标准号 |
中文名称 |
英文名称 |
| BS 7800-2000 |
机动车燃料.高辛烷值无铅汽油(超级).规范 |
(Automotive fuel - High octane (super) unleaded petrol - Specification) |
| BS 7801-1995 |
在自动电梯和被使用中的载客传送带上工作的安全业务法规 |
(Code of practice for safe working on escalators and passenger conveyors in use) |
| BS 7801-2004 |
自动电梯和载客传送带.自动电梯和载客传送带的安全工作实施规程 |
|
| BS 7802-1995 |
运筹学名词术语汇编 |
(Glossary of terms used in operational research) |
| BS 7803-1995 |
带有一个大于1000V的标称电压的高架线用陶瓷材料或玻璃绝缘子指南.穿孔试验 |
(Guide to insulators of ceramic material or glass for overhead-lines with a nominal voltage greater then 1000 V, puncture testing) |
| BS 7804-1-1995 |
茶叶袋规范.第1部分:托盘和集装箱运输茶叶用的标准袋规范 |
(Tea sacks - Specification for a reference sack for palletized and containerized transport of tea) |
| BS 7804-2-1999 |
茶叶袋.茶叶的货盘装运和容器运输袋的性能规范 |
(Tea sacks - Performance specification for sacks for palletized and containerized transport of tea) |
| BS 7805-1-1995 |
直径尺寸大到(包括)10mm的环煅开槽铆钉规范 |
(Swaged collar grooved rivets - Specification for sizes up to and including 10 mm diameter) |
| BS 7805-2-1997 |
模压的带环槽铆钉.尺寸在12.7mm至34.9mm之间的铆钉规范 |
(Swaged collar grooved rivets - Specification for sizes from 12.7 mm up to and including 34.9 mm) |
| BS 7807-1995 |
建筑物(寓所除外)的包括火灾探测与警报系统和/或其它安全系统在内的综合系统的设计、装配与服务的实施规程 |
(Code of practice for design, installation and servicing of integrated systems incorporating fire detection and alarm systems and/or other security systems for buildings other than dwellings) |
| BS 7808-1995 |
电绝缘材料.耐交流电压的评定.绪言 |
(Electrical insulating materials - A.C. voltage endurance evaluation - Introduction) |
| BS 7811-2-1995 |
确定电离辐射对绝缘材料影响的导则.第2部分:辐照和试验规程 |
(Guide for determining the effects of ionizing radiation on insulating materials - Procedures for irradiation and test) |
| BS 7813-1995 |
液态烃类容量计系统的统计控制导则 |
(Guide for statistical control of dynamic liquid hydrocarbon volumetric metering systems) |
| BS 7814-1995 |
含有既可以头下锁住又可以防止滚动功能的螺栓和螺钉规范 |
(Specification for bolts and screws incorporating either underhead locking or anti-rotation features) |
| BS 7815-1995 |
带电表面放电评定导则 |
(Guide for evaluating the discharges from a charged surface) |
| BS 7816-1-1995 |
高聚物中长期辐射老化的测定.调节限制氧化扩散的技术 |
(Determination of long-term radiation ageing in polymers - Techniques for monitoring diffusion-limited oxidation) |
| BS 7816-2-1997 |
高聚物长期辐射下老化的测定.低剂量辐射下老化预测程序 |
(Determination of long-term radiation ageing in polymers - Procedures for predicting ageing at low dose rates) |
| BS 7816-3-1998 |
高聚物长期辐射老化的测定.低压电缆材料使用时的监测程序 |
(Determination of long-term radiation ageing in polymers - Procedures for in-service monitoring of low-voltage cable materials) |
| BS 7817-1-1995 |
X射线医疗诊断保护装置.第1部分:材料衰减特性的测定 |
(Protective devices against diagnostic medical X-radiation - Method for determination of attenuation properties of sheet materials) |
| BS 7817-2-1995 |
X射线医疗诊断保护装置.第2部分:防护玻璃片 |
(Protective devices against diagnostic medical X-radiation - Specification for protective glass plates) |
| BS 7818-1995 |
金属制行人制止系统规范 |
(Specification for pedestrian restraint systems in metal) |
| BS 7819-1995 |
电气绝缘材料的耐热测试分析试验方法实用导则 |
(Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials) |
| BS 7821-1-1995 |
不超过36KV的设备用带有最高电压值的50Hz、50-2500KVA三相油浸式配电变压器.不超过24KV的设备用带有最高电 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - General requirements and requirements for transformers with high) |
| BS 7821-2.1-1995 |
不超过36KV的设备用带有最高电压值的50Hz、50-2500KVA三相油浸式配电变压器.带有高压和/或低压端电缆接线盒 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage a) |
| BS 7821-2.2-1998 |
50HZ,带不超过36KW设备最高电压的由50-2500KVA的三相油浸配电变压器.带高压和/或低压单侧电缆盒的配电变压 |
() |
| BS 7821-2.3-1998 |
50HZ,带有不超过36KV的设备用高压由50-2500KVA的三相油浸配电变压器.带有在高压线上和/或低压线边电缆盒的 |
() |
| BS 7821-3-1995 |
不超过36KV的设备用带有最高电压值的50Hz、50-2500KVA三相油浸式配电变压器.36KV设备用带有最高电压值的变 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Supplementary requirements for transformers with highest voltage) |
| BS 7821-4-1995 |
不超过36KV的设备用带有最高电压值的50Hz、50-2500KVA三相油浸式配电变压器.带有非正弦电流的变压器的额定 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with n) |
| BS 7821-6-2002 |
不超过36KV的设备用带有最高电压值的50Hz、50～2500KVA三相油浸式配电变压器.关于加压波纹密封罐的要求和试 |
(Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Requirements and tests concerning pressurized corrugated tanks) |
| BS 7822-2.1-1999 |
低压系统内部设备的绝缘配合.应用指南.尺寸确定程序工作单和尺寸确定实例 |
(Insulation coordination for equipment within low-voltage systems - Application guide - Dimensioning procedure worksheets and dimensioning examples) |
| BS 7822-3-1995 |
低压电气装置内部的绝缘配合.第3部分:印制电路板装配件的为绝缘配合用的涂覆层 |
(Insulation coordination for equipment within low-voltage systems - Use of coatings to achieve insulation coordination of printed board assemblies) |
| BS 7823-1-1995 |
托架滑动轴承.轴承座部件规范 |
(Pedestal plain bearings - Specification for pillow blocks) |
| BS 7823-2-1995 |
轴承座滑动轴承.边法兰轴承规范 |
(Pedestal plain bearings - Specification for side flange bearings) |
| BS 7823-3-1995 |
轴承座滑动轴承.中心法兰轴承规范 |
(Pedestal plain bearings - Specification for centre flange bearings) |
| BS 7824-3.3-1995 |
电工用非纤维素纸规范.各种材料规范.未添加聚芳基酰胺(芳族聚酰胺)纸 |
(Non-cellulosic papers for electrical purposes - Specifications for individual materials - Unfilled aramid (aromatic polyamide) papers) |
| BS 7825-1-1995 |
橡胶和塑料试验设备的校准.原则和一般要求规范 |
(Calibration of rubber and plastics test equipment - Specification for principles and general requirements) |
| BS 7825-2-1996 |
橡胶和塑料试验设备的校准.校准程序 |
(Calibration of rubber and plastics test equipment - Calibration procedures) |
| BS 7825-3.1-1997 |
橡胶和塑料试验设备的校正.校正程序.热性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Thermal properties) |
| BS 7825-3.10-1998 |
橡胶和塑料试验设备的校正.校正计划.调节、样品及试样制备 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Conditioning, sample and test piece preparation) |
| BS 7825-3.11-1998 |
橡胶和塑料试验设备的校正.校正计划.橡胶聚合物的识别和化学性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Rubber polymer identification and chemical properties) |
| BS 7825-3.2-1997 |
橡胶和塑料试验设备的校准.校准表格.电特能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Electrical properties) |
| BS 7825-3.3-1997 |
橡胶和塑料试验设备的校准.校准表格.塑料的机械特性 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Mechanical properties of plastics) |
| BS 7825-3.4-1998 |
橡胶和塑料试验设备的校正.校正计划.橡胶的机械性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Mechanical properties of rubber) |
| BS 7825-3.5-1997 |
橡胶和塑料试验设备的校准.校准表格.光学和老化特性 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Optical and weathering properties) |
| BS 7825-3.6-1997 |
橡胶和塑料试验设备的校准.校准表格.尺寸特性 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Dimensional properties) |
| BS 7825-3.7-1998 |
橡胶和塑料试验设备的校正.校正一览表.流变性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Rheological properties) |
| BS 7825-3.8-1998 |
橡胶和塑料试验设备的校正.校正计划.降解和环境特征 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Degradation and environmental properties) |
| BS 7825-3.9-1998 |
橡胶和塑料试验设备的校正.校正表.易燃性能 |
(Calibration of rubber and plastics test equipment - Calibration schedules - Flammability characteristics) |
| BS 7826-1-1995 |
老化试验数据的统计分析导则.以正态分布试验结果平均值为基础的方法 |
(Guide for the statistical analysis of ageing test data - Methods based on mean values of normally distributed test results) |
| BS 7827-1996 |
运动场地的设计,规定,维护和执行应急声音系统用实用规程 |
(Code of practice for designing, specifying, maintaining and operating emergency sound systems at sports venues) |
| BS 7830-1996 |
应用软件用户用屏幕上文献加工的设计和准备指南 |
(Guide to the design and preparation of on-screen documentation for users of application software) |
| BS 7831-1995 |
绝缘漆耐热性试验规程.电气强度法 |
(Test procedure for thermal endurance of insulating varnishes - Electric strength method) |
| BS 7832-1995 |
建筑物的特性标准.简要报告清单.建筑物设计提要的内容 |
(Performance standards in building - Checklist for briefing - Contents of brief for building design) |
| BS 7833-1995 |
有玻璃纤维柄套的消防釜规范 |
(Specification for firefighters’ axes with glass fibre shafts) |
| BS 7834-1995 |
用涡轮表测量密闭风道的气流的规范 |
(Specification for turbine meters used for the measurement of gas flow in closed conduits) |
| BS 7835-2000 |
受火燃烧影响时有少量排放烟和腐蚀气体的额定电压从3800/6600V至19000/33000V以下的交联聚乙烯或乙丙橡胶挤 |
(Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and cor) |
| BS 7836-1996 |
新的和老化的电绝缘纸的聚合平均粘度测量 |
(Measurement of the average viscometric degree of polymerization of new and aged electric papers) |
| BS 7837-1996 |
大帐篷及类似纺织结构用织物易燃性能规范 |
(Specification for flammability performance for textiles used in the construction of marquees and similar textile structures) |
| BS 7838-1996 |
最大直径为28 mm的输送低压气体管道系统用波状不锈钢半硬式管和有关配件规范 |
(Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to 28 mm) |
| BS 7839-1995 |
有直柄的固体硬质合金端铣刀的尺寸 |
(Solid hardmetal end-mills with parallel shanks - Dimensions) |
| BS 7842-1996 |
带有预处理螺纹密封特性的安装在螺纹上的螺栓、螺钉和螺柱 |
Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread |
| BS 7843-1.1-1996 |
气象降水数据的获得和管理导则.第1部分:网络设计.第1节:用户对气象数据的要求 |
Guide to the acquisition and management of meteorological precipitation data - Network design - The user requirement for precipitation data |
| BS 7843-1.2-1996 |
气象降水数据的获取和管理指南.网络设计.网络设计和监测 |
Guide to the acquisition and management of meteorological precipitation data - Network design - Network design and monitoring |
| BS 7843-2.1-1996 |
气象降水数据的获取和管理指南.现场操作和数据管理.现场技术特点 |
Guide to the acquisition and management of meteorological precipitation data - Field practices and data management - Technical aspects in the field |
| BS 7843-2.2-1996 |
气象降水数据的获得和管理导则.第2部分:野外实习和数据管理.第2节:数据监视和数据制表 |
Guide to the acquisition and management of meteorological precipitation data - Field practices and data management - Methods of observation and data tabulation |
| BS 7843-2.3-1996 |
气象降水数据的获取和管理指南.现场操作和数据管理.数据管理 |
Guide to the acquisition and management of meteorological precipitation data - Field practices and data management - Data management |
| BS 7843-2.4-1996 |
气象降水数据的获得和管理导则.第2部分:野外实习和数据管理.第4节:地域降雨量 |
Guide to the acquisition and management of meteorological precipitation data - Field practices and data management - Areal rainfall |
| BS 7843-3.1-1999 |
气象降水数据的采集和管理指南.雨量计规范.蓄水式雨量计 |
(Guide to the acquisition and management of meteorological precipitation data - Specification for raingauges - Storage raingauges) |
| BS 7843-3.2-2005 |
气象降水数据的获取和管理指南.雨量计的规范.倾杯式雨量计 |
|
| BS 7843-3.2-2005 |
气象降水数据的获取和管理指南.雨量计的规范 |
|
| BS 7844-1-1996 |
100-250KVA、50Hz、设备电压不超过36KV的三相干式配电变压器.第1部分:设备最高电压不超24KV变压器用的要求和总要求 |
Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - General requirements and requirements for transformers with highest voltage for equipment not exceeding 24 kV |
| BS 7844-2-1996 |
100-250KVA、50Hz、设备高压不超过36KV的三相干式配电变压器.第2部分:设备最高电压为36KV变压器的补充要求 |
Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Supplementary requirements for transformers with highest voltage for equipment equal to 36 kV |
| BS 7844-3-1998 |
50HZ,带不超过36KW设备最高电压的由50-2500KVA的三相油浸配电变压器.负载非正弦电流的变压器额定功率的测定 |
Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with non-sinusoidal current |
| BS 7845-1996 |
用于BS 3939和BS EN 60617的导则.图表的制图符号 |
Guide to the use of BS 3939 and BS EN 60617: Graphical symbols for diagrams |
| BS 7846-2000 |
电缆.受火影响时排放少量烟和腐蚀气体的600/1000 V 热固性绝缘铠装耐火电缆 |
Electric cables - 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 7847-1996 |
流体动力系统和件.连接件和相关件.标称压力 |
Fluid power systems and components - Connectors and associated components - Nominal pressures |
| BS 7848-1996 |
齿轮.齿轮齿的磨损和损伤.术语 |
Gears - Wear and damage to gear teeth - Terminology |
| BS 7849-1-1996 |
石油和液态石油产品.直接静态测量.垂直储存箱容量.液压箱量规质量测量 |
Petroleum and liquid petroleum products - Direct static measurements - Contents of vertical storage tanks - Mass measurement by hydrostatic tank gauging |
| BS 7850-1-1992 |
全面质量管理.管理原则指南 |
Total quality management - Guide to management principles |
| BS 7850-2-1994 |
全面质量管理.第2部分:质量改进方法指南 |
Total quality management - Guidelines for quality improvement |
| BS 7851-1996 |
数字音频盒式磁带系统(DAT).DAT电流应用规则 |
Digital audio tape cassette system (DAT) - DAT logo application rule |
| BS 7852-1997 |
小舟和皮船设计的实用规程 |
(Code of practice for design of canoes and kayaks) |
| BS 7853-1996 |
机械振动.路面纵断面.测量数据的报告 |
(Mechanical vibration - Road surface profiles - Reporting of measured data) |
| BS 7854-1-1996 |
机械振动.通过非旋转部件的测量评估机械振动.总指南 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - General guidelines |
| BS 7854-3-1998 |
机械振动.通过在非旋转部件上测量的方法评定机械振动.现场测量时额定功率在15kW以上、额定速度在120r/min和 |
(Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min w) |
| BS 7854-4-1998 |
机械振动.非旋转部件上测量机械振动的评估.不包括航空改型在内的燃气轮机驱动装置 |
(Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Gas turbine driven sets excluding aircraft derivatives) |
| BS 7854-6-1996 |
机械振动.非旋转部件上测量机械振动的评估.额定功率在100KW以上的往复式机械 |
(Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Reciprocating machines with power ratings above 100 kW) |
| BS 7855-1-1996 |
磨擦片衬里的附件用米制铆钉.半管状铆钉规范 |
(Metric rivets for the attachment of friction linings - Specification for semi-tubular rivets) |
| BS 7856-1996 |
交流电设计操作规程,动能1级和2级瓦特表 |
(Code of practice for design of alternating current, watthour meters for active energy (classes 1 and 2)) |
| BS 7857-1-1996 |
肉和肉制品微生物检验法.假单胞菌spp.的计数 |
(Methods for microbiological examination of meat and meat products - Enumeration of Pseudomonas spp.) |
| BS 7857-2-1996 |
肉和肉制品的微生物检验法.乳酸菌计数.30°C时菌落计数技术 |
(Methods for microbiological examination of meat and meat products - Enumeration of lactic acid bacteria - Colony-count technique at 30 鳦) |
| BS 7857-3-1997 |
肉和肉制品的微生物检验方法.第3部分:Brochothrix thermosphacta的计数.菌落计数技术 |
(Methods for microbiological examination of meat and meat products - Enumeration of Brochothrix thermosphacta - Colony-count technique) |
| BS 7858-1996 |
安全环境下的人事管理的安全代码 |
(Code of practice for security screening of personnel employed in a security environment) |
| BS 7858-2004 |
保密环境中各个工作人员的安全隔离.实施规程 |
|
| BS 7859-1996 |
天燃气.热值、密度和相对密度及化合物沃泊指数的计算 |
(Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition) |
| BS 7861-1-1996 |
煤矿用地层加强支持系统件.岩石锚栓规范 |
(Strata reinforcement support system components used in coal mines - Specification for rockbolting) |
| BS 7861-2-1997 |
煤矿用地层支撑物系统件.管道电缆螺栓规范 |
(Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting) |
| BS 7862-1996 |
齿轮.磨削后表面回火腐蚀剂的检验 |
(Gears - Surface temper etch inspection after grinding) |
| BS 7863-1996 |
便携灭火器中灭火介质指示色码的推荐规程 |
(Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers) |
| BS 7864-1997 |
表面涂层用塑料容器的规范 |
(Specification for plastics containers for surface coatings) |
| BS 7865-1997 |
提供铁路动力的电接触钢轨规范 |
(Specification for steel electrical conductor rail for railway motive power supply) |
| BS 7867-1997 |
飞行器中用便携式灭火器规范 |
(Specification for portable fire extinguishers for use in aircraft) |
| BS 7868-1996 |
广播磁带录像机校准带指南 |
(Guide for calibration tapes for broadcast VTRs) |
| BS 787-1-1969 |
矿用式防爆电缆终端箱规范.第1部分:(650V以下三相交流电路用)电动机 直接起动用电缆终端箱 |
(Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V)) |
| BS 787-2-1968 |
矿用式防爆电缆终端箱规范.第2部分:(650V以下三相交流电路用)带空气断弧断路器的电缆终端箱 |
(Specification for mining type flameproof gate-end boxes - Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts)) |
| BS 787-3-1971 |
矿用式防爆电缆终端箱规范.第3部分:带照明变压器的电缆终端箱 |
(Specification for mining type flameproof gate-end boxes - Gate-end boxes with lighting transformers) |
| BS 787-4-1972 |
矿用式防爆电缆终端箱规范.第4部分:(650V以下三相交流电路用)钻机用电缆终端箱 |
(Specification for mining type flameproof gate-end boxes - Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V)) |
| BS 7870-1-1996 |
供电与动力装置用低电压和常电压聚合绝缘电缆.总则 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - General) |
| BS 7870-2-1999 |
配电和发电设施用LV和MV聚合物绝缘电缆.试验方法 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test) |
| BS 7870-3.10-2001 |
供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有铜线或铝导体的PVC隔绝的 |
() |
| BS 7870-3.11-2001 |
供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有铜线或铝导体的XLPE隔绝 |
() |
| BS 7870-3.12-2001 |
供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.当有火焰影响时烟和腐蚀性 |
() |
| BS 7870-3.20-2001 |
供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有铜或铝导体的PVC隔绝的分 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with cop) |
| BS 7870-3.21-2001 |
供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有铜或铝导体的XLPE隔绝的 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with co) |
| BS 7870-3.40-2001 |
供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.有固态铝导体的铜线波型同心电缆 |
LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors |
| BS 7870-3.50-2005 |
配电和发电装置用低压和常压聚合绝缘电缆.额定电压为0.6/1KV的配电电缆规范.着火时轻微散发烟气和腐蚀性气体的有固态铝导体的铜线波型或螺旋型XLPE绝缘同轴电缆 |
|
| BS 7870-4.10-1999 |
配电和发电设施用低电压和常电压聚合物绝缘电缆.额定电压为11kV和33kV的挤压绝缘配电电缆的规范.单芯11kV和 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-co) |
| BS 7870-4.11-1999 |
配电和发电设施用低电压和常电压聚合物绝缘电缆.额定电压为11kV和33kV的挤压绝缘配电电缆的规范.单芯33kV的铅护套电缆 |
LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 33 kV lead sheathed cables |
| BS 7870-4.12-2001 |
供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为11KV和33KV的挤压绝缘配电电缆规范.单芯11KV金属薄 |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single co) |
| BS 7870-4.13-2001 |
供电与动力装置用低电压和常电压聚合绝缘电缆.额定电压为11KV和33KV的挤压绝缘配电电缆规范.单芯33KV铜线/ |
(LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single co) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com