标准号 |
中文名称 |
英文名称 |
| BS EN ISO 6860-1985 |
涂料和清漆.弯曲试验(圆锥心轴) |
(Paints and varnishes - Bend test (conical mandrel)) |
| BS EN ISO 6867-2001 |
动物饲料.用高效液相色谱法测定维生素E的含量 |
(Animal feeding stuffs - Determination of vitamin E content - Method using high-performance liquid chromatography) |
| BS EN ISO 6869-2001 |
动物饲料.钙,铜,铁,镁,锰,钾,钠和锌含量的测定.使用原子吸收光谱法 |
(Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry) |
| BS EN ISO 6871-1-1997 |
牙科基本金属铸造合金.第1部分:钴合金 |
(Dental base metal casting alloys - Cobalt-based alloys) |
| BS EN ISO 6871-2-1997 |
牙科基本金属铸造合金.第2部分:镍基合金 |
(Dental base metal casting alloys - Nickel-based alloys) |
| BS EN ISO 6872-1999 |
牙科烤瓷 |
(Dental ceramic) |
| BS EN ISO 6873-2000 |
牙科石膏制品 |
(Dental gypsum products) |
| BS EN ISO 6875-1997 |
牙科设备.牙科病人用椅 |
(Dental equipment - Dental patient chair) |
| BS EN ISO 6876-2002 |
牙科牙根管封闭材料 |
(Dental root canal sealing materials) |
| BS EN ISO 6877-1998 |
牙科用牙根管充填针 |
(Dental root-canal obturating points) |
| BS EN ISO 6878-2004 |
水质.磷的测定.钼酸铵的光谱测定法 |
|
| BS EN ISO 6887-1-1999 |
食品和动物饲料制品微生物学.试样准备及用于微生物检验的初始悬浮液和十倍制稀释液.初始悬浮液和十倍制稀释 |
(Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - General rules for the preparation of the initia) |
| BS EN ISO 6887-2-2003 |
食品和动物饲料的微生物学.用于微生物检验的试验样品的初始悬浮液和十倍稀释液的制备.肉和肉制品制备的特殊 |
(Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of meat and) |
| BS EN ISO 6887-3-2003 |
食品和动物饲料的微生物学.用于微生物检验的试验样品的初始悬浮和十倍制稀释的准备.鱼和水产品准备的特殊规 |
(Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of fish and) |
| BS EN ISO 6887-4-2003 |
食品和动物饲料的微生物学.用于微生物检验的试验样品的初始悬浮和十倍制稀释的准备.除奶和奶制品、肉和肉制 |
() |
| BS EN ISO 6888-1-1999 |
食品和动物饲料微生物学.阳性葡萄球菌和其它属的凝胶水平计数方法.用Baird-Parke琼脂培养基技术 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Technique using Baird-Parker agar) |
| BS EN ISO 6888-2-1999 |
食品和动物饲料微生物学.阳性葡萄球菌和其它属的凝胶水平计数方法.兔原生质血纤蛋白质琼脂培养基技术 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Technique using rabbit plasma fibrinogen agar medium |
| BS EN ISO 6888-3-2003 |
食品和动物饲料微生物学.凝血酶阳性葡萄球菌(金黄色葡萄球菌及其他种)计数的水平方法.低数值探测和MPN技术 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Detection and MPN technique for l) |
| BS EN ISO 6926-2000 |
声学.声功率级测定用基准声源的性能和校正要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels |
| BS EN ISO 6940-1995 |
纺织纤维.耐燃烧.垂直定向样品易燃性的测定 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens |
| BS EN ISO 6940-2004 |
纺织织物.燃烧性能.垂直向样品易点燃性的测定 |
|
| BS EN ISO 6941-2004 |
纺织织物.燃烧性能.垂直向样品火焰蔓延性的测定 |
|
| BS EN ISO 6942-2002 |
防护服.对热和火的防护.评估暴露到热辐射源的材料和材料组件的试验方法 |
(Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat) |
| BS EN ISO 6945-1996 |
橡胶软管.外涂层耐磨性的测定 |
(Rubber hoses - Determination of abrasion resistance of the outer cover) |
| BS EN ISO 6946-1997 |
建筑物组件和建筑物构件.热阻和热传递率.计算方法 |
Building components and building elements - Thermal resistance and thermal transmittance - Calculation method |
| BS EN ISO 6947-1997 |
焊接.工作状态.倾角和转动的定义 |
(Welds - Working positions - Definitions of angles of slope and rotation) |
| BS EN ISO 6974-1-2000 |
天然气.用气相色谱法测定规定的不确定度的组分.简明分析导则 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Guidelines for tailored analysis) |
| BS EN ISO 6974-2-2001 |
天然气.用气相色谱法测定规定的不确定度的组分.测量系统特性和数据处理统计 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data) |
| BS EN ISO 6974-3-2000 |
天然气.用气相色谱法测定规定不确定度的组分.利用两个封装柱测定氢、氦、氧、氮、二氧化碳和 C8 碳氢化合物 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two pack) |
| BS EN ISO 6974-4-2000 |
天然气.用气相色谱法测定规定不确定度的组分.利用两个封装柱实验室在线测量系统测定氮、二氧化碳和C1 到 C5 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line mea) |
| BS EN ISO 6974-5-2000 |
天然气.用气相色谱法测定规定不确定度的组分.利用三个封装柱实验室在线过程应用系统测定氮、二氧化碳和C1 |
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line pro) |
| BS EN ISO 6988-1986 |
金属涂层和其它无机物涂层.在一般水分冷凝作用下的二氧化硫试验 |
(Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture) |
| BS EN ISO 7027-2000 |
水质.混浊度的测定 |
(Water quality - Determination of turbidity) |
| BS EN ISO 7029-2000 |
声学.作为龄期函数的听力阈的统计分布 |
(Acoustics - Statistical distribution of hearing thresholds as a function of age) |
| BS EN ISO 703-1-2000 |
传送带.横向挠性和可成槽形性.试验方法 |
(Conveyor belts - Transverse flexibility and troughability - Test method) |
| BS EN ISO 7040-1998 |
1型通用扭矩六角螺母(用非金属垫圈).性能类别5、8和10 |
(Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and 10) |
| BS EN ISO 7042-1998 |
2型常用扭矩全金属六角螺母.性能类别5、8、10和12 |
(Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12) |
| BS EN ISO 7045-1995 |
Z型和H型十字凹平头螺钉.A级产品 |
(Pan head screws with type H or type Z cross recess - Product grade A) |
| BS EN ISO 7046-1-1994 |
H型或Z型十字槽沉头螺钉(圆头型).A级产品.4.8类性能钢 |
(Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A. Countersunk flat head screws (common head style) with type H or type Z cross recess - Product gra) |
| BS EN ISO 7046-2-1995 |
H型和Z型十字埋凹头螺钉.A级产品.8.8类,不锈钢和非铁类金属钢特性 |
(Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A. Steel of property class 8.8, stainless steel and non-ferrous metals) |
| BS EN ISO 7047-1995 |
H型和Z型十字凹埋头螺钉(普通型).A级产品 |
(Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A) |
| BS EN ISO 7048-1999 |
十字槽圆头螺钉 |
(Cross recessed cheese head screws) |
| BS EN ISO 7049-1995 |
十字凹头丝锥螺钉 |
(Cross recessed pan head tapping screws) |
| BS EN ISO 7050-1995 |
十字凹埋头丝锥螺钉(普通型)规范 |
(Specification for cross-recessed countersunk (flat) head tapping screws (common head style)) |
| BS EN ISO 7051-1995 |
十字凹头开槽丝锥螺钉规范 |
(Specification for cross-recessed raised countersunk (oval) head tapping screws) |
| BS EN ISO 707-1997 |
奶乳和乳制品.取样导则 |
(Milk and milk products - Guidance on sampling) |
| BS EN ISO 7083-1995 |
技术制图.几何形位公差的符号.比例和尺寸 |
(Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions) |
| BS EN ISO 7085-1999 |
表面淬火和回火的米制滚螺纹螺钉的机械和性能要求 |
(Mechanical and performance requirements of case hardened and tempered metric thread rolling screws) |
| BS EN ISO 7089-2000 |
平垫圈.标准系列.产品等级A |
(Plain washers - Normal series - Product grade A) |
| BS EN ISO 7090-2000 |
倒角平垫圈.标准系列.产品等级A |
(Plain washers, chamfered - Normal series - Product grade A) |
| BS EN ISO 7091-2000 |
平垫圈.标准系列.产品等级C |
(Plain washers - Normal series - Product grade C) |
| BS EN ISO 7092-2000 |
平垫圈.小型系列.产品等级A |
(Plain washers - Small series - Product grade A) |
| BS EN ISO 7093-1-2000 |
平垫圈.大型系列.产品等级A |
(Plain washers - Large series - Product grade A) |
| BS EN ISO 7093-2-2000 |
平垫圈.大型系列.产品等级C |
(Plain washers - Large series - Product grade C) |
| BS EN ISO 7094-2000 |
平垫圈.超大型系列.产品等级C |
(Plain washers - Extra large series - Product grade C) |
| BS EN ISO 7096-2000 |
土方机械.驾驶员座椅振动的实验室评价 |
(Earth-moving machinery - Laboratory evaluation of operator seat vibration) |
| BS EN ISO 7142-2004 |
色漆和清漆用粘合剂.环氧树脂.通用试验方法 |
|
| BS EN ISO 717-1-1997 |
声学.建筑物和建筑物构件内的隔音测定.第1部分:建筑物和内部建筑物构件的气载音响隔离 |
(Acoustics - Rating of sound insulation in buildings and of building elements - Airborne sound insulation) |
| BS EN ISO 717-2-1997 |
声学.建筑物和建筑物构件内的隔音测定.第2部分:撞击音响的隔离 |
(Acoustics - Rating of sound insulation in buildings and of building elements - Impact sound insulation) |
| BS EN ISO 7200-2004 |
技术产品文献.标题栏和文献标题的数据区域 |
|
| BS EN ISO 7208-2000 |
脱脂乳、乳清和乳酪.脂肪含量的测定.重量分析法(基准方法) |
(Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method (reference method)) |
| BS EN ISO 7214-1998 |
泡沫塑料.聚乙烯.试验方法 |
(Cellular plastics - Polyethylene - Methods of test) |
| BS EN ISO 7231-1998 |
泡沫柔性聚合材料.恒定压降下的气流值估计法 |
(Polymeric materials, cellular flexible - Method of assessment of air flow value at constant pressure-drop) |
| BS EN ISO 7233-1992 |
橡胶和塑料软管以及软管部件.吸入阻力的测定 |
(Rubber and plastics hoses and hose assemblies - Determination of suction resistance) |
| BS EN ISO 7235-2003 |
声学.管道消音器和气体终端设备的实验室测量步骤.插入损失、流动噪声和总压损失 |
(Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss) |
| BS EN ISO 7250-1998 |
技术设计的基本人体测量 |
(Basic human body measurements for technological design) |
| BS EN ISO 7263-1995 |
瓦楞纸.试验起瓦楞后耐压扁性的测定 |
(Corrugating medium - Determination of the flat crush resistance after laboratory fluting) |
| BS EN ISO 7278-1-1990 |
液态烃.动态测量.容积式流量计试验系统.第1部分:一般原理 |
(Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - General principles) |
| BS EN ISO 7278-2-1990 |
液态烃.动态测量.容量计用验证系统.第2部分:管式校准仪 |
(Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pipe provers) |
| BS EN ISO 7284-1996 |
电阻焊设备.汽车工业用多点点焊的两个单独副线圈的变压器详细规范 |
(Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry) |
| BS EN ISO 7287-2002 |
热切割设备用图形符号 |
(Graphical symbols for thermal cutting equipment) |
| BS EN ISO 7291-2001 |
气焊设备.小于等于300bar的焊接、切削及相关工艺用多头管系用压力调节器 |
(Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar) |
| BS EN ISO 7327-1996 |
塑料.环氧树脂用固化剂和催化剂.酸酐中游离酸测定 |
(Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride) |
| BS EN ISO 7328-2000 |
以奶为基料的食用冰制品和冰配制食品.脂肪含量的测定.重量分析法(基准方法) |
(Milk based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method)) |
| BS EN ISO 7345-1996 |
热绝缘.物理量与定义 |
(Thermal insulation - Physical quantities and definitions) |
| BS EN ISO 7346-1-1998 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))急性致死的物质毒性的测定.静态法 |
(Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Static method) |
| BS EN ISO 7346-2-1998 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))急性致死物质毒性的测定.半静态法 |
(Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Semi-static method) |
| BS EN ISO 7346-3-1998 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))急性致死物质毒性的测定.流量法 |
(Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Flow-through method) |
| BS EN ISO 7369-2004 |
管道.金属软管和软管组件.词汇 |
|
| BS EN ISO 7371-1996 |
家用冷冻设备.有或没有低温隔层的冰箱.特征和试验方法 |
(Household refrigerating appliances - Refrigerators with or without low temperature compartment - Characteristics and test methods) |
| BS EN ISO 7376-2004 |
麻醉和呼吸设备.气管插管术用喉镜 |
|
| BS EN ISO 7376-2004 |
麻醉和呼吸设备.气管插管术用喉镜 |
|
| BS EN ISO 7380-1998 |
六角型套解圆头螺纹 |
(Hexagon socket button head screws) |
| BS EN ISO 7380-2004 |
内六角平圆头螺钉 |
|
| BS EN ISO 7384-1995 |
模拟大气腐蚀试验.通则 |
(Corrosion tests in artificial atmospheres - General requirements) |
| BS EN ISO 7389-2003 |
房屋建筑.连接件.密封件回弹性的测定 |
(Building construction - Jointing products - Determination of elastic recovery of sealants) |
| BS EN ISO 7390-2004 |
房屋建筑.连接件.密封剂的耐流动性测定 |
|
| BS EN ISO 7405-1997 |
牙科学.牙科医疗设备生物分解性的疾病前评定.牙科材料的试验方法 |
(Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials) |
| BS EN ISO 7437-1996 |
技术制图.建筑制图.预制结构件的生产图纸的一般规则 |
(Technical drawings - Construction drawings - General rules for execution of production drawings for prefabricated structural components) |
| BS EN ISO 7438-2000 |
金属材料.弯曲试验 |
(Metallic materials - Bend test) |
| BS EN ISO 7439-2002 |
含铜的宫内节育避孕器具.要求、试验 |
(Copper-bearing intra-uterine contraceptive devices - Requirements, tests) |
| BS EN ISO 7441-1995 |
金属和合金的耐腐蚀性.在露天暴露腐蚀试验中双金属腐蚀性的测定 |
(Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests) |
| BS EN ISO 7458-2004 |
玻璃容器.耐内压力.试验方法 |
|
| BS EN ISO 7459-2004 |
玻璃容器.抗热震性和热震耐久性.试验方法 |
|
| BS EN ISO 7459-2004 |
玻璃容器.抗热震性和热震耐久性.试验方法 |
|
| BS EN ISO 748-2000 |
明渠液体流量测量.速度面积法 |
(Measurement of liquid flow in open channels - Velocity-area methods) |
| BS EN ISO 7488-1996 |
牙科用混汞器 |
(Dental amalgamators) |
| BS EN ISO 7490-2001 |
牙科用石膏粘接铸造熔模 |
(Dental gypsum-bonded casting investments) |
| BS EN ISO 7491-2000 |
牙科材料.颜色稳定性的测定 |
(Dental materials - Determination of colour stability) |
| BS EN ISO 7492-1997 |
牙科探测器 |
(Dental explorers) |
| BS EN ISO 7493-2000 |
牙科医生凳 |
(Dental operator’s stool) |
| BS EN ISO 7494-2-2003 |
牙科学.牙科装置.供水和供气 |
(Dentistry - Dental units - Water and air supply) |
| BS EN ISO 75-1-1994 |
塑料.载荷下偏转温度的测定.第1部分:一般试验方法 |
(Plastics - Determination of temperature of deflection under load - General test method) |
| BS EN ISO 75-1-2004 |
塑料.载荷下挠曲温度的测定.一般试验方法 |
|
| BS EN ISO 75-2-1994 |
塑料.载荷下偏转温度的测定.第2部分:塑料和橡木 |
(Plastics - Determination of temperature of deflection under load - Plastics and ebonite) |
| BS EN ISO 75-2-2004 |
塑料.载荷下挠曲温度的测定.塑料、硬橡胶和长纤维增强合成物 |
|
| BS EN ISO 75-3-1994 |
塑料.载荷下偏转温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 |
(Plastics - Determination of temperature of deflection under load - High-strength thermosetting laminates and long-fibre-reinforced plastics) |
| BS EN ISO 75-3-2004 |
塑料.载荷下挠曲温度的测定.高强度热固性叠层板材 |
|
| BS EN ISO 7500-1-1999 |
金属材料.静态单轴向试验机的鉴定.拉伸和压缩试验机.测力系统的鉴定和校准 |
(Metallic materials - Verification of static uniaxial testing machines - Tension/compression testing machines - Verification and calibration of the force-measuring system) |
| BS EN ISO 7500-1-2004 |
金属材料.静态单轴向试验机的鉴定.拉伸和压缩试验机.测力系统的鉴定和校准 |
|
| BS EN ISO 7500-2-1999 |
金属材料.静态单轴向试验机的校正.拉伸蠕变试验机.对作用负载力的校验 |
(Metallic materials - Verification of static uniaxial testing machines - Tension creep testing machines - Verification of the applied load) |
| BS EN ISO 7518-1999 |
建筑制图.拆除和重建的简化表示法 |
(Construction drawings - Simplified representation of demolition and rebuilding) |
| BS EN ISO 7519-1997 |
技术制图.建筑制图.总体布置图和构件图表示法的一般原理 |
(Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings) |
| BS EN ISO 7536-1996 |
石油及其产品的试验方法.石油产品.汽油耐氧化性测定.诱导期方法 |
(Methods of test for petroleum and its products - Petroleum products - Determination of oxidation stability of gasoline - Induction period method) |
| BS EN ISO 7539-1-1988 |
金属和合金的腐蚀.腐蚀应力试验.第1部分:试验程序的通用指南 |
(Corrosion of metals and alloys - Stress corrosion testing - General guidance on testing procedures) |
| BS EN ISO 7539-2-1990 |
金属和合金的腐蚀.应力腐蚀试验.第2部分:弯曲梁试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of bent-beam specimens) |
| BS EN ISO 7539-3-1990 |
金属和合金的耐腐蚀性.应力腐蚀试验.第3部分:U型弯曲试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of U-bend specimens) |
| BS EN ISO 7539-4-1990 |
金属和合金的腐蚀.应力腐蚀试验.第4部分:单向载荷拉伸试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of uniaxially loaded tension specimens) |
| BS EN ISO 7539-5-1990 |
金属和合金的腐蚀.应力腐蚀试验.第5部分:C-环形试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Method for the preparation and use of C-ring specimens) |
| BS EN ISO 7539-6-2003 |
金属和合金的腐蚀.应力腐蚀试验.恒定负荷或恒定位移条件下试验用预破裂试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Preparation and use of pre-cracked specimens for tests under constant load or constant displacement) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com