标准号 |
中文名称 |
英文名称 |
| BS 3993-1966 |
商业用1型 和2型盐酸规范 |
(Specification for hydrochloric acid, commercial types 1 and 2) |
| BS 3996-1978 |
单标志和刻度移液管的色码(包括色码釉层使用性能的要求)规范 |
(Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels)) |
| BS 3998-1989 |
森林管理推荐规范 |
(Recommendations for tree work) |
| BS 3999-1-1993 |
家用电器性能的测量方法.电水壶 |
(Methods of measuring the performance of household electrical appliances - Electric kettles and jugs) |
| BS 3999-16-1993 |
家用电器性能的测量方法.电加热板 |
(Methods of measuring the performance of household electrical appliances - Electric warming plates) |
| BS 3999-17-1993 |
家用电器性能测量方法.手提式电源电压操作的喷枪 |
(Methods of measuring the performance of household electrical appliances - Hand-held mains voltage operated spray guns) |
| BS 3999-2-1991 |
家用电器性能的测量方法.储热式电热水器 |
(Methods of measuring the performance of household electrical appliances - Thermal storage electric water-heaters) |
| BS 3999-4-1967 |
家用电器性能的测量方法.第4部分:电烘衣箱及架 |
(Methods of measuring the performance of household electrical appliances - Electric clothes drying cabinets and racks) |
| BS 3A 100-1991 |
抗拉强度不大于1249MPa的螺栓和自由转动螺母的一般要求规范 |
(Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa) |
| BS 3A 103-1962 |
飞行器用钢螺母(统一六边形统一螺纹)(普通形、薄形、槽形和槽顶形)规范 |
(Specification for steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft) |
| BS 3A 105-1962 |
飞行器用抗腐蚀钢螺母(统一六角形、统一螺纹)(普通形、薄形、槽形和槽顶形)规范 |
(Specification for corrosion-resisting steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft) |
| BS 3A 107-1962 |
飞行器用铝合金螺母(统一六角形和统一螺纹)(普通和开槽形)规范 |
(Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft) |
| BS 3A 108-1962 |
飞行器用紧公差钢螺栓(统一六角头和统一螺纹)规范 |
(Specification for steel bolts (Unified hexagons and Unified threads) with close tolerance shanks for aircraft) |
| BS 3A 109-1985 |
钢制抗剪螺栓(统一六角头和统一螺纹)规范 |
(Specification for steel shear bolts (Unified hexagons and Unified threads)) |
| BS 3A 116-1962 |
飞行器用钢平锥头螺栓(统一螺纹)规范 |
(Specification for steel pan head bolts (Unified threads) for aircraft) |
| BS 3A 117-1962 |
飞行器用抗腐蚀钢平锥头螺栓(统一螺纹)规范 |
(Specification for corrosion-resisting steel pan head bolts (Unified threads) for aircraft) |
| BS 3A 125 to 3A 132, 3A 136 to |
航天器用系紧螺母(统一螺纹)规范 |
(Specification for stiffnuts (Unified threads) for aircraft) |
| BS 3A 125 to 3A 132-1981 |
飞行器用刚性螺母(统一螺纹)规范 |
(Specification for stiffnuts (Unified threads) for aircraft) |
| BS 3A 125 to 3A [...]-1981 |
飞行器用防松螺帽规范(统一螺纹) |
(Specification for stiffnuts (Unified threads) for aircraft) |
| BS 3A 171-1962 |
飞行器铝合金平锥头螺栓(统一螺纹)规范 |
(Specification for aluminium alloy pan head bolts (Unified threads) for aircraft) |
| BS 3A 212-1993 |
55/65 tonf/in |
(Specification for cadmium-plated steel bolts, 55/65 tonf/inUP2 (Unified hexagons, 3A Unified threads and close tolerance shanks)) |
| BS 3C 7-1989 |
飞机轮胎汽门嘴规范:互换性尺寸 |
(Specification for aircraft tyre valves: interchangeability dimensions) |
| BS 3F 114-1995 |
每平方米重80克马德波勒姆细布纤维规范 |
(Specification for 80 g/m) |
| BS 3F 116-1995 |
丝光棉纤维规范 |
(Specification for mercerized cotton fabric) |
| BS 3F 121-1995 |
航空航天用金属滑动紧固件规范 |
(Specification for metallic slide fasteners for aerospace purposes) |
| BS 3F 122-1990 |
充气救生船的降落伞用氯丁橡胶夹层的双层棉织物规范 |
(Specification for two ply cotton fabric interlayered with polychloroprene for liferaft packs) |
| BS 3F 126-2002 |
35g/m |
(35 g/mUP2 nylon parachute fabric) |
| BS 3F 129-2003 |
航空航天用聚酯窄织物 |
(Woven polyester narrow fabrics for aerospace purposes) |
| BS 3F 135-2002 |
航空航天用无规定尺寸稳定性的尼龙编织绳 |
(Braided nylon cord with unspecified dimensional stability for aerospace purposes) |
| BS 3F 63-1981 |
飞机用低压氧气软管规范 |
(Specification for low pressure oxygen hose for aeronautical purposes) |
| BS 3F 65-1991 |
航空飞机用氧气和空气输送挠性波纹管(天然或合成聚异戊二烯)规范 |
(Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene)) |
| BS 3F 69-1979 |
硫化橡胶产品包装标志规范 |
(Specification for packaging and identification of vulcanized rubber items) |
| BS 3F 70-1991 |
重型编织橡皮绳规范 |
(Specification for heavy duty braided rubber cord) |
| BS 3F 71-1991 |
轻型橡胶编织软索规格 |
(Specification for light duty braided rubber cord) |
| BS 3G 100-1-1973 |
航空用设备的一般要求规范.第1部分:标志说明 |
(Specification for general requirements for equipment for use in aircraft - Identification and declarations) |
| BS 3G 100-2.2-1972 |
航空用设备的一般要求规范.第2部分:各种设备.第2节:磁效应 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Magnetic influence) |
| BS 3G 100-2.3.0-1972 |
航空用设备的一般要求规范.各种设备.环境条件.标准试验要求 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Standard test requirements) |
| BS 3G 100-2.3.1-1969 |
航空用设备的一般要求规范.各种设备.环境条件.振动 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Vibration) |
| BS 3G 100-2.3.10-1974 |
航空用设备的一般要求规范.第2部分:各种设备.第3节:环境条件.第10小节:碰撞冰 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Impact icing) |
| BS 3G 100-2.3.11-1973 |
航空用设备的一般要求规范.第2部分:各种设备.第3节:环境条件.第11小节:防水性 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Water-proofness) |
| BS 3G 100-2.3.12-1991 |
航空用设备的一般要求规范.各种设备.环境条件.流体污染 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Fluid contamination) |
| BS 3G 100-2.3.13-1973 |
航空用设备的一般要求规范.第2部分:各种设备.第3节:环境条件.第13小节:规定防火区的防火性 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Resistance to fire in designated fire zones) |
| BS 3G 100-2.3.14-1973 |
航空用设备的一般要求规范.第2部分:各种设备.第3节:环境条件.第14小节:声震 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Acoustic vibration) |
| BS 3G 100-2.3.15-1978 |
航空用设备的一般要求规范.第2部分:各种设备.第3节:环境条件.第15小节:温度变化 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Change of temperature) |
| BS 3G 100-2.3.2-1970 |
航空用设备的一般要求规范.各种设备.环境条件.温度压力要求 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Temperature-pressure requirements) |
| BS 3G 100-2.3.3-1972 |
航空用设备的一般要求规范.各种设备.环境条件.霉菌生长 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Mould growth) |
| BS 3G 100-2.3.4-1972 |
航空用设备的一般要求规范.各种设备.环境条件.压差要求 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Differential pressure requirements) |
| BS 3G 100-2.3.5-1972 |
航空用设备的一般要求规范.第2部分:各种设备.第3节:环境条件.第5小节:防爆性 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Explosion-proofness) |
| BS 3G 100-2.3.6-1972 |
航空用设备的一般要求规范.第2部分:各种设备.第3节:环境条件.第6小节:加速度要求 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Acceleration requirements) |
| BS 3G 100-2.3.7-1972 |
航空用设备的一般要求规范.各种设备.环境条件.热带环境 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Tropical exposure) |
| BS 3G 100-2.3.8-1972 |
航空用设备的一般要求规范.各种设备.环境条件.盐雾 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Salt mist) |
| BS 3G 100-2.3.9-1972 |
航空用设备的一般要求规范.各种设备.环境条件.结冰 |
(Specification for general requirements for equipment for use in aircraft - All equipment - Environmental conditions - Ice formation) |
| BS 3G 100-3-1979 |
航空用设备的一般要求规范.第3部分:航空供电的特性 |
(Specification for general requirements for equipment for use in aircraft - Characteristics of aircraft electrical power supplies) |
| BS 3G 100-4.1-1973 |
航空用设备的一般要求规范.第4部分:电气设备.第1节:结构和总则.第1小节:电绝缘试验 |
(Specification for general requirements for equipment for use in aircraft - Electrical equipment - Construction and general) |
| BS 3G 100-4.1.1-1982 |
飞机用设备的一般要求规范.电气设备.结构和总则.电绝缘试验 |
(Specification for general requirements for equipment for use in aircraft - Electrical equipment - Construction and general - Electrical insulation tests) |
| BS 3G 100-4.2-1980 |
航空用设备的一般要求规范.第4部分:电气设备.第2节:无线电和音频的电磁干扰 |
(Specification for general requirements for equipment for use in aircraft - Electrical equipment - Electromagnetic interference at radio and audio frequencies) |
| BS 3G 101-1987 |
机械和机电式航空指示仪的一般要求规范 |
(Specification for general requirements for mechanical and electromechanical aircraft indicators) |
| BS 3G 148-1981 |
飞机一般用途的铂温度传感器规范 |
(Specification for general purpose platinum temperature sensors for aircraft) |
| BS 3G 197-1982 |
飞机用电缆终端的柱式接线板规范 |
(Specification for stud-type terminal blocks for terminations on aircraft electric cables) |
| BS 3G 198-2-1997 |
飞行器电缆和设备线用套管.识别用活动套管说明 |
(Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes) |
| BS 3G 198-4-1996 |
航空电缆和设备电线用套.第4部分:粘结和绝缘用碳氟化合物热收缩套管规范 |
(Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation) |
| BS 3G 210-1996 |
单芯和多芯镀银铜导体(190℃)或镀镍铜导体(260℃)PTFE绝缘设备软线和电缆规范 |
(Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 鳦) or nickel plated copper conductors (260 鳦)) |
| BS 3G 231-1997 |
普通飞机用电缆和航空航天设备用导电体规范 |
(Specification for conductors for general-purpose aircraft electrical cables and aerospace applications) |
| BS 3G 233-1990 |
普通机体或设备互连用(135℃)挤制绝缘电缆规范 |
(Specification for electric cables for general airframe or equipment interconnect use (135 鳦), extruded insulation) |
| BS 3HR 100-1978 |
可锻耐热合金的检验和试验规程 |
(Procedure for inspection and testing of wrought heat-resisting alloys) |
| BS 3HR 601-1989 |
制造紧固件(最大直径或较小截面尺寸为30mm)用镍-铬-钛-铝耐热合金棒材和线材(镍基Cr19.5、Ti2.2、Al1.4)规 |
(Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 30 mm)(nickel base Cr 19.5, Ti 2) |
| BS 3J 12-1991 |
压敏胶粘识别带规范 |
(Specification for pressure-sensitive adhesive identification tape) |
| BS 3L 122-1970 |
镁-铝(8)-锌(0.5)-锰(0.3)合金铸锭和铸件规范(溶液处理) |
(Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)) |
| BS 3L 124-1970 |
镁-铝(10)-锌(0.5)-锰(0.3)合金铸锭和铸件规范(溶液处理) |
(Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated)(Al 10, Zn 0.5, Mn 0.3)) |
| BS 3L 125-1970 |
镁-铝(10)-锌(0.5)-锰(0.3)合金铸锭和铸件规范(溶液处理和沉淀处理) |
(Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3)) |
| BS 3L 51-1970 |
铝-硅(2.5)-铜(1.2)-镍(1.0)-镁(0.1)-铁(1.0)合金铸锭和铸件规范(沉淀热处理) |
(Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated)(Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)) |
| BS 3L 63-1971 |
铝铜镁硅锰合金管规范(溶解和沉降处理)(铜4.4,镁0.5,硅0.7,锰0.8) |
(Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)) |
| BS 3L 78-1970 |
铝-硅(5)-铜(1.2)-镁(0.5)合金铸锭和铸件规范(溶液处理和热处理) |
(Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)) |
| BS 3L 80-1985 |
铝-镁2.25%合金搴痛墓娣回火号为0) |
(Specification for sheet and strip of aluminium-2) |
| BS 3L 81-1985 |
铝-镁2.25%合金薄板材和带材规范(回火号为H16或H26) |
(Specification for sheet and strip of aluminium-2) |
| BS 3L 86-1971 |
铝-铜(2.5)-镁(0.3)合金冷锻铆钉用实心钢丝规范(直径不超过10mm) |
(Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)) |
| BS 3M 45-2-1998 |
飞行器轮胎和轮辋.轮胎的试验方法 |
(Aircraft tyres and rims - Test methods for tyres) |
| BS 3M 60-1998 |
液体系统用24度锥形可分开管道配件.通用规范 |
(Separable tube fittings for fluid systems, 24 ?cone - General specification) |
| BS 3N 3-2000 |
飞行器用供氧装置 |
(Breathing oxygen for airborne applications) |
| BS 3S 102-1969 |
碳钼钢(仅供锻造螺栓用的棒材)规范 |
(Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only)) |
| BS 3S 105-1969 |
碳素钢规范(仅供锻造螺栓用的棒材) |
(Specification for carbon steel (bar for the manufacture of forged bolts only)) |
| BS 3S 132-1976 |
含3%铬-钼-钒钢坯、棒材、锻件及零件规范.(1320-1470MPa;限定等圆断面70mm)(适用于氮化) |
(Specification - 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding)) |
| BS 3S 144-1995 |
铬-镍-铜-钼耐腐蚀(沉淀硬化)钢坯,棒材,锻件和部件(1130-1130MPa)规范 |
(Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)) |
| BS 3S 145-1996 |
铬-镍-铜-钼耐腐蚀钢(沉淀硬化)方坯、棒材、锻件及零件规范(1270-1470MPa) |
(Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)) |
| BS 3S 500-1996 |
钢板和钢带检验、试验及验收程序 |
(Procedure for inspection, testing and acceptance of steel sheet and strip) |
| BS 3S 61-1964 |
航空材料规范.含12%铬耐腐蚀钢(35/45吨力/平方英寸:限定等圆断面6英寸) |
(Specification for aircraft material - 12 per cent chromium corrosion-resisting steel (35/45 tonf/sq in: limiting ruling section 6 in)) |
| BS 3S 62-1964 |
航空材料规范.含12%铬耐腐蚀钢(45/55吨力/平方英寸限定等圆断面6英寸) |
(Specification for aircraft material - 12 per cent chromium corrosion-resisting steel (45/55 tonf/sq in: limiting ruling section 6 in)) |
| BS 3S 91-1977 |
低碳钢方坯、棒材、锻件和零件规范(适于轴瓦外壳) |
(Specification for mild steel billets, bars, forgings and parts (suitable for bearing shells)) |
| BS 3S 95-1967 |
含1 |
(Specification for 1) |
| BS 3SP 168-169-2002 |
航空航天用的编织橡胶绳外用套管和组合金属丝 |
(Ferrules and assembly wires for braided rubber cord assemblies for aerospace use) |
| BS 3SP 170-171-2002 |
航空航天用编织橡胶绳组件 |
(Braided rubber cord assemblies for aerospace use) |
| BS 3SP 3-1943 |
航空材料规范.叉形接头(低强度型)(尺寸自N0.4B.A至) |
(Specification for aircraft material - Fork joints (low tensile type) (for sizes No. 4 B.A. to) |
| BS 3SP 89-1983 |
飞机机架轴承的特性、限定尺寸及静荷载等级规范 |
(Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings) |
| BS 3T 51-1945 |
飞机机架轴承的特性、限定尺寸及静荷载等级规范 |
(Specification for aircraft material - High pressure seamless copper tubes) |
| BS 3T 53-1980 |
铬-钼钢管规范(700MPa)(管外径不小于12.5mm)(可焊接) |
(Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)) |
| BS 3T 60-1980 |
铬-钼钢管规范(1150MPa)(最大厚度8mm) |
(Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)) |
| BS 3V 4-1929 |
航空材料规范.槐木 |
(Specification for aircraft material - Ash) |
| BS 4-1-1993 |
结构钢型材.热轧型钢规范 |
(Structural steel sections - Specification for hot-rolled sections) |
| BS 4-1-2005 |
结构钢型材.热轧型钢的规范 |
|
| BS 4000-1-1990 |
纸和纸板的尺寸.第1部分:书写纸和某些印刷品的A系列和B系列切边尺寸规范 |
(Sizes of paper and board - Specification for A and B series of trimmed sizes of writing paper and certain classes of printed matters) |
| BS 4001-1-1998 |
水下呼吸装置的维护和保养.压缩空气开路式装置推荐标准 |
(Care and maintenance of underwater breathing apparatus - Recommendations for the compressed air open circuit type) |
| BS 4001-2-1967 |
水下呼吸装具的维护和保养.第2部分:标准潜水装置 |
(Care and maintenance of underwater breathing apparatus - Standard diving equipment) |
| BS 4006-1992 |
手动方头套筒扳手和附件规范 |
(Specification for hand operated square drive socket wrenches and accessories) |
| BS 4008-1992 |
牲畜栅栏规范 |
(Specification for cattle grids) |
| BS 4009-1991 |
助听器及听力计中骨传导振动器校准用仿真乳突规范 |
(Specification for artificial mastoids for the calibration of bone vibrators used in hearing aids and audiometers) |
| BS 4016-1997 |
柔性建筑用薄膜材料(通气型)规范 |
(Specification for flexible building membranes (breather type)) |
| BS 4018-1966 |
最大组合提升力为25T的钢丝绳滑轮组规范 |
(Specification for pulley blocks for use with wire rope for a maximum lift of 25 tonf in combination) |
| BS 4019-3-1993 |
旋转钻芯设备规范.A系统规范:米制单位 |
(Rotary core drilling equipment - Specification for System A. Metric units) |
| BS 4019-4-1993 |
旋转钻芯设备规范.A系统规范:英制单位 |
(Rotary core drilling equipment - Specification for System A. Inch units) |
| BS 4019-5-1999 |
旋转钻芯设备.旋转钻心设备.钢绳金刚石钻孔设备规范.A系统:米制单位 |
(Rotary core drilling equipment - Rotary core drilling equipment - Specification for wireline diamond drilling equipment - System A. Metric units) |
| BS 4022-1970 |
预制石膏墙板镶板规范 |
(Specification for prefabricated gypsum wallboard panels) |
| BS 4023-1975 |
软微孔聚氯乙烯片材规范 |
(Specification for flexible cellular PVC sheeting) |
| BS 4024-1966 |
五氯苯基月桂酸规范 |
(Specification for pentachlorophenyl laurate) |
| BS 4027-1996 |
耐硫酸盐水泥的规范 |
(Specification for sulfate-resisting Portland cement) |
| BS 4029-1978 |
测定单纤维与长纤维拉伸弹性恢复力的试验方法(等速伸长试验机) |
(Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines)) |
| BS 4031-1966 |
X 射线防护用铝玻璃规范 |
(Specification for X-ray protective lead glasses) |
| BS 4032-1978 |
纤维素纤维或合成纤维、纱线及织物或由这些纤维混纺的纱线及织物中水溶性或碱溶性添加剂测定的试验方法 |
(Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres) |
| BS 4034-1990 |
上釉餐具规范 |
(Specification for vitrified hotelware) |
| BS 4040-2001 |
机动车辆用加铅汽油规范 |
(Specification for leaded petrol (gasoline) for motor vehicles) |
| BS 4043-1989 |
根部带土移栽树推荐标准 |
(Recommendations for transplanting root-balled trees) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com