标准号 |
中文名称 |
英文名称 |
BS ISO 8434-3-2005 |
用于液压传动和一般用途的金属管接头.O形圈端面密封管接头 |
|
BS ISO 8439-1991 |
格式设计.基本形式 |
Forms design - Basic layout |
BS ISO 844-2001 |
泡沫塑料.硬质材料的压缩试验.规范 |
Cellular plastics - Compression test for rigid materials - Specification |
BS ISO 844-2004 |
硬性泡沫塑料.压缩性能的测定 |
|
BS ISO 844-2004 |
硬性泡沫塑料.压缩性能的测定 |
|
BS ISO 8443-1999 |
滚动轴承.带法兰外圈的径向滚珠轴承.法兰尺寸 |
Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions |
BS ISO 8459-2-1993 |
信息和文献.书目数据字典.检索应用 |
Information and documentation - Bibliographic data element directory - Acquisitions applications |
BS ISO 8459-3-1995 |
信息和文献.书目数据字典.信息检索应用 |
Information and documentation - Bibliographic data element directory - Information retrieval applications |
BS ISO 8486-1-1997 |
粘合磨料.粒度分布的测定和名称与符号.第1部分:粒度从F4至F220 |
(Bond abrasives - Determination and designation of grain size distribution - Macrogrits F4 to F220) |
BS ISO 8486-2-1997 |
粘合磨料.粒度分布的测定、名称与符号.第2部分:粒度从F230至F1200 |
Bond abrasives - Determination and designation of grain size distribution - Macrogrits F230 to F1200 |
BS ISO 8503-5-2003 |
涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.表面轮廓测定的复制带法 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Replica tape method for the determination of t) |
BS ISO 8514-1-2000 |
缩微摄影技术.字母数字计算机输出缩微品.质量控制.试验滑片和试验数据的特征 |
Micrographics - Alphanumeric computer output microforms - Quality control - Characteristics of the test slide and test data |
BS ISO 8514-2-2000 |
显微摄影.字母数字计算机输出缩微品.质量控制.方法 |
Micrographics - Alphanumeric computer output microforms - Quality control - Method |
BS ISO 8529-1-2001 |
基准中子辐射.特性和生产方法 |
Reference neutron radiations - Characteristics and methods of production |
BS ISO 8529-2-2001 |
标准中子辐射.与以辐射场为表征的基本量有关的辐射保护装置的校准规则 |
Reference neutron radiations - Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field |
BS ISO 8529-3-1999 |
标准中子辐射.第3部分:区域及个人剂量计的校正和对中子能功能及入射角的反应测定 |
Reference neutron radiations - Calibration of area and personal dosimeters and determination of their response as a function of neutron energy and angle of incidence |
BS ISO 8532-1997 |
证券.证券号码传输格式 |
Securities - Format for transmission of certificate numbers |
BS ISO 8535-1-1997 |
压燃式发动机.高压喷射燃油管用的钢管.无缝冷拔单壁管的要求 |
Compression ignition engines - Steel tubes for high pressure fuel injection pipes - Requirements for seamless cold drawn single wall tubes |
BS ISO 8535-2-2004 |
压燃式发动机.高压燃油喷管用钢管.合成管的要求 |
|
BS ISO 8536-5-2004 |
医用输液器具.一次性使用的重力输液滴定管式输液器 |
|
BS ISO 8543-1998 |
铺地织物.质量(物质)测定方法 |
Textile floor coverings - Methods for determination of mass |
BS ISO 8548-4-1998 |
修复术和矫形学.肢缺陷.导致切断的原因描述 |
Prosthetics and orthotics - Limb deficiencies - Description of causal conditions leading to amputation |
BS ISO 8548-5-2003 |
修复术和矫形学.肢缺陷.实施切除手术的病人的临床状况描述 |
(Prosthetics and orthotics - Limb deficiencies - Description of the clinical condition of the person who has had an amputation) |
BS ISO 855-2003 |
用压榨法获得的柠檬油 |
(Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression) |
BS ISO 8551-2003 |
修复术和矫形学.功能缺陷.将进行矫形的病人、临床处理目标和矫形功能要求的描述 |
(Prosthetics and orthotics - Functional deficiencies - Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis) |
BS ISO 8552-2004 |
牛奶.嗜冷营养微生物的估测.21鳦时菌落计数技术(快速法) |
|
BS ISO 8566-4-1998 |
起重机.驾驶室.第3部分:悬臂式起重机 |
(Cranes - Cabins - Jib cranes) |
BS ISO 8567-2003 |
电影.35mm和16mm电影发行拷贝上说明字幕的最大允许区域.尺寸和位置 |
(Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions) |
BS ISO 8573-1-2001 |
一般用途压缩空气.杂质和纯度等级 |
Compressed air for general use - Contaminants and purity classes |
BS ISO 8573-2-1996 |
通用压缩空气.气溶胶油含量的测定试验法 |
Compressed air for general use - Test methods for aerosol oil content |
BS ISO 8573-3-1999 |
一般用压缩空气.潮湿度测定的试验方法 |
Compressed air for general use - Test methods for measurement of humidity |
BS ISO 8573-4-2001 |
一般用途的压缩空气.固体颗粒含量的试验方法 |
Compressed air for general use - Test methods for solid particle content |
BS ISO 8573-5-2002 |
一般用压缩空气.油汽和有机溶剂含量的试验方法 |
Compressed air for general use - Test methods for oil vapour and organic solvent content |
BS ISO 8573-6-2003 |
一般用途压缩空气.气体污染物含量的试验方法 |
(Compressed air for general use - Test methods for gaseous contaminant content) |
BS ISO 8573-7-2003 |
压缩空气.活微生物杂质含量的试验方法 |
(Compressed air for general use - Test method for viable microbiological contaminant content) |
BS ISO 8573-8-2004 |
一般用途压缩空气.通过质量浓度测定固体颗粒含量的试验方法 |
|
BS ISO 8573-9-2004 |
一般用途压缩空气.液体水含量的试验方法 |
|
BS ISO 8579-1-2002 |
齿轮装置验收规程.空气噪声试验规程 |
Acceptance code for gear units - Test code for airborne sound |
BS ISO 8581-1995 |
摄影技术.电子闪光设备.同步线连接器 |
Photography - Electronic flash equipment - Connectors to synchro-cord |
BS ISO 8584-1-1998 |
工业用承压热塑性塑料管.耐化学性系数和基本应力的测定.聚烯烃管 |
Thermoplastics pipes for industrial applications under pressure - Determination of the chemical resistance factor and of the basic stress - Polyolefin pipes |
BS ISO 8590-1995 |
电影摄影技术.在带有磁条的70mm电影发行拷贝上的录音.录音特性 |
(Cinematography - Audio records on 70 mm motion picture release prints with magnetic stripes - Recorded characteristic) |
BS ISO 8600-1-1997 |
光学和光学仪器.医疗内诊镜和内诊镜附件.第1部分:一般要求 |
Optics and optical instruments - Medical endoscopes and endoscopic accessories - General requirements |
BS ISO 8600-1-2005 |
光学和光子学.医用内窥镜和内疗器件.一般要求 |
|
BS ISO 8600-2-2002 |
光学和光学仪器.医疗内诊镜和内诊镜附件.对刚性支气管的特殊要求 |
Optics and optical instruments - Medical endoscopes and endoscopic accessories - Particular requirements for rigid bronchoscopes |
BS ISO 8600-4-1997 |
光学和光学仪器.医疗内诊镜和内诊镜附件.内段最大宽度的测定 |
Optics and optical instruments - Medical endoscopes and endoscopic accessories - Determination of maximum width of insertion portion |
BS ISO 8600-5-2005 |
光学和光子学.医用内窥镜和内疗器件.刚性光学内窥镜的光学分辨率测定 |
|
BS ISO 8600-6-2005 |
光学和光子学.医用内窥镜和内疗器件.词汇 |
|
BS ISO 8601-2005 |
数据和交换格式.信息交换.日期和时间表示法 |
|
BS ISO 8605-2001 |
玻璃纤维增强塑料.片状成型料.基础规范 |
Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for specification |
BS ISO 8611-1995 |
货物联运用普通平托盘.试验方法 |
General-purpose flat pallets for through transit of goods - Test methods |
BS ISO 8622-1998 |
电影技术.70mm电影发行拷贝上的磁性录音.A-通路重放特性 |
Cinematography - Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes - A-chain reproduction characteristics |
BS ISO 8640-1-1993 |
纺织机械和附件.平经针织机.词汇. 针织传动机构、支持和编织机件 |
Textile machinery and accessories - Flat warp knitting machines - Vocabulary - Driving mechanisms, supports and knitting elements |
BS ISO 8640-1-2004 |
纺织机械与附件.平型经编机.词汇.基础结构和成圈机件的词汇 |
|
BS ISO 8640-2-1993 |
纺织机械和附件.平经针织机.词汇.第2部分:送经、织物卷取和卷布 |
Textile machinery and accessories - Flat warp knitting machines - Vocabulary - Warp let-off, fabric take-up and batching |
BS ISO 8640-2-2004 |
纺织机械与附件.平型经编机.词汇.送经、织物卷取和卷布词汇 |
|
BS ISO 8640-3-2002 |
纺织机械和附件.平经针织机.词汇. 绘图装置词汇 |
Textile machinery and accessories - Flat warp knitting machines - Vocabulary - Vocabulary of patterning devices |
BS ISO 8660-2002 |
塑料.己内酰胺的高锰酸盐吸收指数的侧定.光谱分析法 |
Plastics - Determination of permanganate absorption number of caprolactam - Spectrometric method |
BS ISO 8670-3-2000 |
造口术收集袋.结肠造口术和回肠造口术收集袋的气味传递测定 |
Ostomy collection bags - Determination of odour transmission of colostomy and ileostomy bags |
BS ISO 8693-1999 |
制模工具.扁顶杆 |
Tools for moulding - Flat ejector pins |
BS ISO 8694-1998 |
铸模工具.带肩的脱模顶销 |
Tools for moulding - Shouldered ejector pins |
BS ISO 8697-2000 |
原油和石油产品.运输的可计算性.装船数量和留在船上的数量的评定 |
Crude petroleum and petroleum products - Transfer accountability - Assessment of on board quantity (OBQ) and quantity remaining on board (ROB) |
BS ISO 871-1997 |
塑料.热空气熔矿炉用的点燃温度的测定 |
Plastics - Determination of ignition temperature using a hot-air furnace |
BS ISO 8727-1997 |
机械振动和冲击.人体防护.生物动力协调体系 |
Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems |
BS ISO 8730-1990 |
银行业务.对电文鉴定(批量)的要求 |
Banking. Requirements for message authentication (wholesale) |
BS ISO 875-2001 |
香精油.与乙醇可混溶性的评定 |
Essential oils - Evaluation of miscibility in ethanol |
BS ISO 8764-1-1999 |
螺钉和螺母用安装工具.十字槽头螺钉用旋具.驱动点 |
Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Driver points |
BS ISO 8778-2003 |
气压传动.标准参考大气 |
(Pneumatic fluid power - Standard reference atmosphere) |
BS ISO 8784-1-2005 |
纸浆、纸和纸板.微生物检查.基于分解性新陈代谢的细菌、酵母菌和霉菌总数 |
|
BS ISO 8788-2000 |
航空航天.螺母.米制.形状和位置公差 |
Aerospace - Nuts, metric - Tolerances of form and position |
BS ISO 8789-1995 |
摩托车中输送液化石油气用橡胶软管和软管组件规范 |
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification |
BS ISO 8791-3-2005 |
纸和纸板.粗糙度/平滑度的测定(漏气法).谢菲尔德方法 |
|
BS ISO 8791-3-2005 |
纸和纸板.粗糙度/平滑度的测定(漏气法).谢菲尔德方法 |
|
BS ISO 8802-12-1999 |
信息技术.系统之间通讯和信息交换.局域网和都市网.特殊要求.需求优先存取法.物理层和中继站规格 |
Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Demand-priority access method, physical layer and repeater specifications |
BS ISO 8805-2001 |
信息处理系统.计算机制图.三维图形核心系统(GKS-3D)功能描述 |
Information processing systems - Computer graphics - Graphical kernel system for three dimensions (GKS-3D) functional description |
BS ISO 885-2000 |
一般用途螺栓和螺钉.米制系列.头部与杆的连接处的圆半径 |
General purpose bolts and screws - Metric series - Radii under the head |
BS ISO 8886-1999 |
信息技术.开放系统互连.数据链服务定义 |
Information technology - Open systems interconnection - Data link service definition |
BS ISO 8893-1998 |
林业机械.手提式刷锯.发动机的性能和燃料消耗 |
Forestry machinery - Portable brush cutters and grass trimmers - Engine performance and fuel consumption |
BS ISO 8899-2003 |
柠檬叶油 |
(Oil of lemon petitgrain [Citrus limon (L.) Burm. f.]) |
BS ISO 8957-1997 |
信息和文献工作.目录信息交换用希伯来字母代码字符集 |
Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange |
BS ISO 8968-3-2004 |
牛乳.氮含量的测定.批溶解法(半微观快速常规法) |
|
BS ISO 897-2001 |
摄影技术.胶卷,126,110和135号胶片.载像面的鉴别 |
(Photography - Roll films, 126, 110 and 135- size films - Identification of the image-bearing side) |
BS ISO 8976-2004 |
夹扭钳和剪切钳.水泵钳.尺寸和试验值 |
|
BS ISO 8976-2004 |
夹扭钳和剪切钳.水泵钳.尺寸和试验值 |
|
BS ISO 8977-2003 |
冲压工具.冲模 |
Tools for pressing - Matrixes |
BS ISO 8979-2004 |
电讯夹扭钳和剪切钳.术语 |
|
BS ISO 8995-2002 |
室内工作场所的照明 |
Lighting of indoor work places |
BS ISO 9000-2-1997 |
质量管理和质量保证标准.第2部分:ISO 9001,ISO 9002和ISO 9003应用总则 |
Quality management and quality assurance standards - Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
BS ISO 9001-2001 |
ISO 9001-2000理解指南光盘 |
ISO 9001:2000 Insight Guidance CD |
BS ISO 9019-1997 |
证券.证书标准号 |
Securities - Numbering of certificates |
BS ISO 9022-1-1995 |
光学和光学仪表.环境试验方法.试验定义.程度 |
Optics and optical instruments - Environmental test methods - Definitions, extent of testing |
BS ISO 9022-10-1998 |
光学和光学仪器.环境试验方法.组合的正弦振动和干热或干冷 |
Optics and optical instruments - Environmental test methods - Combined sinusoidal vibration and dry heat or cold |
BS ISO 9022-11-1995 |
光学和光学仪表.环境试验方法.模型宽度 |
Optics and optical instruments - Environmental test methods - Mould growth |
BS ISO 9022-12-1995 |
光学和光学仪表.环境试验方法.污染 |
Optics and optical instruments - Environmental test methods - Contamination |
BS ISO 9022-13-1998 |
光学和光学仪器.环境试验方法.组合的冲击、碰撞或自由落体与干热或干冷 |
Optics and optical instruments - Environmental test methods - Combined shock, bump or free fall and dry heat or cold |
BS ISO 9022-14-1995 |
光学和光学仪表.环境试验方法.露,白霜和冰 |
Optics and optical instruments - Environmental test methods - Dew, hoarfrost, ice |
BS ISO 9022-15-1998 |
光学和光学仪器.环境试验方法.组合的数控宽带随机振动和干热或干冷 |
Optics and optical instruments - Environmental test methods - Combined digitally controlled broad-band random vibration and dry heat or cold |
BS ISO 9022-16-1998 |
光学和光学仪器.环境试验方法.组合的跳动或稳态加速与干热或干冷 |
Optics and optical instruments - Environmental test methods - Combined bounce or steady-state acceleration and dry heat or cold |
BS ISO 9022-17-1995 |
光学和光学仪表.环境试验方法.污染和太阳辐射混合试验 |
Optics and optical instruments - Environmental test methods - Combined contamination, solar radiation |
BS ISO 9022-18-1995 |
光学和光学仪表.环境试验方法.混合湿热和低内压力试验 |
Optics and optical instruments - Environmental test methods - Combined damp heat and low internal pressure |
BS ISO 9022-19-1995 |
光学和光学仪器.环境试验方法.与正弦波振动或随机振动组合的温度循环 |
Optics and optical instruments - Environmental test methods - Temperature cycles combined with sinusoidal or random vibration |
BS ISO 9022-1995 |
光学和光学仪器.环境试验方法.与正弦波振动及无规振动组合的温度循环 |
Optics and optical instruments. Environmental test methods. Temperature cycles combined with sinusoidal or random vibration |
BS ISO 9022-2-2002 |
光学和光学仪器.环境试验方法.冷、热和潮气 |
Optics and optical instruments - Environmental test methods - Cold, heat and humidity |
BS ISO 9022-20-1997 |
光学和光学仪器.环境试验方法.第20部分:含有硫化氢或二氧化硫的湿空气 |
Optics and optical instruments - Environmental test methods - Humid atmosphere containing sulfur dioxide or hydrogen sulfide |
BS ISO 9022-21-1998 |
光学和光学仪器.环境试验方法.组合的低压、室温或干热 |
Optics and optical instruments - Environmental test methods - Combined low pressure and ambient temperature or dry heat |
BS ISO 9022-3-1998 |
光学和光学仪器.环境试验方法.机械应力 |
Optics and optical instruments - Environmental test methods - Mechanical stress |
BS ISO 9022-4-2002 |
光学和光学仪器.环境试验方法.盐雾 |
Optics and optical instruments - Environmental test methods - Salt mist |
BS ISO 9022-5-1995 |
光学和光学仪表.环境试验方法.冷和低气压试验 |
Optics and optical instruments - Environmental test methods - Combined cold, low air pressure |
BS ISO 9022-6-1995 |
光学和光学仪器.环境试验方法.尘埃 |
Optics and optical instruments - Environmental test methods - Dust |
BS ISO 9022-7-1995 |
光学和光学仪表.环境试验方法.滴水和下雨试验 |
Optics and optical instruments - Environmental test methods - Drip, rain |
BS ISO 9022-8-1995 |
光学和光学仪表.环境试验方法.高压,低压和浸入试验 |
Optics and optical instruments - Environmental test methods - High pressure, low pressure, immersion |
BS ISO 9022-9-1995 |
光学和光学仪表.环境试验方法.太阳辐射 |
Optics and optical instruments - Environmental test methods - Solar radiation |
BS ISO 9038-2002 |
液体的持续可燃性试验 |
Test for sustained combustibility of liquids |
BS ISO 9039-1995 |
光学及光学仪器.光学系统的质量评定.挠曲测定 |
Optics and optical instruments - Quality evaluation of optical systems - Determination of distortion |
BS ISO 9044-2000 |
工业用金属丝织物.技术要求和试验 |
Industrial woven wire cloth - Technical requirements and testing |
BS ISO 9056-1995 |
玻璃容器.防偷窃精加工系列.尺寸 |
Glass containers - Series of pilferproof finish - Dimensions |
BS ISO 9057-1995 |
玻璃容器.加压液体用28mm压痕瓶口.尺寸 |
Glass containers - 28 mm tamper-evident finish for pressurized liquids - Dimensions |
BS ISO 9058-1995 |
玻璃容器.公差 |
Glass containers - Tolerances |
BS ISO 9073-11-2002 |
纺织品.非织造品的试验方法.径流量 |
Textiles - Test methods for nonwovens - Run-off |
BS ISO 9073-12-2002 |
纺织品.非织造品的试验方法.定值吸收 |
Textiles - Test methods for nonwovens - Demand absorbency |
BS ISO 9073-6-2001 |
纺织品.非织造品的试验方法.吸收 |
Textiles - Test methods for nonwovens - Absorption |