标准号 |
中文名称 |
英文名称 |
| BS ISO 9083-2001 |
正齿轮和斜齿轮的负载能力的计算.船用齿轮的应用 |
Calculation of load capacity of spur and helical gears - Application to marine gears |
| BS ISO 9084-2003 |
正齿轮和斜齿轮承载能力计算.快速齿轮和类似要求齿轮的应用 |
Calculation of load capacity of spur and helical gears - Application to high speed gears and gears of similar requirements |
| BS ISO 9085-2002 |
正齿轮和斜齿轮的荷载能力计算.工业齿轮应用 |
Calculation of load capacity of spur and helical gears - Application for industrial gears |
| BS ISO 9096-2003 |
固定源排放.颗粒物质量浓度的人工测定 |
Stationary source emissions - Manual determination of mass concentration of particulate matter |
| BS ISO 9102-1998 |
柴油发动机.24,25,26和26.1型拧入式喷嘴座 |
Diesel engines - Screw-in injection nozzle holders types 24, 25, 26 and 26.1 |
| BS ISO 9116-2004 |
生咖啡.规范方法指南 |
|
| BS ISO 9123-2002 |
明渠水流测量.水位、落差和流量的关系 |
(Measurement of liquid flow in open channels - Stage-fall-discharge relationships) |
| BS ISO 9136-1-2005 |
磨料颗粒.体密度的测定.粗磨粒 |
|
| BS ISO 9136-2-2000 |
晶粒磨料.体密度的测定.粗晶粒磨料 |
Abrasive grains - Determination of bulk density - Microgrits |
| BS ISO 9144-1992 |
证券.光学字符识别线.位置和结构 |
Securities - Optical character recognition line - Position and structure |
| BS ISO 9186-2001 |
为便于理解和判断的公共信息符号的试验方法 |
(Graphical symbols - Test methods for judged comprehensibility and for comprehension) |
| BS ISO 9197-2000 |
纸、纸板和纸浆.水溶氯化物的测定 |
(Paper, board and pulps - Determination of water-soluble chlorides) |
| BS ISO 9198-2001 |
纸、纸板和纸浆.水溶性硫酸盐含量的测定 |
(Paper, board and pulp - Determination of water-soluble sulfates) |
| BS ISO 9207-1996 |
带内燃机的手持-便携式链锯.声压功率级的测定.工程法(2级) |
(Manually portable chain-saws with internal combustion engine - Determination of sound power levels - Engineering method (grade 2)) |
| BS ISO 9211-1-1995 |
光学和光学仪器.光学涂层.定义 |
(Optics and optical instruments - Optical coatings - Definitions) |
| BS ISO 9211-2-1995 |
光学和光学仪器.光学涂层.光学性质 |
(Optics and optical instruments - Optical coatings - Optical properties) |
| BS ISO 9211-3-1995 |
光学和光学仪表.光学涂层.环境耐久性 |
(Optics and optical instruments - Optical coatings - Environmental durability) |
| BS ISO 9211-4-1997 |
光学和光学仪器.光学涂层.第4部分:特定的试验方法 |
Optics and optical instruments - Optical coatings - Specific test methods |
| BS ISO 9213-2005 |
明渠中总流量的测量.使用全渠宽线圈的电磁法 |
|
| BS ISO 923-2000 |
煤净化设备.性能评定 |
(Coal cleaning equipment - Performance evaluation) |
| BS ISO 9230-1991 |
资料和文献.图书馆采购图书期刊的价格指数的确定 |
(Information and documentation - Determination of price indexes for books and serials purchased by libraries) |
| BS ISO 9232-2003 |
酸奶.特性微生物的识别 |
(Yogurt - Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)) |
| BS ISO 9236-1-2004 |
摄影.医用放射照相用屏蔽/胶片系统的感光测定.感光曲线形状、速度和平均梯度的测定 |
|
| BS ISO 9236-3-1999 |
摄影术语. 医疗放射照相术用屏蔽/胶片系统的感光测定.感光曲线形状、速度和乳腺X射线照相术平均梯度的测定 |
Photography - Sensitometry of screen/film systems for medical radiography - Determination of sensitometric curve shape, speed and average gradient for mammography |
| BS ISO 9261-2004 |
农业灌溉设备.发射器和喷射管.规范和试验方法 |
|
| BS ISO 9276-1-1998 |
粒度分析结果的表示.图形表示 |
Representation of results of particle size analysis - Graphical representation |
| BS ISO 9276-2-2001 |
粒度分析结果的表示.从粒度分布计算平均粒度/直径和力矩的计算 |
Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions |
| BS ISO 9276-4-2002 |
粒度分析结果的叙述.分类过程的特征描述 |
Representation of results of particle size analysis - Characterization of a classification process |
| BS ISO 9276-5-2005 |
粒度分析结果的表示.使用对数正态概率分布的粒度分析相关计算方法 |
|
| BS ISO 9282-1-1991 |
信息处理系统.图象的编码表示.第1部分:7位或8位环境下图象表示的编码原则 |
Information processing - Coded representation of pictures - Encoding principles for picture representation in a 7-bit or 8-bit environment |
| BS ISO 9285-1997 |
磨料颗粒和粗料.熔氧化铝的化学分析 |
Abrasive grains and crude - Chemical analysis of fused aluminium oxide |
| BS ISO 9286-1997 |
磨料颗粒和粗料.碳化硅的化学分析 |
Abrasive grains and crude - Chemical analysis of silicon carbide |
| BS ISO 9334-1996 |
光学和光学仪器.光学传递函数.定义和数学关系 |
Optics and optical instruments - Optical transfer function - Definitions and mathematical relationships |
| BS ISO 9335-1996 |
光学和光学仪器.光学传输功能.测量原理和程序 |
Optics and optical instruments - Optical transfer function - Principles and procedures of measurement |
| BS ISO 9336-1-1995 |
光学和光学仪表.应用.光转换功能.35mm静物摄影机可互换透镜 |
Optics and optical instruments - Application - Optical transfer function - Interchangeable lenses for 35 mm still cameras |
| BS ISO 9336-2-1995 |
光学和光学仪表.应用.光转换功能.办公复制机用透镜 |
Optics and optical instruments - Application - Optical transfer function - Lenses for office copiers |
| BS ISO 9336-3-1995 |
光学和光学仪表.应用.光转换功能.望远镜 |
Optics and optical instruments - Application - Optical transfer function - Telescopes |
| BS ISO 9337-1-1999 |
接触镜片.后屈光度的测定.利用手工聚焦法使用焦距仪的方法 |
Contact lenses. Determination of back vertex power. Method using focimeter with manual focusing |
| BS ISO 9343-2004 |
夹扭钳和剪切钳.鲤鱼钳.尺寸和试验值 |
|
| BS ISO 9343-2004 |
夹扭钳和剪切钳.鲤鱼钳.尺寸和试验值 |
|
| BS ISO 9345-2-2003 |
光学和光学仪器.显微镜.相对机械参考面的象距.无限大光学校正系统 |
(Optics and optical instruments - Microscopes - Imaging distances related to mechanical reference planes - Infinity-corrected optical systems) |
| BS ISO 9358-1995 |
光学和光学仪表.图像成形系统隐蔽眩光.定义和测量方法 |
Optics and optical instruments - Veiling glare of image forming systems - Definitions and methods of measurement |
| BS ISO 9362-1997 |
银行事务.银行事务远程通讯电报.银行鉴别码 |
Banking - Banking telecommunication messages - Bank identifier codes |
| BS ISO 9370-1997 |
塑料.风化试验中辐射曝光的仪器测定.一般导则和基本试验方法 |
(Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method) |
| BS ISO 9393-1-2004 |
工业用热塑性阀门.压力试验方法和要求.总则 |
|
| BS ISO 9398-1-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.家用织物熨烫机 |
Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Flatwork ironing machines |
| BS ISO 9398-2-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.间歇式转鼓烘燥机 |
Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Batch drying tumblers |
| BS ISO 9398-3-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.洗涤槽 |
Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Washing tunnels |
| BS ISO 9398-4-2003 |
工业洗衣机规范.容量和能耗特性定义和测试.带甩干的洗衣机 |
(Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Washer-extractors) |
| BS ISO 9403-2000 |
原油.运输责任.货物检验导则 |
(Crude petroleum - Transfer accountability - Guidelines for cargo inspection) |
| BS ISO 9455-17-2003 |
钎焊剂.试验方法.钎焊剂残留物的表面绝缘电阻梳试验和电化学迁移试验 |
(Soft soldering fluxes - Test methods - Surface insulation resistance comb test and electrochemical migration test of flux residues) |
| BS ISO 9462-1994 |
高山滑雪装备.安全要求和试验方法 |
(Alpine ski-bindings - Safety requirements and test methods) |
| BS ISO 9512-2003 |
卷烟.透气性的测定.定义和测量原理 |
(Cigarettes - Determination of ventilation - Definitions and measurement principles) |
| BS ISO 9518-1998 |
林业机械.便携式链锯.逆转试验 |
(Forestry machinery - Portable chain-saws - Kickback test) |
| BS ISO 9568-1996 |
电影技术.影院,审片室和配音室中的背景噪声级 |
(Cinematography - Background acoustic noise levels in the theatres, review rooms and dubbing rooms) |
| BS ISO 9587-1999 |
金属和其它无机覆层.减少氢脆风险的铁或钢的预处理 |
Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| BS ISO 9588-1999 |
金属和其他无机涂层.为减轻氢脆危险的铁和钢的后包覆处理 |
Metallic and other inorganic coatings - Post-coating treatments of iron and steel to reduce the risk of hydrogen embrittlement |
| BS ISO 96-1-1993 |
纺织机械和附件.环锭细纱机和环锭捻线机用的钢环和钢丝圈. 第1部分:T型钢领及其适用的钢丝圈 |
Textile machinery and accessories - Rings and travellers for ring spinning and ring doubling frames - T-rings and their appropriate travellers |
| BS ISO 96-2-1993 |
纺织机械和附件.环绽纺纱和环绽捻线的钢圈和钢丝圈.第2部分:HZCH型,HZ型和J型钢领圈及钢丝圈 |
Textile machinery and accessories - Rings and travellers for ring spinning and ring doubling frames - HZCH-, HZ- and J- rings and their appropriate travellers |
| BS ISO 9611-1996 |
声学.对来自连接结构的声辐射进行结构噪声的声源特性描述.弹性联接时机械装置在接触点的声速测量 |
Acoustics - Characterization of sources of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted |
| BS ISO 9622-2000 |
总牛奶.牛奶脂肪、蛋白质和乳糖含量的测定.中级红外设备操作指南 |
Whole milk - Determination of milkfat, protein and lactose content - Guidance on the operation of mid-infrared instruments |
| BS ISO 9631-2004 |
橡胶密封件.温度为110℃及以下的热水供给、排水和污水管道用密封环.材料规范 |
|
| BS ISO 9633-2001 |
自行车链.特性和试验方法 |
Cycle chains - Characteristics and test methods |
| BS ISO 965-1-1999 |
ISO普通米制螺纹.公差.第1部分:原则和基本数据 |
ISO general purpose metric screw threads - Tolerances - Principles and basic data |
| BS ISO 965-2-1999 |
ISO普通米制螺纹.公差.第2部分:普通外螺纹和内螺纹的尺寸极限.中等质量 |
ISO general purpose metric screw threads - Tolerances - Limits of sizes for general purpose external and internal screw threads - Medium quality |
| BS ISO 965-3-1999 |
ISO普通米制螺纹.公差.第3部分:结构螺纹的偏差 |
ISO general purpose metric screw threads - Tolerances - Deviations for constructional screw threads |
| BS ISO 965-4-1999 |
ISO普通米制螺纹.公差.第4部分:与由镀锌后公差位置为H或G攻出的内螺纹相匹配的热浸镀锌外螺纹的尺寸极限值 |
ISO general purpose metric screw threads - Tolerances - Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
| BS ISO 965-5-1999 |
ISO普通米制螺纹. 公差.第5部分:与镀锌前最大公差位置为H的热浸镀锌外螺纹相匹配的内螺纹的尺寸极限值 |
ISO general purpose metric screw threads - Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
| BS ISO 9650-1-2005 |
小型船舶.充气救生艇.I型 |
|
| BS ISO 9650-2-2005 |
小型船舶.充气救生艇.II型 |
|
| BS ISO 9650-3-2005 |
小型船舶.充气救生艇.材料 |
|
| BS ISO 9654-2004 |
电讯夹扭钳和剪切钳.专用钳.剪切钳 |
|
| BS ISO 9655-2004 |
电讯夹扭钳和剪切钳.专用钳.夹扭钳 |
|
| BS ISO 9656-2004 |
电讯夹扭钳和剪切钳.试验方法 |
|
| BS ISO 9657-2004 |
电讯夹扭钳和剪切钳 通用技术要求 |
|
| BS ISO 9667-1999 |
飞机地面供应设备.牵引杆 |
Aircraft ground support equipment - Tow bars |
| BS ISO 9669-1995 |
货运集装箱系列1.罐式集装箱的表面接合 |
Series 1 freight containers - Interface connections for tank containers |
| BS ISO 9711-1-1995 |
货运集装箱.与船载集装箱有关的资料.间档设计系统 |
Freight containers - Information related to containers on board vessels - Bay plan system |
| BS ISO 9711-2-1995 |
货运集装箱.与船载集装箱有关的资料.电报数据传输 |
Freight containers - Information related to containers on board vessels - Telex data transmission |
| BS ISO 9735-1-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.对所有部分共同的语法规则 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax rules common to all parts |
| BS ISO 9735-10-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.句法专业目录 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax service directories |
| BS ISO 9735-2-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据交换专用语法规则 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax rules specific to batch EDI |
| BS ISO 9735-3-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.交互式电子数据交换专用语法规则 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax rules specific to interactive EDI |
| BS ISO 9735-4-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据交换语法和服务报告电文 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax and service report message for batch EDI (message type - CONTRL) |
| BS ISO 9735-5-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据安全规范(源的真实性、完整性和对 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)) |
| BS ISO 9735-6-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据安全规范(安全真实性与确认电文AUTACK) |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Secure authentication and acknowledgement message (message type AUTACK) |
| BS ISO 9735-7-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).成批EDI的安全原则(机密) |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Security rules for batch EDI (confidentiality) |
| BS ISO 9735-8-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.与电子数据交换相关的电文 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Associated data in EDI |
| BS ISO 9735-9-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据安全规范.安全密钥与证书管理电文(电文类型KEYMAN) |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Security key and certificate management message (message type KEYMAN) |
| BS ISO 9736-2001 |
飞行器控制金属丝绳用耐腐蚀钢制螺纹有眼端.尺寸和荷载 |
Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope - Dimensions and loads |
| BS ISO 9737-2001 |
飞行操纵金属丝绳用耐腐蚀钢制锻接有眼端.尺寸及荷载 |
Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope - Dimensions and loads |
| BS ISO 9738-2001 |
飞行器控制金属丝绳用转筒.尺寸和荷载 |
Turnbarrels, for aircraft control wire rope - Dimensions and loads |
| BS ISO 974-2000 |
塑料.测定冲击的脆性温度 |
Plastics - Determination of the brittleness temperature by impact |
| BS ISO 9747-2001 |
飞行器控制金属丝绳用模压耐腐蚀钢制双柄球端.尺寸和荷载 |
Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| BS ISO 9748-2001 |
飞行器控制金属丝绳用模压耐腐蚀钢制球端.尺寸和荷载 |
Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| BS ISO 9749-2001 |
飞行器控制金属丝绳用模压耐腐蚀钢制螺柱端.尺寸和荷载 |
Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| BS ISO 9757-2001 |
飞行器控制金属丝绳转筒用耐腐蚀钢制螺纹叉端.尺寸和荷载 |
Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels - Dimensions and loads |
| BS ISO 9758-2001 |
飞行操纵金属丝绳用滚动轴承的耐腐蚀钢制加螺纹叉形杆端.尺寸及荷载 |
Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads |
| BS ISO 9759-2001 |
飞行操纵金属丝绳用耐腐蚀钢制锻接叉形杆端.尺寸及荷载 |
Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| BS ISO 9760-2001 |
航空航天.飞行操纵金属丝绳用滚动轴承的耐腐蚀钢制锻接叉形杆端.尺寸及荷载 |
Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads |
| BS ISO 9761-2001 |
飞行器控制金属丝绳松紧螺纹扣用耐腐蚀钢制锁紧卡箍.尺寸 |
Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles - Dimensions |
| BS ISO 9762-2001 |
飞行操纵金属丝绳组件.尺寸和端配件组合 |
Aircraft control wire rope assemblies - Dimensions and end-fitting combinations |
| BS ISO 9772-2001 |
泡沫塑料.需用小火焰的小试样的水平燃烧特性的测定 |
Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| BS ISO 98-2001 |
纺织机械和附件.纺前预处理机械和纺纱机械.上部卷轴的包纱性能 |
Textile machinery and accessories - Spinning preparatory and spinning machinery - Main dimensions of coverings for top rollers |
| BS ISO 9802-1997 |
原光学玻璃.词汇 |
Raw optical glass - Vocabulary |
| BS ISO 9815-2003 |
道路车辆.乘用车和挂车列车.横向稳定性试验 |
(Road vehicles - Passenger-car and trailer combinations - Lateral stability test) |
| BS ISO 9825-2005 |
水文测量.大河和洪水流量的野外测量 |
|
| BS ISO 9831-1998 |
饲料、动物产品和粪便或尿液.总热值测定.弹式热量计法 |
(Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method) |
| BS ISO 9838-1993 |
高山雪撬紧固.雪橇紧固试验用试验底板 |
(Alpine ski-bindings - Test soles for ski-binding tests) |
| BS ISO 9843-2002 |
柏木油.中国植物 |
(Oil of cedarwood, Chinese type (Cupressus funebris, Endlicher)) |
| BS ISO 9848-2004 |
摄影.源文件缩微胶片.ISO感光速度和ISO平均梯度的测定 |
|
| BS ISO 9849-2001 |
光学和光学仪器.大地测量和测绘仪器.词汇 |
Optics and optical instruments - Geodetic and surveying instruments - Vocabulary |
| BS ISO 9897-1998 |
货运集装箱.集装箱设备数据交换(CECEX).一般通信代码 |
Freight containers - Container equipment data exchange (CEDEX) - General communication codes |
| BS ISO 9898-2003 |
作物保护设备.丛生灌木和乔木用空气助动喷雾器试验方法 |
(Equipment for crop protection - Test methods for air-assisted sprayers for bush and tree crops) |
| BS ISO 9903-1-2003 |
纺织机械和附件.梳理机的金属针布用异型钢丝的主要尺寸.无互联锁或链接的底边 |
(Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Foot without interlocking or interchaining) |
| BS ISO 9903-1993 |
纺织机械和附件.梳理机金属针布用铁丝 |
Textile machinery and accessories - Wires for metallic card clothing |
| BS ISO 9903-2-2003 |
纺织机械和附件.梳理机的金属针布用异型钢丝的主要尺寸.有互链接的底边 |
(Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Foot with interchaining) |
| BS ISO 9912-1-2005 |
农业灌溉设备.微灌溉用过滤器.术语、定义和分类 |
|
| BS ISO 9920-1995 |
热环境的人类工效学.服装热绝缘和热蒸发评估 |
Ergonomics of the thermal environment - Estimation of the thermal insulation and evaporative resistance of a clothing ensemble |
| BS ISO 9921-1-1997 |
语言通信的人类工效学评定.第1部分:在接通话中(用谈话语言干扰级别法)有标准听话能力人的谈话语言干扰级别和通话距离的测定 |
Ergonomic assessment of speech communication - Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com