标准号 |
中文名称 |
英文名称 |
BS 4193-15-1986 |
镶硬质合金刀具.第15部分:无固定孔的可转位刮棱硬质合金刀片的尺寸规范 |
(Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with wiper edges but without fixing hole) |
BS 4193-16-1986 |
镶硬质合金刀具.第16部分:可转位刀片用柄式铣刀命名规范 |
(Hardmetal insert tooling - Specification for designation of shank type milling cutters for indexable inserts) |
BS 4193-17-1989 |
镶硬质合金刀具.第17部分:可转位刀片用膛孔型铣刀命名规范 |
(Hardmetal insert tooling - Specification for designation of bore type milling cutters for indexable inserts) |
BS 4193-18-1999 |
硬质合金刀具.可转位刀片用钻杆的尺寸规格 |
(Hardmetal insert tooling - Specification for dimensions of boring bars for indexable inserts) |
BS 4193-19-1993 |
镶硬质合金刀具.无固定孔圆角可转位陶瓷刀片尺寸规范 |
(Hardmetal insert tooling - Specification for dimensions of indexable ceramic inserts with rounded corners without fixing hole) |
BS 4193-1993 |
镶硬质合金刀具.第19部分:无固定孔圆角可转位陶瓷刀片尺寸规范 |
(Hardmetal insert tooling. Specification for dimensions of indexable ceramic inserts with rounded corners without fixing hole) |
BS 4193-2-1986 |
镶硬质合金刀具.第2部分:无固定孔的圆角可转位硬质合金(碳化物)刀片尺寸规范 |
(Hardmetal insert tooling - Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole) |
BS 4193-20-1993 |
镶硬质合金刀具.第20部分:有固定孔圆角可转位陶瓷刀片尺寸的规范 |
(Hardmetal insert tooling - Specification for dimensions of ceramic inserts with rounded corners with fixing hole) |
BS 4193-21-1993 |
镶硬质合金刀具.第21部分:带可转位硬质合金镶刃的直柄钻头规范 |
(Hardmetal insert tooling - Specification for cylindrical shanks with a parallel flat for drills with indexable inserts) |
BS 4193-22-1996 |
有断屑器的分度刀片的近似切屑控制范围的分类和设计 |
(Hardmetal insert tooling - Classification and designation of approximate chip control zones for indexable inserts with chipbreakers) |
BS 4193-3-1997 |
镶硬质合金刀具.有圆柱圆定孔和圆角可转位硬质合金(碳化物)刀片尺寸规范 |
(Hardmetal insert tooling - Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole) |
BS 4193-6-1997 |
镶硬质合金刀具.第6部分:可转位(多刃)刀片用旋转夹和仿形刀夹及卡盘的命名规范 |
(Hardmetal insert tooling - Specification for the designation of turning and copying tool holders and cartridges for indexable (throwaway) inserts) |
BS 4193-7-1999 |
硬质合金刀具.可转位刀片车削和仿形用单刃刀具夹持器.尺寸 |
(Hardmetal insert tooling - Single point tool holders for turning and copying for indexable inserts - Dimensions) |
BS 4193-8-1997 |
镶硬质合金刀具.第8部分:可转位(多刃)刀用A 型卡盘的尺寸规范 |
(Hardmetal insert tooling - Specification for dimensions for type A cartridges for indexable (throwaway) inserts) |
BS 4193-9-1982 |
镶硬质合金刀具.第9部分:带可转位刀片和扁平直柄的端铣刀规范 |
(Hardmetal insert tooling - Specification for end mills with indexable inserts and flatted parallel shank) |
BS 4198-1967 |
响度计算方法 |
(Method for calculating loudness) |
BS 4203-1-1980 |
挤塑硬聚氯乙烯瓦楞板.第1部分:性能要求规范 |
(Extruded rigid PVC corrugated sheeting - Specification for performance requirements) |
BS 4203-2-1980 |
挤塑硬聚氯乙烯瓦楞板.第2部分:外形和尺寸规范 |
(Extruded rigid PVC corrugated sheeting - Specification for profiles and dimensions) |
BS 4204-1989 |
承压钢管的闪光焊规范 |
(Specification for flash welding of steel tubes for pressure applications) |
BS 4207-1990 |
钢制烟囱和烟道整体衬砌层安装的实用规范 |
(Code of practice for the installation of monolithic linings for steel chimneys and flues) |
BS 4211-1994 |
烟囱、筒仓、存斗和其它高建筑物攀登用永久性梯子规范 |
(Specification for ladders for permanent access to chimneys, other high structures, silos and bins) |
BS 4213-1991 |
容量500L以下家用冷水贮水和混合供水与膨胀水箱(聚烯烃或烯烃共聚物)规范 |
(Specification for cold water storage and combined feed and expansion cisterns (polyolefin or olefin copolymer) up to 500 L capacity used for domestic purposes) |
BS 4213-2004 |
家用水箱.容量500L及以下冷水贮水和混合供水与膨胀(热塑性)水箱规范 |
|
BS 4215-15-1990 |
电阻点焊电极.焊钳和辅助设备.第15部分:电极台板上用的绝缘插头 |
(Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for insulated pins for use in electrode back-ups) |
BS 4215-2-1987 |
电阻点焊用电极、电极夹和辅助设备.第2部分:电阻点焊用直电极规范 |
(Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for straight resistance spot welding electrodes) |
BS 4215-6-1987 |
电阻点焊用电极、电极夹和辅助设备.第6部分:内锥度1:10的电极适配器规范 |
(Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for electrode adaptors, female taper 1:10) |
BS 4215-7-1987 |
电阻点焊用电极、电极夹和辅助设备.第7部分:插入式电极帽规范 |
(Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for male electrode caps) |
BS 4220-1-1974 |
农用轮式拖拉机座位的试验方法.第1部分:人工道路试验 |
(Methods of test for seats on agricultural wheeled tractors - Tests on artificial track) |
BS 4222-1967 |
牙科手机传动联轴器(滑配接头)尺寸规范 |
(Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces) |
BS 4223-1989 |
纱绒铺地织物结构细节测定方法 |
(Methods for determination of constructional details of textile floor coverings with yarn pile) |
BS 4227-1986 |
牙科用汞规范 |
(Specification for dental mercury) |
BS 4230-1967 |
眼科软膏用金属包装软管规范 |
(Specification for metal collapsible tubes for eye ointment) |
BS 4231-1992 |
工业液体润滑剂粘度等级分类 |
(Classification for viscosity grades of industrial liquid lubricants) |
BS 4235-1-1972 |
米制键及键槽规范.第1部分:平键和锥形键 |
(Specification for metric keys and keyways - Parallel and taper keys) |
BS 4235-2-1977 |
米制键及键槽规范.第2部分:月牙键及键槽 |
(Specification for metric keys and keyways - Woodruff keys and keyways) |
BS 4247-1-1981 |
放射性区域用的表面材料.第1部分:去污染系数的测量与计算方法 |
(Surface materials for use in radioactive areas - Methods of measuring and evaluating the decontamination factor) |
BS 4247-2-1982 |
放射性区域用的表面材料.第2部分:材料选择指南 |
(Surface materials for use in radioactive areas - Guide to the selection of materials) |
BS 4248-2004 |
过硫酸盐水泥 |
|
BS 4249-1990 |
纸和软木/纸基粘结材料规范 |
(Specification for paper and cork/paper jointing) |
BS 4250-1997 |
商业用丁烷和丙烷规范 |
(Specification for commercial butane and commercial propane) |
BS 4254-1983 |
两组分多硫化合物基密封胶规范 |
(Specification for two-part polysulphide-based sealants) |
BS 4255-1-1986 |
建筑物风雨防护用预制橡胶衬垫.第1部分:非微孔橡胶衬垫规范 |
(Rubber used in preformed gaskets for weather exclusion from buildings - Specification for non-cellular gaskets) |
BS 4257-1967 |
电信和有关电子设备用铁磁氧化物制E形磁芯尺寸规范 |
(Specification for the dimensions of E-cores made of ferromagnetic oxides for use in telecommunication and allied electronic equipment.) |
BS 4258-10-1978 |
工业用磷酸(正磷酸)的试验方法.第10部分:氮的氧化物含量的测定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of oxides of nitrogen content) |
BS 4258-11-1982 |
工业用磷酸(正磷酸)的试验方法.第11部分:铅含量的测定(原子吸收光谱测定法) |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of lead content (atomic absorption spectrometric method)) |
BS 4258-12-1982 |
工业用磷酸(正磷酸)的试验方法.第12部分:取样技术指南 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Guide to sampling techniques) |
BS 4258-13-1990 |
工业用磷酸(正磷酸)的试验方法.第13部分:可溶性硫酸盐含量的测定(电位测量法) |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of soluble sulphate content (potentiometric method)) |
BS 4258-2-1989 |
工业用磷酸(正磷酸)的试验方法.第2部分:铁含量的测定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of iron content) |
BS 4258-3-1989 |
工业用磷酸(正磷酸)的试验方法.第3部分:硫含量的测定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of sulphate content) |
BS 4258-4-1976 |
工业用磷酸(正磷酸)的试验方法.第4部分:氟含量的测定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of fluorine content) |
BS 4258-5-1989 |
工业用磷酸(正磷酸)的试验方法.第5部分:硅含量的测定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of silica content) |
BS 4258-6-1976 |
工业用磷酸(正磷酸)的试验方法.第6部分:砷含量的测定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of arsenic content) |
BS 4258-7-1978 |
工业用磷酸(正磷酸)的试验方法.第7部分:全氧化磷(V)含量的测定:磷钼酸喹啉重量法 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of total phosphorus (V) oxide content: quinoline phosphomolybdate gravimetric method) |
BS 4258-8-1978 |
工业用磷酸(正磷酸)的试验方法.第8部分:钙含量的测定(火焰原子吸收法) |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of calcium content (flame atomic absorption method)) |
BS 4258-9-1989 |
工业用磷酸(正磷酸)的试验方法.第9部分:氯化物含量的测定 |
(Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of chloride content) |
BS 426-1969 |
机床和其他用途的死顶尖规范 |
(Specification for fixed centres for use on machine tools and in other applications) |
BS 4261-1999 |
木材防腐.词汇 |
(Wood preservation - Vocabulary) |
BS 4262-1984 |
高炉用焦炭技术质量的规定方法 |
(Method of specifying the technical quality of coke for use in blast furnaces) |
BS 4263-1967 |
舱口活动梁标志规范 |
(Specification for the marking of hatchway beams) |
BS 4264-1987 |
商业、公务及专业用信封规范 |
(Specification for envelopes for commercial, official and professional use) |
BS 4267-0-1987 |
硝酸铵.第0部分:一般介绍 |
(Ammonium nitrate - General introduction) |
BS 4267-1-1988 |
硝酸铵.第1部分:氨型氮含量的测定方法 |
(Ammonium nitrate - Method for determination of ammoniacal nitrogen content) |
BS 4267-10-1994 |
硝酸铵.二乙醚中可溶物质的测定方法 |
(Ammonium nitrate - Method for determination of matter soluble in diethyl ether) |
BS 4267-11-1994 |
硝酸铵.水中无机物质和硬渣不可溶物的测定方法 |
(Ammonium nitrate - Method for determination of inorganic matter and grit insoluble in water) |
BS 4267-2-1988 |
硝酸铵.第2部分:全氮含量的测定方法 |
(Ammonium nitrate - Method for determination of total nitrogen content) |
BS 4267-3-1987 |
硝酸铵.第3部分:pH值的测定方法 |
(Ammonium nitrate - Method for measurement of pH value) |
BS 4267-4-1987 |
硝酸铵.第4部分:硫酸盐灰分的测定方法 |
(Ammonium nitrate - Method for determination of sulphated ash) |
BS 4267-5-1987 |
硝酸铵.第5部分:水不溶物的测定方法 |
(Ammonium nitrate - Method for determination of matter insoluble in water) |
BS 4267-6-1987 |
硝酸铵.第6部分:水分的测定方法 |
(Ammonium nitrate - Method for determination of water content) |
BS 4267-7-1987 |
硝酸铵.第7部分:亚硝酸盐含量的测定方法 |
(Ammonium nitrate - Methods for determination of nitrite content) |
BS 4267-8-1987 |
硝酸铵.第8部分:氯化物含量的测定方法 |
(Ammonium nitrate - Methods for determination of chloride content) |
BS 4267-9-1987 |
硝酸铵.第9部分:硫酸盐含量测定方法 |
(Ammonium nitrate - Method for determination of sulphate content) |
BS 4268-1967 |
木制舱盖标志规范 |
(Specification for the marking of wooden hatchway covers) |
BS 4269-2-1991 |
牙科用弹性印模材料.第2部分:藻酸盐印模材料规范 |
(Dental elastic impression material - Specification for alginate impression material) |
BS 4272-1-1968 |
麻醉机和止痛机.氧化亚氮和氧气分别由单独容器供给的按需供给麻醉机 |
(Anaesthetic and analgesic machines - Anaesthetic machines of the on-demand type supplied with nitrous oxide and oxygen from separate containers) |
BS 4272-2-1996 |
麻醉机和止痛机.使用50/50%一氧化二氮和氧气的间歇(需要)流止痛机的规范 |
(Anaesthetic and analgesic machines - Specification for intermittent (demand) flow analgesic machines for use with 50/50% (V/V) nitrous oxide and oxygen) |
BS 4272-3-1989 |
麻醉机和止痛机.第3部分:连续流麻醉机规范 |
(Anaesthetic and analgesic machines - Specification for continuous flow anaesthetic machines) |
BS 4274-1-2003 |
视力检测方式.远距视力临床测定用检测表规范 |
(Visual acuity test types - Test charts for clinical determination of distance visual acuity - Specification) |
BS 4275-1997 |
有效呼吸保护装置程序执行指南 |
(Guide to implementing an effective respiratory protective device programme) |
BS 4276-1968 |
线材、棒材和管材压延冲模的硬质金属规范 |
(Specification for hard metal for wire, bar and tube drawing dies) |
BS 4277-1968 |
胶版印刷术语词汇 |
(Glossary of terms used in offset lithographic printing) |
BS 4278-1984 |
提升用有眼螺拴规范 |
(Specification for eyebolts for lifting purposes) |
BS 4280-1968 |
阿拉伯字符的音译 |
(Transliteration of Arabic characters) |
BS 4284-1981 |
牙印模膏(氧化锌型)规范 |
(Specification for dental impression pastes (zinc oxide type)) |
BS 4285-0-1990 |
乳品的微生物检验.第0部分:一般介绍 |
(Microbiological examination for dairy purposes - General introduction) |
BS 4285-1.1-1991 |
乳品的微生物检验.第1部分:一般程序指南.第1节:取样及样品制备 |
(Microbiological examination for dairy purposes - Guide to general procedures - Sampling and preparation of samples) |
BS 4285-2.1-1984 |
乳品的微生物检验.第2部分:微生物计数的一般应用方法.第1节:采用倾注平皿菌落计数技术的微生物计数方法 |
(Microbiological examination for dairy purposes - Methods of general application for enumeration of microorganisms - Enumeration of microorganisms by poured plate technique for colony count) |
BS 4285-2.3-1984 |
乳品的微生物检验.第2部分:微生物计数的一般应用方法.第3节:采用表面平皿菌落计数技术的微生物计数方法 |
(Microbiological examination for dairy purposes - Methods of general application for enumeration of microorganisms - Enumeration of microorganisms by surface plate technique for colony count) |
BS 4285-2.5-1989 |
乳品的微生物检验.第2部分:微生物计数的一般应用方法.第5节:采用直接显微计数的细菌计数方法 |
(Microbiological examination for dairy purposes - Methods of general application for enumeration of microorganisms - Enumeration of bacteria by direct microscopic counts) |
BS 4285-2.6-1984 |
乳品的微生物检验.第2部分:微生物计数的一般应用方法.第6节:采用最大概率数技术的细菌计数方法 |
(Microbiological examination for dairy purposes - Methods of general application for enumeration of microorganisms - Enumeration of microorganisms by most probable number technique) |
BS 4285-3.10.1-1989 |
乳品的微生物检验.第3部分:微生物群的检测和(或)计数方法.第10节:金黄色酿脓葡萄球菌.第1小节:采用菌落计数 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Staphylococcus aureus. - Enumeration using the colony count technique) |
BS 4285-3.10.2-1989 |
乳品的微生物检验.微生物种群的检测和(或)计数方法.金黄色酿脓葡萄球菌.检测 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms Staphylococcus aureus - Detection) |
BS 4285-3.10.3-1989 |
乳品的微生物检验.微生物种群的检测和(或)计数方法.金黄色酿脓葡萄球菌.采用最大概率数技术的计数方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Staphylococcus aureus - Enumeration using the most probable number tech) |
BS 4285-3.11-1985 |
乳品的微生物检验.微生物种群的检测和(或)计数方法.类链球菌的检测和计数 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Detection and enumeration of faecal streptococci) |
BS 4285-3.12-1989 |
乳品的微生物检验.第3部分:微生物种群的检测和(或)计数方法.第12节:蜡样芽胞杆菌的计数 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of Bacillus cereus.) |
BS 4285-3.14-1988 |
乳品的微生物检验.微生物种群的检测和(或)计数方法.嗜温微生物的计数 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of mesophilic microorganisms) |
BS 4285-3.15-1993 |
乳品的微生物检验.微生物特定种群检测和/或计数方法.李斯特菌属单核微生物的检测 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Detection of Listeria monocytogenes) |
BS 4285-3.2-1991 |
乳品的微生物检验.微生物特定种群的检测和/或计数方法.耐热细菌的计数方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of thermoduric bacteria) |
BS 4285-3.4.2-1989 |
乳品的微生物检验.微生物特定种群的检测和/或计数方法.脂解微生物的计数方法.三丁酸甘油琼脂法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of lipolytic microorganisms - Tributyrin agar method) |
BS 4285-3.5-1988 |
乳品的微生物检验.微生物种群的检测和(或)计数方法.蛋白水解的微生物计数方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of proteolytic microorganisms) |
BS 4285-3.6-1986 |
乳品的微生物检验.微生物种群的检测和(或)计数方法.酵母与霉菌的计数方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of yeasts and moulds) |
BS 4285-3.7-1987 |
乳品的微生物检验.微生物种群的检测和(或)计数方法.大肠杆菌类计数 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Enumeration of coliform bacteria) |
BS 4285-3.9.1-1987 |
乳品的微生物检验.微生物种群的检测和/或计数方法.沙门氏菌属的检验.参考方法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Detection of Salmonella - Reference method.) |
BS 4285-3.9.2-1992 |
乳品的微生物检验.第3部分:微生物种群的检测和(或)计数方法.第9节:沙门氏菌属的检验.电导率屏蔽法 |
(Microbiological examination for dairy purposes - Methods for detection and/or enumeration of specific groups of microorganisms - Detection of Salmonella - Screening method using electrical conductance) |
BS 4285-4-1991 |
乳品的微生物检验.第4部分:卫生条件评定方法 |
(Microbiological examination for dairy purposes - Methods for assessment of hygienic conditions) |
BS 4285-5.2-1989 |
乳品的微生物检验.辅助方法.奶油和冰淇淋的亚甲蓝还原试验 |
(Microbiological examination for dairy purposes - Ancillary methods - Methylene blue reduction test for cream and ice cream) |
BS 4285-5.3-1987 |
乳品的微生物检验.第5部分:辅助方法.第3节:抑制物质的试验 |
(Microbiological examination for dairy purposes - Ancillary methods - Test for inhibitory substances) |
BS 4289-5-1989 |
油料种子的分析方法.第5部分:脂肪酸度的测定 |
(Method for the analysis of oilseeds - Determination of acidity of fat) |
BS 4289-8-1988 |
油料种子的分析方法.湿度计的校准检验 |
Methods for analysis of oilseeds - Check of the calibration of moisture meters |
BS 4290-1989 |
装饰或保护用银和银合金电镀层规范的规定方法 |
Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes |
BS 4292-1-1989 |
金与金合金电镀层规范的规定方法.第1部分:工程用金与金合金 |
Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for engineering purposes |
BS 4292-2-1989 |
金和金合金电镀层规范的规定方法.第2部分:装饰或保护用金和金合金 |
Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for decorative and protective purposes |
BS 4300/10-1969 |
一般工程用锻造铝和铝合金规范(补充系列).第10部分:5454型冷拔管 |
Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) - 5454 Drawn tube |
BS 4300/13-1969 |
一般工程用锻造铝和铝合金规范(补充系列)第13部分:5554型焊丝 |
(Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) - 5554 Welding wire) |
BS 4301-1991 |
光学件和系统制图的推荐方法 |
Recommendations for preparation of drawings for optical elements and systems |
BS 4303-1968 |
机织织物耐撕裂性的织物翼形裂幅技术测定 |
Method for the determination of the resistance to tearing of woven fabrics by the wing-rip technique |
BS 4305-1-1989 |
聚丙烯材料制家用浴盆.第1部分:精制浴盆规范 |
Baths for domestic purposes made of acrylic material - Specification for finished baths |
BS 4305-2-1989 |
聚丙烯材料制家用浴盆.第2部分:连接尺寸规范 |
Baths for domestic purposes made of acrylic material - Specification for connecting dimensions |
BS 4309-1968 |
实验室用电阻炉性能的测量方法 |
Methods of measuring the performance of laboratory electric resistance furnaces |
BS 4311-2-1994 |
量块和附件规范.第2部分:附件 |
(Specification for gauge blocks and accessories - Accessories) |