标准号 |
中文名称 |
英文名称 |
| BS ISO 21949-2004 |
涂布研磨材料.带有排尘孔的平片砂布 |
|
| BS ISO 21950-2004 |
砂布.平的圆盘砂布 |
|
| BS ISO 21951-2004 |
砂布.带有排尘孔的平的圆盘砂布 |
|
| BS ISO 21961-2003 |
航天数据和信息传输系统.数据实体字典规范语言(DEDSL).抽象语句 |
(Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - Abstract syntax) |
| BS ISO 21962-2003 |
航天数据和信息传输系统.数据实体字典规范语言(DEDSL).PVL语法 |
(Aerospace series - Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - PVL syntax) |
| BS ISO 22028-1-2004 |
摄影和图像技术.数字图像存储、操作和交换的扩展颜色编码.体系结构和要求 |
|
| BS ISO 22030-2005 |
土质.生物方法.高等植物的慢性毒性 |
|
| BS ISO 22048-2005 |
表面化学分析.静态次生离子质谱法的信息格式 |
|
| BS ISO 22090-1-2005 |
船舶和海上技术.传递航向装置(THDs).陀螺罗盘 |
|
| BS ISO 22090-2-2004 |
船舶和海上技术.发射导航装置(THDs).地磁原理 |
|
| BS ISO 22090-3-2004 |
船舶和海上技术.传递航向装置(THDs).GNSS原则 |
|
| BS ISO 2230-2002 |
橡胶产品.贮存导则 |
Rubber products - Guidelines for storage |
| BS ISO 22308-2005 |
软木塞.感官分析 |
|
| BS ISO 22368-1-2004 |
作物保护设备.清洁系统的评价试验方法.完全喷射装置的内部清洁 |
|
| BS ISO 22368-2-2004 |
作物保护设备.清洁系统的评价试验方法.喷射装置的外部清洁 |
|
| BS ISO 22368-2-2004 |
作物保护设备.清洁系统的评价试验方法.喷射装置的外部清洁 |
|
| BS ISO 22368-3-2004 |
作物保护设备.清洁系统的评价试验方法.容器的内部清洁 |
|
| BS ISO 2240-1993 |
摄影技术.照相彩色反转片.ISO感光度的测定 |
Photography - Colour reversal camera films - Determination of ISO speed |
| BS ISO 2240-2004 |
摄影.照相彩色反转片.ISO感光速度的测定 |
|
| BS ISO 2254-2004 |
丁香和丁香粉.规范 |
|
| BS ISO 226-2003 |
声学.标准等响曲线 |
(Acoustics - Normal equal-loudness-level contours) |
| BS ISO 22608-2004 |
防护服.液体化学试剂防护.防护服材料对液体农药配方的排斥、保持和渗透性的测量 |
|
| BS ISO 2261-1996 |
往复式内燃机.手操纵装置.运动的标准方向 |
Reciprocating internal combustion engines - Hand-operated control devices - Standard direction of motion |
| BS ISO 22641-2005 |
航天数据和信息传送系统.TM(遥测技术)同步和信道编码 |
|
| BS ISO 22642-2005 |
航天数据和信息传送系统.TC(遥测指令)同步和信道编码 |
|
| BS ISO 22643-2003 |
航天数据和信息传送系统.数据实体字典规范语言(DEDSL).XML/DTD语句 |
(Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - XML/DTD Syntax) |
| BS ISO 22646-2005 |
航天数据和信息传送系统.航天数据包协议 |
|
| BS ISO 22669-2004 |
空间数据和信息传输系统.空间链路扩展(SLE).全部回程帧(Return-all-frames)服务 |
|
| BS ISO 22702-2003 |
通用打火机.消费者安全一般要求 |
(Utility lighters - General consumer-safety requirements) |
| BS ISO 2285-2002 |
硫化或热塑橡胶.恒定拉长条件下拉伸强度的测定,恒定抗拉荷载下拉伸强度、拉长和蠕变的测定 |
Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
| BS ISO 22857-2005 |
健康信息学.数据保护以利于个人健康信息的国际间流动用指南 |
|
| BS ISO 22877-2004 |
脚轮和车轮.词汇、符号和多种语言术语 |
|
| BS ISO 22917-2005 |
超磨料.金刚石或立方氮化硼砂轮的极限偏差和跳动误差 |
|
| BS ISO 22972-2004 |
香精油.手性毛细管柱气相色谱法分析.一般方法 |
|
| BS ISO 23-1995 |
电影技术.35mm电影胶片的摄影机用法.规范 |
Cinematography - Camera usage of 35 mm motion picture film - Specifications |
| BS ISO 230-1-1997 |
机床验收规则.在空载或精加工状态下工作的机床几何精度 |
Test code for machine tools - Geometric accuracy of machines operating under no-load or finishing conditions |
| BS ISO 230-2-1998 |
机床测验规则.第2部分:定位用数字控制轴的精度和重复性的测定 |
Test code for machine tools - Determination of accuracy and repeatability of positioning of numerically controlled machine tool axes |
| BS ISO 230-3-2001 |
机床试验规程.热效果的测定 |
Test code for machine tools - Determination of thermal effects |
| BS ISO 230-4-1997 |
机床验收规则.数控机床的循环测试 |
Test code for machine tools - Circular tests for numerically controlled machine tools |
| BS ISO 230-5-2000 |
机床试验规范.噪声排放的测定 |
Test code for machine tools - Determination of the noise emission |
| BS ISO 230-6-2002 |
机床试验规范.身体和脸对角线上的精确位置的测定 |
Test code for machine tools - Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests) |
| BS ISO 2302-2005 |
异丁烯-异戊二烯橡胶(IIR).评价规程 |
|
| BS ISO 2303-2003 |
异戊橡胶(IR).非充油,溶液聚合型橡胶.评定规程 |
Isoprene rubber (IR) - Non-oil-extended, solution-polymerized types - Evaluation procedure |
| BS ISO 23079-2005 |
镁和镁合金.回炉料.要求、分类和验收 |
|
| BS ISO 2328-1996 |
叉车.钩接式叉臂和叉臂托架.安装尺寸 |
Fork lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions |
| BS ISO 2330-2002 |
叉式起重车.叉形臂.技术特性和试验 |
Fork-lift trucks - Fork arms - Technical characteristics and testing |
| BS ISO 2344-1999 |
道路车辆.带锥形底座M14×1.25火花塞及其汽缸盖壳 |
Road vehicles - M14 x 1,25 spark plugs with conical seating and their cylinder head housings |
| BS ISO 2346-2002 |
道路车辆.带平底座的19mm六角形的M14×1.25小型火花塞及其汽缸盖座孔 |
Road vehicles - M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| BS ISO 2351-1-2002 |
螺钉和螺母用装配工具.机动螺丝刀杆.一字槽螺钉用螺丝刀杆 |
Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for slotted head screws |
| BS ISO 2351-2-2002 |
螺钉和螺母用装配工具.机动螺丝刀杆.十字槽凹头螺钉用螺丝刀杆 |
Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for cross-recessed head screws |
| BS ISO 2351-3-2002 |
螺钉和螺母用装配工具.机动螺丝刀杆.六角内孔螺丝用螺丝刀杆 |
Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for hexagon socket screws |
| BS ISO 23529-2004 |
橡胶.物理试验方法用试件的准备和调节用一般规程 |
|
| BS ISO 23529-2004 |
橡胶.物理试验方法用试件的准备和调节用一般规程 |
|
| BS ISO 23603-2005 |
颜色的视觉鉴定和测量用日光模拟器光谱质量评估的标准方法 |
|
| BS ISO 2382-10-1990 |
数据处理词汇.第10部分:操作技术和设施 |
Data processing - Vocabulary - Operating techniques and facilities |
| BS ISO 2382-12-1990 |
信息处理系统.词汇.第12部分:外围设备 |
Information processing systems - Vocabulary - Peripheral equipment |
| BS ISO 2382-13-1990 |
数据处理.词汇.第13部分:计算机图解 |
Data processing vocabulary - Computer graphics |
| BS ISO 2382-14-1990 |
数据处理词汇.第14部分:可靠性、维护和利用 |
Information technology - Vocabulary - Reliability, maintenance and availability |
| BS ISO 2382-15-1990 |
数据处理.词汇.程序语言 |
Data processing - Vocabulary - Programming languages |
| BS ISO 2382-18-1990 |
信息处理系统.词汇.第18部分:模拟计算 |
Information processing systems - Vocabulary - Distributed data processing |
| BS ISO 2382-19-1990 |
信息处理系统词汇.模拟计算 |
Information processing systems - Vocabulary - Analog computing |
| BS ISO 2382-1990 |
信息处理系统.词汇.模拟计算 |
Information processing systems. Vocabulary. Analog computing |
| BS ISO 2382-2-1990 |
数据处理.词汇.第2节:算术和逻辑运算 |
Data processing - Vocabulary - Arithmetic and logic operations |
| BS ISO 2382-21-1990 |
数据处理词汇.第21部分:过程控制计算机系统和技术过程之间的接口.两种语言版 |
Data processing - Vocabulary - Interfaces between process computer systems and technical processes |
| BS ISO 2382-22-1990 |
信息处理系统.词汇.第22部分:计算器 |
Information processing systems - Vocabulary - Calculators |
| BS ISO 2382-3-1990 |
信息处理系统.词汇.第3部分:设备技术 |
Information processing systems - Vocabulary - Equipment technology |
| BS ISO 2382-4-1990 |
信息处理系统.词汇.第4部分:数据编制 |
Information processing systems - Vocabulary - Organization of data |
| BS ISO 2382-5-1990 |
信息处理系统.词汇.第5部分:数据表示法 |
Information processing systems - Vocabulary - Representation of data |
| BS ISO 2382-6-1990 |
信息处理系统.词汇.第6部分:数据准备与处理 |
Information processing systems - Vocabulary - Preparation and handling of data |
| BS ISO 2382-8-1990 |
信息处理系统.词汇.第8部分:控制、完整性和安全性 |
Information technology - Vocabulary - Control, integrity and security |
| BS ISO 2385-1994 |
软木厚板,原软木,洁净软木塞,软木片,软木屑及软木废渣.湿度测定取样 |
Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste - Sampling to determine moisture content |
| BS ISO 2407-1998 |
卧式内圆磨床的试验条件.精度试验 |
Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy |
| BS ISO 2421-2003 |
砂布.桶形砂套 |
(Coated abrasives - Cylindrical sleeves) |
| BS ISO 24237-2005 |
表面化学分析.X射线光电子光谱学.强度标的可重复性和稳定性 |
|
| BS ISO 24336-2005 |
层压地板覆盖物.部分浸水后的厚度膨胀测定 |
|
| BS ISO 246-1995 |
滚动轴承.滚柱轴承,分离式止推环.外形尺寸 |
Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions |
| BS ISO 2467-2004 |
电影.65 mm/5穿孔电影摄影机片窗新形成的画面区域和70 mm/5穿孔电影拷贝的最大可放映画面区域.位置和尺寸 |
|
| BS ISO 2470-2000 |
纸、纸板和纸浆.蓝光漫反射因数的测定(ISO 亮度) |
Paper, board and pulps - Measurement of diffuse blue reflectance factor (ISO brightness) |
| BS ISO 2471-1998 |
纸和纸板.不透明度(纸背)的测定.漫反射法 |
Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method |
| BS ISO 2475-2000 |
氯丁橡胶(CR).一般用途.评价方法 |
Chloroprene rubber (CR) - General-purpose types - Evaluation procedure |
| BS ISO 248-2005 |
生橡胶.挥发物含量的测定 |
|
| BS ISO 25-1995 |
电影摄影.16mm电影摄影胶片摄影机规范 |
Cinematography - Camera usage of 16 mm motion picture film specification |
| BS ISO 251-2003 |
带织物绕线架的输送带.宽度和长度 |
(Conveyor belts with textile carcass - Widths and lengths) |
| BS ISO 2534-1998 |
道路车辆.发动机试验规范.总功率 |
Road vehicles - Engine test code - Gross power |
| BS ISO 254-1998 |
皮带传动.皮带轮.质量、精整和平衡 |
Belt drives - Pulleys - Quality, finish and balance |
| BS ISO 25539-1-2003 |
心血管植入物.血管内装置.血管内修复术 |
(Cardiovascular implants - Endovascular devices - Endovascular prostheses) |
| BS ISO 2559-2001 |
纺织玻璃纤维.垫子(裁截或连续的多股线制).名称与符号和基本规范 |
Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications |
| BS ISO 257-2004 |
农药和其他农用化学制品.通用名称的选择准则 |
|
| BS ISO 2575-2004 |
道路车辆.操纵件、指示器和信号装置的符号 |
|
| BS ISO 2580-2-1995 |
塑料.丙烯腈-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料.试样制备和性能测定 |
Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determination of properties |
| BS ISO 2596-1995 |
铁矿石.分析试样中吸湿的测定.重量法和卡尔费舍尔(Karl fisher)法 |
Iron ores - Determination of hygroscopic moisture in analytical samples - Gravimetric and Karl Fischer methods |
| BS ISO 2597-1-1995 |
铁矿石.铁的总含量的测定.氯化锡还原后用滴定法 |
Iron ores.Determination of total iron content - Titrimetric method after tin (II) chloride reduction |
| BS ISO 2599-2003 |
铁矿石.磷含量的测定.滴定法 |
(Iron ores - Determination of phosphorus content - Titrimetric method) |
| BS ISO 26-1995 |
电影技术.直接正面放映16mm的电影放映机的用法规范 |
Cinematography - Projector usage of 16 mm motion-picture films for direct front projection - Specifications |
| BS ISO 261-1999 |
ISO普通米制螺纹.一般轮廓图 |
ISO general purpose metric screw threads - General plan |
| BS ISO 262-1999 |
ISO普通米制螺纹.螺钉,螺栓和螺母的选用尺寸 |
ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts |
| BS ISO 2631-4-2001 |
机械振动和冲击.对人体受全身振动的评估.在固定导轨运输系统中振动和转动对乘客和乘务员舒适度影响的评估导则 |
Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Guidelines for the evaluation of the effects of vibration and rotational motion on passengers and crew comfort in fixed-guideway transport systems |
| BS ISO 2692-2000 |
技术图纸.几何公差.最大实体原则 |
Technical drawings - Geometrical tolerancing - Maximum material principle |
| BS ISO 2697-2000 |
柴油发动机.燃料喷嘴.S规格 |
Diesel engines - Fuel nozzles - Size S |
| BS ISO 2704-1998 |
道路车辆.平底座M10×1火花塞和其汽缸盖上的座孔 |
Road vehicles - M10 x 1 spark plugs with flat seating and their cylinder head housings |
| BS ISO 2705-2000 |
道路车辆.平基座的M12×1.25火花塞和汽缸盖体 |
Road vehicles - M12 x 1,25 spark plugs with flat seating and their cylinder head housings |
| BS ISO 2709-1997 |
信息和文献加工.信息交换格式 |
Information and documentation - Format for information interchange |
| BS ISO 2710-1-2000 |
往复式内燃机.词汇.发动机设计和运行术语 |
Reciprocating internal combustion engines - Vocabulary - Terms for engine design and operation |
| BS ISO 2710-2-2000 |
往复式内燃机.词汇.发动机维修术语 |
Reciprocating internal combustion engines - Vocabulary - Terms for engine maintenance |
| BS ISO 2725-3-2001 |
螺钉和螺母用装配工具.方形驱动套筒扳手.机器驱动套筒扳手(无冲击).尺寸 |
Assembly tools for screws and nuts - Square drive sockets - Machine-operated sockets (non-impact) - Dimensions |
| BS ISO 2758-2002 |
纸.碎裂强度的测定 |
Paper - Determination of bursting strength |
| BS ISO 2759-2002 |
纸板.碎裂强度的测定 |
Board - Determination of bursting strength |
| BS ISO 276-2002 |
色漆和清漆用粘合剂.亚麻籽油.试验要求和方法 |
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test |
| BS ISO 277-2002 |
色漆和清漆用粘合剂.原桐油.试验要求和方法 |
Binders for paints and varnishes - Raw tung oil - Requirements and methods of test |
| BS ISO 279-2001 |
香精油.在20℃时相对比重的测定.参照法 |
Essential oils - Determination of relative density at 20 鳦 - Reference method |
| BS ISO 280-2001 |
香精油.折射指数的测定 |
Essential oils - Determination of refractive index |
| BS ISO 2804-1997 |
金属丝,棒或管拉伸冲模.硬金属(碳化物)烧结小球.尺寸 |
Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions |
| BS ISO 2827-1995 |
摄影技术.电子闪光装置的光输出量的测定 |
Photography - Electronic flash equipment - Determination of light output and performance |
| BS ISO 2834-2002 |
印刷技术.胶印压印墨水的试验印刷准备 |
Graphic technology - Test print preparation for offset and letterpress inks |
| BS ISO 2836-2002 |
印刷技术.印刷品和油墨.对各种药剂耐性的评价 |
Graphic technology - Prints and printing inks - Assessment of resistance to various agents |
| BS ISO 2837-1996 |
图像技术.印刷品和油墨.耐溶剂性的评定法 |
Graphic technology - Prints and printing inks - Assessment of resistance to solvents |
| BS ISO 2846-1-1998 |
印刷技术.四色印刷用油墨的颜色和透明度.单张纸和热定印卷筒纸胶版印刷 |
(Graphic technology - Colour and transparency of ink sets for four-colour-printing - Sheet-fed and heat-set web offset lithographic printing) |
| BS ISO 2846-2-2001 |
印刷技术.四色印刷油墨的色彩和透明度.冷凝胶版印刷 |
Graphic technology - Colour and transparency of ink sets for four-colour-printing - Coldset offset lithographic printing |
| BS ISO 2846-4-2002 |
印刷技术.四色印刷油墨的色彩和透明度.网板印刷 |
Graphic technology - Colour and transparency of ink sets for four-colour-printing - Screen printing |
| BS ISO 289-4-2003 |
未硫化橡胶.用剪切圆盘型粘度计测定门尼应力松弛率 |
(Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Determination of the Mooney stress-relaxation rate) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com