标准号 |
中文名称 |
英文名称 |
| DIN 82101-1976 |
钩环 |
(Shackles) |
| DIN 82101-2005 |
提升、拖引、捆索用件.D形钩环.非合金优质钢 |
|
| DIN 82102-2005 |
提升、拖引、捆索用件.D形钩环.不锈钢 |
|
| DIN 82103-2005 |
提升、拖引、捆索用件.弓形钩环.不锈钢 |
|
| DIN 8221-1973 |
传动件.接DIN502.DIN503和DIN504的滑动轴承轴套 |
(Driving Elements; Bushes for Plain Bearings according to DIN 502, DIN 503 and DIN 504) |
| DIN 8221-2004 |
滑动轴承.符合DIN502、DIN503和DIN504的滑动轴承用轴套 |
|
| DIN 8230-1989 |
小型表.零件的名称 |
(Watches; nomenclature of watch parts) |
| DIN 8231-1989 |
小型表.附加装置的零件名称 |
(Watches; nomenclature of components of additional equipment) |
| DIN 82320-2004 |
船上空气调节和通风设备.技术规范 |
|
| DIN 82330-1998 |
船舶上的通风设备.圆法兰盘DN250至DN1800 |
(Ventilation plants on ships - Round flanges DN 250 to DN 1800) |
| DIN 82331-1998 |
船舶上的通风设备.符合DIN82330的圆法兰盘用平面密封垫 |
(Ventilation plants on ships - Gaskets for round flanges according to DIN 82330) |
| DIN 82332-1998 |
船舶上的通风设备.适配法兰 |
(Ventilation plants on ships - Adapter flanges) |
| DIN 8234-1987 |
小型表指针机件高度.公称尺寸 |
(Hight of motion work in watches; nominal dimensions) |
| DIN 82340-1999 |
船上的通风设备.鹅颈式管接头风扇 |
(Ventilation plants on ships - Gooseneck ventilators) |
| DIN 82341-1999 |
船舶通风设备.通风罩盖 |
(Ventilation plants on ships - Mushroom ventilaton heads) |
| DIN 82342-1999 |
船舶通风设备.通风设备排风口 |
(Ventilation plants on ships - Discharge ventilaton heads) |
| DIN 8235-1-1989 |
测时仪表的分类和结构.时钟种类 |
(Classification and design of time keeping instruments; terms of types of watches and clocks) |
| DIN 8235-2-1988 |
计时仪器的分类和结构.功能组和部件组分类 |
(Classification and design of time keeping instruments; synopsis based on functional groups) |
| DIN 8236-1-1970 |
时间测定的术语.指示.走时 |
(Chronometric Terms; Indication, Rate) |
| DIN 8236-2-1971 |
时间测定的术语.频率.周期 |
(Chronometric Terms; Frequency, Period) |
| DIN 8236-3-1971 |
时间测定的术语.频率.速率系数 |
(Chronometric Terms; Coefficients of the Rate) |
| DIN 8236-4-1975 |
时间测定的术语.钟表的检验方位 |
(Horological definitions; positions for control) |
| DIN 8236-5-1987 |
时间测定技术的概念.技术商业概念 |
(Horological definitions; technical commercial definitions) |
| DIN 8237-1982 |
小表壳的金镀层.要求.检验和标志 |
(Gold alloy coverings on watch cases; requirements, testing and marking) |
| DIN 824-1981 |
技术制图.按存放规格折叠 |
(Technical drawings; Folding to filing size) |
| DIN 8240-1-1974 |
小型钟表.钟表的形式与尺寸测量 |
(Watches; shapes and measurements of movements) |
| DIN 8240-2-1974 |
小型钟表.圆形表壳尺寸与直径 |
(Wrist watches; sizes and diameters of round movements) |
| DIN 8240-3-1986 |
小型钟表.表壳型号及主要尺寸 |
(Watches; sizes and main dimensions of movements) |
| DIN 8240-4-1987 |
小型钟表.圆形机件和成型件的调整轴位置 |
(Watches; position of setting stem for round and shaped movements) |
| DIN 8240-5-1987 |
小型钟表.表数码盘底脚孔 |
(Watches; footholes in plates for dials) |
| DIN 8242-3-1987 |
小型表的数码盘.验收的检验范围 |
(Dials for watches; acceptance test) |
| DIN 8242-4-1988 |
小型表的表盘.日历和日期用窗口.尺寸 |
(Dials for watches; section for day and date; dimensions) |
| DIN 8243-1969 |
精密仪器用一字槽圆柱头螺钉.M0.3至M1.4 |
(Slotted Cheese Head Screws for Fine Mechanics; M 0.3 to M 1.4) |
| DIN 8245-1972 |
精密仪器用一字槽沉头螺钉.M0.4至M1.4 |
(Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4) |
| DIN 8249-1-1977 |
小型表的指针.公称尺寸 |
(Hands for watches; nominal dimensions) |
| DIN 8249-2-1977 |
小型表的指针.指针孔和指针轴的极限尺寸 |
(Hands for watches; upper and lower deviations for holes and shafts) |
| DIN 8249-3-1977 |
小型表的指针.指针组的内孔配合 |
(Hands for watches; combinations of holes for sets of hands) |
| DIN 825-1996 |
铭牌.尺寸 |
(Plates, signs, labels - Dimensions) |
| DIN 825-2004 |
标志、铭牌和标签.尺寸 |
|
| DIN 8250-1973 |
精密机械用宝石.轴承螺钉 |
(Jewels for fine mechanics; bearing screws) |
| DIN 8253-4-1992 |
小型表用圆形玻璃表面.矿物玻璃.I型密封.尺寸 |
(Round glasses for watches; mineral glasses; I-gasket, dimensions) |
| DIN 8254-1974 |
小型表的防震器.主要尺寸.配合 |
(Shock-absorber for watches; main dimensions, fits) |
| DIN 8255-1-1972 |
小型钟表上用的圆形带槽的螺旋弹性套 |
(Collets for Watches and Clocks, Slotted, Round) |
| DIN 8256-1975 |
装在精密仪器上的轴承钻石.轴承钻石的分类和品种一览表.外文名称 |
(Jewels for fine mechanics; classification and types of jewels, survey table, nomenclature in foreign languages) |
| DIN 8257-1-1987 |
装在精密仪器的轴承钻石.钟表用扁平带眼钻石 |
(Jewels for fine mechanics; watch jewels, flat) |
| DIN 8257-2-1969 |
装在精密仪器上的轴承钻石.钟表用球面带孔钻石 |
(Jewels for fine mechanics; watch jewels, balance jewels) |
| DIN 8257-3-1987 |
装在精密仪器上的轴承钻石.钟表用平面平行的带眼钻石 |
(Jewels for fine mechanics; watch jewels, ring jewels) |
| DIN 8258-1969 |
装在精密仪器上的轴承钻石.钟表用托钻石 |
(Jewels for fine mechanics; cap jewels for watches) |
| DIN 8259-1965 |
钟表用椭圆宝石 |
(Impulse jewels for watches) |
| DIN 8260-1987 |
小型表的调整轴(发条轴).主要尺寸 |
(Setting stem (winding stem) for watches; main dimensions) |
| DIN 82602-1997 |
带基板的双柱系缆桩 |
(Double bollards with foundation plate) |
| DIN 82603-1997 |
带基板的双系留柱系缆桩 |
(Double riding bollards with foundation plate) |
| DIN 82604-1990 |
十字系缆桩 |
(Riding bollards) |
| DIN 82607-1995 |
双柱系缆桩 |
(Double bollards) |
| DIN 8261-1972 |
装在精密仪器上的轴承钻石.弧孔钻石 |
(Jewels for fine mechanics; V-jewels) |
| DIN 8262-1-1969 |
装在精密仪器上的轴承钻石.仪器上用平面直孔钻石 |
(Jewels for fine mechanics; jewels for instruments, flat) |
| DIN 8262-2-1969 |
装在精密仪器上的轴承钻石.仪器上用平面平行和凸起的带孔钻石 |
(Jewels for fine mechanics; jewels for instruments, ring jewels) |
| DIN 8263-1969 |
装在精密仪器上的轴承钻石.仪器上用平面托钻石 |
(Jewels for fine mechanics; cap jewels for instruments, flat) |
| DIN 8265-1-1987 |
小型表的外壳.表盘切口.表蒙 |
(Watch cases; openings for dial, dial overlapping) |
| DIN 8270-1-1988 |
大型钟表的指针.连接尺寸.配合.尺寸组合 |
(Hands for clocks; fitting dimensions, fits, combinations of dimensions) |
| DIN 8270-2-1987 |
大型钟表用指针.长度 |
(Hands for clocks; lengths) |
| DIN 8272-1982 |
钟表摆轮的平衡螺钉 |
(Balance-screws for watches and clocks) |
| DIN 8273-2-1982 |
钟表用无头平衡销 |
(Balance studs for watches and clocks; without head) |
| DIN 8274-1972 |
精密仪器的轴承钻石.电度表用半球形钻石 |
(Jewels for fine mechanics; jewels with concave shape for watthour-meters) |
| DIN 8275-1965 |
钟表擒纵叉瓦 |
(Pallets for watches) |
| DIN 8276-2-1972 |
大型钟表的圆形玻璃盖.带字盘的玻璃盖的连接尺寸 |
(Round bezels for clocks; with dial, fitting dimensions) |
| DIN 8279-1-1987 |
钟表用轴承套.扁平的 |
(Bearing bushes for watches and clocks, flat) |
| DIN 8279-2-1987 |
钟表用轴承套.凸型的 |
(Bearing bushes for watches and clocks, domed) |
| DIN 8283-1974 |
小型钟表的宝石衬套 |
(Jewelled bushings for watches) |
| DIN 8285-1978 |
大型钟表壳的中心紧固.圆柱头螺钉 |
(Central case-screw for clocks; cheese head screws) |
| DIN 8286-1970 |
测时计的轴端 |
(Shaft ends for timepieces) |
| DIN 8287-1983 |
主弹簧.概念.要求.检验 |
(Main springs; concepts, requirements, testing) |
| DIN 8289-1975 |
手表带.连接尺寸 |
(Bracelets for watches; fitting dimensions) |
| DIN 8291-1978 |
大型钟表的字盘.验收检验范围 |
(Dial-plates for clocks; acceptance test) |
| DIN 8293-1-1975 |
钟表的平衡摆轴.主要尺寸.名称 |
(Balance staffs for watches and clocks; main types, designations) |
| DIN 8293-2-1976 |
钟表的平衡摆轴.单平衡摆轴 |
(Balance staffs for watches and clocks; single balance staffs) |
| DIN 8294-1977 |
大型钟表的平衡摆轴.尖头轴 |
(Balance staffs for clocks; pointed staffs) |
| DIN 8296-1988 |
防水手表用冠状轴套 |
(Sleeves for crowns for water resistant wrist watches) |
| DIN 8297-1971 |
手表上的表柄 |
(Winding buttons for wrist-watches) |
| DIN 8298-1975 |
小型钟表上的推杆.主要尺寸.名称 |
(Push pieces for watches; main dimensions, terms) |
| DIN 8300-1971 |
鼓式和圆盘记录仪的传动.名称.要求.标记 |
(Movements for recording instruments; requirements, marking, designation) |
| DIN 8301-1987 |
大型钟表用外壳.验收的检验范围 |
(Cases for clocks; acceptance test) |
| DIN 8304-1989 |
钟表用游丝.特性标准号 |
(Hairsprings for watches and clocks; code-numbers) |
| DIN 8305-1972 |
小型钟表的耐冲击性.概念.要求.检验 |
(Jewels for watches and clocks; concepts, types) |
| DIN 8306-1983 |
潜水员用表.技术要求和检验 |
(Diver`s watches; safety requirements and testing) |
| DIN 8308-1981 |
小型钟表的耐冲击性.概念.要求.检验 |
(Shock protection of watches; definition, requirements, testing) |
| DIN 8309-1981 |
小型钟表的抗磁性能.概念.要求.检验 |
(Antimagnetic properties of watches; definition, requirements, testing) |
| DIN 8310-1984 |
小型钟表的防水性.概念.要求.检验 |
(Water resistance of watches; definition, requirements, testing) |
| DIN 83100-1-2002 |
重型船门.第1部分:防风雨(ISO型)、分类和交货技术条件 |
(Heavy hinged doors on ships - Part 1: Weathertight (ISO-type), classification, technical delivery conditions) |
| DIN 83100-11-2002 |
船用重型铰链门.第11部分:无防风雨的,分类和交货技术条件 |
(Heavy hinged doors on ships - Part 11: Non-weathertight, classification, technical delivery conditions) |
| DIN 83100-12-2002 |
船用重型铰链门.第12部分:无防风雨的,设计详细资料 |
(Heavy hinged doors on ships - Part 12: Non weathertight, design details) |
| DIN 83100-13-2002 |
船用重型铰链门.第13部分:无防风雨的,装置 |
(Heavy hinged doors on ships - Part 13: Non weathertight, installation) |
| DIN 83100-2-2002 |
重型船门.第2部分:防风雨(ISO型),设计细则 |
(Heavy hinged doors on ships - Part 2: Weathertight (ISO-type), design details) |
| DIN 83100-3-2002 |
重型船门.第3部分:防风雨(ISO型),安装 |
(Heavy hinged doors on ships - Part 3: Weathertight (ISO-type), installation) |
| DIN 83104-1985 |
重型船门和舱口盖的窗搭闩的搭扣 |
(Dogs for heavy hinged doors on ships and for hatches) |
| DIN 83105-2002 |
重型船门的吊钩 |
(Hinges for heavy hinged doors on ships) |
| DIN 83106-1984 |
船上重型铰链门和舱口盖的成型密封件 |
(Gaskets for heavy hinged doors on ships and for hatches) |
| DIN 8311-1972 |
钟表技术的计时机构.要求.检验 |
(Timing machines for horology; requirement, testing) |
| DIN 8312-1-1975 |
小型钟表及其机件的技术要求和检验.带瓦式擒纵装置的小型钟表 |
(Technical requirements and verification for watches and watch movements; watches with pallet lever escapement) |
| DIN 8312-2-1975 |
小型钟表及其机件的技术要求和检验.带电源.振荡系统的频率≤1000Hz的小型钟表 |
(Technical requirements and verification for watches and watch movements; watches with electrical energy source, frequency of oscillating system1000 Hz) |
| DIN 8312-3-1977 |
小型钟表及其机件的技术要求和检验.带针销式擒纵装置的小型钟表 |
(Technical requirements and verification for watches and watch movements; watches with pin lever escapement) |
| DIN 8313-1-1975 |
带电源的大型钟表及其机件的技术要求和检验.振荡系统的频率≤1000Hz |
(Technical requirements and verification for clocks and clock movements with electrical energy source; frequency of oscillating system1000 Hz) |
| DIN 8313-2-1977 |
带电源的大型钟表及其机件的技术要求和检验.振荡系统的频率≤1000Hz.散装机件的交货条件 |
(Technical requirements and verification for clocks and clockmovements with electrical energy source; frequency of resonator1000 Hz, terms of delivery for clock movements) |
| DIN 8314-1-1990 |
停车时间监测仪.停车计时器.分类.概念.要求 |
(Parking control equipment; parking meters; classification, definitions, requirements) |
| DIN 8314-3-1989 |
停车时间监测表.标记 |
(Parking control equipment; letterings) |
| DIN 8318-1984 |
计时器用的放射性发光油漆.概念.要求.检验 |
(Radioluminescent deposits used for horological instruments; terms, requirements, testing) |
| DIN 8319-1-1980 |
精确测时计.带有振荡系统频率≤1000Hz的手表式精确测时计.概念.要求.检验 |
(Chronometer; wrist-chronometer with frequency of oscillating system1000 Hz, designation, requirements, testing) |
| DIN 8319-2-1978 |
精确测时计.带有压电振荡系统瓣手表式精确测时计.概念.要求.检验 |
(Chronometer; wrist chronometer with piezo-electric oscillating system, designation, requirements, testing) |
| DIN 83200-1976 |
船用梯子.一览表.安装 |
(Ladders on ships; summary of types, installation) |
| DIN 83202-1-1979 |
船用立式梯子.轻型 |
(Ladders on ships, light type) |
| DIN 83202-2-1979 |
船用立式梯子.中型 |
(Ladders on ships, medium type) |
| DIN 83202-3-1979 |
船用立式梯子.重型 |
(Ladders on ships, heavy type) |
| DIN 83205-1984 |
船舶机舱和锅炉舱的栏杆 |
(Railings in ships` engine rooms and boiler rooms) |
| DIN 83206-1979 |
船舶机舱和锅炉舱的梯子 |
(Sloping ladders in ships` engine rooms and boiler rooms) |
| DIN 83207-1973 |
船舶机舱和锅炉舱的梯子踏板 |
(Steps for stairs in ships` engine rooms and boiler rooms) |
| DIN 83208-1979 |
船舶机舱和锅炉舱的梯子护板 |
(Protecting plates for sloping ladders in ships` engine rooms and boiler rooms) |
| DIN 83209-1982 |
船上的桅杆.柱子.墙壁上的扶手和脚蹬 |
(Handrails and footrails at masts, posts and walls on ships) |
| DIN 83210-1982 |
船舷外作业的梯子.踏级 |
(Sloping ladders for the outside area on ships; treads) |
| DIN 83212-1-1991 |
海轮上的游泳池.安全技术要求和检验 |
(Swimming pools on sea going ships; safety requirements and testing) |
| DIN 83212-2-1991 |
海轮上的游泳池.游泳池爬梯.安全技术要求和检验 |
(Swimming pools on sea going ships; pool ladder; safety requirements and testing) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com