标准号 |
中文名称 |
英文名称 |
| BS ISO 16820-2004 |
感官分析.方法学.顺序分析 |
|
| BS ISO 16862-2003 |
色漆和清漆.抗凹陷性评定 |
(Paints and varnishes - Evaluation of sag resistance) |
| BS ISO 16869-2002 |
塑料.塑料成份中抑真菌化合物效果的评定 |
Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations |
| BS ISO 16873-2002 |
液压流体传动力.压力开关.安装表面 |
Hydraulic fluid power - Pressure switches - Mounting surfaces |
| BS ISO 16874-2004 |
液压传动.歧管及其件的标识 |
|
| BS ISO 16881-1-2005 |
起重机.轨道轮和相关触轮滑轨支撑结构的设计计算.总则 |
|
| BS ISO 16889-2000 |
液压传动过滤器.评价过滤器件过滤性能的多路法 |
Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element |
| BS ISO 16902-1-2003 |
液压传动.用声强法测定声功率级的试验规程.工程法.泵 |
(Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps) |
| BS ISO 16915-2004 |
铸模用工具.直浇口拉出器 |
|
| BS ISO 16916-2004 |
压模工具.注模工具规格单 |
|
| BS ISO 16929-2003 |
塑料.在中间试剂试验中明确的堆肥处理的条件下塑料的分解度的测定 |
Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
| BS ISO 1700-1995 |
电影技术.8mmS型电影原片.剪切和穿孔尺寸 |
Cinematography - 8 mm type S motion-picture raw stock film - Cutting and perforating dimensions |
| BS ISO 17053-2005 |
钢和铁.氧测定.经惰性气体熔化后的红外线方法 |
|
| BS ISO 17058-2004 |
钢铁.砷含量的测定.分光光度法 |
|
| BS ISO 17081-2004 |
氢渗透的测量方法和用电化学法测定金属中的氢吸收和迁移 |
|
| BS ISO 17082-2004 |
气压传动.阀.供货商文件中的数据 |
|
| BS ISO 17101-2004 |
农用机械.转式和甩刀式割草机.抛掷物体试验和验收标准 |
|
| BS ISO 17126-2005 |
土质.污染物对土壤植物群影响的测定.莴苣出苗的筛选试验(莴苣L.) |
|
| BS ISO 17126-2005 |
土质.污染物对土壤植物影响的测定.莴苣出苗的筛选方法(莴苣L.) |
|
| BS ISO 17155-2003 |
土质.用呼吸曲线测定土壤植物群的个体密度和活性 |
Soil quality - Determination of abundance and activity of soil microflora using respiration curves |
| BS ISO 17166-2000 |
红斑参考作用光谱和标准红斑剂量 |
Erythema reference action spectrum and standard erythema dose |
| BS ISO 17202-2002 |
纺织品.单丝纱捻度的测定.松劲和上劲法 |
Textiles - Determination of twist in single spun yarns - Untwist/retwist method |
| BS ISO 17239-2004 |
水果、蔬菜及其产品.砷含量的测定.氢化原子吸收光谱法 |
|
| BS ISO 17240-2004 |
水果和蔬菜制品.锡含量的测定.火焰原子吸收光谱法 |
|
| BS ISO 17247-2005 |
煤.最终分析 |
|
| BS ISO 17266-2002 |
电影.35mm电影胶片上多通道逻辑数字声控图片和负片,以及70mm电影胶片上数字声控图片和负片.正片和宽度尺寸 |
(Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints) |
| BS ISO 17281-2002 |
在适度高负载速度下(GDOWNiDOWNc 和 KDOWNiDOWNc)抗断裂韧性的测定 |
Plastics - Determination of fracture toughness (GDOWNiDOWNc and KDOWNiDOWNc) at moderately high loading rates (1 m/s) |
| BS ISO 17282-2004 |
塑料.设计数据的获取和表示指南 |
|
| BS ISO 17282-2004 |
塑料.设计数据的获取和表示指南 |
|
| BS ISO 17288-1-2002 |
乘用车.无级驾驶.操纵断开回路试验方法 |
Passenger cars - Free-steer behaviour - Steering-release open-loop test method |
| BS ISO 17288-2-2004 |
乘用车.无级变速性能.转向脉冲开环试验方法 |
|
| BS ISO 17294-1-2004 |
水质.感应耦合等离子体质谱法(ICP-MS)的应用.通用指南 |
|
| BS ISO 17313-2004 |
土质.使用软壁渗透仪测定饱和多孔材料的水渗导性 |
|
| BS ISO 17331-2005 |
表面化学分析.从硅片工作标准物质表面采集素的化学方法及其全反射X射线荧光光谱法的测定 |
|
| BS ISO 17332-2001 |
电影摄影.印制在35mm移动彩印胶片的生产商的图像识别信息 |
Cinematography - Manufacturer printed latent image identification information for 35mm motion-picture colour-print film - Specifications |
| BS ISO 17339-2003 |
船舶和海上技术.救生艇和救生船用海锚 |
(Ships and marine technology - Sea anchors for survival craft and rescue boats) |
| BS ISO 17353-2004 |
水质.选定的有机锡化合物的测定.气相色谱法 |
|
| BS ISO 17355-2003 |
航天数据和信息传送系统.CCSDS文件送协议 |
(Space data and information transfer systems - CCSDS file delivery protocol) |
| BS ISO 17355-2004 |
航天数据和信息传送系统.CCSDS文件送协议 |
|
| BS ISO 17355-2004 |
航天数据和信息传送系统.CCSDS文件送协议 |
|
| BS ISO 17356-2-2005 |
道路车辆.嵌入式机动车装置用开放式界面.连接OS、COM和NM的OSEK/VDX规范 |
|
| BS ISO 17357-2003 |
船舶和海上技术.高压浮式充气橡胶护舷材 |
(Ships and marine technology - High-pressure floating pneumatic rubber fenders) |
| BS ISO 17359-2004 |
机器的工况监测和诊断.通用指南 |
|
| BS ISO 1738-2004 |
黄油.盐含量的测定 |
|
| BS ISO 17380-2005 |
土质.易释放的氰化物和氰化物总含量的测定.连续流量分析法 |
|
| BS ISO 17398-2004 |
安全颜色和安全信号.安全信号的分类、特性和持久性 |
|
| BS ISO 17399-2004 |
航天系统.人机集成 |
|
| BS ISO 17410-2001 |
食品和动物饲料的微生物学.psychrotrophic微生物计数的水平方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of psychrotrophic micro-organisms |
| BS ISO 17422-2002 |
塑料.环境问题.标准中环境问题一般导则 |
Plastics - Environmental aspects - General guidelines for their inclusion in standards |
| BS ISO 17432-2005 |
医疗信息学.文电和通信.DICOM持续对象的网上存取 |
|
| BS ISO 17433-2003 |
航天数据和信息传送系统.数据包遥测业务 |
(Space data and information transfer systems - Packet telemetry services) |
| BS ISO 17470-2004 |
微电子束分析.电子探测微观分析.用波长色散X射线光谱测定法定性点分析指南 |
|
| BS ISO 17493-2001 |
耐热服装和设备.用热空气循环炉做耐对流热试验的试验方法 |
Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven |
| BS ISO 17497-1-2004 |
声学.表面的声音扩散特性.混响室中无规入射扩散系数的测量 |
|
| BS ISO 17531-2002 |
摄影.冲卷药液.4-(N-乙基-N-2甲基磺酰氨乙基)2-甲苯二胺倍半硫酸盐水化合物的规范 |
Photography - Processing chemicals - Specifications for 4-(N-ethyl-N-2- methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate |
| BS ISO 1754-1998 |
摄影技术.使用35mm胶片和卷筒软片制版的照相机.画面尺寸 |
Photography - Cameras using 35 mm film and roll film - Picture sizes |
| BS ISO 17555-2003 |
塑料.薄膜和薄板.双轴向取向的聚丙烯(PP)薄膜 |
(Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films) |
| BS ISO 17556-2003 |
塑料.通过测量呼吸计中的需氧量或放出的二氧化碳量来测定土壤中的最大好氧生物降解能力 |
(Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved) |
| BS ISO 17557-2003 |
塑料.薄膜和薄板.铸造的聚丙烯(PP)薄膜 |
(Plastics - Film and sheeting - Cast polypropylene (PP) films) |
| BS ISO 17559-2004 |
液压传动.电控液压泵.性能特征测定的试验方法 |
|
| BS ISO 17560-2002 |
表面化学分析.再生离子质量的光谱测定.硅中硼的深仿形方法 |
Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon |
| BS ISO 17564-2001 |
丁腈橡胶.通过碘值测定氢化丁腈橡胶中的剩余未饱和状态 |
Nitrile rubber - Determination of residual unsaturation in hydrogenated nitrile rubber (HNBR) by iodine value |
| BS ISO 17604-2003 |
食品和动物饲料的微生物学.微生物分析用尸体取样 |
(Microbiology of food and animal feeding stuffs - Carcass sampling for microbiological analysis) |
| BS ISO 1762-2002 |
纸、纸板和纸浆.在525℃燃烧时残留物(灰分)的测定 |
Paper, board and pulps - Determination of residue (ash) on ignition at 525 鳦 |
| BS ISO 17631-2002 |
船舶和航海技术.防火船板、救生器具和疏散设施 |
Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape |
| BS ISO 1766-1999 |
铺地织物.地毯底层上的毛绒厚度的测定 |
Textile floor coverings - Determination of thickness of pile above the substrate |
| BS ISO 17710-2002 |
塑料.在聚乙胺酯生产中用的聚合物.测定微型滴定法的不饱和等级 |
Plastics - Polyols for use in the production of polyurethane - Determination of degree of unsaturation by microtitration |
| BS ISO 17724-2003 |
图形符号.词汇 |
(Graphical symbols - Vocabulary) |
| BS ISO 17733-2004 |
工作场所空气.汞和无机汞化合物的测定.低温蒸气原子吸收光谱测定法或原子荧光光谱测定法 |
|
| BS ISO 17744-2004 |
塑料.作为温度和压力函数的比容的测定(pvT图).活塞装置法 |
|
| BS ISO 17771-2003 |
塑料.热固性模制化合物.SMC中纤维润湿程度的测定 |
(Plastics - Thermoset moulding compounds - Determination of the degree of fibre wetting in SMC) |
| BS ISO 17776-2001 |
石油和天然气工业.海上生产装置.危险识别和风险评定用工具和技术的导则 |
Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment |
| BS ISO 1781-1995 |
电影技术.直接正面放映用8mmS型电影胶片放映机的用法 |
Cinematography - Projector usage of 8 mm type S motion-picture film for direct front projection |
| BS ISO 1785-1996 |
电影技术.在穿孔8mm、S(1-4)型16mm电影胶片上拷贝的8mm、S型影像区.位置和尺寸 |
Cinematography - Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) - Position and dimensions |
| BS ISO 1787-1996 |
电影技术.8mmS型电影胶片电影摄影机的用法规范 |
Cinematography - Camera usage of 8 mm Type S motion-picture film - Specifications |
| BS ISO 17884-2004 |
船舶和海上技术.快艇用探照灯 |
|
| BS ISO 17899-2004 |
船舶和海上技术.船上窗用电刮水器 |
|
| BS ISO 17900-2002 |
农用挂车.平衡半悬挂式挂车.测定负荷、垂直负荷和轴承负荷 |
Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
| BS ISO 1793-2005 |
电影.16mm电影放映机用片夹(容量610m及以下:尺寸38cm).尺寸 |
|
| BS ISO 1795-2000 |
天然和合成生橡胶.取样和进一步的准备过程 |
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures |
| BS ISO 17973-2003 |
表面化学分析.中分辨率螺旋电子光谱仪.素分析用能量标度的校准 |
Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis |
| BS ISO 17974-2002 |
表面化学分析.高分辨率螺旋电子光谱仪.素和化学状态分析用能量标度的校准 |
Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis |
| BS ISO 17993-2002 |
水质.液体对液体萃取后用HPLC荧光检波在水中对15个多环芳香烃的测定 |
Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction |
| BS ISO 17997-1-2005 |
乳.酪蛋白氮含量测定.间接方法(参照法) |
|
| BS ISO 17997-2-2005 |
乳.酪蛋白氮含量测定.直接方法 |
|
| BS ISO 1803-1998 |
建筑结构.公差.尺寸精度的表示法.原则和术语 |
Building construction - Tolerances - Expression of dimensional accuracy - Principles and terminology |
| BS ISO 18054-2004 |
鸢尾根茎油.铁含量测定.毛细柱气相色谱法 |
|
| BS ISO 18054-2004 |
鸢尾根茎油.铁含量测定.毛细管柱气相色谱法 |
|
| BS ISO 18055-1-2004 |
摄影和成像.喷墨介质.分类、命名和尺寸.照片级介质(相纸和胶片) |
|
| BS ISO 18064-2003 |
热塑性弹性体.命名和缩写的术语 |
(Thermoplastic elastomers - Nomenclature and abbreviated terms) |
| BS ISO 18073-2004 |
水质.三氯至八氯二氧杂环乙烯和呋喃的测定.同位素稀释HRGC/HRMS法 |
|
| BS ISO 18114-2003 |
表面化学分析.次级离子质谱法.测定离子注入标样的相对灵敏系数 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials) |
| BS ISO 18115-2001 |
表面化学分析.词汇 |
Surface chemical analysis - Vocabulary |
| BS ISO 18118-2005 |
表面化学分析.俄歇电子光谱法和X射线光电子光谱法.同质材料定量分析用实验室测定相对敏感性系数的使用指南 |
|
| BS ISO 18164-2005 |
乘用车、卡车、公共汽车和摩托车轮胎.滚动阻力测量方法 |
|
| BS ISO 18165-2002 |
石油和天然气工业.水泥漂浮设备的性能试验 |
Petroleum and natural gas industries - Performance testing of cementing float equipment |
| BS ISO 1817-1999 |
硫化橡胶.液化效果的测定 |
Rubber, vulcanized - Determination of the effect of liquids |
| BS ISO 1830-2005 |
纸、纸板和纸浆.酸溶性锰的测定 |
|
| BS ISO 1832-2004 |
切削刀具用可转位刀片.名称与符号 |
|
| BS ISO 18329-2004 |
乳和乳制品.furosine含量的测定.离子对反相高效液相色谱法 |
|
| BS ISO 18333-2003 |
物料装卸用托盘.平板托盘用新木制部件的质量 |
Pallets for materials handling - Quality of new wooden components for flat pallets |
| BS ISO 18334-2003 |
材料运输用托盘.新的木制平托盘的组装质量 |
Pallets for materials handling - Quality of assembly of new, wooden, flat pallets |
| BS ISO 1834-1999 |
提升用短扁节链.验收的一般条件 |
Short link chain for lifting purposes - General conditions of acceptance |
| BS ISO 1837-2003 |
起重钩.命名 |
(Lifting hooks - Nomenclature) |
| BS ISO 18395-2005 |
动植物脂肪和油.用高效粒度排除色谱法(HPSEC)测定单酰甘油、二酰甘油、三酰甘油和丙三醇 |
|
| BS ISO 18413-2002 |
液压传动装置.零件和组件的清洁度.与长期收集、分析和数据报告相关的审核文件 |
Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting |
| BS ISO 18431-2-2005 |
机械振动和冲击.信号处理.傅里叶变换分析用时域窗 |
|
| BS ISO 18436-1-2004 |
机器的工况监测与诊断.人员的培训与认证要求.认证机构和认证过程的要求 |
|
| BS ISO 18553-2002 |
在聚烯烃管、配件和化合物中色料或炭黑分散程度的评定方法 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| BS ISO 18573-2003 |
输送带.试验大气和状态调节期 |
(Conveyor belts - Test atmospheres and conditioning periods) |
| BS ISO 18593-2004 |
食物和动物饲料的微生物学.使用接触板和拭子的表面取样技术的水平方法 |
|
| BS ISO 18649-2004 |
机械振动.桥梁动态试验和调查的测量结果的评价 |
|
| BS ISO 18653-2003 |
齿轮.单个齿轮测量仪器的评价 |
(Gears - Evaluation of instruments for the measurement of individual gears) |
| BS ISO 18669-1-2005 |
内燃机.活塞销.一般规范 |
|
| BS ISO 18669-2-2005 |
内燃机.活塞销.检验测量原理 |
|
| BS ISO 18738-2003 |
升降机(电梯).升降机提升质量测定 |
(Lifts (elevators) - Measurement of lift ride quality) |
| BS ISO 188-1998 |
硫化或热塑橡胶.加速老化或耐热性试验 |
Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests |
| BS ISO 18852-2005 |
橡胶配合料.多点氮表面积(NSA)和统计厚度表面积(STSA)的测定 |
|
| BS ISO 18857-1-2005 |
水质.所选烷基苯酚的测定.使用液-液萃取和带质量选择检测的气相色谱法的无过滤样品法 |
|
| BS ISO 1887-1995 |
纺织玻璃纤维.可燃物质含量的测定 |
Textile glass - Determination of combustible-matter content |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com