标准号 |
中文名称 |
英文名称 |
BS 6564-3-1990 |
聚四氟乙烯(PTFE)材料和制品.第3部分:填充聚四氟乙烯的E类玻璃纤维规范 |
(Polytetrafluoroethylene (PTFE) materials and products - Specification for E glass fibre filled polytetrafluoroethylene) |
BS 6570-1986 |
钢丝绳的选择、保养和维修实用规程 |
(Code of practice for the selection, care and maintenance of steel wire ropes) |
BS 6571-1-1989 |
停车场控制设备.第1部分:投放硬币控制的停车计时表的规范 |
(Vehicle parking control equipment - Specification for coin operated clockwork parking meters) |
BS 6571-2-1989 |
停车场控制设备.第2部分:电动停车计时器规范 |
(Vehicle parking control equipment - Specification for electrically powered parking meters) |
BS 6571-4-1989 |
停车场控制设备.第4部分:栅栏型停车场控制设备规范 |
(Vehicle parking control equipment - Specification for barrier type parking control equipment) |
BS 6571-6-1996 |
停车场控制设备.第6部分:结算停车费控制设备规范 |
(Vehicle parking control equipment - Specification for pay-on-foot parking control equipment) |
BS 6571-7-1997 |
停车场控制设备.第6部分:停车牌规范 |
(Vehicle parking control equipment - Specification for parking discs) |
BS 6571-8-1997 |
停车控制设备.预购停车凭单的规范 |
(Vehicle parking control equipment - Specification for pre-purchased parking vouchers) |
BS 6574-1985 |
土方机械操作和保养技术培训指南 |
(Guide to training of mechanics concerned with the operation and maintenance of earth-moving machinery) |
BS 6576-1985 |
化学防潮层安装实用规程 |
(Code of practice for installation of chemical damp-proof courses) |
BS 658-1990 |
馏程测定用器具(包括烧瓶和受液器)规范 |
(Specification for apparatus for the determination of distillation range (including flasks and receivers)) |
BS 6580-1992 |
防腐蚀发动机冷却液防冻添加剂(防冻剂)规范 |
(Specification for corrosion inhibiting, engine coolant concentrate (’antifreeze’)) |
BS 6582-2000 |
连续热镀铅合金(铅锡合金)镀层的冷轧扁平碳钢制品 |
(Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products) |
BS 6583-1985 |
用于测定中央通风装置中风机室额定功率的体积测量方法(包括调定额定值的指南) |
(Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)) |
BS 6584-1985 |
手洗餐具用洗涤剂性能的对比试验导则 |
(Guide for comparative testing of performance of detergents for hand dishwashing) |
BS 6585-1985 |
家用机洗餐具用洗涤剂性能的对比试验导则 |
(Guide for comparative testing of performance of detergents for domestic machine dishwashing) |
BS 6586-1-1993 |
用压注法制作的聚氨酯硬泡沫塑料.第1部分:运输集装箱和车身用隔热板的聚氨酯硬泡沫塑料规范 |
(Rigid polyurethane (PUR) foam produced by the press injection method - Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies) |
BS 6587-1985 |
紧固件的验收检验方法 |
(Method of acceptance inspection for fasteners) |
BS 6590-1985 |
开式机械压力机的额定功率和尺寸规范 |
(Specification for capacity ratings and dimensions of power presses, mechanical open front type) |
BS 6591-1985 |
矿用链式输送机的刮土板规范 |
(Specification for scraper bars for chain conveyors for mining) |
BS 6592-1985 |
矿用链式输送机从动链轮组件规范 |
(Specification for drive sprocket assemblies for chain conveyors for mining) |
BS 6593-1985 |
纺织和钢铁业传送机的捻合加强传送带的现场非机械连接接头实用规程 |
(Code of practice for on-site non-mechanical jointing of plied textile and steel reinforced conveyor belting) |
BS 6599-1985 |
铁矿石颗粒压碎强度的测定方法 |
(Method for determination of crushing strength of iron ore pellets) |
BS 6600-1-1987 |
无线电通信与电子设备用变压器与电感器的外形尺寸.第1部分:使用YEI-1叠片的变压器和电感器的外形尺寸规格 |
(Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and inductors using YEI-1 laminations) |
BS 6600-10-1985 |
无线电通信与电子设备用变压器与电感器的外形尺寸.第10部分:使用C-磁芯Q范围的变压器与电感器的外形尺寸规 |
(Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and inductors using the Q range of C-c) |
BS 6601-1985 |
信汇付款单规范 |
(Specification for mail payment orders) |
BS 6604-1985 |
起动器蓄电池安全操作实用指南 |
(Code of practice for safe operation of starter batteries) |
BS 6605-1990 |
十字槽头螺钉规范 |
(Specification for cross recesses for screws) |
BS 6606-1987 |
榨油油渣的取样方法 |
(Methods for sampling oilseed residues) |
BS 6607-1-1985 |
自动刀具更换用7/24度锥形刀杆.第1部分:40、45和50号锥杆规范 |
(Tool shanks with 7/24 taper for automatic tool changers - Specification for shanks Nos - 40, 45, and 50) |
BS 6607-2-1985 |
自动刀具更换用7/24锥形刀杆.第2部分:40、45和50号锥杆用定位球形柄规范 |
(Tool shanks with 7/24 taper for automatic tool changers - Specification for retention knobs for shanks Nos - 40, 45 and 50) |
BS 6607-3-1993 |
自动刀具更换用7/24锥形刀杆.第3部分:轴头用锥杆规范 |
(Tool shanks with 7/24 taper for automatic tool changers - Specification for tapers for spindle noses) |
BS 6607-4-1994 |
带7/24锥形自动刀具变换器的刀具柄.加工中心轴托架的正面功能尺寸的规格 |
(Tool shanks with 7/24 taper for automatic tool changers - Specification for functional dimensions of front faces of spindle holders for machine centres) |
BS 6608-1985 |
软垫家具用牛皮革规范 |
(Specification for cattle hide leathers for upholstered furniture) |
BS 6610-1996 |
火山灰和粉状燃料灰分水泥规范 |
(Specification for Pozzolanic pulverized-fuel ash cement) |
BS 6611-1985 |
固定建筑、特别是楼房与沿海建筑中居民对低频水平振动(0.063Hz-1Hz)响应的评定指南 |
(Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)) |
BS 6612-1985 |
渐缩式弹力袜规范 |
(Specification for graduated compression hosiery) |
BS 6613-1985 |
规定弹性联轴器特性的方法 |
(Methods for specifying characteristics of resilient shaft couplings) |
BS 6615-1996 |
金属和金属合金铸件的尺寸公差规范 |
(Specification for dimensional tolerances for metal and metal alloy castings) |
BS 6616-1986 |
光学文字识读(OCR)用纸和印刷规范 |
(Specification for paper and print for optical character recognition (OCR)) |
BS 662-1-1979 |
工业用二硫化碳.第1部分:规范 |
(Carbon disulphide for industrial use - Specification) |
BS 662-2-1978 |
工业用二硫化碳.第2部分:取样和试验方法 |
(Carbon disulphide for industrial use - Sampling and methods of test) |
BS 662-3-1979 |
工业用二硫化碳.第3部分:补充的试验方法 |
(Carbon disulphide for industrial use - Additional methods of test) |
BS 6620-1-1992 |
工业板筛.第1部分:厚度为3mm和以上的筛子使用指南 |
(Industrial plate screens - Guide for screens of thickness 3 mm and above) |
BS 6620-2-1992 |
工业用板式筛网.3mm厚度以下的筛网指南 |
(Industrial plate screens - Guide for screens of thickness below 3 mm) |
BS 6622-1999 |
额定电压范围为(3800~6600)V和(19000~33000)V,具有挤压交叉连接的聚乙烯或乙烯丙烯橡胶绝缘电缆规范 |
(Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV) |
BS 6626-1985 |
电压为1kV以上至36kV(含)的电气开关设备和控制装置的维护实用规程 |
(Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV) |
BS 6627-1985 |
专著和连续出版物缩微平片标题表示法推荐规范 |
(Recommendations for presentation of headers for microfiche of monographs and serials) |
BS 6628-1985 |
医疗诊断用旋转阳极X 射线管的最大对称辐射区域的测定方法 |
(Method for determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis) |
BS 6630-1985 |
用薄层色谱法识别橡胶和橡胶制品中抗降解剂的方法 |
(Method for identification of antidegradants in rubber and rubber products by thin layer chromatography) |
BS 6631-1985 |
转盘式钻机和振动机用橡胶软管及其配件规范 |
(Specification for rubber hoses and hose assemblies for rotary drilling and vibration applications) |
BS 6632-1985 |
船舶振动数据的测量和报告方法 |
(Method for measurement and reporting of shipboard vibration data) |
BS 6633-1985 |
船舶结构和设备局部振动数据的测量和报告方法 |
(Method for measurement and reporting of local vibration data of ship structures and equipment) |
BS 6635-2003 |
木制鞍马座架的生产规范 |
(Manufacture of saddle trees made from wood - Specification) |
BS 6638-2-1990 |
数据终端设备(DTE)/(DCE)接口传输信号质量指南.第2部分:同步传输 |
(Guide to transmission signal quality at DTE/DCE interfaces - Synchronous transmission) |
BS 6641-1985 |
放射医学术语词汇 |
(Glossary of medical radiology terms) |
BS 6642-1985 |
一次使用的聚乙烯塑料垃圾袋规范 |
(Specification for disposable plastics refuse sacks made from polyethylene) |
BS 6643-1-1985 |
灭火器(根据BS 5423便携式灭火器制造的)重新装填.第1部分:工序和材料规范 |
(Recharging fire extinguishers (manufactured to BS 5423 ’specification for portable fire extinguishers’) - Specification for procedure and materials) |
BS 6643-2-1985 |
灭火器(根据BS 5423便携式灭火器制造的)重新装填.第2部分:干粉灭火剂的重新装填规范 |
(Recharging fire extinguishers (manufactured to BS 5423 ’specification for portable fire extinguishers’) - Specification for powder refill charges) |
BS 6644-1991 |
额定输入功率在60KW与2MW之间(2类和3类煤气)燃气热水锅炉安装规范 |
(Specification for installation of gas-fired hot water boilers of rated inputs between 60 kW and 2 MW (2nd and 3rd family gases)) |
BS 6644-2005 |
额定输入功率在70 kW(净功率)和1.8 MW(净功率)之间(2类和3类家用煤气)的燃气热水锅炉的安装规范 |
|
BS 6645-1985 |
亚麻布料碱溶性的测定方法 |
(Method for determination of alkali solubility of flax materials) |
BS 6646-1985 |
织物灰分测定方法 |
(Method for determination of ash of textiles) |
BS 6647-1985 |
脉冲试验用示波器和峰值伏特计指南 |
(Guide to oscilloscopes and peak voltmeters for impulse tests) |
BS 6648-1986 |
顺序测定金属含量用的织物湿灰化方法 |
(Methods for wet ashing of textile materials for subsequent determination of metal content) |
BS 6649-1985 |
粘土和硅酸钙标准砖规范 |
(Specification for clay and calcium silicate modular bricks) |
BS 6651-1999 |
建筑物避雷装置的实施规范 |
(Code of practice for protection of structures against lightning) |
BS 6653-1985 |
逻辑分析仪的特性表达方法 |
(Method for expression of the properties of logic analyzers) |
BS 6654-1985 |
铺地织物电阻率的测定方法 |
(Method for determination of the electrical resistivity of textile floor coverings) |
BS 6655-1986 |
用于保存听力的纯声空气传导临界测听术规范 |
(Specification for pure tone air conduction threshold audiometry for hearing conservation purposes) |
BS 6656-2002 |
由射频辐射引起的易燃空气意外着火的评定指南 |
(Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide) |
BS 6657-2002 |
由射频辐射引起的电起爆器件的意外着火的评定指南 |
(Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation - Guide) |
BS 6658-1985 |
车辆司机用安全帽规范 |
(Specification for protective helmets for vehicle users) |
BS 6660-1985 |
显微照相装置安装与维护指南 |
(Guide to setting up and maintaining micrographics units) |
BS 6662-1985 |
低压源和信号线路上短时间瞬态测量方法指南 |
(Guide to methods of measurement of short duration transients on low voltage power and signal lines) |
BS 6663-1986 |
织物尼龙线卷曲强度的测定方法 |
(Methods for determination of crimp rigidity of textured nylon yarns) |
BS 6664-4-1992 |
石油和石油产品闪点.第4部分:闪点的测定方法(快速平衡法) |
(Flashpoint of petroleum and related products - Method for determination of flashpoint (rapid equilibrium method)) |
BS 6668-1-1986 |
纺织提升吊链.第1部分:一般技术服务用天然和人造纤维绳索制的提升链规范 |
(Textile lifting slings - Specification for lifting slings for general service made from certain natural and man-made fibre ropes) |
BS 6669-1-1986 |
银和银合金电镀层的试验方法.第1部分:镀层厚度的测量 |
(Methods of test for electroplated silver and silver alloy coatings - Determination of coating thickness) |
BS 6669-2-1986 |
银和银合金电镀层的试验方法.第2部分:粘滞试验 |
(Methods of test for electroplated silver and silver alloy coatings - Adhesion tests) |
BS 6669-3-1989 |
银和银合金电镀层的试验方法.第3部分:残留盐的检测 |
(Methods of test for electroplated silver and silver alloy coatings - Detection of residual salts) |
BS 667-1996 |
光度计规范 |
(Specification for illuminance meters) |
BS 6670-1-1986 |
金和金合金电镀层的试验方法.第1部分:镀层厚度的测量 |
(Methods of test for electroplated gold and gold alloy coatings - Determination of coating thickness) |
BS 6670-4-1986 |
金和金合金电镀层的试验方法.第4部分:金含量的测定 |
(Methods of test for electroplated gold and gold alloy coatings - Determination of gold content) |
BS 6670-5-1986 |
金和金合金电镀层的试验方法.第5部分:粘滞试验 |
(Methods of test for electroplated gold and gold alloy coatings - Adhesion tests) |
BS 6674-1985 |
一次性使用的微量吸移管规范 |
(Specification for disposable micropipettes) |
BS 6675-1986 |
供水用(铜合金)辅助工作阀 |
(Specification for servicing valves (copper alloy) for water services) |
BS 6680-1985 |
煤矿和其他沼气敏感矿用柴油机防爆设备规范 |
(Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp) |
BS 6683-1985 |
阀门的安装和使用指南 |
(Guide to installation and use of valves) |
BS 6684-1989 |
婴儿在折叠式轻便推车内、高椅上和步行时用以约束其活动的安全绳(包括可拆卸活动把手)的规范. |
(Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking) |
BS 669-1-1990 |
燃气灶具用软管.接头配件和管座.第1部分:采用第1、2类燃气的家用灶具用带绕金属软管、封盖、接头配件和管座 |
(Flexible hoses, end fittings and sockets for gas burning appliances - Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2n) |
BS 669-2-1997 |
燃气灶具用软管、接头配件和管座.第2部分:采用第1、2类燃气的家用灶具用波纹金属软管、封盖、接头配件和管 |
(Flexible hoses, end fittings and sockets for gas burning appliances - Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd an) |
BS 6696-1986 |
测定容量用玻璃器皿的使用方法和容积试验方法 |
(Methods for use and testing of capacity of volumetric glassware) |
BS 6699-1992 |
用于硅酸盐水泥磨碎粒状高炉炉渣规范 |
(Specification for ground granulated blastfurnace slag for use with Portland cement) |
BS 67-1987 |
天花板灯线盒规范 |
(Specification for ceiling roses) |
BS 6700-1997 |
建筑物及其庭园中家用供水装置的设计、安装、试验和维护规范 |
(Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages) |
BS 6701-1994 |
与电信系统连接仪表的安装实施规则 |
(Code of practice for installation of apparatus intended for connection to certain telecommunication systems) |
BS 6701-2004 |
电信设备和电信电缆敷设.安装、运行和维护规范 |
|
BS 6704-1996 |
煤矿中安全电气设备的选择、安装和维修实用规程 |
(Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines) |
BS 6705-1987 |
煤矿中安全电路用的电气测量仪器规范 |
(Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines) |
BS 6706-1986 |
一次性使用的血清玻璃吸移管规范 |
(Specification for disposable glass serological pipettes) |
BS 6708-1998 |
用于矿井和露天开采的软电缆 |
(Flexible cables for use at mines and quarries) |
BS 6709-1986 |
在有沼气危险的矿井中根据两个以上标准制造的电器的互连规范 |
(Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp) |
BS 6710-1987 |
链轮齿成形刀具的尺寸规范 |
(Specification for dimensions of chain wheel tooth forming tools) |
BS 6711-1-1986 |
基本由玻璃、瓷或透明石英制实验室器皿词汇.第1部分:器皿项目用名称 |
(Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica - Names for items of apparatus) |
BS 6712-1-1995 |
纸、纸板受潮膨胀度的测定.第1部分:最大相对湿度在68%以下的受潮膨胀度的测定方法 |
(Measurement of hygroexpansivity of paper and board - Method for the measurement of hygroexpansivity up to a maximum relative humidity of 68%) |
BS 6712-2-1991 |
纸和纸板受潮膨胀度的测定.第2部分:最大相对湿度达到86%时受潮膨胀度的测定方法 |
(Measurement of hygroexpansivity of paper and board - Method for measurement of hygroexpansivity up to a maximum relative humidity of 86%) |
BS 6713-1-1986 |
防爆系统.第1部分:空气中易爆粉尘爆炸指数的测定方法 |
(Explosion protection systems - Method for determination of explosion indices of combustible dusts in air) |
BS 6713-2-1986 |
防爆系统.第2部分:空气中易爆气体爆炸指数的测定方法 |
(Explosion protection systems - Method for determination of explosion indices of combustible gases in air) |
BS 6713-3-1986 |
防爆系统.第3部分:除粉尘/空气和气体空气混合物外燃油/空气混合物爆炸指数的测定方法 |
(Explosion protection systems - Method for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures) |
BS 6713-4-1986 |
防爆系统.第4部分:排爆系统效力的测定方法 |
(Explosion protection systems - Method for determination of efficacy of explosion suppression systems) |
BS 6715-1991 |
油鞣革规范 |
(Specification for chamois leather) |
BS 6716-1986 |
橡胶性能和类型指南 |
(Guide to properties and types of rubber) |
BS 6717-2001 |
预制非加筋混凝土铺路砖.要求和试验方法 |
(Precast, unreinforced concrete paving blocks - Requirements and test methods) |
BS 6719-1986 |
对以计算机系统为基础的系统的使用者规定要求指南 |
(Guide to specifying user requirements for a computer-based system) |
BS 6720-1986 |
包装上区分运输信息的标记规范 |
(Specification for marking transit information on packages for distribution) |
BS 6721-10-1989 |
铜及铜合金的取样与分析.第10部分:用滴定法对铜合金中铬的测定方法 |
(Sampling and analysis of copper and copper alloys - Method for determination of chromium in copper alloys: titrimetric method) |
BS 6721-11-1989 |
铜及铜合金的取样与分析.第11部分:用燃烧滴定法对铜及铜合金中硫的测定方法 |
(Sampling and analysis of copper and copper alloys - Method for determination of sulphur in copper and copper alloys: combustion titrimetric method) |
BS 6721-4-1986 |
铜及铜合金的取样与分析.第4部分:用火焰原子吸收分光光度法对铜与铜合金中铬的测定方法 |
(Sampling and analysis of copper and copper alloys - Method for determination of chromium in copper and copper alloys by flame atomic absorption spectrophotometry) |
BS 6721-5-1986 |
铜及铜合金的取样与分析.第5部分:用火焰原子吸收分光光度法对铜与铜合金中锌的测定方法 |
(Sampling and analysis of copper and copper alloys - Method for determination of zinc in copper and copper alloys by flame atomic absorption spectrophotometry) |