标准号 |
中文名称 |
英文名称 |
BS 6101-4-1987 |
机床滚珠丝杠.第4部分:静态轴向刚性计算法 |
(Machine tool ball screws - Method of calculation of static axial rigidity) |
BS 6101-5-1992 |
机床滚珠丝杠.第5部分:公称直径和额定负载规范 |
(Machine tool ball screws - Specification for nominal diameters and nominal leads) |
BS 6101-6-1990 |
机床滚珠丝杠.第6部分:丝杠用球状螺母和基本尺寸规范 |
(Machine tool ball screws - Specification for ball nuts and principal dimensions of ball screws) |
BS 6102-1-1992 |
自行车.自行车安全要求规范 |
(Cycles - Specification for safety requirements for bicycles) |
BS 6102-10-1987 |
自行车.第10部分:自行车车叉上装配顶部用的螺纹规范 |
(Cycles - Specification for screw threads used to assemble head fittings on bicycle forks) |
BS 6102-11-1991 |
自行车.第11部分:车把主管和弯管组装尺寸规范 |
(Cycles - Specification for assembly dimensions for stem and handlebar bend) |
BS 6102-12-1991 |
自行车.车把主管楔角规范 |
(Cycles - Specification for stem wedge angle) |
BS 6102-13-1991 |
自行车.第13部分:花键毂和后链轮的配合尺寸规范 |
(Cycles - Specification for mating dimensions for splined hub and sprocket) |
BS 6102-14-1991 |
自行车.第14部分:有方头配件的底托架轴和曲柄组件尺寸规范 |
Cycles - Specification for dimensions of bottom bracket axle and crank assembly with square end fittings |
BS 6102-15-1991 |
自行车.第15部分:辐条螺纹接头的尺寸规范 |
(Cycles - Specification for dimensions of spoke nipples) |
BS 6102-16-1997 |
自行车.更新制动块的规范 |
(Cycles - Specification for replacement brake blocks) |
BS 6102-2-1982 |
自行车.第2部分:反光装置的光学要求和物理要求规范 |
(Cycles - Specification for photometric and physical requirements of reflective devices) |
BS 6102-3-1986 |
自行车.照明玻璃的光度和物理要求规范 |
(Cycles - Specification for photometric and physical requirements of lighting equipment) |
BS 6102-4-1991 |
自行车.第4部分:术语汇编 |
(Cycles - Glossary of terms) |
BS 6102-5-1998 |
自行车.自行车轮命名与符号及尺寸规范 |
(Cycles - Specification for bicycle tyre designations and dimensions) |
BS 6102-6-1997 |
自行车.第6部分:脚踏车车辋规范 |
(Cycles - Specification for bicycle rims) |
BS 6102-8-1990 |
自行车.第8部分:自行车轴套上装配飞轮用的螺纹规范 |
(Cycles - Specifications for screw threads used to assemble freewheels on bicycle hubs.) |
BS 6102-9-1990 |
自行车.第9部分:底托组件用的螺纹规范 |
(Cycles - Specification for screw threads used in bottom bracket assemblies) |
BS 6103-1986 |
单孔并装有绝缘套管的心轴操作的电子件的装配尺寸规范 |
(Specification for dimensions for the mounting of single-hole, bush-mounted spindle operated electronic components) |
BS 6106-1981 |
消毒牛奶用一品脱(568ml)重复使用玻璃瓶 |
(Specification for 1 pint (568 ml) multi-trip glass bottles for pasteurized milk) |
BS 6107-3-1992 |
滚动轴承.公差.第3部分:径向内部间隙规范 |
(Rolling bearings: tolerances - Specifications for radial internal clearance) |
BS 6109-2-1989 |
车尾部升降机、移动式升降机和车载式升降斜梯.第2部分:载客升降机和斜梯实用规程 |
(Tail lifts, mobile lifts and ramps associated with vehicles - Code of practice for passenger lifts and ramps) |
BS 611-2-1990 |
陪替氏培养皿.第2部分:一次使用的陪替氏塑料培养皿规范 |
(Petri dishes - Specification for plastics Petri dishes for single use) |
BS 6111-1981 |
测量耳机助听器时用参考耦合器规范 |
(Specification for reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts) |
BS 6113-1981 |
运土用自动倾卸车车箱容积额定值确定的方法 |
(Method for volumetric rating of dumper bodies used for earth-moving) |
BS 6114-1987 |
运土用升降铲运机额定容量的测量方法 |
(Method for measurement of volumetric ratings of elevating scrapers used for earth-moving) |
BS 6117-1981 |
淡匍萄酒用玻璃瓶规范 |
(Specification for glass bottles for light wine) |
BS 6118-1981 |
重复使用的啤酒和苹果酒玻璃酒瓶规范 |
(Specification for multi-trip glass bottles for beer and cider) |
BS 6119-1-1981 |
充碳酸气的软饮料用玻璃瓶.第1部分:重复使用的750ml和1l瓶规范 |
(Glass bottles for carbonated soft drinks - Specification for 750 ml and 1 litre multi-trip bottles) |
BS 6120-1988 |
工业用低压开关设备和控制装置规范.A型交流双引线感应式近距离开关 |
(Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for alternating current, 2 terminals) |
BS 6121-2-1989 |
机械制电缆密封套.第2部分:聚合物电缆密封套规范 |
(Mechanical cable glands - Specification for polymeric glands) |
BS 6121-3-1990 |
机械制电缆密封套.第3部分:专用耐腐蚀夹套规范 |
(Mechanical cable glands - Specification for special corrosion resistant glands) |
BS 6121-5-1993 |
电缆机械密封套.第5部分:电气安装中使用的电缆密封套的选择、安装和检验实施准则 |
(Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands used in electrical installations) |
BS 6122-1988 |
工业用低压开关设备和控制装置规范.C型交流双引线感应式近距离开关 |
(Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form C, for alternating current, 2 terminals) |
BS 6123-1988 |
工业用低压开关设备和控制装置规范.D型交流双引线感应式近距离开关 |
(Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form D, for alternating current, 2 terminals) |
BS 6125-1981 |
天然纤维索、绳和线规范 |
(Specification for natural fibre cords, lines and twines) |
BS 6127-1-1995 |
烟煤和无烟煤的岩相分析.有关烟煤和无烟煤岩相分析的术语词汇 |
(Petrographic analysis of bituminous coal and anthracite - Glossary of terms relating to the petrographic analysis of bituminuous coal and anthracite) |
BS 6127-2-1982 |
烟煤和无烟煤的岩相分析.第2部分:岩相分析用煤样的制备方法 |
(Petrographic analysis of bituminous coal and anthracite - Method of preparing coal samples for petrographic analysis) |
BS 6127-3-1995 |
烟煤和无烟煤的岩相分析.烟煤和无烟煤的显微组分的测定方法 |
(Petrographic analysis of bituminous coal and anthracite - Method of determining maceral group composition of bituminous coal and anthracite) |
BS 6127-4-1990 |
烟煤和无烟煤的岩相分析.第4部分:煤岩显微类型、碳矿质和矿质成分的测定方法 |
(Petrographic analysis of bituminous coal and anthracite - Method of determining microlithotype, carbominerite and minerite composition) |
BS 6127-5-1995 |
烟煤和无烟煤的岩相分析.显微镜下测定镜质体反射率的方法 |
(Petrographic analysis of bituminous coal and anthracite - Method of determining microscopically the reflectance of vitrinite) |
BS 6128-13-1983 |
热固树脂制工业用层压杆及管.第13部分:矩形模制管规范 |
(Industrial laminated rods and tubes based on thermosetting resins - Specification for rectangular moulded tubes) |
BS 6128-6-1981 |
热固树脂制工业用层压杆及管.第6部分:六角形模制棒规范 |
(Industrial laminated rods and tubes based on thermosetting resins - Specification for hexagonal moulded rods) |
BS 6129-1-1981 |
压力系统用波纹管膨胀节的选择和应用实用规程.第1部分:金属波纹管膨胀节 |
(Code of practice for the selection and application of bellows expansion joints for use in pressure systems - Metallic bellows expansion joints) |
BS 613-1977 |
抑止电磁干扰用的部件和滤波器组件规范 |
(Specification for components and filter units for electromagnetic interference suppression) |
BS 6130-1-1993 |
地沥青及沥青用软管及软管部件.金属软管及软管部件规范 |
(Hose and hose assemblies for asphalt and bitumen - Specification for flexible metallic hose and hose assemblies) |
BS 6131-1982 |
家用缝纫机的术语词汇 |
(Glossary of terms relating to household sewing machines) |
BS 6132-1983 |
碱性可充电电池和蓄电池的安全操作实用规程 |
(Code of practice for safe operation of alkaline secondary cells and batteries) |
BS 6133-1995 |
铅酸固定蓄电池的安全操作实用规程 |
(Code of practice for safe operation of lead-acid stationary batteries) |
BS 6134-1992 |
压力和真空开关规范 |
(Specification for pressure and vacuum switches) |
BS 6137-1982 |
锡铅合金的电镀层规范 |
(Specification for electroplated coatings of tin/lead alloys) |
BS 6140-1-1981 |
产生振动用试验设备.第1部分:产生振动用电动试验设备性能的表述方法 |
(Test equipment for generating vibration - Methods of describing characteristics of electrodynamic test equipment for generating vibration) |
BS 6140-2-1982 |
产生振动用试验设备.第2部分:产生振动用试验设备辅助台特性的表述方法 |
(Test equipment for generating vibration - Methods of describing characteristics of auxiliary tables for test equipment for generating vibration) |
BS 6142-1981 |
农用拖拉机和机械中液压系统技术数据的表示规范 |
(Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery) |
BS 6143-1-1992 |
质量经济学指南.工艺过程成本模型 |
(Guide to the economics of quality - Process cost model) |
BS 6143-2-1990 |
质量经济学导则.预防、评估和失效模式 |
(Guide to the economics of quality - Prevention, appraisal and failure model) |
BS 6144-1990 |
非排放式热水供应系统用的采用内隔膜的膨胀器规范 |
(Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems) |
BS 6147-1989 |
铁矿石体积密度的试验方法.第2部分:最大粒度超过40mm的铁矿石样品体积密度的测定方法 |
(Methods for determination of bulk density of iron ores) |
BS 6148-8-1981 |
商业用冷藏柜试验方法.第8部分:意外机械接触试验 |
(Methods of test for commercial refrigerated cabinets - Test for accidental mechanical contact) |
BS 615-1953 |
凯氏量瓶规范 |
(Specification for Kohlrausch flasks) |
BS 6150-1991 |
建筑物涂料实用规程 |
(Code of practice for painting of buildings) |
BS 6155-1990 |
大牲畜兽医麻醉用气管插管规范 |
(Specification for tracheal tubes for large animals in veterinary anaesthesia) |
BS 6156-1981 |
采用氟化处理过的碳氢聚合物绝缘的低频微型设备用单芯或多芯单股线规范 |
(Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single) |
BS 6160-1-1989 |
移动通信用无线电设备.第1部分:一般要求和测试条件 |
(Radio equipment used in mobile services - General requirements and conditions of measurement) |
BS 6160-3-1990 |
移动通信用无线电设备.第3部分:A3E或F3E发射的接收机的测量方法 |
(Radio equipment used in mobile services - Methods of measurement for receivers for A3E or F3E emissions) |
BS 6160-4-1981 |
移动通信用无线电设备.第4部分:使用单边带发射的发射机(A3A,A3H或A3J) |
(Radio equipment used in mobile services - Transmitters employing single-sideband emissions (A3A, A3H or A3J)) |
BS 6160-5-1989 |
移动通信用无线电设备.第5部分:使用单边带技术(R3E,H3E或J3E)接收机的测试方法 |
(Radio equipment used in mobile services - Methods of measurement for receivers employing single-sideband techniques (R3E, H3E or J3E)) |
BS 6160-8-1994 |
移动设备中使用的无线电设备.天线的测量方法 |
(Radio equipment used in mobile services - Methods of measurement for antennas) |
BS 6161-11-1985 |
铝及其合金的阳极氧化镀层的试验方法.第11部分:用光电反射计测量全反射 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys - Measurement of total reflectance using a photoelectric reflectometer) |
BS 6161-14-1987 |
铝及其合金的阳极氧化镀层的试验方法.第14部分:红外反射率的测定 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of infra-red reflectance) |
BS 6161-18-1991 |
铝及其合金的阳极氧化镀层的试验方法.表面耐磨强度的测定 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of surface abrasion resistance) |
BS 6161-1993 |
铝及其合金的阳极氧化镀层的试验方法.第19部分:图象清晰度的测定.仪器测定法 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of image clarity. Instrumental method) |
BS 6161-7-1984 |
铝及其合金的阳极氧化镀层的试验方法.第7部分:使用人造光的阳极氧化有色涂层的耐光度的加速测定法 |
(Methods of test for anodic oxidation coatings on aluminium and its alloys - Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light) |
BS 6162-1981 |
聚烯烃类机纺纱线制开口袋规范 |
(Specification for open-mouth sacks manufactured from woven polyolefin tape yarn) |
BS 6164-2001 |
建筑业中开挖隧道的安全操作规程 |
(Code of practice for safety in tunnelling in the construction industry) |
BS 6165-2002 |
小型轻便喷雾灭火器规范 |
(Specification for small disposable fire extinguishers of the aerosol type) |
BS 6166-1-1986 |
升降装置.第1部分:额定值方法 |
(Lifting slings - Methods of rating) |
BS 6166-2-1986 |
升降装置.第2部分:标记 |
(Lifting slings - Specification for marking) |
BS 6166-3-1988 |
起重吊索.多用途起重吊索选择及安全指南 |
(Lifting slings - Guide to the selection and safe use of lifting slings for multi-purposes) |
BS 6168-1987 |
非金属齿轮规范 |
(Specification for non-metallic spur gears) |
BS 6169-1-1981 |
液态烃类体积测量方法.第1部分:置换流量计系统(配剂泵除外) |
(Methods for volumetric measurement of liquid hydrocarbons - Displacement meter systems (other than dispensing pumps)) |
BS 6169-2-1984 |
液态烃类体积测量方法.第2部分:浊度计系统或相对比重 |
(Methods for volumetric measurement of liquid hydrocarbons - Turbine meter systems) |
BS 6170-1981 |
亚麻帆布水桶规范 |
(Specification for flax canvas water buckets) |
BS 6172-1990 |
家用燃气烹调设备(1、2、3类家用燃气)安装规范 |
(Specification for installation of domestic gas cooking appliances (1st, 2nd and 3rd family gases)) |
BS 6172-2004 |
家用燃气烹调设备(2、3类家用燃气)的安装和维护.规范 |
|
BS 6173-2001 |
公共饮食业用各型燃气设备(2、3类家用燃气)安装规范 |
(Specification for installation of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)) |
BS 6174-1982 |
有电输出的差压传感器规范 |
(Specification for differential pressure transmitters with electrical outputs) |
BS 6177-1982 |
建筑物隔震用合成橡胶座的选择与使用指南 |
(Guide to selection and use of elastomeric bearings for vibration isolation of buildings) |
BS 6178-1-1990 |
小梁挂钩.第1部分:砌筑墙内的家用设施小梁挂钩规范 |
(Joist hangers - Specification for joist hangers for building into masonry walls of domestic dwellings) |
BS 6179-1982 |
一般用钨丝灯(寿命2000小时) |
(Specification for tungsten filament lamps for general service (with lives of 2000 h)) |
BS 6180-1999 |
建筑物内及附近用防护栅栏.实施规范 |
(Barriers in and about buildings - Code of practice) |
BS 6181-1981 |
建筑物内接合部的透气性的试验方法 |
(Method of test for air permeability of joints in building) |
BS 6182-1-1994 |
煤矿中使用的固有安全电源.第1部分:直流电源规范 |
(Intriniscally safe power supplies for use in coal mines - Specification for d.c. power supplies) |
BS 6182-2-1982 |
煤矿中使用的固有安全电源.第2部分:交流电源规范 |
(Intrinsically safe power supplies for use in coal mines - Specification for a.c. power supplies) |
BS 6182-3-1982 |
煤矿中使用的固有安全电源.第3部分:可再充电的蓄电池组规范 |
(Intrinsically safe power supplies for use in coal mines - Specification for rechargeable battery units) |
BS 6183-1-2000 |
打板球者的防护设备.一般要求 |
(Protective equipment for cricketers - General requirements) |
BS 6183-2-2000 |
打板球者的防护设备.生殖器防护装置 |
(Protective equipment for cricketers - Genital protectors) |
BS 6183-3-2000 |
打板球者的防护设备.击球员、捕手和守场员的腿保护装置及击球员的大腿、臂和胸腔保护装置 |
(Protective equipment for cricketers - Leg protectors for batsmen, wicket-keepers and fielders, and thigh, arm and chest protectors for batsmen) |
BS 6183-4-2001 |
板球者的防护设备.打球手套 |
(Protective equipment for cricketers - Gloves for batsmen) |
BS 6184-1981 |
仪器变压器中部分放电的测量方法 |
(Method for measuring partial discharges in instrument transformers) |
BS 6185-1982 |
男装尺寸标记规范 |
(Specification for size designation of men’s wear) |
BS 6186-1 Addendum No. 1-1993 |
直筒形渐开线花键规范:米制模数,侧配合.检验 |
(Specification for straight cylindrical involute splines: metric module, side fit - Inspection) |
BS 6186-1-1981 |
直筒形渐开线花键规范:米制模数、侧配合.尺寸和公差 |
(Specification for straight cylindrical involute splines: metric module, side fit - Dimensions and tolerances) |
BS 6187-2000 |
建筑物拆除实施规程 |
(Code of practice for demolition) |
BS 6189-1989 |
有关织物、纤维、纱线及工艺的术语词汇 |
(Glossary of terms relating to fabrics and associated fibres, yarns and processes) |
BS 6191-1-1981 |
邮件处理机械.第1部分:信件开封机的术语词汇 |
(Mail processing machines. Glossary of terms for letter opening machines) |
BS 6191-2-1981 |
邮件处理机械.第2部分:信件折叠机的术语词汇 |
(Mail processing machines. Glossary of terms for letter folding machines) |
BS 6191-3-1982 |
邮件处理机械.第3部分:姓名地址印写机术语词汇 |
(Mail processing machines. Glossary of terms for addressing machines) |
BS 6191-4-1984 |
邮件处理机械.第4部分:邮资盖销机技术规格中应包含的最起码内容 |
(Mail processing machines. Specification for minimum information to be included in specification sheets of postal franking machines) |
BS 6191-5-1985 |
邮件处理机械.第5部分:文件输入机的术语词汇 |
(Mail processing machines. Glossary of terms for document inserting machines) |
BS 6195-1993 |
线圈引接用绝缘软电缆及软线规范 |
(Specification for insulated flexible cables and cords for coil leads) |
BS 6196-1989 |
一次性使用的无菌硬膜外导管及导引器针头规范 |
(Specification for sterile epidural catheters and introducer needles for single use) |
BS 6197-1985 |
土方机械的保养与存放的方法 |
(Methods for preservation and storage of earth-moving machinery) |
BS 6199-1.2-1991 |
用称重及体积法测定密封管道中流体流量的方法.第1部分:称重法.第2节:检验静态称重装置的规程 |
(Measurement of liquid flow in closed conduits using weighing and volumetric methods - Weighing method - Procedures for checking static weighing systems) |
BS 6200-1-1991 |
铁、钢和其他黑色金属的抽样与分析法.第1部分:前言和目录 |
(Sampling and analysis of iron, steel and other ferrous metals - Introduction and contents) |
BS 6200-2.1-1993 |
铁、钢和其他黑色金属的抽样与分析法.第2部分:抽样和样品的制备.第1节:铁和钢的抽样和样品制备法 |
(Sampling and analysis of iron, steel and other ferrous metals - Sampling and sample preparation - Methods for iron and steel) |
BS 6200-2.2-1993 |
铁、钢和其它黑色金属的取样分析.第2部分:取样和样品制备.第2节:铁合金和其它合金添加剂用方法 |
(Sampling and analysis of iron, steel and other ferrous metals - Sampling and sample preparation - Methods for ferroalloys and other alloying additives) |
BS 6200-3.0-2002 |
铁、钢和其他有色金属的抽样和分析.分析方法.分析的参照方法.方法概述 |
(Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Reference methods of analysis - Summary of methods) |
BS 6200-3.1.1-1991 |
铁、钢和其他铁金属的抽样和分析.分析方法.铝的测定.钢、铸铁、低碳铬铁和铬金属:体积法 |
(Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Steel, cast iron, low carbon ferro-chromium and chromium metal: volumetric method) |
BS 6200-3.1.2-1991 |
铁、钢和其他铁金属抽样和分析.分析方法.铝的测定.钢和铸铁:分光光度分析法 |
(Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Steel and cast iron: spectrophotometric method) |