标准号 |
中文名称 |
英文名称 |
BS ISO 11944-1995 |
薄壁金属容器用圆体模. 最大容量为10 000 ml 的圆柱形罐和圆锥形罐的普通直径 |
Round general use light gauge metal containers - Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity |
BS ISO 11948-1-1997 |
排尿装置.第1部分:整品检验 |
Urine-absorbing aids - Whole-product testing |
BS ISO 11948-2-1998 |
小便吸收装置.第2部分:轻度不能自制与低压条件下短时间液体释放(泄漏)的测定 |
Urine-absorbing aids - Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure |
BS ISO 11962-2002 |
缩微照相.带16 mm 和35 mm 成卷形式使用的冲击标记 |
Micrographics - Image mark (blip) used with 16 mm and 35 mm roll microfilm |
BS ISO 11994-1998 |
起重机.有效性.词汇 |
Cranes - Availability - Vocabulary |
BS ISO 11997-1-2005 |
色漆和清漆.耐周期性腐蚀的测定.湿(盐雾)/干燥/湿度影响试验 |
|
BS ISO 12000-2000 |
塑料/橡胶.聚合物的分散及橡胶乳(天然的和合成的)的清析度.试验方法的定义和复审 |
Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Definitions and review of test methods |
BS ISO 12003-1-2002 |
农林用拖拉机.窄轮距轮式拖拉机.前置倾翻保护装置 |
Agricultural and forestry tractors - Narrow-track wheeled tractors - Front-mounted roll-over protective structures |
BS ISO 12003-2-2002 |
农林用拖拉机.窄轮距轮式拖拉机.后置倾翻保护装置 |
Agricultural and forestry tractors - Narrow-track wheeled tractors - Rear-mounted roll-over protective structures |
BS ISO 12006-2-2001 |
建筑施工.施工作业的信息组织.信息分类的框架 |
|
BS ISO 12006-2-2001 |
建筑施工.施工作业的信息组织.信息分类的框架 |
Building construction - Organization of information about construction works - Framework for classification of information |
BS ISO 1202-2001 |
香精油.1,8桉树脑含量的测定 |
Essential oils - Determination of 1,8-cineole content |
BS ISO 1203-1998 |
摄影技术.卷筒软片制版照相机.后窗位置 |
Photography - Roll film cameras - Back window location |
BS ISO 12040-1997 |
印刷技术.印刷和印刷油墨.使用过滤氙弧灯评价色牢度 |
Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light |
BS ISO 12043-1995 |
滚动轴承.单列角面接触的滚子轴承.平挡圈和无活塞胀圈槽之间的突缘的倒棱尺寸 |
Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides |
BS ISO 12044-1995 |
滚动轴承.单列角面接触的球轴承.外圈无测推力边的倒棱尺寸 |
Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side |
BS ISO 12058-1-1997 |
塑料.使用落球粘度计测定粘度.斜管法 |
Plastics - Determination of viscosity using a falling-ball viscometer - Inclined-tube method |
BS ISO 1206-2002 |
滚动轴承.尺寸系列为48,49和69的滚针轴承.边界尺寸和公差 |
Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances |
BS ISO 12080-1-2000 |
干脱脂奶.维生素A含量的测定.比色法 |
Dried skimmed milk - Determination of vitamin A content - Colorimetric method |
BS ISO 12080-2-2000 |
干脱脂奶.维生素A含量的测定.高性能液相色谱法 |
Dried skimmed milk - Determination of vitamin A content - Method using high-performance liquid chromatography |
BS ISO 12081-1999 |
牛奶.钙含量的测定.滴定法 |
Milk - Determination of calcium content - Titrimetric method |
BS ISO 12097-1-2003 |
道路车辆.安全气囊零部件.词汇 |
(Road vehicles - Airbag components - Vocabulary) |
BS ISO 12097-3-2003 |
道路车辆.气囊零部件.充气机组件的检验 |
(Road vehicles - Airbag components - Testing of inflator assemblies) |
BS ISO 12103-1-1998 |
道路车辆.过滤器评价尘土试验.第1部分:尘土试验方法 |
(Road vehicles - Test dust for filter evaluation - Arizona test dust) |
BS ISO 12103-2-1998 |
道路车辆.过滤器评定用试验粉尘.氧化铝试验粉尘 |
Road vehicles - Test dust for filter evaluation - Aluminium oxide test dust |
BS ISO 12107-2003 |
金属材料.疲劳试验.数据的统计规划和分析 |
(Metallic materials - Fatigue testing - Statistical planning and analysis of data) |
BS ISO 12108-2003 |
金属材料.疲劳试验.疲劳裂痕增长试验 |
(Metallic materials - Fatigue testing - Fatigue crack growth method) |
BS ISO 12124-2001 |
声学.助听器真耳声学特性测量的过程 |
(Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids) |
BS ISO 12128-2002 |
滑动轴承.润滑油孔、油槽油穴.轴衬的尺寸、类型、标记及其应用 |
Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes |
BS ISO 12129-2-1995 |
滑动轴承.轴、法兰和止推安装环的形状、位置和表面粗糙度的公差 |
Plain bearings - Tolerances on form and position and surface roughness for shafts, flanges and thrust collars |
BS ISO 12132-2000 |
滑动轴承.薄壁轴瓦质量评价.FMEA设计 |
Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA |
BS ISO 12140-1999 |
农业机械.农用挂车和拖挂设备.牵引机构 |
(Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks) |
BS ISO 12141-2002 |
固定污染源的排放.在低浓度时颗粒物质(灰尘)的质量浓度的测定.手工重量分析法 |
(Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method) |
BS ISO 12142-2001 |
电子成像.验证光盘上存储的数据用介质误差监测和报告技术 |
Electronic imaging - Media error monitoring and reporting techniques for verification of stored data on optical digital data disks |
BS ISO 12151-1-1999 |
液压流体力学和一般用途的连接件.软管配件.有ISO 8434-3 O型环对接密封端的软管组件 |
Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends |
BS ISO 12151-2-2003 |
液压传动和通用联接件.软管接头.带ISO 8434-1和ISO 8434-4 O形圈24锥形末端的软管接头 |
(Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ?cone connector ends with O-rings) |
BS ISO 12151-3-1999 |
液压流体力学和一般应用的连接件.软管配件.带ISO 6162法兰末端的软管配件 |
Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends |
BS ISO 12156-2-1999 |
柴油.高频往复钻机(HFRR)用润滑剂性能评定.第2部分:极限值 |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Limit |
BS ISO 12164-1-2002 |
带法兰接触面的空心圆锥界面.刀柄.尺寸 |
Hollow taper interface with flange contact surface - Shanks - Dimensions |
BS ISO 12164-2-2002 |
带法兰接触面的空心圆锥界面.接收器.尺寸 |
Hollow taper interface with flange contact surface - Receivers - Dimensions |
BS ISO 12165-2000 |
铸模工具.压缩、注模和压铸模用件.术语和符号 |
Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols |
BS ISO 1217-1997 |
容积式压缩机.验收试验 |
Displacement compressors - Acceptance tests |
BS ISO 12171-2002 |
空间数据和信息传输系统.遥控指令.信道服务 |
(Space data and information transfer systems - Telecommand - Channel service) |
BS ISO 12172-2003 |
空间数据和信息传输系统.遥控.数据路由服务 |
(Space data and information transfer systems - Telecommand - Data routing service) |
BS ISO 12173-2003 |
空间数据和信息传输系统.遥控.指令执行程序 |
(Space data and information transfer systems - Telecommand - Command operation procedures) |
BS ISO 12174-2003 |
空间数据和信息传输系统.遥控.数据管理业务的体系规范 |
(Space data and information transfer systems - Telecommand - Architectural specification for the data management service) |
BS ISO 1219-2-1996 |
流体动力系统和件.图形符号和电路图.第2部分:电路图 |
Fluid power systems and components - Graphic symbols and circuit diagrams - Circuit diagrams |
BS ISO 12192-2002 |
纸和纸板.压缩强度.环压法 |
Paper and board - Compressive strength - Ring crush method |
BS ISO 12197-1997 |
半圆键槽铣刀.尺寸 |
Woodruff keyseat cutters - Dimensions |
BS ISO 12199-2002 |
用阿拉伯字母表示的多语种术语和字典编辑的数字的字母顺序 |
Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet |
BS ISO 12213-1-1998 |
天然气.压缩系数的计算.介绍和导则 |
Natural gas - Calculation of compression factors - Introduction and guidelines |
BS ISO 12213-2-1998 |
天然气.压缩因数的计算.第2部分:摩尔代数运算分析 |
Natural gas - Calculation of compression factors - Calculation using a molar composition analysis |
BS ISO 12213-3-1998 |
天然气.压缩系数的计算.实测物理性能计算 |
Natural gas - Calculation of compression factors - Calculation using measured physical properties |
BS ISO 12214-2002 |
道路车辆.汽车手控装置的转向指示器 |
Road vehicles - Direction-of-motion stereotypes for automotive hand controls |
BS ISO 12218-1997 |
制图技术.过程控制.胶印板标记 |
Graphic technology - Process control - Offset platemaking |
BS ISO 1222-2003 |
摄影.三脚架连接件 |
(Photography - Tripod connections) |
BS ISO 12222-2001 |
电影摄影.在16mm、35mm和65mm电影胶片上制造厂名的印制和潜在影象的识别.规范和尺寸 |
Cinematography - Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film - Specifications and dimensions |
BS ISO 1223-1995 |
电影技术.供电视用电影胶片和幻灯片的画面.位置和尺寸 |
Cinematography - Picture areas for motion-picture films and slides for television - Position and dimensions |
BS ISO 1223-2003 |
电影技术.电视用影片画面.位置和尺寸 |
(Cinematography - Picture areas for motion-picture films for television - Position and dimensions) |
BS ISO 12231-1997 |
摄影.电子照相机.术语 |
Photography - Electronic still picture cameras - Terminology |
BS ISO 12232-1998 |
摄影.电子静物摄影照相机.ISO速度测定 |
Photography - Electronic still-picture cameras - Determination of ISO speed |
BS ISO 12233-2000 |
摄影.电子静物照相机.分辨率测量 |
Photography - Electronic still picture cameras - Resolution measurements |
BS ISO 12234-1-2002 |
电子静态图像的成象.可装卸存储器.基本可装卸存储器模型 |
Electronic still-picture imaging - Removable memory - Basic removable-memory module |
BS ISO 12234-2-2001 |
电子静止画面成像.可去除存储.TIFF/EP图像数据格式 |
Electronic still-picture imaging - Removable memory - TIFF/EP image data format |
BS ISO 12238-2001 |
气压液动.方向控制阀门.转换时间的测量 |
(Pneumatic fluid power - Directional control valves - Measurement of shifting time) |
BS ISO 12240-1-1998 |
关节轴承.径向关节轴承 |
Spherical plain bearings - Radial spherical plain bearings |
BS ISO 12240-2-1998 |
关节轴承.角面接触径向关节轴承 |
Spherical plain bearings - Angular contact radial spherical plain bearings |
BS ISO 12240-3-1998 |
关节轴承.止推关节轴承 |
(Spherical plain bearings - Thrust spherical plain bearings) |
BS ISO 12240-4-1998 |
关节轴承.径向关节轴承杆端 |
(Spherical plain bearings - Spherical plain bearing rod ends) |
BS ISO 12256-2002 |
内十字形槽扳手.米制系列 |
(Drives, internal, cruciform, ribbed - Metric series) |
BS ISO 12277-2000 |
航空航天.带镗孔标准系列浮动自锁定同轴槽铁.等级:1100 MPa(室温)/120℃、1100 MPa(室温)/235℃、1100 MPa( |
(Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications - 1100 MPa (at ambient temperature)/120 ℃, 1100 MPa (at ambient temperature)/235℃ and 1100 MPa () |
BS ISO 123-2001 |
橡胶胶乳.取样 |
Rubber latex - Sampling |
BS ISO 1230-1995 |
摄影技术.闪光指数的测定 |
(Photography - Determination of flash guide numbers) |
BS ISO 12303-1995 |
滑滚动轴承.质量特性.机器和加工能力的计算 |
(Plain bearings - Quality characteristics - Calculation of machine and process capabilities) |
BS ISO 12307-2-2000 |
滑动轴承.卷制衬套的检验.内径检验 |
(Plain bearings - Checking of wrapped bushes - Checking the inside diameter) |
BS ISO 12333-2000 |
航空航天.连续置换液压发动机.35000KPa系统的一般规范 |
Aerospace - Constant displacement hydraulic motors - General specifications for 35000 kPa systems |
BS ISO 12334-2000 |
航空航天.液压的压力补偿的变量输送泵.35000KPa系统的一般要求 |
Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems |
BS ISO 12345-2003 |
柴油发动机.燃料喷射设备的清洁度评定 |
(Diesel engines - Cleanliness assessment of fuel injection equipment) |
BS ISO 12353-1-2002 |
道路车辆.交通事故分析.词汇 |
Road vehicles - Traffic accident analysis - Vocabulary |
BS ISO 12353-2-2003 |
道路车辆.交通事故分析.严重冲击测量法的使用指南 |
(Road vehicles - Traffic accident analysis - Guidelines for the use of impact severity measures) |
BS ISO 12368-2001 |
农用车辆.牵引车辆上机械吊钩式连接件.试验方法和要求 |
Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements |
BS ISO 1241-2001 |
香精油.酯化值的测定.乙酰化之前和之后自由和总乙醇含量的评价 |
Essential oils - Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols |
BS ISO 1242-2001 |
香精油.酸值的测定 |
Essential oils - Determination of acid value |
BS ISO 12472-2003 |
木制门组件的耐火性.膨胀型密封剂工效的测定方法 |
(Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals) |
BS ISO 12478-1-1998 |
起重机.维修手册.概述 |
Cranes - Maintenance manual - General |
BS ISO 12488-4-2004 |
起重机.轮子和移动及横动轨道的公差.动臂起重机 |
|
BS ISO 12488-4-2004 |
起重机.轮子和移动及横动轨道的公差.动臂起重机 |
|
BS ISO 125-2003 |
浓缩天然胶乳.碱度测定 |
(Natural rubber latex concentrate - Determination of alkalinity) |
BS ISO 12606-1997 |
电影摄影.电影和电视磁声频录音胶片的保护和保存 |
Cinematography - Care and preservation of magnetic audio recordings for motion-pictures and television |
BS ISO 12608-1997 |
电影摄影术.再现电视显示电视节目评定用放映室和环境条件 |
Cinematography - Room and surround conditions for evaluating television display from telecine reproduction |
BS ISO 12611-1997 |
电影摄影.35mm磁胶片主片的国际交换用拾音头音调.规格及安装 |
Cinematography - Audio head tones for use in international exchange of 35 mm magnetic film masters - Specifications and location |
BS ISO 12611-2004 |
电影.用于国际素材交换的35mm模拟磁片带头检测信号.规范和位置 |
|
BS ISO 12611-2004 |
电影.用于国际素材交换的35mm模拟磁片带头检测信号.规范和位置 |
|
BS ISO 12612-1997 |
电影摄影.接线柱生产材料的交换 |
Cinematography - Interchange of post-production materials |
BS ISO 12616-2002 |
与翻译相关的术语 |
Translation-oriented terminography |
BS ISO 12620-2003 |
术语中的计算机应用.数据目录 |
(Computer applications in terminology - Data categories) |
BS ISO 12634-1997 |
制图技术.用旋转粘度剂测定糊状油墨和载色剂的粘着性 |
Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter |
BS ISO 12635-1996 |
印刷技术.胶版印刷用胶印版.尺寸 |
(Graphic technology - Plates for offset printing - Dimensions) |
BS ISO 12636-1998 |
印刷技术.胶版印刷用橡皮 |
(Graphic technology - Blankets for offset printing) |
BS ISO 12637-5-2001 |
印刷技术.印刷艺术的多语种术语.丝网印刷术语 |
(Graphic technology - Multilingual terminology of printing arts - Screen printing terms) |
BS ISO 12639-1998 |
印刷技术.预压数字数据交换.成像技术用标识符成像文件格式(TIFF/IF) |
(Graphic technology - Prepress digital data exchange - Tag image file format for image technology (TIFF/IT)) |
BS ISO 12640-1998 |
图形技术.预压数字数据交换.CMYK标准彩色图像数据(CMKY/SCID) |
(Graphic technology - Prepress digital data exchange - CMYK standard colour image data (CMYK/SCID)) |
BS ISO 12640-2-2004 |
印刷技术.印前数字数据交换.XYZ/sRGB编码的标准彩色图像数据(XYZ/SCID) |
|
BS ISO 12641-1998 |
图解技术.预印数字型数据交换.输入扫描校正色度目标 |
Graphic technology - Prepress digital data exchange - Colour targets for input scanner calibration |
BS ISO 12642-1997 |
制图技术.预处理数字数据交换.数据输入用4种颜色打印加工的特性记述. |
Graphic technology - Prepress digital data exchange - Input data for characterization of 4-colour process printing |
BS ISO 12644-1997 |
制图技术.用降落竿粘度计测定糊状油墨和展色剂的流动性 |
Graphic technology - Determination of rheological properties of paste inks and vehicles by the falling rod viscometer |
BS ISO 12645-2000 |
图形技术.过程控制.透射密度计不透明区校准用检定标准物质 |
Graphic technology - Process control - Certified reference material for opaque area calibration of transmission densitometers |
BS ISO 12647-1-1997 |
制图技术.中间色调分离、校对和印刷品制作过程控制.第1部分:媒介变数和测量法 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Parameters and measurement methods |
BS ISO 12647-2-1997 |
制图技术.中性颜色分离、试验和印刷品的生产控制方法.第2部分:平石版印刷法 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Offset lithographic processes |
BS ISO 12647-2-2004 |
印刷技术.网目调分色片、样张及印刷成品的加工过程控制.胶印 |
|
BS ISO 12647-3-1998 |
制图技术.中性颜色分离、试验和印刷品的生产控制方法.第3部分:新闻纸上的烫金排版胶版印刷法和活字印刷 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Coldset offset lithography and letterpress on newsprint |
BS ISO 12647-5-2001 |
印刷技术.网目调分色片、样张和印刷成品的加工过程控制.丝网印刷 |
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production prints - Screen printing |
BS ISO 12648-2003 |
图形技术.印刷机系统的安全要求 |
(Graphic technology - Safety requirements for printing press systems) |
BS ISO 12651-2000 |
电子成像.词汇 |
Electronic imaging - Vocabulary |
BS ISO 12653-1-2001 |
电子成像.办公文件黑白扫描用测试标板.特性 |
Electronic imaging - Test target for the black-and-white scanning of office documents - Characteristics |
BS ISO 12653-2-2001 |
电子成像.办公文件黑白扫描用测试标板.使用的方法 |
Electronic imaging - Test target for the black-and-white scanning of office documents - Method of use |
BS ISO 12656-2001 |
缩微照相.穿孔卡片上条形码的使用 |
Micrographics - Use of bar codes on aperture cards |
BS ISO 12676-2001 |
耐火制品.耐一氧化碳的测定 |
Refractory products - Determination of resistance to carbon monoxide |
BS ISO 1268-1-2002 |
纤维增强塑料.试验板的生产方法.通用条件 |
Fibre-reinforced plastics - Methods of producing test plates - General conditions |
BS ISO 1268-10-2005 |
纤维增强塑料.试验板的生产方法.BMC和其他长纤维化合物的注射模塑法.多用途试样的一般原则和模制 |
|