标准号 |
中文名称 |
英文名称 |
BS EN 60269-2-1988 |
低压熔断器.专职人员使用的熔断器的补充要求 |
(Low-voltage fuses - Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)) |
BS EN 60269-3-1995 |
低压熔断器.非专业人员用熔断器的补充要求(主要是家用和类似用途用熔断器) |
(Low-voltage fuses - Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)) |
BS EN 60269-4-1-2002 |
低压熔断器.第4-1部分:半导体器件用熔断体的补充要求.第1-3节:标准化的熔断体类型实例 |
(Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices - Sections I to III: Examples of types of standardized fuse-links) |
BS EN 60269-4-1988 |
低压熔断器.半导体器件防护用熔断体的补充要求 |
(Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices) |
BS EN 60270-2001 |
高电压试验技术.部分放电测量 |
(High-voltage test techniques - Partial discharge measurements) |
BS EN 60276-1988 |
碳刷、刷握、换向器和滑环的定义和名称 |
(Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings) |
BS EN 60282-1-2002 |
高压熔断器.限流熔断器 |
(High-voltage fuses - Current-limiting fuses) |
BS EN 60286-1-1998 |
自动装卸件的包装.具有轴向连续带的件带状包装 |
(Packaging of components for automatic handling - Tape packaging of components with axial leads on continuous tapes) |
BS EN 60286-2-1998 |
自动装卸件的包装.具有非直接连续带的件带状包装 |
(Packaging of components for automatic handling - Tape packaging of components with unidirectional leads on continuous tapes) |
BS EN 60286-3-1998 |
自动装卸件的包装.连续带无定向件带状包装 |
(Packaging of components for automatic handling - Packaging of leadless components on continuous tapes) |
BS EN 60286-4-1998 |
自动控制用件的封装.E和G型包装件中密封电子件用粘附装料装置 |
Packaging of components for automatic handling - Stick magazines for electronic components encapsulated in packages of form E and G |
BS EN 60286-5-1997 |
件自动封装.第5部分:矩阵盘 |
Packaging of components for automatic handling - Matrix trays |
BS EN 60286-5-2004 |
自动装卸件的包装.矩阵盘 |
|
BS EN 60286-6-1999 |
自动装卸件的包装.表面固定件的大规模包装 |
(Packaging of components for automatic handling - Bulk case packaging for surface mounting components) |
BS EN 60286-6-2004 |
自动装配用件的包装.表面安装件的散装盒包装 |
|
BS EN 60286-6-2004 |
自动装配用件的包装.表面安装件的散装盒包装 |
|
BS EN 60289-1994 |
电抗器 |
Reactors |
BS EN 60296-2004 |
电工用液体.互感器和开关装置用未使用矿物绝缘油 |
|
BS EN 60297-4-1995 |
电气设备机械结构.482.6mm(19.in)系列机械结构件的尺寸.第4部分:分机架及相关插件.附加尺寸 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Additional dimensions |
BS EN 60297-5-100-2001 |
电子设备的机械结构.482.6mm(19in)系列的机械结构的尺寸.支架和相关插件.设计总览 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Design overview |
BS EN 60297-5-101-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.支架和相关插件.注入和抽提器柄 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Injector/extractor handle |
BS EN 60297-5-102-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.与插入件有关的电磁屏蔽条款 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Electromagnetic shielding provision |
BS EN 60297-5-103-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.支架和相关插件.静电放电保护 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Electrostatic discharge protection |
BS EN 60297-5-104-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.支架和相关插件.键控 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Keying |
BS EN 60297-5-105-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.支架和相关插件.定位销和/或接地销 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Alignments and/or earth pin) |
BS EN 60297-5-107-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.支架和相关插件.后背固定的插件 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Subracks and associated plug-in units - Rear mounted plug-in units |
BS EN 60298-1996 |
额定电压1KV以上至72.5KV(含)交流金属封闭开关和控制设备 |
A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
BS EN 60299-1994 |
家用电热毯.性能测量方法 |
Household electric blankets - Methods for measuring performance |
BS EN 603-1-1997 |
铝及铝合金.锻坯.检验和交货的技术条件 |
(Aluminium and aluminium alloys - Wrought forging stock - Technical conditions for inspection and delivery) |
BS EN 603-2-1997 |
铝及铝合金.锻坯.机械性能 |
(Aluminium and aluminium alloys - Wrought forging stock - Mechanical properties) |
BS EN 603-3-2000 |
铝及铝合金.锻坯.尺寸和形状公差 |
(Aluminium and aluminium alloys - Wrought forging stock - Tolerances on dimensions and form) |
BS EN 60300-1-2003 |
可靠性管理.可靠性管理系统 |
(Dependability management - Dependability management systems) |
BS EN 60300-2-2004 |
可靠性管理.可靠性管理指南 |
|
BS EN 60300-3-12-2004 |
可靠性管理.应用指南.集成逻辑支持 |
|
BS EN 60300-3-14-2004 |
可靠性管理.应用指南.维护和维护支持 |
|
BS EN 60300-3-14-2004 |
可靠性管理.应用指南.维护和维护支持 |
|
BS EN 60300-3-2-2005 |
可靠性管理.应用指南.现场收集可靠性数据 |
|
BS EN 60300-3-3-2004 |
可信性管理.应用指南.寿命周期成本 |
|
BS EN 60305-1996 |
标称电压1000V以上架空线用绝缘子.交流设备用陶瓷或玻璃绝缘子.盘形和针形悬式绝缘子串件的特性 |
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type |
BS EN 60309-1-1999 |
工业用插头、插座输出口和耦合器.一般要求 |
Plugs, socket-outlets and couplers for industrial purposes - General requirements |
BS EN 60309-2-1999 |
工业用途的插头、插座输出口和耦合器.管脚和接触导管附件尺寸的互换性要求 |
(Plugs, socket-outlets and couplers for industrial purposes - Dimensional interchangeability requirements for pin and contact-tube accessories) |
BS EN 60310-1997 |
铁路设施.铁道车辆上的牵引变压器和电感器 |
(Railway applications - Traction transformers and inductors on rolling stock) |
BS EN 60310-2004 |
铁路设施.铁道车辆上的牵引变压器和电感器 |
|
BS EN 60311-2003 |
家用和类似用途的电熨斗.性能测量的方法 |
(Electric irons for household or similar use - Methods for measuring performance) |
BS EN 60312-1998 |
家用真空吸尘器.性能测量的方法 |
(Vacuum cleaners for household use - Methods for measuring the performance) |
BS EN 60315-4-1998 |
各种发射级别的无线电接受机的测量方法.调频声音广播发射接受机 |
(Methods of measurement on radio receivers for various classes of emission - Receivers for frequency-modulated sound broadcasting emissions) |
BS EN 60315-7-1996 |
各种发射类别的无线电接收机的测量方法.第7部分:数字卫星接收机的测量方法 |
(Methods of measurement on radio receivers for various classes of emission - Methods of measurement on digital satellite radio (DSR) receivers) |
BS EN 60315-9-1997 |
各种发射类别的无线电接收机的测量方法.无线电数据系统接收特性测试 |
(Methods of measurement on radio receivers for various classes of emission - Measurement of the characteristics relevant to radio data system (RDS) reception) |
BS EN 60317-0-1-1998 |
特种绕组线规范.一般要求.漆包圆铜线 |
(Specification for particular types of winding wires - General requirements - Enamelled round copper wire) |
BS EN 60317-0-2-1998 |
特种绕组线规范.第0部分:一般要求.第1节:漆包圆铜线 |
(Specification for particular types of winding wires - General requirements - Enamelled rectangular copper wire) |
BS EN 60317-0-3-1998 |
特种绕组线规范.一般要求.漆包圆铝线 |
(Specification for particular types of winding wires - General requirements - Enamelled round aluminium wire) |
BS EN 60317-0-4-1998 |
特种绕组线规范.第0部分:一般要求.第1节:漆包圆铜线 |
(Specification for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire) |
BS EN 60317-0-5-1993 |
特种绕组线规范.一般要求.玻璃纤维编织的裸线或漆包扁铜线 |
(Specification for particular types of winding wires - General requirements - Glass-fibre braided, bare or enamelled rectangular copper wire) |
BS EN 60317-0-6-2001 |
特种绕组线规范.一般要求.玻璃纤维缠绕树脂或涂漆的裸露和漆包圆铜线 |
(Specification for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire) |
BS EN 60317-1-1993 |
特种绕组线规范.105级聚乙烯醇缩乙醛漆包圆铜线 |
(Specifications for particular types of winding wires - Polyvinyl acetal enamelled round copper wire, class 105) |
BS EN 60317-11-2000 |
特种绕组线规范.130级丝包的成束熔接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering) |
BS EN 60317-12-1993 |
特种绕组线规范.120级聚乙烯醇缩乙醛漆包圆铜线 |
(Specifications for particular types of winding wires - Polyvinyl acetal enamelled round copper wire, class 120) |
BS EN 60317-13-1993 |
特种绕组线规范.200级涂覆聚酰胺-酰亚胺的聚酯或聚酰胺酯漆包圆铜线 |
(Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200) |
BS EN 60317-14-1993 |
特种绕组线规范.105级聚乙烯醇缩乙醛漆包圆铝线 |
Specifications for particular types of winding wires - Polyvinyl acetal enamelled round aluminium wire, class 105 |
BS EN 60317-15-1993 |
特种绕组线规范.180级聚酰胺酯漆包圆铝线 |
(Specifications for particular types of winding wires - Polyesterimide enamelled round aluminium wire, class 180) |
BS EN 60317-15-2004 |
特种绕组线规范.聚酯酰亚胺漆包圆铝线(180级) |
|
BS EN 60317-16-1993 |
特种绕组线规范.155级聚酯漆包矩形铜线 |
(Specifications for particular types of winding wires - Polyester enamelled rectangular copper wire, class 155) |
BS EN 60317-17-1993 |
特种绕组线规范.105级聚乙烯醇缩乙醛漆包矩形铜线 |
(Specifications for particular types of winding wires - Polyvinyl acetal enamelled rectangular copper wire, class 105) |
BS EN 60317-18-1993 |
特种绕组线规范.120级聚乙烯醇缩乙醛漆包矩形铜线 |
(Specifications for particular types of winding wires - Polyvinyl acetal enamelled rectangular copper wire, class 120) |
BS EN 60317-19-1996 |
特种绕组线规范.涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜线.130级 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130) |
BS EN 60317-1996 |
特殊型绕组线规范.聚酰亚胺涂层的软钎焊聚酰胺酯漆包圆铜线.130类 |
(Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130) |
BS EN 60317-2-1993 |
特种绕组线规范.130级带粘合层的可焊接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer) |
BS EN 60317-20-1993 |
特种绕组线规范.155级可焊接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 155) |
BS EN 60317-21-1996 |
特殊型绕组线规范.聚酰亚胺涂层的软钎焊聚酰胺酯漆包圆铜线.155类 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155) |
BS EN 60317-22-1993 |
特种绕组线规范.180级涂覆聚酰胺的聚酯或聚酰胺酯漆包圆铜线 |
(Specifications for particular types of winding wires - Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180) |
BS EN 60317-23-1993 |
特种绕组线规范.180级可焊接聚酰胺酯漆包圆铜线 |
(Specifications for particular types of winding wires - Solderable polyesterimide enamelled round copper wire, class 180) |
BS EN 60317-24-1996 |
特殊型绕组线规范.聚酰亚胺涂层的聚酯或聚酯酰胺聚酰亚胺漆包圆铝线,180类 |
(Specifications for particular types of winding wires - Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180) |
BS EN 60317-25-1993 |
特种绕组线规范.200级涂覆聚酰胺-酰亚胺的聚酯或聚酰胺酯漆包圆铝线 |
(Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200) |
BS EN 60317-26-1993 |
特种绕组线规范.200级聚酰胺-亚酰胺酯漆包圆铜线 |
(Specifications for particular types of winding wires - Polyamide-imide enamelled round copper wire, class 200) |
BS EN 60317-27-1998 |
特种绕组线规范.纸带覆盖扁铜绕组线 |
(Specifications for particular types of winding wires - Paper tape covered rectangular copper wire) |
BS EN 60317-28-1991 |
特种绕组线规范.180级聚酰胺酯漆包矩形铜线 |
(Specifications for particular types of winding wires - Polyesterimide enamelled rectangular copper wire, class 180) |
BS EN 60317-29-1991 |
特种绕组线规范.200级涂覆聚酰胺-酰亚胺的聚酯或聚酰胺酯漆包矩形铜线 |
(Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200) |
BS EN 60317-3-1996 |
特种绕组线规范.第1部分:聚乙烯醇乙醛漆包圆铜绕组线,155级 |
(Specifications for particular types of winding wires - Polyester enamelled round copper wire, class 155) |
BS EN 60317-30-1993 |
特种绕组线规范.220级聚酰亚胺漆包矩形铜线 |
(Specifications for particular types of winding wires - Polyimide enamelled rectangular copper wire, class 220) |
BS EN 60317-31-1993 |
特种绕组线规范.温度指数为180的玻璃纤维绕制聚酯或聚酰胺酯经清漆处理过的裸线或漆包矩形铜线 |
(Specifications for particular types of winding wires - Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180) |
BS EN 60317-32-1993 |
特种绕组线规范.温度指数为155的玻璃纤维绕制聚酯或聚酰胺酯经清漆处理过的裸线或漆包矩形铜线 |
(Specifications for particular types of winding wires - Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155) |
BS EN 60317-33-1993 |
特种绕组线规范.温度指数为200的玻璃纤维绕制的经硅氧烷漆处理的裸线或漆包矩形铜线 |
(Specifications for particular types of winding wires - Glass-fibre wound, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200) |
BS EN 60317-34-1997 |
特种绕组线规范.第34部分:聚酯漆包圆铜线.130L级 |
(Specifications for particular types of winding wires - Polyester enamelled round copper wire, class 130 L) |
BS EN 60317-35-1993 |
特种绕组线规范.155级带粘结层的可焊接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer) |
BS EN 60317-36-1993 |
特种绕组线规范.180级带粘结层的可焊接聚酰胺酯漆包圆铜线 |
(Specifications for particular types of winding wires - Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer) |
BS EN 60317-37-1993 |
特种绕组线规范.180级带粘结层的聚酰胺酯漆包圆铜线 |
(Specifications for particular types of winding wires - Polyesterimide enamelled round copper wire, class 180 with a bonding layer) |
BS EN 60317-38-1993 |
特种绕组线规范.200级带粘结层的涂覆聚酰胺-酰亚胺的聚酯或聚酰胺酯漆包圆铜线 |
(Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer) |
BS EN 60317-39-1993 |
特殊型绕组线规范.玻璃纤维编织聚酯或聚酰亚胺处理,裸或漆包方铜线,温度系数180 |
(Specifications for particular types of winding wires - Glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180) |
BS EN 60317-4-1993 |
特种绕组线规范.130级可焊接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 130) |
BS EN 60317-40-1993 |
特殊型绕组线规范.玻璃纤维编织硅清漆处理,裸或漆包方铜线,温度系数200 |
(Specifications for particular types of winding wires - Glass-fibre braided silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200) |
BS EN 60317-42-1997 |
特种绕组线规范.第42部分:聚亚酰胺酯漆包圆铜线.200级 |
(Specifications for particular types of winding wires - Polyester-amide-imide enamelled round copper wire, class 200) |
BS EN 60317-43-1997 |
特种绕组线规范.第43部分:芳香聚酰亚胺绝缘胶带包圆铜线.240级 |
(Specifications for particular types of winding wires - Aromatic polyimide tape wrapped round copper wire, class 240) |
BS EN 60317-44-1997 |
特种绕组线规范.第44部分:芳族聚酰亚胺包装矩形铜线.240级 |
(Specifications for particular types of winding wires - Aromatic polyimide tape wrapped rectangular copper wire, class 240) |
BS EN 60317-45-1998 |
特种绕组线规范.聚酯漆包圆铜线.级别130 |
(Specifications for particular types of winding wires - Polyester enamelled round copper wire, class 130) |
BS EN 60317-46-1997 |
特种绕组线规范.芳族聚酰胺漆包圆铜线.240级 |
(Specifications for particular types of winding wires - Aromatic polyimide enamelled round copper wires, class 240) |
BS EN 60317-47-1997 |
特种绕组线规范.第47部分:芳族聚酰胺漆包矩形铜线.240级 |
(Specifications for particular types of winding wires - Aromatic polyimide enamelled rectangular copper wire, class 240) |
BS EN 60317-48-2000 |
特殊型绕组线规范.玻璃纤维环绕树脂或清漆浸渍、裸或漆包圆铜线及温度指数为155 |
(Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155) |
BS EN 60317-49-2000 |
特殊型绕组线规范.玻璃纤维环绕树脂或清漆浸渍、裸或漆包圆铜线及温度指数为180 |
(Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180) |
BS EN 60317-50-2000 |
特殊型绕组线规范.玻璃纤维环绕树脂或清漆浸渍、裸或漆包圆铜线及温度指数为200 |
(Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200) |
BS EN 60317-51-2001 |
绕组线特殊类型规范.可焊接的聚氨酯漆包圆铜线.180级 |
(Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 180) |
BS EN 60317-52-1999 |
特种绕组线规范.聚芳香酰胺带包被的圆铜线.温度指数220 |
(Specifications for particular types of winding wires - Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220) |
BS EN 60317-53-1999 |
特种绕组线规范.芳香聚酰胺带包被的矩型铜线.温度指数220 |
(Specifications for particular types of winding wires - Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220) |
BS EN 60317-7-1993 |
特种绕组线规范.220级聚酰亚胺漆包圆铜线 |
(Specifications for particular types of winding wires - Polyimide enamelled round copper wire, class 220) |
BS EN 60317-8-1993 |
特种绕组线规范.180级聚酰胺酯漆包圆铜线 |
(Specifications for particular types of winding wires - Polyesterimide enamelled round copper wire, class 180) |
BS EN 60318-1-1998 |
电声学.人头和耳模拟器.超级听力耳机校正用耳模拟器 |
(Electroacoustics - Simulators of human head and ear - Ear simulator for the calibration of supra-aural earphones) |
BS EN 60318-2-1998 |
电声学.人头和耳模拟器.在超高频范围内测声耳机校正用间歇听力耦合器 |
(Electroacoustics - Simulators of human head and ear - An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range) |
BS EN 60318-3-1998 |
电声学.人头和耳模拟器.用于测听计的超级听力耳机校正用听力耦合器 |
(Electroacoustics - Simulators of human head and ear - Acoustic coupler for the calibration of supra-aural earphones used in audiometry) |
BS EN 60320-1-2001 |
家用和类似用途设备耦合器.一般要求 |
(Appliance couplers for household and similar general purposes - General requirements) |
BS EN 60320-2-1-2001 |
家用和类似用途设备耦合器.耦合器单个类型要求规范.缝纫机耦合器 |
(Appliance couplers for household and similar general purposes - Specification of requirements for individual types of coupler - Sewing machine couplers) |
BS EN 60320-2-2-1999 |
家用和类似用途设备耦合器.各型耦合器要求规范.家用和类似用途设备用互连耦合器 |
(Appliance couplers for household and similar general purposes - Specification of requirements for individual types of coupler - Interconnection couplers for household and similar equipment) |
BS EN 60320-2-3-1999 |
家用和类似用途设备耦合器.各型耦合器要求规范.防护级超过IPXO的设备耦合器 |
(Appliance couplers for household and similar general purposes - Specification of requirements for individual types of coupler - Appliance coupler with a degree of protection higher than IPX0) |
BS EN 60322-2001 |
铁路应用.滚动车辆的电气设备.开放结构的电阻规则 |
(Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction) |
BS EN 60325-2004 |
辐射防护仪.α、β和α/β(β 能量大于60 keV)污染测量仪和监测仪 |
|
BS EN 60332-1-2-2004 |
着火条件下电缆和光缆的试验.单股绝缘电线或电缆的垂直火焰蔓延的试验.1kW预混火焰法 |
|
BS EN 60332-1-3-2004 |
着火条件下电缆和光缆的试验.单股绝缘电线或电缆的垂直火焰蔓延的试验.燃烧的微滴/颗粒的测定法 |
|
BS EN 60332-1-3-2004 |
着火条件下电缆和光缆的试验.单股绝缘电线或电缆的垂直火焰蔓延的试验.燃烧的微滴/颗粒的测定程序 |
|
BS EN 60332-2-2-2004 |
着火条件下电缆和光缆的试验.单股绝缘电线或电缆的垂直火焰蔓延的试验.扩散火焰法 |
|
BS EN 60335-1-2002 |
家用和类似用途电器的安全规范.一般要求 |
(Specification for safety of household and similar electrical appliances - General requirements) |
BS EN 60335-2-10-2003 |
家用和类似用途电器的安全规范.地板处理机和湿式擦洗机的特殊要求 |
(Specification for safety of household and similar electrical appliances - Particular requirements for floor treatment machines and wet scrubbing machines) |
BS EN 60335-2-101-2003 |
家用和类似用途电器的安全规范.蒸发器的特殊要求 |
(Specification for safety of household and similar electrical appliances - Particular requirements - Particular requirements for vaporizers) |