标准号 |
中文名称 |
英文名称 |
DIN 50450-3-1991 |
半导体工艺材料的检验.载运气体和混合气体中杂质的测定.用火焰电离检验测器测定.氢.氧.氮.氩.氦中的甲烷杂 |
(Testing of materials for semiconductor technology; determination of impurities in carrier gases and doping gases; determination of methane impurity in H, O, N, Ar and He by using a flame ionization detector (FID)) |
DIN 50450-4-1993 |
半导体工艺材料的检验.载运气体和混合气体中杂质的测定.用气体色谱法测定氮气中C1C3碳氢化合物 |
(Testing of materials for semiconductor technology; determination of impurities in carrier gases and dopant gases; determination of C-C-hydrocarbons in nitrogen by gas-chromatography) |
DIN 50450-5-1994 |
半导体工艺材料的检验.载气和掺杂气体中杂质的测定.用五氧化二磷件测定气相氯化氢中的微量水 |
(Testing of materials for semiconductor technology; determination of impurities in carrier gases and dopant gases; determination of water traces in gaseous hydrogen chloride by a diphosphorus pentoxide cell) |
DIN 50450-6-1994 |
半导体工艺材料的检验.载气和掺杂气体中杂质的测定.用气体色谱法和火焰电离探测器测定氮气中CO和CO2 |
(Testing of materials for semiconductor technology; determination of impurities in carrier gases and doping gases; determination of CO and CO in nitrogen by gaschromatographie) |
DIN 50450-7-1995 |
半导体工艺材料的检验.载气和掺杂气体中杂质的测定.第7部分:用气体色谱法和还原气体探测器测定氮气中CO和H2 |
(Testing of materials for semiconductor technology - Determination of impurities in carrier gases and dopant gases - Part 7: Determination of CO and H in nitrogen by gaschromatography and reduction gasdetector) |
DIN 50450-8-2000 |
半导体工艺材料的检验.载气和掺杂气体中杂质的测定.第8部分:用激光粒子计数器测定流动氮中粒子数的浓度 |
(Testing of materials for semiconductor technology - Determination of impurities in carrier gases and dopant gases - Part 8: Determination of the concentration of the particle number in flowing nitrogen using laser particle counter) |
DIN 50450-9-2003 |
半导体工艺材料的检验.载气和掺杂气体中杂质的测定.第9部分:用气相色谱法测定气态氯化氢中氧、氮、一氧化碳 |
(Testing of materials for semiconductor technology - Determination of impurities in carrier gases and dopant gases - Part 9: Determination of oxygen, nitrogen, carbonmonoxide, carbondioxide, hydrogen and C-C-hydrocarbons in gaseous hydrogen chloride by ga |
DIN 50451-1-2003 |
半导体工艺用材料检验.液体中痕量素的测定.用原子吸收光谱测定法测定硝酸溶剂内的银、金、钙、铜、铁、钾 |
(Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 1: Silver (Ag), gold (Au), calcium (Ca), copper (Cu), iron (Fe), potassium (K) and sodium (Na) in nitric acid by AAS) |
DIN 50451-2-2003 |
半导体工艺用材料的检验.液体中痕量素的测定.第2部分:用等离子感应的发射分光光度测定法测定氢氟酸中的钴 |
(Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 2: Calcium (Ca), cobalt (Co), chromium (Cr), copper (Cu), Iron (Fe), nickel (Ni) and zinc (Zn) in hydrofluoric acid with plasma-induced emission spectro |
DIN 50451-3-2003 |
半导体工艺用材料的检验.液体中痕量素的测定.第3部分:用电感耦合等离子体质谱法测定硝酸中铝(AL)、钴(Co) |
(Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Aluminium (Al), cobalt (Co), copper (Cu), sodium (Na), nickel (Ni) and zinc (Zn) in nitric acid by ICP-MS) |
DIN 50452-2-1991 |
半导体工艺材料的检验.液体中颗粒分析方法.用光学粒子计数器测定颗粒 |
(Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters) |
DIN 50452-3-1995 |
半导体工艺材料的检验.液体中颗粒分析方法.第3部分:光学粒子计数器校正 |
(Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 3: Calibration of optical particle counters) |
DIN 50453-1-1990 |
半导体工艺材料的检验.蚀刻混合剂浸蚀率的测定.单晶硅.测重法 |
(Testing of materials for semiconductor technology; determination of etch rates of etching mixtures; silicium monocrystals; gravimetric method) |
DIN 50453-2-1990 |
半导体工艺材料的检验.蚀刻混合剂浸蚀率的测定.二氧化硅涂层.光学法 |
(Testing of materials for semiconductor technology; determination of etch rates of etching mixtures; silicium-dioxid coating; optical method) |
DIN 50453-3-2001 |
半导体工艺材料的试验.蚀刻混合剂浸蚀率的测定.第3部分:铝.测重法 |
(Testing of materials for semiconductor technology - Determination of etch rates of etching mixtures - Part 3: Aluminium, gravimetric method) |
DIN 50454-1-2000 |
半导体工艺材料的检验.Ⅲ-Ⅴ化合物半导体单晶中错位的测定.第1部分:砷化镓 |
(Testing of materials for semiconductor technology - Determination of dislocations in monocrystals of III-V-compound semi-conductors - Part 1: Gallium arsenide) |
DIN 50454-2-1994 |
半导体工艺材料的检验.Ⅲ-Ⅴ化合物半导体单晶中错位腐蚀班点密度的测定.第2部分:铟磷化物 |
(Testing of materials for semiconductor technology - Determination of the dislocation etch pits density in monocrystals of III-V-compound semiconductors - Part 2: Indium phosphide) |
DIN 50454-3-1994 |
半导体工艺材料的检验.Ⅲ-Ⅴ化合物半导体单晶中错位腐蚀班点密度的测定.第3部分:镓磷化物 |
(Testing of materials for semiconductor technology - Determination of the dislocation etch pits density in monocrystals of III-V-compound semiconductors - Part 3: Gallium phosphide) |
DIN 50455-1-1991 |
半导体工艺材料的检验.表示光敏抗蚀剂特性的方法.用光学测量法测定层厚 |
(Testing of materials for semiconductor technology; methods for characterizing photoresists; determination of coating thickness with optical methods) |
DIN 50455-2-1999 |
半导体工艺材料的检验.光致抗蚀剂表示特性的方法.第2部分:正极光致抗蚀剂的光敏度的测定 |
(Testing of materials for semiconductor technology - Methods for the characterisation photoresists - Part 2: Determination of photosensitivity of positive photoresists) |
DIN 50456-2-1995 |
半导体工艺材料的试验.电子件用模压材料的特性表示法.第2部分:用压力萃取法测定电离子杂质 |
(Testing of materials for semiconductor technology - Method for the characterisation of moulding compounds for electronic components - Part 2: Determination of ionic impurities using pressure cooker test) |
DIN 50456-3-1999 |
半导体工艺材料的检验.电子件外封装用压制材料的特性表示法.第3部分:阳离子杂质的测定 |
(Testing of materials for semiconductor technology - Method for the characterisation of moulding compounds for electronic components - Part 3: Determination of cationic impurities) |
DIN 50457-1-1999 |
半导体工艺材料的试验.用湿式化学法测定添加气体混合剂中成份的体积构成.第1部分:氢-乙硼烷混合物中的乙硼 |
(Testing of materials for semiconductor technology - Determination of the volume fraction of components in dopant gas mixtures by wet-chemical methods - Part 1: Diborane in hydrogen diborane mixtures) |
DIN 50457-2-1999 |
半导体工艺材料的试验.用湿式化学法测定添加气体混合剂中成份的体积构成.第2部分:氮-磷混合物中的磷 |
(Testing of materials for semiconductor technology - Determination of the volume fraction of components in dopant gas mixtures by wet-chemical methods - Part 2: Phosphine in nitrogen phosphine mixtures) |
DIN 5046-1983 |
肉和其它食品用悬钩.S钩 |
(Hooks for meat and other foods; S-hook) |
DIN 50460-1988 |
钢材的检验.在交变磁场中测定电工网片的磁性.概述.概念.检验方法的依据 |
(Determination of magnetic properties of soft magnetic materials; general, terminology and principles of measurement) |
DIN 50463-1985 |
钢的检验.硅铁合金制硅钢片厚度的测定 |
(Testing of steel; determination of the density of iron/silicon alloy magnetic sheet) |
DIN 5047-1983 |
肉和其它食品用悬钩.管轨-滑动钩 |
(Hooks for meat and other food; tubular track sliding hook) |
DIN 50470-1980 |
永磁材料的检验.测定单磁轭的退磁曲线和永磁导磁率.电感应法 |
(Testing of permanent magnet materials; Determination of the demagnetization curve and permanent permeability in a yoke; Inductive method) |
DIN 50472-1981 |
永久磁铁的检验.在工作范围内测定磁通量 |
(Testing of permanent magnets; determination of the magnetic flux values in the working range) |
DIN 5048-1984 |
肉和其它食品用悬钩.管轨-滚钩 |
(Hooks for meat and other food; tubular track roller hook) |
DIN 505-1973 |
传动件.用两个螺钉紧固的带盖轴承和轴承套 |
(Driving components; cap-bearings; split-bearings; fastened with 2 screws) |
DIN 505-2004 |
传动件.用两个螺钉紧固的带盖轴承和无盖轴承 |
|
DIN 5050-1-1992 |
日光浴室和室内太阳灯.测量方法.型号分类.标志 |
(Solariums and domestic sun lamps; measuring, marking, classification) |
DIN 5050-2-1998 |
日光照射和室内太阳灯.第2部分:使用和运转 |
(Solariums and domestic sun lamps - Part 2: Application and operation) |
DIN 50502-1998 |
铜和铜含量的化学分析.含量至少为99.90%的非合金铜中铜含量的测定 |
(Chemical analysis of copper and copper alloys - Determination of copper in unalloyed copper containing not less than 99,90 % of copper) |
DIN 50503-1998 |
铜和铜合金的化学分析.铜塑性合金和铜铸合金中铜含量的测定 |
(Chemical analysis of copper and copper alloys - Determination of copper in wrought and cast copper alloys) |
DIN 50504-1973 |
铜和铜合金的化学分析.含铁量最高为0.4%的铜和铜使金中的铁的测定.光度法 |
(Chemical analysis of copper and copper alloys; photometric determination of iron in copper and copper alloys containing 0,4 % of iron at maximum) |
DIN 50505-1973 |
铜和铜合金的化学分析.用光测法测定含锰量最高为6%的铜合金中的锰 |
(Chemical analysis for copper and copper alloys; photometric determination of manganese in copper alloys containing 6 % of manganese at maximum) |
DIN 50506-1973 |
铜和铜合金的化学分析.含镍量最高为2.5%的铜合金中的镍的测定.光度法 |
(Chemical analysis of copper and copper alloys; photometric determination of nickel in copper alloys containing 2,5 % of nickel at maximum) |
DIN 50507-1977 |
铜和铜合金的化学分析.铅含量的测定.萃取滴定法 |
(Chemical analysis of copper and copper alloys; determination of lead, extracting-titration method) |
DIN 50508-1977 |
铜和铜合金的化学分析.合金素锡的测定.容量分析法 |
(Chemical analysis of copper and copper alloys; determination of tin as alloying element, volumetric method) |
DIN 50509-1977 |
铜和铜合金的化学分析.用容量分析法测定铜合金中的铝含量 |
(Chemical analysis of copper and copper alloys; determination of the aluminium content of copper alloys, volumetric method) |
DIN 50510-1980 |
铜和铜合金的化学分析.用光度测定法测定铜和铜塑性合金中的砷含量 |
(Chemical analysis of copper and copper alloys; determination of arsenic in copper and copper alloys, photometric method) |
DIN 50550-1985 |
锌和锌合金.用原子吸收光谱法测定铟和铊的含量 |
(Zinc and zinc alloys; determination of indium and thallium by atomic absorption spectrometry) |
DIN 5059-1-1992 |
包装材料.金属和塑料软管.金属软管.管颈.管肩 |
(Packaging; metal and plastic tubes; metal tubes; tube nozzles, tube shoulders) |
DIN 5059-2-1990 |
包装材料.金属和塑料软管.塑料软管.软管嘴 |
(Packaging; metal and plastic tubes; plastic tubes; tube nozzles) |
DIN 506-1973 |
传动件.用四个螺钉紧固的带盖轴承和轴承套 |
(Driving components; cap-bearings; split-bearings; fastened with 4 screws) |
DIN 506-2004 |
传动件.用四个螺钉紧固的带盖轴承和无盖轴承 |
|
DIN 5060-1985 |
包装材料.管壳封口端 |
(Means of packaging; closures for tube ends) |
DIN 50600-1980 |
金属材料的检验.金相结构图.图象尺寸及幅面 |
(Testing of metallic materials; Metallographic Micrographs; Picture scales and formats) |
DIN 50601-1985 |
金相检验方法.钢和铁材料的纯铁体和奥氏体粒度的测定 |
(Metallographic examination; determination of the ferritic or austenitic grain size of steel and ferrous materials) |
DIN 50602-1985 |
金相检验方法.用相图对优质钢中的非金属杂质作显微镜检查 |
(Metallographic examination; microscopic examination of special steels using standard diagrams to assess the content of non-metallic inclusions) |
DIN 5065-1987 |
包装材料.金属及塑料软管用塑料封口端 |
(Packaging; plastic closures for metal and plastic tubes) |
DIN 5066-1980 |
包装辅助材料.装饰外罩.尺寸 |
(Auxiliary means of packaging; fancy caps, dimensions) |
DIN 5067-1998 |
包装容器.棱面圆型宽颈包装玻璃容器 |
(Means of packaging - Round wide-mouthed glass containers, with facets) |
DIN 5068-1998 |
包装容器.带凹沟的圆大口玻璃容器 |
(Means of packaging - Round wide-mouthed glass containers, with recessed grip) |
DIN 5079-1-1992 |
包装材料.圆柱形铝软管包装用硬纸板或瓦纸板盒子 |
(Packaging; boxes manufactured from solid fibre-board or corrugated board for cylindrical aluminium tubes) |
DIN 5079-2-1990 |
包装材料.锥型铝管包装用瓦愣纸板制折叠盒 |
(Packaging; folding boxes made of corrugated board for conical aluminium tubes) |
DIN 508-2002 |
T型槽用螺母 |
(Nuts for T-slots) |
DIN 5080-1978 |
家用罐头玻璃杯和玻璃瓶.橡胶密封环 |
(Preserving jars and bottles for domestic purposes; rubber seal rings) |
DIN 50898-2005 |
电镀覆层.有辅助处理的铝和铝合金的电镀覆层.要求和试验方法 |
|
DIN 509-1998 |
退刀槽.类型和尺寸 |
(Relief grooves - Types and dimensions) |
DIN 5090-1997 |
包装容器.包装瓶 |
(Means of packaging - Bottles for packaging) |
DIN 50900-2-2002 |
金属的腐蚀.术语.第2部分:电化学术语 |
(Corrosion of metals - Terms - Part 2: Electrochemical terms) |
DIN 50902-1994 |
金属防腐层.概念.方法.表面准备 |
(Coatings for corrosion protection of metals; vocabulary, processes and surface preparation) |
DIN 50903-1967 |
金属涂层.气孔夹杂.气泡与裂纹.概念 |
(Metallic Coatings; Pores, Inclusions, Blisters and Cracks, Definitions) |
DIN 50905-1-1987 |
金属腐蚀.腐蚀检查.原则 |
(Corrosion of metals; corrosion testing; principles) |
DIN 50905-2-1987 |
金属腐蚀.腐蚀检查.均匀平面腐蚀的腐蚀量 |
(Corrosion of metals; corrosion testing; corrosion characteristics under uniform corrosion attack) |
DIN 50905-3-1987 |
金属腐蚀.腐蚀检查.无机械负荷的不均匀及局部腐蚀的腐蚀量 |
(Corrosion of metals; corrosion testing; corrosion characteristics under nonuniform and localized corrosion attack without mechanical stress) |
DIN 50905-4-1987 |
金属腐蚀.腐蚀检查.在实验室液体中无机械负荷的情况下进行化学腐蚀试验的方法 |
(Corrosion of metals; corrosion testing; corrosion testing in liquids under laboratory conditions without mechanical stress) |
DIN 50908-1993 |
锻铝合金耐应力裂缝腐蚀检验.H22 |
(Testing the resistance of aluminium wrought alloys to stress corrosion cracking) |
DIN 50915-1993 |
在含硝酸盐侵蚀剂中非合金钢和低合金钢耐晶间应力裂纹腐蚀公休检验.焊接和非焊接材料 |
(Testing the resistance of unalloyed and low alloy steels to intergranular stress corrosion cracking by attack of nitrate medium; welded and unwelded materials) |
DIN 50916-1-1976 |
铜合金的检验.用氨进行的应力裂纹腐蚀试验.管材.棒材和型材的检验 |
(Testing of copper alloys; stress corrosion cracking test in ammonia, testing of tubes, rods and profiles) |
DIN 50916-2-1985 |
铜合金的检验.用氨作应力裂缝腐蚀检验.构件的检验 |
(Testing of copper alloys; stress corrosion cracking test using ammonia; testing of components) |
DIN 50918-1978 |
金属的腐蚀.电化学腐蚀试验 |
(Corrosion of metals; electrochemical corrosion tests) |
DIN 50919-1984 |
金属的腐蚀.电解溶液里接触腐蚀的试验 |
(Corrosion of metal; investigations of galvanic corrosion in electrolytic solutions) |
DIN 50920-1-1985 |
金属的腐蚀.通电液体里的腐蚀试验.概况 |
(Corrosion of metals; corrosion testing in flowing liquids; general) |
DIN 50922-1985 |
金属的腐蚀.金属材料耐应力裂纹腐蚀性能的检验.概况 |
(Corrosion of metals; testing the resistance of metallic materials to stress corrosion cracking; general) |
DIN 50923-2004 |
电镀层.铁或钢上带有机涂层的锌或锌合金涂层的双涂层 |
|
DIN 50925-1992 |
金属腐蚀.敷设在地下的设备阴极防腐蚀作用的验证 |
(Corrosion of metals; proof of effectiveness of cathodic corrosion protection of underground installations) |
DIN 50926-1992 |
金属腐蚀.非合金钢制燃料油罐底部用外部电流的阴极防腐蚀 |
(Corrosion of metals; cathodic corrosion protection with impressed current of the bottom area of fuel oil tanks of unalloyed steel) |
DIN 50927-1985 |
对仪器.容器和管道内表面电化学防腐的计划与应用(内部防护) |
(Planning and application of electrochemical corrosion protection of internal surfaces of apparatus, containers and tubes (internal protection)) |
DIN 50928-1985 |
金属腐蚀.涂层金属材料在含水介质腐蚀下的防腐检验和评价 |
(Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents) |
DIN 50929-1-1985 |
金属腐蚀.在外部腐蚀条件下金属材料的腐蚀概率.总则 |
(Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; general) |
DIN 50929-2-1985 |
金属腐蚀.在外部腐蚀条件下金属材料的腐蚀概率.建筑物内部装备部分 |
(Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; service components inside buildings) |
DIN 50929-3-1985 |
金属腐蚀.在外部腐蚀条件下金属材料的腐蚀概率.在土壤和水中的管道和构件 |
(Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components) |
DIN 50930-1-1993 |
金属的腐蚀.由于管槽和装置内的水造成的内部金属腐蚀.概述 |
(Corrosion of metalls; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; generales) |
DIN 50930-2-1993 |
金属的腐蚀.由于管槽和装置内的水造成的内部金属腐蚀.非合金和低合金铁材料腐蚀可能性能判定 |
(Corrosion of metals; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; evaluation of the corrosion likelihood of unalloyed and low-alloy iron materials) |
DIN 50930-3-1993 |
金属的腐蚀.由于管槽和装置内的水造成的内部金属腐蚀.热镀锌铁材料腐蚀可能性判定 |
(Corrosion of metals; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; evaluation of the corrosion likelihood of hot dip iron materials) |
DIN 50930-4-1993 |
金属的腐蚀.由于管槽和装置内的水造成的内部金属腐蚀.不锈钢腐蚀可能性判定 |
(Corrosion of metals; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; evaluation of the corrosion likelihood of stainless steels) |
DIN 50930-5-1993 |
金属的腐蚀.由于管槽和装置内的水造成的内部金属腐蚀.铜和铜材腐蚀可能性判定 |
(Corrosion of metals; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; evaluation of the corrosion likelihood of copper and copper alloys) |
DIN 50930-6-2001 |
金属的腐蚀.由于管、槽和装置内的水造成的金属材料腐蚀.第6部分:饮用水成分的影响 |
(Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus - Part 6: Influence of the composition of drinking water) |
DIN 50931-1-1999 |
金属腐蚀.饮用水的腐蚀试验.第1部分:饮用水组分改变的试验 |
(Corrosion of metals - Corrosion tests of drinking water - Part 1: Testing of change of the composition of drinking water) |
DIN 50933-1987 |
涂层厚度测量.用带探测器的差动测量器测量涂层厚度 |
(Measurement of coating thickness by differential measurement using a stylus instrument) |
DIN 50934-1-2000 |
金属的腐蚀.水处理设备腐蚀防护效果的评价方法.第1部分:总则 |
(Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 1: General) |
DIN 50934-2-2000 |
金属的腐蚀.水处理设备腐蚀防护效果的评价方法.第2部分:饮用水减低腐蚀产品散发的设备 |
(Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 2: Apparatus for decreasing of emission of corrosion products to drinking water) |
DIN 50934-3-2000 |
金属的腐蚀.腐蚀防护用水处理仪器效果的评定方法.第3部分:结垢的水装置中清除腐蚀物的现场腐蚀试验 |
(Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 3: Field corrosion test for removal of corrosion products in incrusted water installations) |
DIN 50934-4-2000 |
金属的腐蚀.水处理设备腐蚀防护效果的评价方法.第4部分:在结水锈的水安装中腐蚀产品去除的试验室腐蚀试验 |
(Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 4: Laboratory corrosion test for removal of corrosion products in incrusted water installations) |
DIN 50938-2000 |
铁和钢的黑色氧化涂层.要求和试验方法 |
(Black oxide coatings on iron or steel - Requirements and test methods) |
DIN 50939-1996 |
防腐蚀.铝的铬酸钝化处理.规则和检验方法 |
(Corrosion protection - Chromating of aluminium - Principles and methods of test) |
DIN 50957-1978 |
电镀槽检验.用Hull电解槽的电镀检验.一般原则 |
(Testing of electrolytes used for electro-deposited metallic coatings; test involving electro-deposition of a coating in the Hull cell, general principles) |
DIN 50958-2001 |
电镀层.按改良的柯洛特考得(CORRODKOTE)法对镀铬物体进行的腐蚀检验 |
(Electroplated coatings - Modified Corrodkote corrosion test (mod. Corr-Test)) |
DIN 50959-1982 |
电镀层.铁材料上的电镀层在各种气候条件下的腐蚀状况说明 |
(Electrodeposited coatings; corrosive resistance of electrodeposited coatings on iron and steel under different climatic conditions) |
DIN 50960-1-1998 |
电镀层.技术资料中的标记 |
(Electroplated coatings - Designation in technical documents) |
DIN 50960-2-1998 |
电镀涂层.第2部分:图纸说明 |
(Electroplated coatings - Part 2: Indications on technical drawings) |
DIN 50961-2000 |
电镀层.钢铁材料上镀锌层.术语、试验和防腐蚀 |
(Electroplated coatings - Zinc coatings on iron and steel - Terms, testing and corrosion resistance) |
DIN 50962-1998 |
电镀涂层.铁制工件上铬酸钝化锌合金涂层 |
(Electrodeposited coatings - Chromated coatings of zinc alloys on iron and steel) |
DIN 50965-2000 |
电镀层.钢铁和铜及铜合金上的锡镀层 |
(Electroplated coatings - Tin-coatings on iron steel and on copper and copper alloys) |
DIN 50966-1988 |
电镀层.工程用金属面上自动催化分离的镍.磷镀层 |
(Electroplated coatings; autocatalytic nickel-phosphorus coatings on metal in technical applications) |
DIN 50967-2005 |
金属镀层.铝及铝合金上的镍和镍铬电镀层 |
|
DIN 50969-1990 |
高强度结构钢部件耐氢感应脆性断裂性.用支柱试验和预防性测量法进行检测 |
(Resistance of high-strength structural steel components against hydrogen-induced brittle fracture; detection by bracing test and preventive measures) |
DIN 5097-1999 |
包装辅助材料.瓶子上的夹塞 |
(Auxiliary packaging means - Clipclocks for bottles) |
DIN 50970-1995 |
电解镀层.镍浴用的镍盐.要求和检验 |
(Electroplated coatings - Nickel chemicals for nickel baths - Requirements and testing) |
DIN 50971-1996 |
电解镀层.氰化槽和/或硷化槽用化学材料.要求和检验 |
(Electroplated coatings - Chemicals for cyanic and/or alkaline electroplating baths - Requirements and testing) |
DIN 50972-1995 |
电解镀层.铜槽用的硫酸铜.要求和检验 |
(Electroplated coatings - Copper sulphate for copper baths - Requirements and testing) |
DIN 50973-1984 |
电解镀层.电镀槽用酸.要求 |
(Electroplated coatings; acids for electroplating; requirements) |
DIN 50977-1993 |
镀层厚度的测量.对连续运动的钢带金属镀层厚度的无接触测量 |
(Measurement of coating thickness; non contact measurement of coating thickness on continuously moving objects) |
DIN 50977-2005 |
测量覆层厚度.连续运动物体上覆层厚度的非接触测量 |
|
DIN 50978-1985 |
金属镀层的检验.热镀锌产生的涂层附着性能 |
(Testing of metallic coatings; adherence of hot-dip zinc coatings) |