标准号 |
中文名称 |
英文名称 |
BS EN 196-21-1992 |
水泥的试验方法.第21部分:水泥中氯化物、二氧化碳和碱含量的测定 |
(Methods of testing cement - Determination of the chloride, carbon dioxide and alkali content of cement) |
BS EN 196-3-1995 |
测试水泥的方法.凝固时间和安定性的测定 |
(Methods of testing cement - Determination of setting time and soundness) |
BS EN 196-5-1995 |
测试水泥的方法.火山灰水泥的凝硬试验 |
(Methods of testing cement - Pozzolanicity test for pozzolanic cements) |
BS EN 196-6-1992 |
水泥的试验方法.细度的测定 |
(Methods of testing cement - Determination of fineness) |
BS EN 196-7-1992 |
水泥的试验方法.试样的取样和制备方法 |
(Methods of testing cement - Methods of taking and preparing samples of cement) |
BS EN 196-8-2004 |
测试水泥的方法.水合热.溶解法 |
|
BS EN 196-9-2004 |
测试水泥的方法.水合热.半绝热法 |
|
BS EN 196000-1993 |
电子器件质量评定协调体系.总规范.机电式开关 |
(Harmonized system of quality assessment for electronic components - Generic specification - Electromechanical switches) |
BS EN 196103-2000 |
空白详细规范:旋转式开关.评估等级Y |
(Blank detail specification: Rotary switches - Assessment level Y) |
BS EN 1963-1998 |
织物地板铺面.使用Lisson踏轮机的试验 |
(Textile floor coverings - Tests using the Lisson Tretrad machine) |
BS EN 1964-1-2000 |
便携气体钢瓶.水容量由0,5升到150升(包括150升)的可再充气的便携无缝钢制气体瓶的设计和结构规范.阀门压力 |
() |
BS EN 1964-2-2001 |
可移动储气罐.水容量为0.5升至150升的可充气可移动的无缝钢储气罐的设计和结构规范.RDOWNm值为大于等于1100 |
() |
BS EN 1964-3-2000 |
便携气体钢瓶.水容量由0,5升到150升(包括150升)的可再充气的便携无缝不锈钢制气体瓶的设计和结构规范.阀门 |
() |
BS EN 196403-2000 |
电子器件质量评定协调体系.空白详细规范.Y级评定 |
(Harmonized systems of quality assessment for electronic components - Blank detail specification: push button switches - Assessment level Y) |
BS EN 1965-1-2001 |
结构胶粘剂.腐蚀性.对铜衬底腐蚀性的测定和分类 |
(Structural adhesives - Corrosion - Determination and classification of corrosion to a copper substrate) |
BS EN 1965-2-2001 |
结构胶粘剂.腐蚀性.对黄铜衬底腐蚀性的测定和分类 |
(Structural adhesives - Corrosion - Determination and classification of corrosion to a brass substrate) |
BS EN 196500-1993 |
电子器件质量评定协调体系.分规范.包括空白详细规范EN 196501的薄膜开关 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Membrane switches including blank detail specification EN 196501) |
BS EN 1966-2002 |
建筑用粘接剂.用三点弯曲法测量粘接剂表面的表示特性 |
(Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method) |
BS EN 1967-2002 |
结构胶粘剂.用与导向托辊法有关的湿剥离试验评价铝表面处理技术的有效性 |
(Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method) |
BS EN 1968-2002 |
可运输储气瓶.无缝钢储气瓶的周期性检验和测试 |
(Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders) |
BS EN 1969-2000 |
运动场表面.合成运动场表面厚度的测定 |
(Surfaces for sports areas - Determination of thickness of synthetic sports surfaces) |
BS EN 197-1-2000 |
水泥.通用水泥组分、规范和合格标准 |
(Cement - Composition, specifications and conformity criteria for common cements) |
BS EN 197-2-2000 |
水泥.合格评定 |
(Cement - Conformity evaluation) |
BS EN 197-4-2004 |
水泥.早硬低强度高炉水泥的组分、规范和合格标准 |
|
BS EN 1970-2000 |
残疾人用可调整的床.要求和试验方法 |
(Adjustable beds for disabled persons - Requirements and test methods) |
BS EN 1971-1999 |
铜和铜合金.管的涡流试验 |
(Copper and copper alloys - Eddy current test for tubes) |
BS EN 1972-1997 |
潜水辅助设备.通气管.安全设备和试验方法 |
(Diving accessories - Snorkels - Safety requirements and test methods) |
BS EN 1974-1998 |
食品加工机械.切片机的安全和卫生要求 |
(Food processing machinery - Slicing machines - Safety and hygiene requirements) |
BS EN 1975-2000 |
便携气体钢瓶.容量由0,5升到150升(包括150升)的由无缝铝和铝合金制的气体瓶的设计和结构规范. |
(Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 ) |
BS EN 1976-1998 |
铜及铜合金.未最后定形的铜铸件产品 |
(Copper and copper alloys - Cast unwrought copper products) |
BS EN 1977-1998 |
铜及铜合金.铜拉制手柄(绕线杆材) |
(Copper and copper alloys - Copper drawing stock (wire rod)) |
BS EN 1978-1998 |
铜及铜合金.铜阴极 |
(Copper and copper alloys - Copper cathodes) |
BS EN 1979-1999 |
塑料管道和管道系统.热塑螺旋型结构壁的管道.接缝拉伸强度的测定 |
(Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam) |
BS EN 1981-2003 |
铜及铜合金.母合金 |
(Copper and copper alloys - Master alloys) |
BS EN 1982-1999 |
铜和铜合金.铸锭和铸件 |
(Copper and copper alloys - Ingots and castings) |
BS EN 1984-2000 |
工业阀门.钢插板阀门 |
(Industrial valves - Steel gate valves) |
BS EN 1985-1999 |
助步器.一般要求和试验方法 |
(Walking aids - General requirements and test methods) |
BS EN 1986-1-1997 |
电动道路车辆.能量特性测定.纯电动车 |
(Electrically propelled road vehicles - Measurement of energy performances - Pure electric vehicles) |
BS EN 1986-2-2001 |
电动道路车辆.能量特性测定.热电复式动力车 |
(Electrically propelled road vehicles - Measurement of energy performances - Thermal electric hybrid vehicles) |
BS EN 1987-1-1997 |
电车.安全的特殊要求.能量储存板 |
(Electrically propelled road vehicles - Specific requirements for safety - On board energy storage) |
BS EN 1987-2-1997 |
电车.安全的特殊要求.功能安全措施和失效防护 |
(Electrically propelled road vehicles - Specific requirements for safety - Functional safety means and protection against failures) |
BS EN 1987-3-1998 |
电车.安全的特殊要求.防止乘客被电伤害的保护措施 |
(Electrically propelled road vehicles - Specific requirements for safety - Protection of users against electrical hazards) |
BS EN 1988-1-1998 |
食品.亚硫酸盐的测定.最佳Monier-Williams法 |
(Foodstuffs - Determination of sulfite - Optimized Monier-Williams method) |
BS EN 1988-2-1998 |
食品.亚硫酸盐的测定.酶催法 |
(Foodstuffs - Determination of sulfite - Enzymatic method) |
BS EN 1989-2000 |
热塑管道系统.地埋无压力排水设施用连接件.通过估计密封压力对带热塑弹力计密封连接件长期密封性能的试验方 |
(Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating th) |
BS EN 1990-2002 |
欧洲法规.建筑设计基础 |
(Eurocode - Basis of structural design) |
BS EN 1991-1-1-2002 |
欧洲法规 1.机构作用.一般作用.建筑物的密度、自重和强制负荷 |
(Eurocode 1. Actions on structures - General actions - Densities, self-weight, imposed loads for buildings) |
BS EN 1991-1-2-2002 |
欧洲法规 1.对建筑物的作用.一般作用.对建筑物防火的作用 |
(Eurocode 1. Actions on structures - General actions - Actions on structures exposed to fire) |
BS EN 1991-1-3-2003 |
欧洲法规1:对结构的作用.一般作用.雪荷载 |
(Eurocode 1. Actions on structures - General actions - Snow loads) |
BS EN 1991-1-5-2004 |
欧洲法规 1.对建筑物的作用.一般作用.热作用 |
|
BS EN 1991-1-5-2004 |
欧洲法规 1.对建筑物的作用.一般作用.热作用 |
|
BS EN 1991-2-2003 |
欧洲法规 1.对建筑物的作用.桥上的交通荷载 |
(Eurocode 1. Actions on structures - Traffic loads on bridges) |
BS EN 1992-1-1-2004 |
欧洲法规2.混凝土结构设计.一般规则和建筑规则 |
|
BS EN 1992-1-2-2005 |
欧洲法规2.混凝土结构设计.一般规则.结构防火设计 |
|
BS EN 1994-1-1-2005 |
欧洲法规4.复合钢和混凝土结构的设计.建筑物用通用规则和规则 |
|
BS EN 1995-1-1-2004 |
欧洲法规5.木结构的设计.总则.通用规则和建筑规则 |
|
BS EN 1997-1-2004 |
欧洲法规7.土木技术设计.总则 |
|
BS EN 1998-1-2005 |
欧洲法规8.抗震结构设计.建筑物用一般规则、地震作用和规则 |
|
BS EN 2-1992 |
火灾的分类 |
(Classification of fires) |
BS EN 20-1-1992 |
木材防腐剂.对竹粉蠹虫(lycuts)预防作用的测定.利用表面处理法(实验室法) |
(Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Application by surface treatment (laboratory method)) |
BS EN 20-2-1993 |
木材防腐剂.对竹粉蠹防护效果的测定.利用浸渍法(实验室法) |
(Wood preservatives - Determination of the protective effectiveness against Lyctus brunneus (Stephens) - Application by impregnation (laboratory method)) |
BS EN 200-1992 |
卫生用水龙头.PN10型单一和混合水龙头(公称尺寸1/2)通用技术规范.最小流动压力0.05MPa(0.5bar) |
(Sanitary tapware - General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10 - Minimum flow pressure of 0.05 MPa (0.5 bar)) |
BS EN 2000-1992 |
质量保证.EN航空航天产品.制造厂质量体系的鉴定 |
(Quality assurance - EN aerospace products - Approval of the quality system of manufacturers) |
BS EN 2004-1-1993 |
铝和铝合金产品试验方法.第1部分:锻铝合金电导率的测定 |
(Test methods for aluminium and aluminium alloy products - Determination of electrical conductivity of wrought aluminium alloys) |
BS EN 2004-1-1993 |
铝和铝合金产品试验方法.第1部分:锻铝合金电导率的测定 |
|
BS EN 2004-5-1993 |
铝和铝合金产品试验方法.第5部分:包层半成品的包层厚度和铜扩散的测定 |
(Test methods for aluminium and aluminium alloy products - Determination of cladding thickness and copper diffusion of clad semi-finished products) |
BS EN 2004-5-1993 |
铝和铝合金产品试验方法.第5部分:包层半成品的包层厚度和铜扩散的测定 |
|
BS EN 2009-1992 |
轴承.飞机机架的滚压.直径为8和9系列的刚性、单排钢球轴承、尺寸和载荷 |
(Bearings - Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9. Dimensions and loads) |
BS EN 201-1997 |
橡胶和塑料机械.注模机械.安全要求 |
(Rubber and plastics machines - Injection moulding machines - Safety requirements) |
BS EN 20105-A02-1995 |
纺织品.色牢度试验.第A02部分:彩色变化评定灰度等级 |
(Textiles - Tests for colour fastness - Grey scale for assessing change in colour) |
BS EN 20105-A03-1995 |
纺织品.色牢度试验.第A03部分:沾污评定灰度等级 |
(Textiles - Tests for colour fastness - Grey scale for assessing staining) |
BS EN 20105-C01-1993 |
纺织品.色牢度试验.耐洗涤色牢度:试验1 |
(Textiles - Tests for colour fastness - Colour fastness to washing: Test 1) |
BS EN 20105-C03-1993 |
纺织品.色牢度试验.耐洗涤色牢度:试验3 |
(Textiles - Tests for colour fastness - Colour fastness to washing: Test 3) |
BS EN 20105-C04-1993 |
纺织品.色牢度试验.第C04部分:耐洗涤色牢度:试验4 |
(Textiles - Tests for colour fastness - Colour fastness to washing: Test 4) |
BS EN 20105-C05-1993 |
纺织品.色牢度试验.第C05部分:耐洗涤色牢度:试验5 |
(Textiles - Tests for colour fastness - Colour fastness to washing: Test 5) |
BS EN 20105-N01-1995 |
纺织品的色牢度试验.第N01部分:耐褪色的色牢度.次氯酸盐试验方法 |
(Textiles - Tests for colour fastness - Colour fastness to bleaching: hypochlorite) |
BS EN 2011-1989 |
直径为8和9系列防腐钢单列滚珠轴承管架滚动刚性规范.尺寸和负载 |
(Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9. Dimensions and loads) |
BS EN 2012-1989 |
直径为0和2系列钢单列滚珠轴承管架滚动刚性规范.尺寸和负载 |
(Specification for bearings - airframe rolling rigid, single row ball bearings in steel diameter series 0 and 2. Dimensions and loads) |
BS EN 20139-1992 |
纺织品.调节和检验用的标准大气 |
(Textiles - Standard atmospheres for conditioning and testing) |
BS EN 2014-1989 |
轴承规范.直径为0和2系列的防腐钢制飞机用轧制刚性单列滚珠轴承.尺寸和荷载 |
(Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2. Dimensions and loads) |
BS EN 20140-10-1992 |
声学.建筑物和构件隔音的测量.第10部分:小型建筑构件隔音的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurement of airborne sound insulation of small building elements) |
BS EN 20140-2-1993 |
声学.建筑物和建筑构件的隔音测量.第2部分:精确数据的确定.验证和应用 |
(Determination, verification and application of precision data) |
BS EN 20140-9-1987 |
声学.建筑物和建筑构件的隔音测量.悬吊式天花板上有压力通风的室对室气载音响隔离的实验室测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements - Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it) |
BS EN 2015-1989 |
直径为2系列的双列自调整钢滚珠轴承管架滚动刚性规范.尺寸和负载 |
(Specification for bearings - airframe rolling double row, self aligning ball bearings in steel diameter series 2. Dimensions and loads) |
BS EN 2017-1989 |
轴承规范.直径为2系列的防腐钢制飞机用轧制双列自调整滚珠轴承.尺寸和荷载 |
(Specification for bearings - airframe rolling double row self aligning ball bearings in corrosion resisting steel diameter series 2. Dimensions and loads) |
BS EN 2018-1989 |
直径为3和4系列单列自调整钢滚珠轴承管架滚动刚性规范.尺寸和负载 |
(Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensions and loads) |
BS EN 20187-1993 |
纸、纸板和纸浆.样品调理 |
(Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples) |
BS EN 2020-1989 |
直径为3和4系列单列自调整防腐钢滚珠轴承管架滚动刚性规范.尺寸和负载 |
(Specification for bearings - airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter series 3 and 4. Dimensions and loads) |
BS EN 2022-1990 |
具有自润滑轴瓦的防腐钢球面轴承规范.轻型系列.尺寸和负载 |
(Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads) |
BS EN 20225-1992 |
紧固件.螺栓、螺柱和螺母.图形符号和尺寸 |
(Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions) |
BS EN 2023-1989 |
具有自润滑轴瓦的防腐钢球面轴承规范.标准系列.尺寸和负载 |
(Specification for bearings - spherical plain in corrosion resisting steel with self-lubricating liner - Normal series - Dimensions and loads) |
BS EN 20273-1992 |
紧固件.螺栓和螺钉自由尺寸孔 |
(Fasteners - Clearance holes for bolts and screws) |
BS EN 20286-1-1990 |
ISO极限和配合体系.公差,偏差和配合的基础 |
(ISO system of limits and fits - ISO system of limits and fits - Bases of tolerances, deviations and fits) |
BS EN 20286-2-1990 |
ISO极限和配合体系.孔和轴标准公差等级和极限偏差表 |
(ISO system of limits and fits - ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts) |
BS EN 20287-1986 |
纸和纸板.水份含量的测定.烘干法 |
(Paper and board - Determination of moisture content - Oven-drying method) |
BS EN 203-1-1993 |
煤气加热供膳设备规范.安全要求 |
(Specification for gas heated catering equipment - Safety requirements) |
BS EN 203-1-2005 |
煤气加热供膳设备.一般安全规则 |
|
BS EN 203-2-1995 |
煤气加热供膳设备规范.能源的合理使用 |
(Specification for gas heated catering equipment - Rational use of energy) |
BS EN 2032-1-2002 |
金属材料.常规命名 |
(Metallic materials - Conventional designation) |
BS EN 2032-2-1994 |
金属材料.运输条件下金属材料状况标记 |
(Metallic materials - Coding of metallurgical condition in delivery condition) |
BS EN 20340-1993 |
输送带的阻燃规范和试验方法 |
(Conveyor belts - Flame retardation - Specifications and test method) |
BS EN 204-2001 |
非结构热塑性木材胶粘剂分类 |
(Classification of thermoplastic wood adhesives for non-structural applications) |
BS EN 2044-2001 |
航空航天系列.铝及铝合金拉制圆棒.公差等级h11.直径4mm |
(Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm) |
BS EN 2045-2001 |
航空航天系列.铝及铝合金拉制方棒.公差等级h11.厚度6mm |
(Aerospace series - Square bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm) |
BS EN 2046-2001 |
铝及铝合金拉制六角形棒材.公差等级h11.对边宽度7mm |
(Hexagonal bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm) |
BS EN 2047-2001 |
航空航天系列.带边L型铝及铝合金挤压件.尺寸 |
(Aerospace series - Beaded L-section extruded, in aluminium and aluminium alloys - Dimensions) |
BS EN 2048-2001 |
航空航天系列.铝合金中的挤压L型材.尺寸 |
(Aerospace series - Extruded L-section in aluminium alloys - Dimensions) |
BS EN 2049-2001 |
航空航天系列.U型铝及铝合金挤压件.尺寸 |
(Aerospace series - Extruded channel section, in aluminium alloys - Dimensions) |
BS EN 205-2003 |
胶粘剂.非结构用木材粘结剂试验方法.搭接接头拉伸剪切强度的测量 |
(Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints) |
BS EN 2050-2001 |
航空航天系列.T型铝及铝合金挤压件.尺寸 |
(Aerospace series - Extruded T-section, in aluminium alloys - Dimensions) |
BS EN 20534-1989 |
纸和纸板表观页密度或表观块密度及厚度的测定方法 |
(Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board) |
BS EN 20535-1991 |
纸和纸板.水吸收性测定.Cobb法 |
(Paper and board - Determination of water absorptiveness - Cobb method) |
BS EN 20594-1-1987 |
注射器、针头和某些其它医用设备的有6%锥度的锥形配件.一般要求 |
(Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - General requirements) |
BS EN 206-1-2001 |
混凝土.规范、性能、产品及合格 |
(Concrete - Specification, performance, production and conformity) |
BS EN 2063-1992 |
飞行器骨架滚动轴承.技术规范 |
(Airframe rolling bearings - Technical specification) |
BS EN 20638-1980 |
纸浆中干物质含量测定的方法 |
(Method for determination of dry-matter content of pulps) |
BS EN 2064-1992 |
具有自润滑轴套的球面防腐钢轴承.技术规范 |
(Bearings, spherical plain in corrosion resisting steel with self lubricating liner - Technical specification) |
BS EN 2066-2002 |
航空航天系列.铝合金挤制型材.一般公差 |
(Aerospace series - Extruded section in aluminium alloys - General tolerances) |
BS EN 2067-1996 |
用于杆端的自测轴承承重.技术规范 |
(Rod ends with self-aligning ball bearings - Technical specification) |
BS EN 2068-1996 |
用于杆端的自润滑自测承重.技术规范 |
(Rod ends with self-lubricating self-aligning bearings - Technical specification) |