标准号 |
中文名称 |
英文名称 |
| BS 8204-6-2001 |
找平层、底基和原地地板材料.合成树脂地板材料.使用规则 |
(Screeds, bases and in-situ floorings - Synthetic resin floorings - Code of practice) |
| BS 8204-7-2003 |
找平层、底基和现场铺筑地板材料.可泵送自校平找平层.实施规范 |
(Screeds, bases and in-situ floorings - Pumpable self-smoothing screeds - Code of practice) |
| BS 8206-2-1992 |
建筑物的照明.第2部分:日光照明实用规程 |
(Lighting for buildings - Code of practice for daylighting) |
| BS 8207-1985 |
建筑物内能源效率实用规程 |
(Code of practice for energy efficiency in buildings) |
| BS 8208-1-1985 |
填隔热材料用外部空心墙适用性的评定导则.现存的传统空腔结构 |
(Guide to assessment of suitability of external cavity walls for filling with thermal insulants - Existing traditional cavity construction) |
| BS 8210-1986 |
建筑物的保养管理指南 |
(Guide to building maintenance management) |
| BS 8211-1-1988 |
住宅内的能源效率.第1部分:住宅翻修能源效率实用规程 |
(Energy efficiency in housing - Code of practice for energy efficient refurbishment of housing) |
| BS 8212-1995 |
采用石膏灰胶纸箱板的干垫板和隔墙板实用规程 |
(Code of practice for dry lining and partitioning using gypsum plasterboard) |
| BS 8213-1-1991 |
窗、门和天窗.使用和清洁门、窗时的安全实用规程(包括清洁材料和方法的指导) |
(Windows, doors and rooflights - Code of practice for safety in use and during cleaning of windows and doors (including guidance on cleaning materials and methods)) |
| BS 8213-1-2004 |
窗、门和天窗.窗户清洁(包括门窗和天窗)和使用时安全性的设计.实用规程 |
|
| BS 8213-1-2004 |
窗、门和天窗.窗户清洁(包括门窗和天窗)和使用时安全性的设计.实用规程 |
|
| BS 8213-4-1990 |
窗户门和天窗.第4部分:住房中换装窗和门具的实用规程 |
(Windows, doors and rooflights - Code of practice for the installation of replacement windows and doorsets in dwellings) |
| BS 8214-1990 |
非金属门扉防火门组件的实用规则 |
(Code of practice for fire door assemblies with non-metallic leaves) |
| BS 8215-1991 |
砖石工程施工的防潮层的设计和安装的实用规程 |
(Code of practice for design and installation of damp-proof courses in masonry construction) |
| BS 8216-1991 |
用于建筑物内隔热和吸声喷涂轻质矿物涂层的实用规程 |
(Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings) |
| BS 8217-1994 |
安装油毡层面操作规范 |
(Code of practice for built-up felt roofing) |
| BS 8218-1998 |
沥青砂胶屋顶的实施规程 |
(Code of practice for mastic asphalt roofing) |
| BS 8219-2001 |
薄板屋顶和墙面饰层的装配.成形纤维水泥.实施规程 |
(Installation of sheet roof and wall coverings - Profiled fibre cement - Code of practice) |
| BS 822-6-2004 |
电机和电器的终端标记.旋转电机的铅色 |
|
| BS 8220-1-2000 |
建筑物防盗安全导则.住房 |
(Guide for security of buildings against crime - Dwellings) |
| BS 8220-2-1995 |
建筑物防盗安全导则.办公室和商店 |
(Guide for security of buildings against crime - Offices and shops) |
| BS 8220-3-1990 |
建筑物防盗安全导则.总库和分库 |
(Guide for security of buildings against crime - Warehouses and distribution units) |
| BS 8220-3-2004 |
建筑物防盗安全导则.工业生产和配送用房屋存储设施 |
|
| BS 8221-1-2000 |
建筑物的清洁处理和表面检修的实施规范.自然石、砖、赤陶器和混凝土的清洁处理 |
(Code of practice for cleaning and surface repair of buildings - Cleaning of natural stones, brick, terracotta and concrete) |
| BS 8221-2-2000 |
建筑物的清洁处理和表面检修的实施规范.自然石、砖、赤陶器的表面检修 |
(Code of practice for cleaning and surface repair of buildings - Surface repair of natural stones, brick and terracotta) |
| BS 8233-1999 |
建筑物的隔音和噪声衰减.实施规范 |
(Sound insulation and noise reduction for buildings - Code of practice) |
| BS 826-1978 |
钢制螺栓连接的单层搁板(立式角型) |
(Specification for steel single tier bolted shelving (angle upright type)) |
| BS 8290-1-1992 |
吊顶棚.第1部分:设计的实用规程 |
(Suspended ceilings - Code of practice for design) |
| BS 8290-2-1992 |
吊顶棚.第2部分:件和组装件的性能规范 |
(Suspended ceilings - Specification for performance of components and assemblies) |
| BS 8290-3-1992 |
吊顶棚.第3部分:安装和保养的实用规程 |
(Suspended ceilings - Code of practice for installation and maintenance) |
| BS 8297-2000 |
无负荷预制混凝土护墙板安装和设计实施规程 |
(Code of practice for Design and installation of non-loadbearing precast concrete cladding) |
| BS 8298-1995 |
天然石覆面和衬砌的设计与安装的实用规程 |
(Code of practice for design and installation of natural stone cladding and lining) |
| BS 8300-2001 |
满足残疾人需求的建筑物及其通道的设计.实施规则 |
(Design of buildings and their approaches to meet the needs of disabled people - Code of practice) |
| BS 8303-1-1995 |
燃烧固体燃料的家用加热和厨房用具的安装.安装设计规范 |
(Installation of domestic heating and cooking appliances burning solid mineral fuels - Installation of domestic heating and cooking appliances burning solid mineral fuels - Specification for the design) |
| BS 8303-2-1995 |
燃烧固体燃料的家用加热和厨房用具的安装.现场安装和交付使用规范 |
(Installation of domestic heating and cooking appliances burning solid mineral fuels - Installation of domestic heating and cooking appliances buring solid mineral fuels - Specification for installing) |
| BS 8303-3-1995 |
现场安装设计推荐 |
(Installation of domestic heating and cooking appliances burning solid mineral fuels - Recommendations for design and on site installation) |
| BS 8313-1997 |
建筑物服务管道沟槽容纳空间的实用规程 |
(Code of practice for accommodation of building services in ducts) |
| BS 835-1973 |
重型石棉水泥烟道管及配件规范 |
(Specification for asbestos-cement flue pipes and fittings, heavy quality) |
| BS 84-1956 |
惠氏直螺纹规范 |
(Specification for parallel screw threads of Whitworth form) |
| BS 8401-2003 |
健康信息学标准.2001年7月的状况.指南 |
(Health informatics standards - Status as of July 2001 - Guide) |
| BS 8403-2002 |
在被控水上运动条件下救援伤员用水上运动脊柱状板规范 |
(Specification for aquatic spineboards for recovering casualties in controlled aquatic conditions) |
| BS 8404-2001 |
包装.防止儿童打开的包装.药品用不可再封装包装的要求和检验程序 |
(Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for pharmaceutical products) |
| BS 8405-2003 |
防高空坠落用隔热保护设备.自救或援救用单手操作的下降设备 |
(Personal protective equipment against falls from a height - Descender devices - Single-hand operated descender devices for self or assisted rescue) |
| BS 8406-2003 |
事件管理及群众安全服务.实施规程 |
(Event stewarding and crowd safety services - Code of practice) |
| BS 8409-2002 |
柔软室内娱乐区域的实施规程 |
(Soft indoor play areas - Code of practice) |
| BS 8412-2004 |
作物保护设备.大田作物空间可变设施的应用系统的性能要求.规范 |
|
| BS 8414-1-2002 |
外部镶面系统的防火性能.建筑物面墙用非承重外部镶面系统的试验方法 |
(Fire performance of external cladding systems - Test methods for non-loadbearing external cladding systems applied to the face of a building) |
| BS 8414-2-2005 |
外部镶面系统的防火性能.结构钢架支撑并适用的非承重外部镶面系统的试验方法 |
|
| BS 8416-2002 |
(锯孔用的)孔锯规范 |
(Specification for hole-saws) |
| BS 8417-2003 |
木材防腐的推荐规范 |
(Preservation of timber - Recommendations) |
| BS 8418-2003 |
运行中的CCTV系统探测器的安装和遥控监测.实施规程 |
(Installation and remote monitoring of detector activated CCTV systems - Code of practice) |
| BS 842-1965 |
交流电压控制的接地保护断路器规范 |
(Specification for a.c. voltage-operated earth-leakage circuit breakers) |
| BS 8420-2003 |
用直尺和楔形尺测量道路、人行道和其他铺砌区路面不规则度的方法 |
(Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges) |
| BS 8421-1-2003 |
医疗卫生信息学指南.健康护理的结果.传递给最终用户.通用指南和推荐规范 |
(Guide to health informatics - Results of healthcare service procedures - Delivery to end-users - General guidance and recommendations) |
| BS 8422-2003 |
力的测量.应变仪负荷传感器系统.校准方法 |
(Force measurement - Strain gauge load cell systems - Calibration method) |
| BS 8423-2002 |
民用生火和加热装置的火灾防护装置.规范 |
(Fireguards for fires and heating appliances for domestic use - Specification) |
| BS 8424-2004 |
建筑五金.拉柄.要求和试验方法 |
|
| BS 8425-2003 |
多层压合楼面覆面层的安装实施规程 |
(Code of practice for installation of laminate floor coverings) |
| BS 8426-2003 |
电子学习系统中电子支持的实施规程 |
(A code of practice for e-support in e-learning systems) |
| BS 8427-2004 |
水壶水过滤系统.规范 |
|
| BS 8428-2004 |
防护服.液体化学物质的防护.事故抢救队用在服装不同部位有液密连接的化学防护服的性能要求(3-ET型设备) |
|
| BS 8432-2005 |
脊髓正长石.设计指南 |
|
| BS 8433-2004 |
小型微波加热器.规范 |
|
| BS 8434-1-2003 |
电缆着火完整性评定的试验方法.应急电路中使用的无防护型小型电缆的试验.BS EN 50200外加喷水器 |
(Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN 50200 with addition of water spray) |
| BS 8434-2-2003 |
电缆着火完整性评定的试验方法.应急电路中使用的无防护型小型电缆的试验.BS EN 50200外加930鳦火焰和喷水器 |
(Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN 50200 with a 930 鳦 flame and with water spray) |
| BS 8436-2004 |
电缆.墙、隔墙和建筑物空间中使用的着火时有低排烟量和腐蚀气体释放的300/500V屏蔽电缆.多芯电缆 |
|
| BS 8436-2004 |
电缆.墙、隔墙和建筑物空间中使用的着火时有低排烟量和腐蚀气体释放的300/500V屏蔽电缆.多芯电缆 |
|
| BS 8438-2004 |
槽形皮带输送机.规范 |
|
| BS 8440-1-2005 |
健康信息学.医学数字图象.轮廓格式.一般原则 |
|
| BS 8440-2-2005 |
健康信息学.医学数字图象.轮廓格式.数据轮廓的特殊要求 |
|
| BS 8444-3-1996 |
事故管理.技术设备的事故分析指南 |
(Risk management - Guide to risk analysis of technological systems) |
| BS 845-1-1987 |
蒸汽、热水和高温传热流体用锅炉热性能的估算方法.第1部分:简明方法 |
(Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids - Concise procedure) |
| BS 845-2-1987 |
蒸汽、热水和高温传热流体用锅炉热性能的估算方法.第2部分:综合方法 |
(Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids - Comprehensive procedure) |
| BS 8451-2004 |
气焊切割和相关工艺用橡胶软管.高度耐扭结重型焊接软管(H型).规范 |
|
| BS 8456-2005 |
定向测音器抽空系统的设计和安装实施规程 |
|
| BS 846-1985 |
滴定管规范 |
(Specification for burettes) |
| BS 8461-2005 |
足球球门.采购、安装、维修、储存和检查的实施规范 |
|
| BS 8462-2005 |
青少年足球、futsal、微型足球和小场足球用球门.规范 |
|
| BS 848-1-1997 |
一般用风扇.第1部分:使用标准通风口对风扇的性能试验 |
(Fans for general purposes - Performance testing using standardized airways) |
| BS 848-10-1999 |
一般用途风扇.射流风扇性能试验 |
(Fans for general purposes - Performance testing of jet fans) |
| BS 848-2.4-2004 |
工业用风扇.标准化实验室条件下的风扇声功率级的测定.声强法 |
|
| BS 848-2.6-2000 |
通用风扇.噪声试验方法.小型空气推动装置排放的空气噪声 |
(Fans for general purposes - Methods of noise testing - Airborne noise emitted by small air-moving devices) |
| BS 848-3-2001 |
一般用途风扇.现场性能测试 |
(Fans for general purposes - Performance testing in situ) |
| BS 848-4-1997 |
通用电扇尺寸 |
(Fans for general purposes - Dimensions) |
| BS 848-5-1999 |
一般用途风扇.机械安全专用(保护) |
(Fans for general purposes - Special for mechanical safety (guarding)) |
| BS 848-7-2003 |
通用风扇.平衡和振动规范 |
(Fans for general purposes - Specifications for balancing and vibration) |
| BS 848-8-1999 |
一般用途风扇.范畴定义和词汇 |
(Fans for general purposes - Vocabulary and definition of categories) |
| BS 8500-1-2002 |
水泥.对BS EN 206-1补充的英国标准:拟定规范的方法和分类符指南 |
(Concrete - Complementary British Standard to BS EN 206-1: Method of specifying and guidance for the specifier) |
| BS 8500-2-2002 |
水泥.对BS EN 206-1补充的英国标准:组成材料和水泥规范 |
(Concrete - Complementary British Standard to BS EN 206-1: Specification for constituent materials and concrete) |
| BS 8501-2002 |
图形符号和标志.公共信息符号 |
(Graphical symbols and signs - Public information symbols) |
| BS 8502-2003 |
图形符号和标志.公共信息符号的创作和设计.要求 |
(Graphical symbols and signs - Creation and design of public information symbols - Requirements) |
| BS 852-1939 |
刃口平尺规范 |
(Specification for toolmakers’ straightedges) |
| BS 853-1-1990 |
用于加热系统的容器规范.中心供热和热水供应储水容器热风机 |
(Specification for vessels for use in heating systems - Calorifiers and storage vessels for central heating and hot water supply) |
| BS 853-2-1996 |
集中供暖系统用压力容器规范.第2部分:建筑业和工业设施用管式热交换器和蓄热器 |
(Specification for vessels for use in heating systems - Tubular heat exchangers and storage vessels for building and industrial services) |
| BS 8555-2003 |
环境管理系统.包括使用环境性能评估、分阶段实施环境管理系统的指南 |
(Environmental management systems - Guide to the phased implementation of an environmental management system including the use of environmental performance evaluation) |
| BS 856-1969 |
蝶形螺母规范 |
(Specification for wing nuts) |
| BS 857-1967 |
陆路运输用安全玻璃规范 |
(Specification for safety glass for land transport) |
| BS 8600-1999 |
投诉管理系统.设计和应用指南 |
(Complaints management systems - Guide to design and implementation) |
| BS 8621-2004 |
防盗锁部件.无钥匙出口 |
|
| BS 864-3-1975 |
铜和铜合金制毛细管与承压管配件.第3部分:聚乙烯管用承压配件 |
(Capillary and compression tube fittings of copper and copper alloy - Compression fittings for polyethylene pipes) |
| BS 8666-2000 |
混凝土钢筋的工序、尺寸选定、弯曲和切削规范 |
(Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete) |
| BS 8666-2005 |
混凝土钢筋的工序、尺寸选定、弯曲和切削.规范 |
|
| BS 869-1978 |
刃口平台和高精度划线平台板规范 |
(Specification for toolmakers’ flats and high precision surface plates) |
| BS 870-1950 |
外径千分尺规范 |
(Specification for external micrometers) |
| BS 871-1981 |
砂纸和砂布规范 |
(Specification for abrasive papers and cloths) |
| BS 8726-1-2002 |
矩形和方型线材和棒材制作的柱形螺旋式弹簧.计算和设计指南.压缩弹簧 |
(Cylindrical helical springs made from rectangular and square section wire and bar - Guide to calculation and design - Compression springs) |
| BS 8726-2-2002 |
矩形和方型线材和棒材制作的柱形螺旋式弹簧.计算和设计指南.扭力弹簧 |
(Cylindrical helical springs made from rectangular and square section wire and bar - Guide to calculation and design - Torsion springs) |
| BS 873-1-1983 |
道路交通标志和内部照明的桩柱.第1部分:试验方法 |
(Road traffic signs and internally illuminated bollards - Methods of test) |
| BS 873-2-1984 |
道路交通标志和内部照明的桩柱.第2部分:各种标志规范 |
(Road traffic signs and internally illuminated bollards - Specification for miscellaneous signs) |
| BS 873-3-1980 |
道路交通标志和内部照明的桩柱.第3部分:内部照明桩柱规范 |
(Road traffic signs and internally illuminated bollards - Specification for internally illuminated bollards) |
| BS 873-5-1983 |
道路交通标志和内部照明的桩柱.第5部分:内部照明标志和外部照明灯具规范 |
(Road traffic signs and internally illuminated bollards - Specification for internally illuminated signs and external lighting luminaires) |
| BS 873-6-1983 |
道路交通标志和内部照明的桩柱.第6部分:反光标志和不反光标志规范 |
(Road traffic signs and internally illuminated bollards - Specification for retroreflective and non-retroreflective signs) |
| BS 873-7-1984 |
道路交通标志和内部照明的桩柱.第7部分:标杆和配件规范 |
(Road traffic signs and internally illuminated bollards - Specification for posts and fittings) |
| BS 873-8-1986 |
道路交通标志和内部照明的桩柱.第8部分:锥形和圆柱体交通路标规范 |
(Road traffic signs and internally illuminated bollards - Specification for traffic cones and cylinders) |
| BS 874-1-1986 |
热绝缘性能测定方法.第1部分:测量的概述.定义和原理 |
(Methods for determining thermal insulating properties - Introduction, definitions and principles of measurement) |
| BS 874-3.1-1987 |
热绝缘性能测定方法.第3部分:热传递系数和导热性试验.第1节:保护热箱法 |
(Methods for determining thermal insulating properties - Tests for thermal transmittance and conductance - Guarded hot-box method) |
| BS 874-3.2-1990 |
热绝缘性能测定方法.热传递系数和导热性试验.第2节:校准热箱法 |
(Methods for determining thermal insulating properties - Tests for thermal transmittance and conductance - Calibrated hot-box method) |
| BS 876-1995 |
手锤规范 |
(Specification for hand hammers) |
| BS 8766-2004 |
个人和组别用姓名和标识符.相互操作用数据结构.规范 |
|
| BS 879-1-1985 |
水井套管.第1部分:井套管用钢管规范 |
(Water well casing - Specification for steel tubes for casing) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com