
剧院、电视和类似娱乐场所用的颜色和漫射过滤材料.第1部分:可燃性和尺寸稳定性规范 |
(Colour and diffusion filter material for theatre, television and similar entertainment purposes - Specification for flammability and dimensional stability) |
| BS 3947-1976 |
液态氯规范 |
(Specification for liquid chlorine) |
| BS 3951-1.2-1985 |
货运集装箱.第1部分:总则.第2节:系列1货运集装箱角件规范 |
(Freight containers - General - Specification for corner fittings for series 1 freight containers) |
| BS 3951-1.4-1983 |
货运集装箱.第1部分:总则.第4节:术语词汇 |
(Freight containers - General - Glossary of terminology) |
| BS 3951-2.1-1991 |
货运集装箱.第2部分:系列1货运集装箱和规范试验.第1节:一般用途的普通货物集装箱 |
(Freight containers - Specification and testing of series 1 freight containers - General cargo containers for general purposes) |
| BS 3951-2.5-1992 |
货运集装箱.第2部分:系列1货运集装箱的试验和规范.第5节:平台和平台底座型集装箱 |
(Freight containers - Specification and testing of series 1 freight containers - Platform and platform-based containers) |
| BS 3958-1-1982 |
隔热材料.预制氧化镁绝热材料 |
(Thermal insulating materials - Magnesia preformed insulation) |
| BS 3958-2-1982 |
隔热材料规范.预制硅酸钙绝热材料 |
(Thermal insulating materials - Calcium silicate preformed insulation) |
| BS 3958-3-1985 |
隔热材料.金属网面人造矿物纤维垫 |
(Thermal insulating materials - Metal mesh faced man-made mineral fibre mattresses) |
| BS 3958-4-1982 |
隔热材料.粘结的预制人造矿物纤维管型材 |
(Thermal insulating materials - Bonded preformed man-made mineral fibre pipe sections) |
| BS 3958-5-1986 |
隔热材料.第5部分:粘结的人造矿物纤维板规范 |
(Thermal insulating materials - Specification for bonded man-made mineral fibre slabs) |
| BS 3958-6-1972 |
隔热材料.精整材料;硬结复合材料,自固化水泥和石膏粉饰材料 |
(Thermal insulating materials - Finishing materials; hard setting composition, self-setting cement and gypsum plaster) |
| BS 3962-1-1980 |
木制家具精整的试验方法.用85°角的镜面光泽测量作低角度眩光的评定 |
(Methods of test for finishes for wooden furniture - Assessment of low angle glare by measurement of specular gloss at 85 degrees) |
| BS 3962-5-1980 |
木制家具精整的试验方法.第5部分:表面耐冷凝油和脂肪性的评定 |
(Methods of test for finishes for wooden furniture - Assessment of surface resistance to cold oils and fats) |
| BS 3962-6-1980 |
木制家具精整的试验方法.第6部分:耐机械损伤性的评定 |
(Methods of test for finishes for wooden furniture - Assessment of resistance to mechanical damage) |
| BS 3963-1974 |
混凝土搅拌机搅拌性能的试验方法 |
(Method for testing the mixing performance of concrete mixers) |
| BS 3969-1998 |
一般用途草皮的推荐规范 |
(Recommendations for turf for general purposes) |
| BS 397-3-1985 |
原电池.第3部分:不包括在第1、第2部分内的电池规范 |
(Primary batteries. Specification for batteries not included in Parts 1 and 2) |
| BS 3970-2-1991 |
医疗制品用灭菌消毒设备.第2部分:装含水液体的密封硬质容器用蒸汽消毒器规范 |
(Sterilizing and disinfecting equipment for medical products - Specification for steam sterilizers for aqueous fluids in sealed rigid containers) |
| BS 3970-4-1990 |
医疗制品用灭菌消毒设备.第4部分:非包装仪器和器皿用移动式蒸气灭菌器规范 |
(Sterilizing and disinfecting equipment for medical products - Specification for transportable steam sterilizers for unwrapped instruments and utensils) |
| BS 3970-5-1990 |
医疗制品用灭菌消毒设备.低温蒸汽消毒器规范 |
(Sterilizing and disinfecting equipment for medical products - Specification for low temperature steam disinfectors) |
| BS 3970-6-1993 |
医疗制品用灭菌消毒设备.甲醛低温蒸汽消毒规范 |
(Sterilizing and disinfecting equipment for medical products - Specification for sterilizers using low-temperature steam with formaldehyde) |
| BS 3974-1-1974 |
管支架规范.第1部分:吊管器、滑板式及辊式支架 |
(Specification for pipe supports - Pipe hangers, slider and roller type supports) |
| BS 3974-2-1978 |
管支架规范.第2部分:管夹、管笼、悬臂及梁附件 |
(Specification for pipe supports - Pipe clamps, cages, cantilevers and attachments to beams) |
| BS 3974-3-1980 |
管支架规范.第3部分:海上和其他用途的高温大孔径支架 |
(Specification for pipe supports - Large bore, high temperature, marine and other applications) |
| BS 3981-1976 |
涂料用氧化铁颜料规范 |
(Specification - Iron oxide pigments for paints) |
| BS 3982-1996 |
锌粉颜料规范 |
(Specification for zinc dust pigment) |
| BS 3984-1982 |
硅酸钠规范 |
(Specification for sodium silicates) |
| BS 3985-2003 |
血红蛋白光谱测定用氰化正铁血红蛋白制备标准 |
(Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry) |
| BS 3986-1-1991 |
农业谷类作物干燥机的干燥性能试验方法.一般程序和小麦的受限要求 |
(Methods of test for drying performance of agricultural grain dryers - General procedures and limited requirements for wheat) |
| BS 3986-2-1998 |
农业谷类作物干燥机干燥性能的试验方法.附加程序和农作物特定要求 |
(Methods of test for drying performance of agricultural grain dryers - Additional procedures and crop specific requirements) |
| BS 3987-1991 |
建筑物外部装饰用锻铝的阳极氧化物覆层规范 |
(Specification for anodic oxidation coatings on wrought aluminium for external architectural applications) |
| BS 3988-1970 |
电工用锻铝规范.绝缘电缆用实芯导线 |
(Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com