标准号 |
中文名称 |
英文名称 |
BS 5306-5.2-1984 |
住房用灭火装置及设备.第5部分:哈朗(聚四氟乙烯)灭火系统.第2节:哈朗(聚四氟乙烯)211全溢流装置 |
(Code of practice for fire extinguishing installations and equipment on premises - Halon systems - Halon 1211 total flooding systems) |
BS 5306-6.1-1988 |
住房用灭火装置及设备.第6部分:泡沫灭火系统.第1节:低发泡泡沫灭火系统规范 |
(Fire extinguishing installations and equipment on premises - Foam systems - Specification for low expansion foam systems) |
BS 5306-6.2-1989 |
住房用灭火装置及设备.第6部分:泡沫灭火系统.第2节:中、高发泡泡沫灭火系统规范 |
(Fire extinguishing installations and equipment on premises - Foam systems - Specification for medium and high expansion foam systems) |
BS 5306-8-2000 |
住房用灭火装置及设备.便携式灭火机的选择和安装实施规程 |
(Fire extinguishing installations and equipment on premises - Selection and installation of portable fire extinguishers - Code of practice) |
BS 5307-1976 |
普通球锁冲床规范 |
(Specification - Basic ball-lock punches) |
BS 5308-1-1986 |
仪器用电缆.第1部分:聚乙烯绝缘电缆规范 |
(Instrumentation cables - Specification for polyethylene insulated cables) |
BS 5308-2-1986 |
仪器用电缆.第2部分:聚氯乙烯绝缘电缆规范 |
(Instrumentation cables - Specification for PVC insulated cables) |
BS 5309-1-1976 |
化学制品的取样方法.第1部分:序言和一般原则 |
(Methods for sampling chemical products - Introduction and general principles) |
BS 5309-2-1976 |
化学制品的取样方法.第2部分:燃气取样 |
(Methods for sampling chemical products - Sampling of gases) |
BS 5309-3-1976 |
化学制品的取样方法.第3部分:液体取样 |
(Methods for sampling chemical products - Sampling of liquids) |
BS 5309-4-1976 |
化学制品的取样方法.第4部分:固体取样 |
(Methods for sampling chemical products - Sampling of solids) |
BS 5315-1991 |
一般用软管夹(蜗杆驱动)规范(米制系列) |
(Specification for hose clamps (worm drive type) for general purpose use (metric series)) |
BS 5317-1976 |
米制长度量棒及其附件规范 |
(Specification - Metric length bars and their accessories) |
BS 5325-2001 |
铺地织物的铺设.实施规程 |
(Installation of textile floor coverings - Code of practice) |
BS 5326-1976 |
内孔拉刀和控制夹头定位装置规范 |
(Specification - Internal broaching tools and pull chuck locations) |
BS 5327-1976 |
流体动力装置用后直角弯头规范 |
(Specification - Swept elbow bends for fluid power applications) |
BS 5328 Pt.2-1997 |
混凝土.第2部分:混凝土扳合料的确定方法 |
(Concrete. Methods for specifying concrete mixes) |
BS 5328 Pt.3-1990 |
混凝土.第3部分:混凝土生产和运输中所用方法的规格 |
(Concrete. Specification for the procedures to be used in producing and transporting concrete) |
BS 5328 Pt.4-1990 |
混凝土.第4部分:混凝土取样、试验和合格评定所用方法的规格 |
(Concrete. Specification for the procedures to be used in sampling, testing and assessing compliance of concrete) |
BS 5330-1976 |
估计噪声造成的听觉障碍可能性的试验方法 |
(Method of test for estimating the risk of hearing handicap due to noise exposure) |
BS 5332-1982 |
用于串行记录的产生和交换的数据单规范 |
(Specification for data elements for the generation and exchange of serials records) |
BS 5335-1-1991 |
欧洲大陆被子.第1部分:被子填充物(除羽毛和/或羽绒外)规范 |
(Continental quilts - Specification for quilts containing fillings other than feather and/or down) |
BS 5335-2-1991 |
欧洲大陆被子.第2部分:被子填充物(羽毛和/或羽绒毛)规范 |
(Continental quilts - Specification for quilts filled with feather and/or down) |
BS 5336-1976 |
高磁通密度变压器用铁氧体铁芯规范 |
(Specification - Cores made of ferromagnetic oxides for use in high flux density transformers) |
BS 5338-1976 |
工程用锌合金压模铸件规程 |
(Code of practice for zinc alloy pressure die casting for engineering) |
BS 5339-1976 |
液态化学制品颜色按黑曾(Hazen)单位(铂-钴度标)的测量方法 |
(Method of measurement of colour in Hazen units (platinum-cobalt scale) of liquid chemical products) |
BS 5341-5-1976 |
往复式内燃机用小于和等于200mm直径的活塞环.第5部分:环槽 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Ring grooves) |
BS 5341-6.1-1992 |
往复式内燃机用直径小于和等于200mm的活塞环.第6部分:词汇.检验方法和总规范.第1节;词汇 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Vocabulary, inspection methods and generic specifications - Vocabulary) |
BS 5341-6.5-1992 |
往复式内燃机用直径小于和等于200mm的活塞环.第6部分:词汇.检验方法和总规范.第5节:质量要求 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Vocabularly, inspection methods and generic specifications - Quality requirements) |
BS 5341-7.2-1992 |
往复式内燃机用直径小于和等于200mm的活塞环.单片环的设计、尺寸和名称.刮油环规范 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Specification for scraper rings) |
BS 5341-7.3.1-1992 |
往复式内燃机用直径小于和等于200mm的活塞环.单片环的设计、尺寸和名称.楔表面和半楔表面压缩环.楔表面环的 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Keystone and half keystone compression rings - Specific) |
BS 5341-7.4-1992 |
往复式内燃机用直径小于和等于200mm的活塞环.单片环的设计、尺寸和名称.油控制环的规范 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Specification for oil control rings) |
BS 5341-8.1-1992 |
往复式 内燃机用直径小于和等于200mm的活塞环.第8部分:多片组合式控油环的设计、尺寸和命名.第1节:盘簧加压 |
(Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for multi-piece oil control rings - Specification for coil-spring-loaded oil con) |
BS 5342-1985 |
高压饱和蒸汽用橡胶管规范 |
(Specification for rubber hoses for high-pressure saturated steam) |
BS 5343-2-1991 |
气体检测管.第2部分:远距气体检测管规范 |
(Gas detector tubes - Specification for long term gas detector tubes) |
BS 5344-1985 |
旋转和冲击气动工具的性能试验方法 |
(Methods for performance tests for rotary and percussive pneumatic tools) |
BS 5346-1976 |
ISO 米制梯形螺纹规范 |
(Specification - ISO metric trapezoidal screw threads) |
BS 5347-1976 |
电信和电子设备中的变压器和感应线圈用的硅铁带绕铁芯规范 |
(Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment) |
BS 5348-2-1989 |
肉类和肉类制品的取样方法.第2部分:检测微生物用的试验样品的制备 |
(Methods for sampling meat and meat products - Preparation of test samples for microbiological examination) |
BS 5350-0-1987 |
粘合剂的试验方法.一般说明 |
(Methods of test for adhesives - General introduction) |
BS 5350-A1-1976 |
粘合剂的试验方法.粘附体.粘附体的制备 |
(Methods of test for adhesives - Adherends - Adherend preparation) |
BS 5350-A2-1990 |
粘合剂的试验方法.粘附体.被粘材料的选择导则 |
(Methods of test for adhesives - Adherends - Guide to the selection of adherend materials) |
BS 5350-B1-1978 |
粘合剂的试验方法.密度的测定 |
(Methods of test for adhesives - Determination of density) |
BS 5350-B2-1976 |
粘合剂的试验方法.粘合剂.固体物含量的测定 |
(Methods of test for adhesives - Adhesives - Determination of solids content) |
BS 5350-B5-1976 |
粘合剂的试验方法.胶凝时间的测定 |
(Methods of test for adhesives - Determination of gelation time) |
BS 5350-B8-1991 |
粘合剂的试验方法.粘合剂.粘度的测定 |
(Methods of test for adhesives - Adhesives - Determination of viscosity) |
BS 5350-B9-1984 |
粘合剂的试验方法.粘合剂.抗下垂测定(施加后流下) |
(Methods of test for adhesives - Adhesives - Determination of resistance to sagging (flow after application)) |
BS 5350-C1-1986 |
粘合剂的试验方法.粘结部位的机械试验.粘结部位抗劈裂强度的测定 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of cleavage strength of adhesive bonds) |
BS 5350-C13-1990 |
粘合剂的试验方法.粘结部位的机械试验.爬升式滚筒剥离试验 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Climbing drum peel test) |
BS 5350-C14-1979 |
粘合剂的试验方法.粘结部位:机械试验.刚性对刚性组件的90度剥离试验 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - 90 ?peel test for a rigid-to-rigid assembly) |
BS 5350-C15-1990 |
粘合剂的试验方法.粘结部位的机械试验.在压缩剪切下粘接强度的测定 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in compressive shear) |
BS 5350-C5-2002 |
粘合剂的试验方法.硬质被粘物抗纵向剪切粘结强度的测定 |
(Methods of test for adhesives - Determination of bond strength in longitudinal shear for rigid adherends) |
BS 5350-C6-1990 |
粘合剂的试验方法.粘结部位的机械试验.胶合板在直接拉伸下胶结强度的测定 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in direct tension in sandwich panels) |
BS 5350-C7-1990 |
粘合剂的试验方法.粘结部位的机械试验.蠕变和耐持续施加力的测定 |
(Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of creep and resistance to sustained application of force) |
BS 5350-D4-1976 |
粘合剂的试验方法.粘接连接部位:着色可能性的测定 |
(Methods of test for adhesives - Adhesively bonded joints: environmental tests - Determination of staining potential) |
BS 5350-E1-1976 |
粘合剂的试验方法.试验数据的取样和分析.统计分析指南 |
(Methods of test for adhesives - Sampling and analysis of test data - Guide to statistical analysis) |
BS 5350-E2-1979 |
粘合剂的试验方法.试验数据的取样和分析.取样指南 |
(Methods of test for adhesives - Sampling and analysis of test data - Guide to sampling) |
BS 5350-G2-1987 |
粘合剂的试验方法.厌氧粘合剂的试验.厌氧粘合剂的静抗剪强度的测定 |
(Methods of test for adhesives - Tests on anaerobic adhesives - Determination of static shear strength of anaerobic adhesives) |
BS 5350-G3-1987 |
粘合剂的试验方法.放在金属表面上的厌氧粘合剂性能的测定 |
(Methods of test for adhesives - Determination of ability of anaerobic adhesives to set on metal surfaces) |
BS 5350-H1-1981 |
粘合剂的试验方法.第H1部分:应用设备中热熔粘合剂热稳定性的测定 |
(Methods of test for adhesives - Determination of heat stability of hot melt adhesives in the application equipment) |
BS 5350-H2-1982 |
粘合剂的试验方法.热熔粘合剂物理试验.低温挠性及冷爆裂温度的测定 |
(Methods of test for adhesives - Physical tests on hot-melt adhesives - Determination of low temperature flexibility or cold crack temperature) |
BS 5350-H3-1984 |
粘合剂的试验方法.热熔粘合剂物理试验.热熔粘合剂耐热性的测定 |
(Methods of test for adhesives - Physical tests on hot-melt adhesives - Determination of heat resistance of hot-melt adhesives) |
BS 5350-H4-1984 |
粘合剂的试验方法.热熔粘合剂的物理试验.热熔粘合剂的最大断开时间测定(热炉法) |
(Methods of test for adhesives - Physical tests on hot-melt adhesives - Determination of maximum open time of hot-melt adhesives (oven method)) |
BS 5351-1986 |
石油、石油化工及类似工业用钢球阀规范 |
(Specification for steel ball valves for the petroleum, petrochemical and allied industries) |
BS 5353-1989 |
钢塞阀规范 |
(Specification for steel plug valves) |
BS 5355-1976 |
可液化气体和不可液化气体的填充率和扩张压力规范 |
(Specification for filling ratios and developed pressures for liquefiable and permanent gases) |
BS 5357-1995 |
安全窗用玻璃的安装实用规程 |
(Code of practice for installation of security glazing) |
BS 5367-1976 |
砂布、砂纸和砂带的尺寸 |
(Dimensions of coated abrasives) |
BS 5368-1-1976 |
窗的试验方法.第1部分:透气性试验 |
(Methods of testing windows - Air permeability test) |
BS 5368-4-1978 |
窗的试验方法.第4部分:试验报告的格式 |
(Methods of testing windows - Form of test report) |
BS 5372-1997 |
额定电压为600/1000V和1900/3700V的铜或铝导体多芯挤制固体介电绝缘电缆终端的尺寸规范 |
(Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conduc) |
BS 5377-1-1988 |
用棉制对比布评定洗涤效果.第1部分:棉制对比布的制备及使用规范 |
(Assessment of laundering effects by means of a cotton control cloth - Specification for preparation and use of the cotton control cloth) |
BS 5377-2-1990 |
用棉制对比布评定洗涤效果.第2部分:洁净棉制对比布试验与分析方法 |
(Assessment of laundering effects by means of a cotton control cloth - Methods of analysis and test for the unsoiled cotton control cloth) |
BS 5378-2-1980 |
安全信号及颜色.第2部分:材料的比色及光度特性规范 |
(Safety signs and colours - Specification for colorimetric and photometric properties of materials) |
BS 5380-1984 |
用O 型圈密封及G 系列紧固螺纹的液压系流入口及连接螺栓规范 |
(Specification for hydraulic port and stud coupling using ’O’-ring sealing and ’G’ series fastening threads) |
BS 5381-2-1998 |
烟草和烟草制品物理特性的测定方法.用激光束测量仪器对卷烟和过滤棒标准直径的测定 |
(Methods for determination of physical properties of tobacco and tobacco products - Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus) |
BS 5381-4-1998 |
烟草和烟草制品物理特性的测定方法.用于卷烟纸、过滤嘴、过滤连接纸的材料空气渗透性的测定 |
(Methods for determination of physical properties of tobacco and tobacco products - Determination of air permeability of materials used as cigarette papers, filter plug wrap and filter joining paper) |
BS 5381-5-1999 |
烟草和烟草制品物理性能的测定方法.香烟的抗拉性和过滤嘴的压降性能 |
(Methods for determination of physical properties of tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter rods) |
BS 5381-7-1997 |
烟草和烟草制品物理性能的测定方法.用旋转笼测定过滤嘴端烟草损失 |
(Methods for determination of physical properties of tobacco and tobacco products - Loss of tobacco from cigarette ends using a rotating cylindrical cage) |
BS 5381-8-1997 |
烟草和烟草制品物理性能的测定方法.用旋转立方盒测定卷烟末端烟草损失 |
(Methods for determination of physical properties of tobacco and tobacco products - Loss of tobacco from cigarette ends using a rotating cubic box (sismelatophore)) |
BS 5383-1986 |
钢镍合金及钛合金制金属管及管道系统零件的材料标志与颜色编码规范 |
(Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes) |
BS 5385-1-1995 |
墙和地贴瓷砖.第1部分:在普通情况下室内用墙贴瓷砖及锦砖的设计与铺砌实用规程 |
(Wall and floor tiling - Code of practice for the design and installation of internal ceramic and natural stone wall tiling and mosaics in normal conditions) |
BS 5385-2-1992 |
墙和铺地面砖.第2部分:外墙用陶瓷砖及锦砖的设计和安装的实用规程(包括琉璃砖和彩瓷砖) |
(Wall and floor tiling - Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience tiles)) |
BS 5385-3-1989 |
贴墙和贴地瓷砖.第3部分:陶瓷地面砖和锦砖 |
(Wall and floor tiling - Code of practice for the design and installation of ceramic floor tiles and mosaics) |
BS 5385-4-1992 |
墙和铺地面砖.第4部分:特殊条件下贴瓷砖和马赛克实用规程 |
(Wall and floor tiling - Code of practice for tiling and mosaics in specific conditions) |
BS 5385-5-1994 |
墙和地面贴砖.第5部分:水磨石贴砖和石板、天然石和混合方块铺地面的设计和安装实用规程 |
(Wall and floor tiling - Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings) |
BS 5386-6-1991 |
燃气设备规范.带强制对流式灶的家用烹饪炊具的规范 |
(Specification for gas burning appliances - Specification for domestic gas cooking appliances with forced-convection ovens) |
BS 5388-1976 |
喷头规范 |
(Specification for spray taps) |
BS 5391-1-1976 |
丙烯腈-丁二烯-苯乙烯(ABS)压力管规范.第1部分:工业用管 |
(Specification for acrylonitrile-butadiene-styrene (ABS) pressure pipe - Pipe for industrial uses) |
BS 5392-1-1976 |
丙烯腈-丁二烯-苯乙烯(ABS)压力管配件规范.第1部分:工业用管配件 |
(Specification for acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe - Fittings for use with pipe for industrial uses) |
BS 5395-1-2000 |
楼梯、梯子和走道.单跑楼梯和斜踏步的设计、制造和维修的实施规范 |
(Stairs, ladders and walkways - Code of practice for the design, construction and maintenance of straight stairs and winders) |
BS 5395-2-1984 |
楼梯、梯子和走道.旋转式和盘旋式楼梯设计实用规程 |
(Stairs, ladders and walkways - Code of practice for the design of helical and spiral stairs) |
BS 5396-1976 |
船用固定式灭火器的无缝钢二氧化碳容器规范 |
(Specification for seamless steel CO) |
BS 5397-6-1990 |
高级数据链路控制规程.第6部分:多链程序规范 |
(High-level data link control (HDLC) procedures - Specification for multilink procedures) |
BS 5398-1976 |
渔网的缀合与连结法分类 |
(Classification of methods for mounting and joining of fishing nets) |
BS 5400-1-1988 |
钢、混凝土及混合结构桥.第1部分:一般说明 |
(Steel, concrete and composite bridges - General statement) |
BS 5400-10-1980 |
钢、混凝土及混合结构桥.第10部分:评价疲劳强度的实用规范 |
(Steel, concrete and composite bridges - Code of practice for fatigue) |
BS 5400-10C-1999 |
钢混凝土混合桥梁.疲劳的详细分类图 |
(Steel, concrete and composite bridges - Charts for classification of details for fatigue) |
BS 5400-3-2000 |
钢、混凝土及混合结构桥.钢桥设计的实施规程 |
(Steel, concrete and composite bridges - Code of practice for design of steel bridges) |
BS 5400-4-1990 |
钢、混凝土及混合结构桥.第4部分:混凝土桥设计实用规程 |
(Steel, concrete and composite bridges - Code of practice for design of concrete bridges) |
BS 5400-5-1979 |
钢、混凝土及混合结构桥.第5部分:混合结构桥设计实用规范 |
(Steel, concrete and composite bridges - Code of practice for design of composite bridges) |
BS 5400-6-1999 |
钢混凝土混合桥梁.材料,工艺和钢的规格 |
(Steel, concrete and composite bridges - Specification for materials and workmanship, steel) |
BS 5400-7-1978 |
钢、混凝土及混合结构桥.第7部分:材料和加工质量、混凝土、钢筋及预应力钢筋束规范 |
(Steel, concrete and composite bridges - Specification for materials and workmanship, concrete, reinforcement and prestressing tendons) |
BS 5400-8-1978 |
钢、混凝土及混合结构桥.第8部分:材料和加工质量、混凝土、钢筋及预应力钢筋束推荐规范 |
(Steel, concrete and composite bridges - Recommendations for materials and workmanship, concrete, reinforcement and prestressing tendons) |
BS 5400-9.1-1983 |
钢、混凝土及混合结构桥.桥支承架.桥支承架设计实施规程 |
(Steel, concrete and composite bridges - Bridge bearings - Code of practice for design of bridge bearings) |
BS 5400-9.2-1983 |
钢、混凝土及混合结构桥.桥支承架.桥支承架的材料、加工和安装规范 |
(Steel, concrete and composite bridges - Bridge bearings - Specification for materials, manufacture and installation of bridge bearings) |
BS 5401-1990 |
农林用拖拉机及机具操作人员手册的信息量和表述方法 |
(Guide to information content and presentation of operators’ manuals provided for tractors and machinery for agriculture and forestry) |
BS 5402-1976 |
病人用手推车规范 |
(Specification for patient trolleys) |
BS 5404-1-1976 |
塑料实验室容器规范.第1部分:烧杯 |
(Specification for plastics laboratory ware - Beakers) |
BS 5404-2-1977 |
塑料实验室容器规范.第2部分:有刻度的量筒 |
(Specification for plastics laboratory ware - Graduated measuring cylinders) |
BS 5404-3-1977 |
塑料实验室容器规范.第3部分:滤液漏斗 |
(Specification for plastics laboratory ware - Filter funnels) |
BS 5404-4-1979 |
塑料实验室容器规范.第4部分:洗涤瓶 |
(Specification for plastics laboratory ware - Wash bottles) |
BS 5406-1-1988 |
家用及类似电气设备在供电系统内引起的干扰.术语词汇 |
(Disturbances in supply systems caused by household appliances and similar electrical equipment - Glossary of terms) |
BS 5409-1-1976 |
尼龙管规范.第1部分:主要用于气动装置的11型及12型全增塑尼龙管 |
(Specification for nylon tubing - Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations) |
BS 5409-2-1978 |
尼龙管规范.第2部分:主要用于汽车工业的11型及12型增塑或未增塑的尼龙管 |
(Specification for nylon tubing - Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry) |
BS 5410-1-1998 |
燃油规范.输出功率小于和等于45KW的环流供暖及热水供应用锅炉装置 |
(Code of practice for oil firing - Installations up to 45 kW output capacity for space heating and hot water supply purposes) |
BS 5410-2-1978 |
燃油实施规范.空间加热、热水和蒸汽供应设备用输出功率为大于和等于45kW的装置 |
(Code of practice for oil firing - Installations of 45 kW and above output capacity for space heating, hot water and steam supply services) |
BS 5410-3-1976 |
燃油实用规程.第3部分:加热炉、火炉、烤炉及其他工业用锅炉装置 |
(Code of practice for oil firing - Installations for furnaces, kilns, ovens and other industrial purposes) |
BS 5412-1996 |
适用于最大PN 10、最低液压0.01MPa(0.1bar)的低阻单一和复合龙头组件 |
(额定尺寸(Specification for low-resistance single taps and combination tap assemblies (nominal size) |
BS 5414-1976 |
渔网网纱伸长度测定的试验方法 |
(Method of test for determination of elongation of netting yarns for fishing nets) |