标准号 |
中文名称 |
英文名称 |
| BS 879-2-1988 |
水井套管.第2部分:井套管和开缝井套管用热塑管规范 |
(Water well casing - Specification for thermoplastics tubes for casing and slotted casing) |
| BS 88-2.2-1988 |
低压熔断器.第2部分:专职人员使用的熔断器(主要是工业用熔断器)的补充要求.第1节:专职人员使用的标准熔断器 |
(Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (mainly for industrial application) - Additional requirements for fus) |
| BS 88-4-1988 |
电压达交流1000V(含)和直流1500V(含)的管状熔断器.第4部分:保护半导体器件用熔断体的补充要求规范 |
(Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuse-links for the protection of semiconductor devices) |
| BS 88-5-1988 |
电压达交流1000V(含)和直流1500V(含)的管状熔断器.第5部分:交流供电网用熔断体的补充要求规范 |
(Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuse-links for use in a.c. electricity supply networks) |
| BS 88-6-1988 |
电压达交流1000V(含)和直流1500V(含)的管状熔断器.第6部分:交流 240/415V工业和商业电气设备用的小尺寸熔断 |
(Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuses of compact dimensions for use in 240/415 V a.c. industrial and commer) |
| BS 8800-1996 |
职业健康和安全管理系统导则 |
(Guide to occupational health and safety management systems) |
| BS 8800-2004 |
职业健康和安全管理系统.指南 |
|
| BS 8855-2-2000 |
土壤分析.煤焦油衍生酚类化合物测定的方法 |
(Soil analysis - Method for determination of coal tar-derived phenolic compounds) |
| BS 887-1982 |
精密游标卡尺规范 |
(Specification for precision vernier callipers) |
| BS 8888-2002 |
技术产品文献(TPD).定义、详细说明和图形表示产品的规范 |
(Technical product documentation (TPD) - Specification for defining, specifying and graphically representing products) |
| BS 8888-2004 |
技术产品规范 |
|
| BS 89-2-1990 |
直接指示模拟电学测量仪表及其辅助设备.第2部分:电流表及电压表的特殊要求规范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for ammeters and voltmeters) |
| BS 89-3-1990 |
直接指示模拟电学测量仪表及其辅助设备.第3部分:瓦特表和无功功率表的特殊要求规范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for wattmeters and varmeters) |
| BS 89-4-1990 |
直接指示模拟电测量仪表及其附件.频率表的特殊要求规范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for frequency meters) |
| BS 89-5-1990 |
直接指示模拟电学测量仪表及其辅助设备.第5部分:相位表、功率因数表和同步指示器的特殊要求规范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for phase meters, power factor meters and synchroscopes) |
| BS 89-6-1990 |
直接指示模拟电学测量仪表及其辅助设备.第6部分:欧姆表(阻抗表)和电导率计的特殊要求规范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for ohmmeters (impedance meters) and conductance meters) |
| BS 89-7-1990 |
直接指示模拟电学测量仪表及其辅助设备.第7部分:多功能仪表的特殊要求规范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for multi-function instruments) |
| BS 89-8-1990 |
直接指示模拟电学测量仪表及其辅助设备.第8部分:辅助设备的特殊要求规范 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for accessories) |
| BS 89-9-1990 |
直接指示模拟电学测量仪表及其辅助设备.第9部分:推荐的试验方法 |
(Direct acting indicating analogue electrical measuring instruments and their accessories - Recommended test methods) |
| BS 893-1978 |
导管输送气体中粒状物质浓度的测量方法 |
(Method for the measurement of the concentration of particulate material in ducts carrying gases) |
| BS 894-1956 |
乌伯娄德流动点和滴点测定装置规范 |
(Specification for Ubbelohde apparatus for flow and drop points) |
| BS 896-1-1960 |
担架及担架支座规范.第1部分:尺寸 |
(Specification for stretchers and stretcher carriers - Dimensions) |
| BS 896-2-1965 |
担架及担架支座规范.第2部分:性能 |
(Specification for stretchers and stretcher carriers - Performance) |
| BS 8F 35-2002 |
航天航空用编织亚麻花边线绳 |
(Braided linen (flax) lacing cord for aerospace purposes) |
| BS 90-1975 |
直接作用的电记录仪表及附件规范 |
(Specification for direct-acting electrical recording instruments and their accessories) |
| BS 9000-1-1989 |
电子器件质量评定体系的一般要求.通用程序规范 |
(General requirements for a system for electronic components of assessed quality - Specification of general procedures) |
| BS 9000-2-1996 |
经质量评定的电子件系统的一般要求.第2部分:CECC国内采用规范 |
(General requirements for a system for electronic components of assessed quality - Specification for the national implementation of the CECC system) |
| BS 9000-3-1996 |
具有质量评定的电子件体系的一般要求.第3部分:IECQ体系国家执行程序规范 |
(General requirements for a system for electronic components of assessed quality - Specification for the national implementation of the IECQ system) |
| BS 9000-4-1991 |
经质量评定的电子件体系的一般要求.第4部分:一个组织的审定程序规范 |
(General requirements for a system for electronic components of assessed quality - Specification of procedures for the approval of an organization) |
| BS 9000-5-1989 |
电子器件质量评定体系的一般要求.资格鉴定和一致性试验程序规范 |
(General requirements for a system for electronic components of assessed quality - Specification of qualification approval and conformance testing procedures) |
| BS 9000-6-1989 |
电子器件质量评定体系的一般要求.能力鉴定程序规范 |
(General requirements for a system for electronic components of assessed quality - Specification of capability approval procedures) |
| BS 9000-7-1989 |
电子器件质量评定体系的一般要求.批量生产、交付步骤和认证试验记录规范 |
(General requirements for a system for electronic components of assessed quality - Specification of lot formation, release procedures and certified test records) |
| BS 903-0-2003 |
橡胶的物理试验.总则 |
(Physical testing of rubber - General) |
| BS 903-1-1995 |
橡胶的物理试验.第0部分:橡胶用试验方法的选择和使用指南 |
(Physical testing of rubber - Guide to the selection and use of methods of test for rubber) |
| BS 903-2-1997 |
橡胶的物理试验.橡胶试验统计应用导则 |
(Physical testing of rubber - Guide to the application of statistics to rubber testing) |
| BS 903-3-2003 |
橡胶的物理试验.可比单点数据的捕获和表示 |
(Physical testing of rubber - Acquisition and presentation of comparable single-point data) |
| BS 903-4-2003 |
橡胶的物理试验.可比多点数据的捕获和表示 |
(Physical testing of rubber - Acquisition and presentation of comparable multi-point data) |
| BS 903-5-2004 |
橡胶的物理试验.有限素分析的橡胶试验的应用指南 |
|
| BS 903-A1-1996 |
橡胶物理试验.密度测定 |
(Physical testing of rubber - Determination of density) |
| BS 903-A13-1990 |
橡胶的物理试验.第A13部分:低温劲度的测定方法(杰曼试验) |
(Physical testing of rubber - Method for determination of stiffness at low temperature (Gehman test)) |
| BS 903-A14-1992 |
橡胶的物理试验.第A14部分:剪切模量或刚性板粘着力的测定方法.四重剪切法 |
(Physical testing of rubber - Method for determination of modulus in shear or adhesion to rigid plates - Quadruple shear method) |
| BS 903-A15-1990 |
橡胶的物理试验.第A15部分:压缩或剪切蠕变的测定方法 |
(Physical testing of rubber - Method for determination of creep in compression or shear) |
| BS 903-A18-1973 |
橡胶的物理试验.第A18部分:平衡水蒸汽吸收的测定 |
(Physical testing of rubber - Determination of equilibrium water vapour absorption) |
| BS 903-A2-1995 |
橡胶的物理试验.拉伸应力-应变特性的测定 |
(Physical testing of rubber - Method for determination of tensile stress-strain properties) |
| BS 903-A21.1-1997 |
橡胶的物理试验.橡胶对金属粘接强度的测定.对硬物质的粘接.90度剥离方法 |
(Physical testing of rubber - Determination of rubber to metal bond strength - Adhesion to rigid substrates - 90 ?peel method) |
| BS 903-A21.2-1997 |
橡胶物理试验.橡胶对金属粘接强度的测定.对硬物质的粘接.两平板方法 |
(Physical testing of rubber - Determination of rubber to metal bond strength - Two plate method) |
| BS 903-A25-1992 |
橡胶的物理试验.第A25部分:低温脆性测定 |
(Physical testing of rubber - Determination of low-temperature brittleness) |
| BS 903-A26-1995 |
橡胶的物理试验.硬度的测定(10 IRHD-100 IRHD)方法 |
(Physical testing of rubber - Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)) |
| BS 903-A27-1986 |
橡胶的物理试验.第A27部分:橡胶对织物附着力的测定(直接拉力法) |
(Physical testing of rubber - Determination of rubber to fabric adhesion: direct tension method) |
| BS 903-A29-1997 |
橡胶的物理试验.低温收缩过程.低温特性的测定 |
(Physical testing of rubber - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)) |
| BS 903-A3-1995 |
橡胶的物理试验.抗撕裂强度的测定方法(裤形,角形和新月状试片) |
(Physical testing of rubber - Method for determination of tear strength (trouser, angle and crescent test pieces)) |
| BS 903-A3.2-1997 |
橡胶物理试验.撕裂强度的测定.小型试验片 |
(Physical testing of rubber - Determination of tear strength - Small (Delft) test pieces) |
| BS 903-A30-1996 |
橡胶的物理试验.第A30部分:橡胶透气性的测定(恒压法) |
(Physical testing of rubber - Determination of permeability to gases) |
| BS 903-A31-1976 |
橡胶的物理试验.第A31部分:用扭力摆测定橡胶的低频动态性能 |
(Physical testing of rubber - Determination of the low-frequency dynamic properties of rubbers by means of a torsion pendulum) |
| BS 903-A32-1988 |
硫化橡胶的试验方法.第A32部分:达到高于或低于正常试验温度方法的一般说明 |
(Physical testing of rubber - General directions for achieving elevated or subnormal temperatures for test purposes) |
| BS 903-A35-1995 |
橡胶的物理试验.第A35部分:试样试验的温度、湿度和时间条件 |
(Physical testing of rubber - Temperatures, humidities and times for conditioning and testing of test pieces) |
| BS 903-A36-1995 |
橡胶的物理试验.第A36部分:试样和试件的制备方法 |
(Physical testing of rubber - Method for preparation of samples and test pieces) |
| BS 903-A37-1997 |
橡胶的物理试验.对金属的附着力和金属腐蚀的测定 |
(Physical testing of rubber - Determination of tendency to adhere to and to corrode metals) |
| BS 903-A38-1991 |
橡胶的物理实验.第A38部分:试验用试件和制品尺寸的测定方法 |
(Physical testing of rubber - Methods for the determination of dimensions of test pieces and products for test purposes) |
| BS 903-A4-1990 |
橡胶的物理试验.第A4部分:压缩应力-应变特性的测定 |
(Physical testing of rubber - Determination of compression stress-strain properties) |
| BS 903-A40-1988 |
橡胶的物理试验.第A40部分:锥形零件对刚性材料附着力的测量 |
(Physical testing of rubber - Determination of adhesion to rigid materials using conical shaped parts) |
| BS 903-A43-1990 |
橡胶的物理试验.第A43部分:抗臭氧龟裂性的测定(静态应变试验) |
(Physical testing of rubber - Method for determination of resistance to ozone cracking (static strain test)) |
| BS 903-A44-1995 |
橡胶的物理试验.抗臭氧龟裂性的测定方法(动态应变试验) |
(Physical testing of rubber - Method of determination of resistance to ozone cracking (dynamic strain test)) |
| BS 903-A48-1984 |
橡胶的物理试验.第A48部分:对帘线静态附着力的测定(H抽出试验法) |
(Methods of testing vulcanized rubber - Determination of static adhesion to textile cord (H-pull test)) |
| BS 903-A49-1984 |
橡胶的物理试验.第A49部分:挠曲计试验中温升和耐疲劳性的测定(基本原理) |
(Physical testing of rubber - Determination of temperature rise and resistance to fatigue in flexometer testing (basic principles)) |
| BS 903-A50-1984 |
橡胶的物理试验.第A50部分:挠曲计试验中温升和耐疲劳性的测定(压缩挠曲计) |
(Methods of testing vulcanized rubber - Determination of temperature rise and resistance to fatigue in flexometer testing (compression flexometer)) |
| BS 903-A51-1986 |
橡胶的物理试验.第A51部分:耐拉伸疲劳性的测定 |
(Methods of testing vulcanized rubber - Determination of resistance to tension fatigue) |
| BS 903-A52-1986 |
橡胶的物理试验.第A52部分:在给定延伸率情况下,用应力测量法测定老化特性 |
(Physical testing of rubber - Determination of ageing characteristics by measurement of stress at a given elongation) |
| BS 903-A56-1989 |
橡胶的物理试验.第A56部分:对金属绳的附着力的测定 |
(Physical testing of rubber - Determination of adhesion to wire cord) |
| BS 903-A57-1997 |
橡胶的物理试验.用袖珍硬度计测定压痕硬度 |
(Physical testing of rubber - Determination of indentation hardness by means of pocket hardness meters) |
| BS 903-A58.1-2001 |
橡胶的物理试验.穆尼粘度计法.非染色的、油展的、乳胶聚合的丁苯橡胶(SBR)δ穆尼值的测定 |
(Physical testing of rubber - Methods using the Mooney viscometer - Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR) |
| BS 903-A59.1-1997 |
橡胶物理试验.用塑度计方法.快速塑化值的测定 |
(Physical testing of rubber - Methods using plastimeters - Determination of the rapid plasticity number) |
| BS 903-A59.2-1997 |
橡胶物理试验.用塑度计方法.生天然橡胶塑化延迟指数(PRI)的测定 |
(Physical testing of rubber - Methods using plastimeters - Determination of the plasticity retention index (PRI) of raw natural rubber) |
| BS 903-A6-1992 |
橡胶的物理试验.第A6部分:室温、高温和低温下压缩变形的测定方法 |
(Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures) |
| BS 903-A60.1-2000 |
橡胶物理试验.硫化计.硫化计使用指南 |
(Physical testing of rubber - Curemetering - Guide to the use of curemeters) |
| BS 903-A60.2-1992 |
橡胶物理试验.硫化计.用振动园盘硫化计对硫化特性的测定方法 |
(Physical testing of rubber - Curemetering - Method for the determination of vulcanization characteristics using an oscillating disc curemeter) |
| BS 903-A62-1993 |
橡胶的物理试验.未硫化化合物生橡胶的湿态强度测定方法 |
(Physical testing of rubber - Method for determination of green strength of raw rubber of unvulcanized compounds) |
| BS 903-A63-1995 |
橡胶的物理试验.硬度测量结晶效应的测定方法 |
(Physical testing of rubber - Method for determination of crystallization effects by hardness measurements) |
| BS 903-A64-1995 |
橡胶的物理试验.第A64部分:橡胶试验混合料的制备、混合和硫化方法 |
(Physical testing of rubber - Method for the preparation, mixing and vulcanization of rubber test mixes) |
| BS 903-A8-1990 |
橡胶的物理试验.第A8部分:弹性的测定方法 |
(Physical testing of rubber - Method for determination of rebound resilience) |
| BS 903-C1-1991 |
橡胶的物理试验.表面电阻系数的测定 |
(Physical testing of rubber - Determination of surface resistivity) |
| BS 903-C2-1982 |
橡胶的物理试验.体积电阻系数的测定 |
(Physical testing of rubber - Determination of volume resistivity) |
| BS 903-C5-1992 |
橡胶的物理试验.第C5部分:绝缘电阻的测定.塑料的试验方法.电气性质.绝缘电阻的测定 |
(Physical testing of rubber - Determination of insulation resistance) |
| BS 9031-1971 |
经质量评定的固定频率脉冲磁控管详细规范的制定规则 |
(Rules for the preparation of detail specifications for pulsed fixed-frequency magnetrons of assessed quality) |
| BS 9032-1975 |
经质量评定的脉冲磁控管(不包括频率捷变磁控管)详细规范的制定规则.基本评定级 |
(Rules for the preparation of detail specifications for pulsed magnetrons (excluding frequency-agile magnetrons) of assessed quality - Basic assessment level) |
| BS 9040-1978 |
经质量评定的充气微波开关管规范.通用数据和试验方法 |
(Specification for gas-filled microwave switching tubes of assessed quality: generic data and methods of test) |
| BS 9041-1978 |
经质量评定的充气微波开关详细规范的制定规则.可调和宽频带TR管与TR限幅器.全部评定级 |
(Rules for the preparation of detail specifications for gas filled microwave switching tubes of assessed quality: tunable and broadband TR tubes and TR limiters - Full assessment level) |
| BS 9054-1971 |
经质量评定的雷达显示阴极射线管详细规范的制定规则 |
(Rules for the preparation of detail specifications for radar display cathode ray tubes of assessed quality) |
| BS 906-1-1972 |
工程平行板规范.第1部分:米制单位 |
(Specification for engineers’ parallels - Metric units) |
| BS 906-2-1972 |
工程平行板规范.第2部分:英制单位 |
(Specification for engineers’ parallels - Imperial units) |
| BS 907-1965 |
线性测量用千分表规范 |
(Specification for dial gauges for linear measurement) |
| BS 9070 N002-1971 |
经质量评定的 C2AED型固定云母介质电容器详细规范.单面中心引线矩形非金属壳.一般应用范围 |
(Detail specification for fixed metallized mica dielectric capacitors (style C2AED) - Rectangular non-metallic case, centred wires on one face - General application category) |
| BS 9070 N003-1971 |
经质量评定的 C2AEA型固定云母介质电容器详细规范.两端轴向引线矩形非金属壳.一般应用范围 |
(Detail specification for fixed metallized mica dielectric capacitors (style C2AEA) - Rectangular non-metallic case, axial wires at both ends - General application category) |
| BS 9070 Secs.1 and 2-1969 |
经过质量评估的固定式电容器的规范.一般数据和试验方法.原则和强制规程.起草详细规范的一般规则 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Principles and mandatory procedures - General rules for drafting detail specifications) |
| BS 9070-3-1970 |
经质量评定的固定电容器规范.一般数据和试验方法.第3节:钽介质电容器 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Tantalum electrolytic capacitors) |
| BS 9070-4-1971 |
经质量评定的固定电容器规范.一般数据和试验方法.第4节:聚苯乙烯介质电容器 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Polystyrene dielectric capacitors) |
| BS 9070-5-1971 |
经质量评定的固定电容器规范.一般数据和试验方法.第5节:陶瓷介质电容器 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Ceramic dielectric capacitors) |
| BS 9070-6-1971 |
经质量评定的固定电容器规范.一般数据和试验方法.第6节:直流用聚碳酸酯介质电容器和聚乙烯对苯二甲酸酯介质 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Polycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use and pol) |
| BS 9070-7-1971 |
经质量评定的固定电容器规范.一般数据和试验方法.云母介质电容器 |
(Specification for fixed capacitors of assessed quality: generic data and methods of test - Mica dielectric capacitors) |
| BS 9073 N0034-1978 |
固定钽介质电容器详细规范.极性非固体介质多孔阳极.轴向引线端接管状绝缘金属壳PTFE/弹性密封.全面的附加评 |
(Detail specification for fixed tantalum electrolytic capacitors - Porous anode, polar non-solid electrolyte - Tubular insulated metallic case, PTFE/elastomer seal, axial wire terminations - Full plus) |
| BS 9074 N002-1974 |
固定聚苯乙烯薄膜介质电容器详细规范.轴向端接管状绝缘壳.全面评定级 |
(Detail specification for fixed polystyrene foil dielectric capacitors - Tubular insulated case, axial terminations - Full asessment level) |
| BS 9074 N007-1981 |
聚苯乙烯薄膜介质扩展箔电容器详细规范.单向端接矩形非金属壳.全面附加评定级 |
(Detail specification for polystyrene film dielectric capacitors, extended foil - Rectangular non-metallic case, unidirectional terminations - Full plus additional assessment level) |
| BS 9075 N023-1978 |
固定单片陶瓷介质电容器(1B型)详细规范.单面中心引线矩形非金属壳.全面评定级 |
(Detail specification for fixed monolithic ceramic dielectric capacitors (type 1B) - Rectangular non-metallic case, centred wires on one face - Full assessment level) |
| BS 9075 N024-1978 |
固定单片陶瓷介质电容器(2C1型)详细规范.单面中心引线矩形非金属壳.全面评定级 |
(Detail specification for fixed monolithic ceramic dielectric capacitors (type 2C1) - Rectangular non-metallic case, centred wires on one face - Full assessment level) |
| BS 9076 N001 to 004-1974 |
固定金属化聚乙烯对苯二甲酸乙二酯薄膜或金属化聚碳酸酯薄膜介质电容器详细规范.中间隔开轴向或辐射引线矩 |
(Detail specification for fixed metallized polyethylene terephthalate (PETP) film or metallized polycarbonate film dielectric capacitors - Rectangular non-metallic case axial or radial terminations, ce) |
| BS 9093-1979 |
微调可变电容器(C型)的详细规范的制定规则.全面评定级 |
(Rules for the preparation of detail specifications for variable pre-set capacitors, type C (full assessment level)) |
| BS 91-1998 |
电缆焊接插座.规范 |
(Electric cable soldering sockets - Specification) |
| BS 9100-1983 |
定制的电容器和电容器模件的性能鉴定规范.通用数据和试验方法 |
(Specification for capability approval for custom-built capacitors and capacitor modules: generic data and methods of test) |
| BS 9130-1972 |
经质量评定的电位器规范.通用数据和试验方法 |
(Specification for potentiometers of assessed quality: generic data and methods of test) |
| BS 9131 N001 to 016-1974 |
导杆驱动线绕或非线绕预调电位器详细规范.长方形和正方形、密封容器、驱动装置与电阻件绝缘、在移动每端 |
(Detail specification for lead-screw actuated wirewound or non-wirewound preset potentiometers - Rectangular and square forms, container sealed, actuating device insulated from resistive element, slipp) |
| BS 9133 N001 to 003-1975 |
单旋非线绕小功率旋转电位器详细规范.轴与电阻件绝缘、轴和控制板封装或有外壳、轴和控制板封装.全面评定 |
(Detail specification for single turn low power non-wirewound rotary potentiometers - Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed - Full a) |
| BS 9133-1973 |
经质量评定的单匝小功率旋转电位器详细规范的制定规则 |
(Rules for the preparation of detail specifications for single turn low power rotary potentiometers of assessed quality) |
| BS 9151-1972 |
经质量评定的“有“或“无“继电器详细规范的制订规则.所有的和基本的评定级别 |
(Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality - Full and basic assessment levels) |
| BS 919-1-1960 |
螺纹规极限和公差规范.第1部分:统一型螺纹量规 |
(Specification for screw gauge limits and tolerances - Gauges for screw threads of Unified form) |
| BS 919-2-1971 |
螺纹规极限和公差规范.第2部分:惠氏螺纹量规及英制螺纹量规 |
(Specification for screw gauge limits and tolerances - Gauges for screw threads of Whitworth and BA forms) |
| BS 919-3-1968 |
螺纹规极限和公差规范.第3部分:ISO 米制螺纹量规 |
(Specification for screw gauge limits and tolerances - Gauges for ISO metric screw threads) |
| BS 919-4-1964 |
螺纹规极限和公差规范.第4部分:直径 1/4英寸以上(含 1/4英寸)的统一型螺纹量规的尺寸极限 |
(Specification for screw gauge limits and tolerances - Limits of size for gauges for screw threads of Unified form diameters) |
| BS 921-1976 |
电气用橡胶垫规范 |
(Specification - Rubber mats for electrical purposes) |
| BS 9210 N0009-1-1978 |
射频连接器(SMC系列)详细规范.不密封、焊接、静态接触、50Ω、螺纹连接.全面评定级 |
(Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Full assessment level) |
| BS 9210 N0009-2-1978 |
射频连接器(SMA系列)详细规范.不密封、焊接、静态接触、50Ω、螺纹连接.控制图.配合面详图和测量数据 |
(Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings - Mating face details and gauge information) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com