标准号 |
中文名称 |
英文名称 |
BS IEC 62264-2-2005 |
企业控制系统一体化.对象模型属性 |
|
BS IEC 796-1-1991 |
微处理机系统总线.8位和16位数据多路总线I(MULTIBUSI).第1部分:电气和定时特性功能描述 |
Microprocessor system bus - 8-bit and 16-bit data MULTIBUS I. Functional description with electrical and timing specifications |
BS IEC 796-2-1991 |
微处理机系统总线.8位和16位数据多路总线Ⅰ.第2部分:具有边缘连接器(直接式)的系统总线配置用机械和插脚描述 |
Microprocessor system bus - 8-bit and 16-bit data MULTIBUS I. Mechanical and pin descriptions for the system bus configuration, with edge connectors (direct) |
BS IEC 796-3-1991 |
微处理机系统8位和16位数据多路总线Ⅰ.具有插脚和插座连接器(间接式)的欧洲卡配置用机械和插脚描述 |
(Microprocessor system bus - 8-bit and 16-bit data MULTIBUS I. Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors) |
BS IEC 823-1991 |
微处理机系统总线(VMS总线).IEC 821总线(VME总线)的串行子系统总线 |
(Microprocessor system bus (VMSbus) - Serial sub-system bus of the IEC 821 bus (VMEbus)) |
BS IEC TR 61334-5-2-1998 |
使用配电线荷载系统的自动化配电.低层轮廓.频移键控(FSK)轮廓 |
(Distribution automation using distribution line carrier systems - Lower layer profiles - Lower layer profiles - Frequency shift keying (FSK) profile) |
BS IEC TR 62157-2001 |
圆柱形加工的碳电极.标称尺寸 |
Cylindrical machined carbon electrodes - Nominal dimensions |
BS IEC TS 60034-18-34-2000 |
旋转电机.绝缘系统的功能评定.模绕组线的试验步骤.绝缘系统的热机耐久性评定 |
Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
BS IEC TS 60695-9-2-2001 |
火灾试验.火焰表面扩散.试验方法的概要及其相关方面 |
Fire hazard testing - Surface spread of flame - Summary and relevance of test methods |
BS IEC TS 60825-6-1999 |
激光产品的安全性.排除用于传到人眼的可见信息光源的产品安全性 |
Safety of laser products - Safety of laser products with optical sources, exclusively used for visible information transmission to the human eye |
BS IEC TS 61813-2001 |
带电工作.带绝缘臂的架空设备的养护、维修和使用试验 |
Live working - Care, maintenance and in-service testing of aerial devices with insulating booms |
BS IEC/TR 61838-2001 |
核动力工厂.指令和控制功能分级用安全评价概率的使用 |
Nuclear power plants - Use of probabilistic safety asessment for the classification of instrumentation and control functions |
BS IEC/TS 60695-8-2-2001 |
火灾试验.放热.试验方法的概要及其相关方面 |
Fire hazard testing - Heat release - Summary and relevance of test methods |
BS ISO 1000-2004 |
SI单位及其倍数单位和一些其他单位应用的建议 |
|
BS ISO 10002-2004 |
质量管理.用户满意度.机构中投诉处理指南 |
|
BS ISO 10002-2004 |
质量管理.用户满意度.机构中投诉处理指南 |
|
BS ISO 10005-1996 |
质量管理.质量计划导则 |
Quality management - Guidelines for quality plans |
BS ISO 10005-2005 |
质量管理体系.质量计划指南 |
|
BS ISO 10006-1998 |
质量管理.项目质量管理指南 |
Quality management - Guidelines to quality in project management |
BS ISO 10006-2003 |
质量管理体系.项目的质量管理导则 |
(Quality management systems - Guidelines for quality management in projects) |
BS ISO 10007-2003 |
质量管理体系.技术状态管理指南 |
(Quality management systems - Guidelines for configuration management) |
BS ISO 10012-2-1997 |
测量设备的质量保证.测量过程控制导则 |
Quality assurance for measuring equipment - Guidelines for control of measurement processes |
BS ISO 10015-2000 |
质量管理.培训导则 |
Quality management - Guidelines for training |
BS ISO 10019-2005 |
质量管理体系顾问的选择和享受其所提供服务的导则 |
|
BS ISO 10044-1997 |
银行和有关的财务服务设施.信息交流.押汇信用证形式 |
Banking and related financial services. Information interchange. Documentary credit form |
BS ISO 10045-1993 |
高山雪橇.紧固安装部位.试验螺钉的要求 |
Alpine skis - Binding mounting area - Requirements for test screws |
BS ISO 10054-1998 |
内燃压燃式发动机.稳定状态下发动机运转产生烟雾的测量仪器.过滤型烟雾计 |
Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter type smokemeter |
BS ISO 10056-2001 |
机械振动.铁路车辆里乘客和乘务员全身振动的测量和分析 |
Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
BS ISO 10059-2-2004 |
致密、定型耐火制品.冷压强度测定.有热片试验 |
|
BS ISO 1007-2000 |
摄影技术.135号胶卷暗盒.规范 |
Photography - 135-size film and magazine - Specifications |
BS ISO 10071-1-2001 |
压印工具.球锁式冲压.轻载的球锁式冲压 |
Tools for pressing - Ball-lock punches - Ball-lock punches for light duty |
BS ISO 10071-2-2005 |
冲压工具.球形锁紧冲床.用于重载荷的球形锁紧冲床 |
|
BS ISO 10072-2004 |
模铸工具.浇口套.尺寸 |
|
BS ISO 1008-1995 |
摄影技术.相纸尺寸.单张相纸 |
Photography - Paper dimensions - Pictorial sheets |
BS ISO 10081-1-2003 |
致密定型耐火制品的分类.硅酸铝 |
(Classification of dense shaped refractory products - Alumina-silica) |
BS ISO 10081-2-2003 |
致密定型耐火制品的分类.含残留碳小于7%的碱性制品 |
(Classification of dense shaped refractory products - Basic products containing less than 7 % residual carbon) |
BS ISO 10081-3-2003 |
致密定型耐火制品的分类.含残留碳7%-50%的碱性制品 |
(Classification of dense shaped refractory products - Basic products containing from 7 % to 50 % residual carbon) |
BS ISO 10086-2-2004 |
煤.选煤用絮凝剂评价方法.旋转真空过滤设备中作为助滤剂的絮凝剂 |
|
BS ISO 10086-2-2004 |
煤.选煤用絮凝剂评价方法.旋转真空过滤设备中作为助滤剂的絮凝剂 |
|
BS ISO 1009-2001 |
摄影技术.相纸尺寸.印相机用卷纸 |
Photography - Paper dimensions - Rolls for printers |
BS ISO 10099-2001 |
气压液动.气液缸.最终检验和验收标准 |
Pneumatic fluid power - Cylinders - Final examination and acceptance criteria |
BS ISO 10100-2001 |
液压传动.液压缸.验收试验 |
Hydraulic fluid power - Cylinders - Acceptance tests |
BS ISO 10102-2001 |
螺钉和螺母用装配工具.工程用双头开口扳手.扳手长度和端口厚度 |
Assembly tools for screws and nuts - Double-headed open-ended engineers` wrenches - Length of wrenches and thickness of the heads |
BS ISO 10103-2001 |
螺钉和螺母用装配工具.双头平直和弯头套筒扳手.扳手长度和端口厚度 |
Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads |
BS ISO 10104-2001 |
螺钉和螺母用装配工具.双头高弯头和改进的弯头套筒扳手.扳手长度和端口厚度 |
Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads |
BS ISO 10109-1-1995 |
光学和光学仪表.环境要求.通用信息,定义,气候带及其参数 |
Optics and optical instruments - Environmental requirements - General information, definitions, climatic zones and their parameters |
BS ISO 10109-11-2001 |
光学和光学仪器.环境要求.户外条件下使用的光学仪器 |
Optics and optical instruments - Environmental requirements - Optical instruments for outdoor conditions of use |
BS ISO 10109-12-2004 |
光学和光学仪器.环境要求.光学仪器的运输条件 |
|
BS ISO 10109-4-2001 |
光学和光学仪器.环境要求.望远镜系统的试验要求 |
Optics and optical instruments - Environmental requirements - Test requirements for telescopic systems |
BS ISO 10109-6-1995 |
光学和光学仪表.环境要求.医用光学装置的试验要求 |
Optics and optical instruments - Environmental requirements - Test requirements for medical optical devices |
BS ISO 10109-7-2002 |
光学和光学仪器的环境要求.光学测量仪器的试验要求 |
Optics and optical instruments - Environmental requirements - Test requirements for optical measuring instruments |
BS ISO 10109-8-1995 |
光学和光学仪表.环境要求.使用极端条件的试验要求 |
Optics and optical instruments - Environmental requirements - Test requirements for extreme conditions of use |
BS ISO 10110-1-1996 |
光学及光学仪器.光学件和系统图形的制备.第1部分:总则 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - General |
BS ISO 10110-10-1996 |
光学及光学仪器.光学件和系统图形的制备.第10部分:表示数据表 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Table representing data of a lens element |
BS ISO 10110-11-1996 |
光学及光学仪器.光学件和系统图形的制备.第11部分:不容许数据 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Non-toleranced data |
BS ISO 10110-12-1997 |
光学及光学仪器.光学件和系统图形的制备.第12部分:非球面形表面 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Aspheric surfaces |
BS ISO 10110-13-1998 |
光学和光学仪器.光学件和系统图形的制备.第13部分:激光辐射损坏阈 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold |
BS ISO 10110-14-2003 |
光学和光学仪器.光学件和系统制图准备.波前变形公差 |
(Optics and optical instruments - Preparation of drawings for optical elements and systems - Wavefront deformation tolerance) |
BS ISO 10110-17-2004 |
光学和光学仪器.光学件和系统制图准备.激光辐射损害阈 |
|
BS ISO 10110-2-1996 |
光学及光学仪器.光学件和系统图形的制备.第2部分:材料不完全性.应力双折射 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Stress birefringence |
BS ISO 10110-3-1996 |
光学及光学仪器.光学件和系统图形的制备.第3部分:材料不完全性.气泡和杂质 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Bubbles and inclusions |
BS ISO 10110-4-1997 |
光学及光学仪器.光学件和系统图形的制备.第4部分:不完备材料的不均匀性和擦痕 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Material imperfections - Inhomogeneity and striae |
BS ISO 10110-5-1996 |
光学及光学仪器.光学件和系统图形的制备.第5部分:表面形状公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface form tolerances |
BS ISO 10110-6-1996 |
光学及光学仪器.光学件和系统图形的制备.第6部分:定中心公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Centring tolerances |
BS ISO 10110-7-1996 |
光学及光学仪器.光学件和系统图形的制备.第7部分:表面缺陷公差 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface imperfection tolerances |
BS ISO 10110-8-1998 |
光学及光学仪器.光学件和系统图形的制备.表面纹理 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface texture |
BS ISO 10110-9-1996 |
光学及光学仪器.光学件和系统图形的制备.第9部分:表面处理和涂层 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface treatment and coating |
BS ISO 10119-2002 |
碳纤维.测定密度 |
Carbon fibre - Determination of density |
BS ISO 1012-1999 |
摄影技术.普通软片和胶卷.尺寸 |
Photography - Films in sheets and rolls for general use - Dimensions |
BS ISO 10126-1-1992 |
银行业务.电文加密(大批)程序.第1部分:一般原则 |
Banking - Procedures for message encipherment (wholesale) - General principles |
BS ISO 10126-2-1992 |
银行业务.第2部分:信息编码程序(大规模).DEA算法 |
Banking - Procedures for message encipherment (wholesale) - DEA algorithm |
BS ISO 10135-2001 |
技术绘图.模件、铸件和锻压件的简化表示 |
Technical drawings - Simplified representation of moulded, cast and forged parts |
BS ISO 10154-1995 |
薄壁金属容器.三件向内卷曲颈马口铁气溶剂罐.顶端尺寸 |
Light gauge metal containers - Three-piece necked-in tinplate aerosol cans - Dimensions of the top end |
BS ISO 10155-1995 |
固定辐射源.颗粒的质量浓度的自动监控.性能特性、试验方法和规范 |
Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications |
BS ISO 10197-1994 |
显微照相.显微胶片阅读-印相机.特性 |
Micrographics - Reader-printers for transparent microforms - Characteristics |
BS ISO 10198-1994 |
缩微照相.16mm缩微胶卷用旋转式摄影机.机械及光学特性 |
Micrographics - Rotary camera for 16 mm microfilm - Mechanical and optical characteristics |
BS ISO 10202-2-1997 |
财务交易卡.集成电路卡财务交易系统的证券结构.第2部分:财务交易程序 |
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Transaction process |
BS ISO 10202-4-1997 |
金融交易卡.集成电路卡财务交易系统的证券结构.安全应用模块 |
Financial transaction cards. Security architecture of financial transaction systems using integrated circuit cards. Secure application modules |
BS ISO 10202-5-1999 |
金融交易卡.使用集成电路卡的金融交易系统的安全结构.算法的使用 |
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Use of algorithms |
BS ISO 10202-7-1999 |
金融交易卡.使用集成电路卡的金融交易系统的安全结构.键管理 |
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Key management |
BS ISO 10202-8-1999 |
金融交易卡.使用集成电路卡的金融交易系统的安全结构.第8部分:一般原则和概述 |
Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - General principles and overview |
BS ISO 10209-1-2001 |
技术产品文献.词汇.与技术制图相关的术语.总则和制图种类 |
Technical product documentation - Vocabulary - Terms relating to technical drawings: General and types of drawings |
BS ISO 10223-1993 |
纺织机械.经编机.梳栉标准号 |
(Textile machinery - Flat warp knitting machines - Numbering of guide bars) |
BS ISO 10227-1997 |
人/人的代用品冲击(单向冲击)试验和评价.技术现状导则 |
(Human/human surrogate impact (single shock) testing and evaluation - Guidance on technical aspects) |
BS ISO 10228-1993 |
越野雪橇.紧固安装部位.试验螺钉的要求 |
(Cross-country skis - Binding mounting area - Requirements for test screws) |
BS ISO 10231-2003 |
摩托车轮胎.检验轮胎负荷的试验方法 |
(Motorcycle tyres - Test methods for verifying tyre capabilities) |
BS ISO 10242-1-1998 |
压力设备.模柄.A型 |
(Tools for pressing - Punch holder shanks - Type A) |
BS ISO 10245-4-2005 |
起重机.限制器和指示器.动臂起重机 |
|
BS ISO 10270-1996 |
金属及其合金的腐蚀.核动力反应堆用锆合金的耐水腐蚀试验 |
(Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors) |
BS ISO 10290-1994 |
纺织材料.棉纱.规范 |
Textiles - Cotton yarns - Specifications |
BS ISO 10294-1-1997 |
耐火试验.空气分配系统用火焰调节器.第1部分:试验方法 |
Fire-resistance tests - Fire dampers for air distribution systems - Test method |
BS ISO 10294-2-1999 |
耐火试验.空气分配系统用火焰调节器.试验结果的应用领域标准和分类 |
Fire-resistance tests - Fire dampers for air distribution systems - Classification, criteria and field of application of test results |
BS ISO 10294-3-1999 |
耐火试验.空气分配系统用火焰调节器.试验方法指南 |
Fire-resistance tests - Fire dampers for air distribution systems - Guidance on the test method |
BS ISO 10294-4-2001 |
耐火试验.空气分配系统用火焰调节器.热释放过程试验 |
Fire-resistance tests - Fire dampers for air distribution systems - Test of thermal release mechanism |
BS ISO 10294-5-2005 |
耐火试验.用于空气分配系统的防火阀.膨胀防火阀 |
|
BS ISO 10299-2001 |
航空航天.固体铆钉.材料和公制表示法 |
Aerospace - Rivets, solid - Material and metric series identification |
BS ISO 10300-1-2001 |
伞齿轮负载容量的计算.说明及一般影响因素 |
(Calculation of load capacity of bevel gears - Calculation of load capacity of bevel gears - Introduction and general influence factors) |
BS ISO 10300-2-2001 |
伞齿轮负载容量的计算.表面耐久性的计算(凹坑法) |
(Calculation of load capacity of bevel gears - Calculation of surface durability (pitting)) |
BS ISO 10300-3-2001 |
伞齿轮负载能力的计算.齿根强度的计算 |
(Calculation of load capacity of bevel gears - Calculation of tooth root strength) |
BS ISO 10303-1-1995 |
工业自动化系统和集成.产品数据表示和信息交流.综述和基本原理 |
(Industrial automation systems and integration - Product data representation and exchange - Overview and fundamental principles) |
BS ISO 10303-101-1995 |
工业自动化系统和集成.产品数据表示和信息交流.集成利用资源:制图 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated application resources: Draughting) |
BS ISO 10303-11-1995 |
工业自动化系统及集成.产品数据表示和交换.描述方法:EXPRESS语言参考手册 |
(Industrial automation systems and integration - Product data representation and exchange - Description methods: the EXPRESS language reference manual) |
BS ISO 10303-201-1995 |
工业自动化系统和集成.产品数据表示和信息交流.应用协议:制图说明 |
(Industrial automation systems and integration - Product data representation and exchange - Application protocol: Explicit draughting) |
BS ISO 10303-203-1996 |
工业自动化系统和集成电路.产品数据表示和信息交流.第203部分:利用协议:性位控制设计 |
(Industrial automation systems and integration - Product data representation and exchange - Application protocol - Configuration controlled design) |
BS ISO 10303-21-1995 |
工业自动化系统和集成.产品数据表示和信息交流.执行方法:交换结构的明码电文编码 |
(Industrial automation systems and integration - Product data representation and exchange - Implementation methods - Clear text encoding of the exchange structure) |
BS ISO 10303-22-1999 |
工业自动化系统和集成电路.产品数据表示和交换.实现方法.标准数据存取接口 |
(Industrial automation systems and integration - Product data representation and exchange - Implementation methods - Standard data access interface) |
BS ISO 10303-31-1995 |
工业自动化系统及集成.产品数据表示和交换.一致性试验的方法论和基本结构:一般概念 |
(Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: general concepts) |
BS ISO 10303-32-1998 |
工业自动化系统和集成电路.产品数据表示和交换.一致性测试方法和结构:实验室和试验人员的要求 |
(Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: Requirements on testing laboratories and clients) |
BS ISO 10303-41-1995 |
工业自动化系统和集成.产品数据表示和信息交流.集成总资源:产品描述和供应基础 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources - Fundamentals of product description and support) |
BS ISO 10303-42-1995 |
工业自动化系统和集成.产品数据表示和信息交流.集成总资源:地理和拓扑表示法 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources - Geometric and topological representation) |
BS ISO 10303-43-1995 |
工业自动化系统和集成.产品数据表示和信息交流.集成总资源:结构表示法 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: Representation structures) |
BS ISO 10303-44-1995 |
工业自动化系统和集成.产品数据表示和信息交流.集成总资源:产品结构配置 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: Product structure configuration) |
BS ISO 10303-45-1999 |
工业自动化系统和集成.产品数据表示和交换.第45部分:集成设备:材料 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resource: Materials) |
BS ISO 10303-46-1995 |
工业自动化系统和集成.产品数据表示和信息交流.集成总资源:视频表示法 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: visual presentation) |
BS ISO 10303-47-1998 |
工业自动化系统和集成.产品数据表示和交换.第47部分:集成设备:形状变化公差 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resource - Shape variation tolerances) |
BS ISO 10303-49-1998 |
工业自动化系统和集成电路.产品数据表示和交换.集成电路总资源:工艺结构和特性 |
(Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: Process structure and properties) |
BS ISO 10312-1995 |
环境空气.石棉纤维的测定.直接传递透射电子显微法 |
Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method |
BS ISO 10326-2-2001 |
机械振动.车辆座位振动评价的实验室方法.铁路车辆的应用 |
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Application to railway vehicles |
BS ISO 10328-1-1997 |
修复术.假腿修复的结构检验.试验配置 |
Prosthetics.Structural testing of lower-limb prostheses - Test configurations |
BS ISO 10328-2-1997 |
修复术.假腿修复的结构检验.试验样品 |
Prosthetics.Structural testing of lower-limb prostheses - Test samples |