标准号 |
中文名称 |
英文名称 |
DIN 58959-9 Bb.1-1997 |
医疗微生物学中质量管理.第9部分:培养基检验用对照菌株的要求.常用培养基用对照菌株 |
(Quality management in medical microbiology - Part 9: Requirements for the use of control strains for testing culture media; control strains for commonly used culture media) |
DIN 58959-9 Bb.2-1997 |
医疗微生物学中的质量管理.第9部分:培养基检验用装入控制菌株的要求.立即可使用的培养基的最大保存时间 |
(Quality management in medical microbiology - Part 9: Requirements for the use of control strains for testing culture media; maximum storage times for ready to use culture media) |
DIN 58959-9-1997 |
医疗微生物学中质量管理.第9部分:培养基检验用对照菌株的要求 |
(Quality management in medical microbiology - Part 9: Requirements for the use of control strains for testing culture media) |
DIN 58960-1-1988 |
分析试验用的光度计.应用物理化学的基础过程 |
(Photometers for analytical tests; used physical-chemical basic processes) |
DIN 58960-2-1997 |
分析试验用的光度计.技术结构.分类.件.概念 |
(Photometer for analytical tests - Part 2: Technical design; classification, components, concepts) |
DIN 58960-3-1988 |
分析试验用的光度计.吸收光度计技术性能特性的概念 |
(Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers) |
DIN 58960-4-1991 |
分析试验用光度计.供用户用的技术数据的说明要求 |
(Photometer for analytical tests; requirements for the description of technical data for the user) |
DIN 58962-1-1994 |
医疗微生物学.下呼吸道感染诊断.第1部分:概念.一般要求 |
(Medical microbiology - Diagnosis of infections of the lower respiratory tract (LRT) - Part 1: Terminology, general requirements) |
DIN 58962-2-1994 |
医疗微生物学.下呼吸道感染诊断.第2部分:显微分析 |
(Medical microbiology - Diagnosis of infections of the lower respiratory tract (LRT) - Part 2: Microscopic examination) |
DIN 58962-3-1996 |
医疗微生物学.下呼吸道感染诊断.第3部分:细菌和真菌验证用培养研究 |
(Medical microbiology - Diagnosis of infections of the lower respiratory tract - Part 3: Cultural examination for the detection of bacteria and fungi) |
DIN 58963-1-1990 |
光度测量用比色计.概念 |
(Optical cells for photometric measurements; concepts) |
DIN 58963-2-1983 |
光度测量用比色计.精密矩形比色计.尺寸.要求 |
(Optical cells for photometric measurements; precision rectangular spectrophotometric cells; dimensions, requirements) |
DIN 58963-3-1993 |
光度测量用比色计.塑料制一次性矩形比色计.尺寸.要求 |
(Optical cells for photometric measurements; disposable rectangular spectrophotometric cells; dimensions, requirements) |
DIN 58967-10-1994 |
传染病和免疫性疾病的血清学诊断.概念.一般要求 |
(Serodiagnosis of infectious diseases and diseases of the immune system; part 10: concepts, general requirements) |
DIN 58967-20-1989 |
传染病和免疫性疾病的血清学诊断.间接的免疫荧光试验.(IIFT)一般方法的特定要求 |
(Serodiagnosis of infectious and immune diseases; indirect immunofluorescencetest (IIFT); general methodical specific requirements) |
DIN 58967-30-1999 |
传染病和免疫性疾病的血清学和分子生物学诊断.第30部分:ELISA(酶链免疫分析).概念.一般方法的特殊要求 |
(Diagnostics of infectious diseases and diseases of the immune systems in serological and molecularbiology - Part 30: ELISA (Enzyme-Linked-Immuno-Sorbent-Assay); terms, general method-specific requirements) |
DIN 58967-40-1994 |
传染病和免疫性疾病的血清诊断.免疫缺陷(IB).概念.一般方法特殊的要求 |
(Serodiagnosis of infectious diseases and diseases of the immune system; immunoblot (IB); part 40: terms, general method-specific requirements) |
DIN 58967-60-2001 |
传染病和免疫性疾病的血清学诊断和分子生物学诊断.第60部分:聚合酶链式反应.术语、一般方法和特殊要求 |
(Diagnostics of infectious deseases and deseases of the immune system in serology and molecular biology - Part 60: Polymerase chain reaction (PCR); Terminology, general method-specific requirements) |
DIN 58968-20-1990 |
免疫学.免疫性疾病的血清诊断.间接免疫荧光试验(IIFT).自抗抗体检测的特殊要求 |
(Immunology; serodiagnosis of immune diseases; indirect immunofluorescence test, special requirements for the detection of autoantibodies) |
DIN 58969-10-1989 |
医用微生物学.传染疾病的血清学诊断.补体接合反应(KBR) |
(Medical microbiology; serodiagnosis of infectious diseases; complement fixation reaction) |
DIN 58969-41-1994 |
医用微生物学.传染病的血清诊断.免疫缺陷斑(IB).检测人后天获得免疫缺乏病毒HIV-1或HIV-2抗体的特殊要求 |
(Medical microbiology; serodiagnosis of infectious diseases; immunoblot (IB); part 41: special requirements for the detection of antibodies against Human Immunodeficiency Virus HIV-1 or HIV-2) |
DIN 58969-44-2005 |
医用微生物学.传染病的血清和分子生物学诊断.第44部分:免疫印染(IB).Borrelia burgdorferi的抗体检测的特殊要求 |
|
DIN 58969-44-2005 |
医用微生物学.传染病的血清和分子生物学诊断.第44部分:免疫印染(IB).Borrelia burgdorferi的抗体检测的特殊要求 |
|
DIN 58969-61-1997 |
医用微生物学.传染病的血清诊断.第61部分:聚合酶链锁反应(PCR).人体免疫缺乏症病毒HIV-1和HIV-2的核酸顺序 |
(Medical microbiology - Serodiagnosis of infectious diseases - Part 61: Polymerase chain reaction (PCR); special requirements for the detection of nucleic acid sequences of the Human Immunodeficiency Viruses HIV-1 and HIV-2) |
DIN 58969-62-2003 |
医用微生物学.血清学和分子生物学中传染病的诊断.第62部分:聚合酶链锁反应(PCR).结核分支杆菌复合体(MTC)的 |
(Medical microbiology - Diagnosis of infectious diseases in serology and molecular biology - Part 62: Polymerase chain reaction (PCR); Special requirements for the detection of nucleic acid sequences of the mycobacterium tuberculosis complex (MTC)) |
DIN 58970-1-1996 |
试验室用离心机.第1部分:概念.要求.标识 |
(Laboratory centrifuges - Part 1: Definitions, testing, marking) |
DIN 58970-2-1982 |
试验室用离心机.RZB在4000以下的离心机管 |
(Laboratory centrifuges; centrifuge tubes for relative centrifugal acceleration up to 4000) |
DIN 58971-1-1979 |
专门化验室医学;血清或血浆中L-天门冬酸转氨敏的测定.标准方法 |
(Special laboratory medicine; determination of L-aspartate: 2-oxoglutarate aminotransferase (aspartataminotransferase) in serum or plasma, standard method) |
DIN 58972-1-1979 |
专门实验室医学.正磷单酯碱性磷酶的测定.标准方法 |
(Special laboratory medicine; determination of orthophosphoric monoester phosphohydrolase alkaline phosphatase in serum, standard method) |
DIN 58974-1-1982 |
专用化验室医学.全血.血浆.体液及尿液中的D葡萄糖测定.乙糖激敏-G6P-DH方法 |
(Special laboratory medicine; determination of substrate concentration, D-glucose in whole blood, plasma, cerebrospinal fluid as well as urine; hexokinase-G6P-DH-method) |
DIN 58976-1-1982 |
专门实验室医学.L-丙氨酸测定.血清或血浆中二氧代二酸转氨酶(a-丙氨酸转氨酶ALAT)的测定.标准方法 |
(Special laboratory medicine; determination of L-Alanine: 2-oxoglutarate aminotransferase (Alaninaminotransferase) in serum or plasma; standard method) |
DIN 58977-1-1983 |
专门实验室医学.ATP测定.血清或血浆中肌酸-N-磷转移酶[肌酸酶(CK)];标准方法 |
(Special laboratory medicine; determination of ATP: creatine-N-phosphotransferase creatinase (CK) in serum or plasma; standard method) |
DIN 58981-1-1984 |
医用微生物学;颜料;噻嗪颜料.天蓝色B |
(Medical microbiology; dyes; Azure B thiazine dye) |
DIN 58981-2-1985 |
医用微生物学;颜料;咕砘颜料.荧光素衍生物曙红料Y(=G) |
(Medical microbiology; dyes; xanthene dye, fluorescein derivate eosin Y (=G)) |
DIN 58981-3-1985 |
医用微生物学;颜料;噻嗪颜料劳氏紫 |
(Medical microbiology; dyes; thionin thiazine dye) |
DIN 58984-1-1984 |
专门化验室医学;血清.血浆.尿和其它体液中无机物的测定;用原子吸收分光法测定钙含量 |
(Special laboratory medicine; determination of inorganic substances in serum, plasma, urine and other body fluids; determination of calcium by atomic absorption spectrometry) |
DIN 58995-1-1985 |
医用微生物学;颜料使用方法;Romanowsky-Giemsa染色法 |
(Medical microbiology; methods of use dyes; Romanowsky-Giemsa stain) |
DIN 5901-1-1965 |
20kg/m以下的钢轨 |
(Rails up to 20 kg/m) |
DIN 5901-2-1965 |
20kg/m以下的钢轨.扁平鱼尾板.角形鱼尾板 |
(Rails up to 20 kg/m; Flat Fishplates, Angle Fishplates) |
DIN 5902-1-1968 |
20kg/m以上的钢轨 |
(Rails over 20 kg/m) |
DIN 5902-2-1968 |
20kg/m以上的钢轨.扁平鱼尾板.关节形鱼尾板 |
(Rails over 20 kg/m; flat fishplates, angle fishplates) |
DIN 5903-1-1997 |
鱼尾板螺钉.第1部分:带半圆头和椭圆颈 |
(Fish bolts - Part 1: With round head and oval neck) |
DIN 5903-2-1997 |
鱼尾板螺钉.第2部分:带方头 |
(Fish bolts - Part 2: With square head) |
DIN 59051-1981 |
棒钢.热轧尖棱丁字钢.尺寸.重量.允许偏差 |
(Steel Bars; Hot Rolled Sharp-edged T-bars; Dimensions, Weights, Permissible Deviations) |
DIN 59051-2004 |
钢棒.热轧锐缘丁字钢.尺寸、质量和公差 |
|
DIN 5908-1965 |
20kg/m以下用于600mm轨距的钢轨 |
(600 mm track rails for ties up to 20 kg/m) |
DIN 591-1-1989 |
带清洗孔的L15级地下室排水沟.装配 |
(Floor drains class L 15 with cleaning eye - Summary) |
DIN 591-2-1989 |
带清洗孔的L15级地下室排水沟.零件 |
(Floor drains class L 15 with cleaning eye - Components) |
DIN 5911-1965 |
压制道钉 |
(Rail spikes, pressed) |
DIN 59110-1962 |
轧制钢丝.尺寸.允许偏差.重量 |
(Steel Wire Rod; Dimensions, Permissible Variations, Weights) |
DIN 59115-1972 |
螺钉.螺母和铆钉用轧制钢丝.尺寸.允许偏差.重量 |
(Steel Wire Rod for Bolts, Nuts and Rivets; Dimensions, Permissible Variations, Weights) |
DIN 5912-1965 |
锻制道钉 |
(Rail spikes, forged) |
DIN 59130-1978 |
棒钢.螺钉和铆钉用热轧圆钢.尺寸.允许尺寸和形状偏差 |
(Steel Bars; Hot Rolled Round Steel for Bolts and Rivets; Dimensions, Permissible Deviations on Dimension and Form) |
DIN 5914-1965 |
方头枕轨螺钉 |
(Baseplate screws with rectangular head) |
DIN 59145-1985 |
板簧用半环形窄边的热轧弹簧钢.尺寸.重量.允许偏差.静态值 |
(Hot rolled steel strip with semicircular edges for leaf springs; dimensions, masses, permissible deviations, moment of inertia) |
DIN 59146-1992 |
板簧用圆角长方形截面热轧弹簧钢.尺寸.极限偏差.重量.静态值 |
(Spring steel; hot rolled, with rectangular cross-section and rounded edges, for leaf springs; dimensions, tolerances, masses, sectional properties) |
DIN 5917-1965 |
双轨枕用带环形螺母和垫圈的连接螺钉 |
(Coupling screws with collar nub and spacer for double-ties) |
DIN 59200-2001 |
扁钢产品.热轧宽扁材.尺寸、质量及尺寸、形状和质量公差 |
(Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass) |
DIN 59220-2000 |
扁轧钢产品;带图形的热轧薄钢板.尺寸,重量,尺寸偏差,形状和质量 |
(Flat products of steel - Hot rolled patterned plate - Dimensions, mass, tolerances on dimensions, shape and mass) |
DIN 59231-1953 |
瓦楞薄钢板.镀锌钢桶钢板 |
(Corrugated Sheet, Tile Sheet; Galvanized) |
DIN 59350-1982 |
精制扁钢和方钢.尺寸.重量.允许偏差 |
(Precision flat and square steel bars; Dimensions, weights, permissible deviations) |
DIN 59370-1978 |
等腰尖棱光拔角钢.尺寸.允许偏差.重量 |
(Steel Sections; Bright Square Edge Equal Angles; Dimensions, Permissible Deviations, Weights) |
DIN 59413-1976 |
冷轧型钢.尺寸、形状和重量的允许偏差 |
(Cold Rolled Steel Sections; Permissible Variations on Dimensions, Form and Weight) |
DIN 59610-2004 |
铅和铅合金.通用轧制铅薄板 |
(Lead and lead alloys - Rolled lead sheet for general purposes) |
DIN 59610-2004 |
通用轧制铅薄板 |
|
DIN 59740-1975 |
镍和镍塑性合金热轧薄板和板条.尺寸.允许偏差 |
(Sheets of wrought nickel and nickel alloys, hot rolled; dimensions, tolerances) |
DIN 59740-2004 |
锻镍和锻镍合金热轧薄板.尺寸及尺寸与形状公差 |
|
DIN 59742-1975 |
镍和镍塑性合金热轧圆片坯料和环坯.尺寸.允许偏差 |
(Circular blanks and rings of wrought nickel and nickel alloys, hot rolled; dimensions, tolerances) |
DIN 59742-2004 |
锻镍和锻镍合金热轧圆片坯料和环坯.尺寸及尺寸与形状公差 |
|
DIN 59745-1974 |
镍和镍塑性合金冷轧薄板和板条.尺寸.允许偏差 |
(Sheet of wrought nickel and nickel alloys cold rolled; dimensions, tolerances) |
DIN 59745-2004 |
锻镍和锻镍合金冷轧薄板.尺寸及尺寸与形状公差 |
|
DIN 59746-1974 |
镍和镍塑尾合金冷轧带材和带条.尺寸.允许偏差 |
(Strips of wrought nickel and nickel alloys, cold rolled; dimensions, tolerances) |
DIN 59746-2004 |
锻镍和锻镍合金冷轧直带形带材和薄板.尺寸及尺寸与形状公差 |
|
DIN 59755-1974 |
冷加工的镍和镍塑性合金管.尺寸.允许偏差 |
(Tubes of wrought nickel and nickel alloys, cold worked; dimensions, tolerances) |
DIN 59760-1974 |
热轧的镍和镍塑性合金圆棒.尺寸.允许偏差 |
(Round rod of wrought nickel and nickel alloys, hot rolled; dimensions, tolerances) |
DIN 59761-1974 |
热轧的镍和镍塑性合金方棒.尺寸.允许偏差 |
(Square rods of wrought nickel and nickel alloys, hot rolled; dimensions, tolerances) |
DIN 59762-1974 |
热轧的镍和镍塑性合金六角棒.尺寸.允许偏差 |
(Hexagonal bars of wrought nickel and nickel alloys, hot rolled; dimensions, tolerances) |
DIN 59763-1974 |
热轧的镍和镍塑性合金矩形棒.尺寸.允许偏差.静态值 |
(Rectangular bars of wrought nickel and nickel alloys, hot rolled; dimensions, tolerances, static values) |
DIN 59765-1974 |
拉制的镍和镍塑性合金圆棒;尺寸.允许偏差 |
(Rounds rods of wrought nickel and nickel alloys, drawn; dimensions, tolerances) |
DIN 59766-1974 |
拉制的镍和镍塑性合金方棒;尺寸.允许偏差 |
(Square rod of wrought nickel and nickel alloys, drawn; dimensions, tolerances) |
DIN 59767-1974 |
拉制的镍和镍塑性合金六角棒.尺寸.允许偏差 |
(Hexagonal rod of wrought nickel and nickel alloys, drawn; dimensions, tolerances) |
DIN 59768-1974 |
拉制的镍和镍塑性合金尖棱矩形棒;尺寸.允许偏差.静态值 |
(Rectangular bar of wrought nickel and nickel alloys, drawn with sharp edges; dimensions, tolerances, static values) |
DIN 59780-1974 |
热轧的镍和镍塑性合金圆线.尺寸.允许偏差 |
(Round wire of wrought nickel and nickel alloys, hot rolled; dimensions, tolerances) |
DIN 59781-1974 |
拉制的镍和镍塑性合金圆线.尺寸.允许偏差 |
(Round wire of wrought nickel and nickel alloys, drawn; dimensions, tolerances) |
DIN 59782-1974 |
拉制的镍和镍塑性合金方线.尺寸.允许偏差 |
(Square wire of wrought nickel and nickel alloys, drawn; dimensions, tolerances) |
DIN 59783-1974 |
拉制的镍和镍塑性合金六角线.尺寸.允许偏差 |
(Hexagonal wire of wrought nickel and nickel alloys, drawn; dimensions, tolerances) |
DIN 60000-1969 |
纺织品.基本概念 |
(Textiles, basic terms and definitions) |
DIN 60001-1-2001 |
纺织纤维.第1部分:天然纤维和字母代码 |
(Textile fibres - Part 1: Natural fibres and letter codes) |
DIN 60001-2-1990 |
纺织纤维材料.纤维形状和生产方式 |
(Textile fibres; forms of fibres and manufacturing) |
DIN 60004-1974 |
羊毛.原料的概念 |
(Wool; terms and definitions for raw material) |
DIN 60011-1958 |
亚麻纤维.粗加工阶段 |
(flax fibre; processing phases) |
DIN 60012-1958 |
亚麻纺纱厂的工序 |
(Phases of operation in flax spinning) |
DIN 60013-1958 |
黄麻纺纱厂的工序 |
(Phases of operation in jute spinning) |
DIN 60021-1975 |
粗纺产品和精纺前的产品.概念 |
(Products of fibre preparing and preparatory spinning, terms and definitions) |
DIN 60050-1976 |
亚麻纱 |
(Linen yarns) |
DIN 60105-1983 |
用韧皮纤维纺织法纺出的纱线 |
(Yarns produced on bast fibre spinning systems) |
DIN 60150-1984 |
硬质纤维纱 |
(Hard fibre yarns) |
DIN 603-1981 |
方颈平圆头螺栓 |
(Mushroom head square neck bolts) |
DIN 60300-1990 |
棉纺纱线 |
(Yarns produced on cotton spinning systems) |
DIN 604-1981 |
带榫的沉头螺钉 |
(Flat countersunk nib bolts) |
DIN 60410-1983 |
精梳纱 |
(Worsted yarns) |
DIN 60411-1990 |
粗纺毛纱 |
(Woollen yarns) |
DIN 60414-1990 |
半精梳毛纱 |
(Semi-worsted yarns) |
DIN 60415-1965 |
洗毛车间和精梳车间的工序 |
(Operations in wool washing and combing) |
DIN 60416-1965 |
精梳毛纺工艺流程的工序 |
(Operations in worsted spinning) |
DIN 6049-1998 |
包装材料.椭圆形的大口包装玻璃容器 |
(Means of packaging - Packaging glas with wide mouth, oval) |
DIN 605-1981 |
高方颈沉头螺钉 |
(Flat countersunk square neck bolts, with long square) |
DIN 60550-1984 |
丝织造纱 |
(Silk yarns for weaving purposes) |
DIN 6063-1-2004 |
主要用于塑料容器的螺纹.第1部分:锯齿螺纹.尺寸 |
(Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions) |
DIN 6063-1-2004 |
主要用于塑料容器的螺纹.第1部分:锯齿螺纹尺寸 |
|
DIN 6063-2-2004 |
主要用于塑料容器的螺纹.第2部分:梯形螺纹.尺寸 |
(Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions) |
DIN 6063-2-2004 |
主要用于塑料容器的螺纹.第2部分:梯形螺纹尺寸 |
|
DIN 607-1981 |
带榫的半圆头螺栓 |
(Cup head nib bolts) |
DIN 6075-1-1997 |
包装材料.瓶.第1部分:维希型1 |
(Means of packaging - Bottles - Part 1: Vichy-shape 1) |
DIN 6075-2-2000 |
包装材料.瓶.第2部分:维希(Vichy)型2 |
(Means of packaging - Bottles - Part 2: Vichy-shape 2) |
DIN 6078-1991 |
包装材料.可多次使用的葡萄酒瓶.木槌型 |
(Packaging; multi-way mallet form wine bottles) |
DIN 608-1981 |
短方颈沉头螺栓 |
(Flat countersunk square neck bolts, with short square) |
DIN 6080-1991 |
包装材料.0.75l可多次使用的葡萄酒瓶.勃艮弟型 |
(Packaging; 0,75 l multi-way burgundy wine bottles) |
DIN 609-1995 |
六角头长螺纹圆柱端配合螺钉 |
(Hexagon fits bolts with long thread) |
DIN 60900-1-1988 |
纱线和捻线.工艺分级 |
(Yarns; technological classification) |